Type display for slideshow and subscribe

Visual concern only, but how do you change the clunky bold helvetica style of the >play slideshow and >subscribe links, and photo captions when viewed in iWeb? I want to make them more subtle, less bold. I can do it in iPhoto, but doesn't seem to translate to iWeb.
no, not visually in iweb but can be changed when the page is online with javascript and understanding of photos page widgets: http://temp.cyclosaurus.com/CSSChanged/Photos.html

Similar Messages

Play Slideshow and Subscribe links don't work in IE

Hi, I published a site with the newest version of iWeb and the Play Slideshow and Subscribe links don't work for my friends who use IE. Also, only some of the pictures will open when clicked. Many of them do nothing when clicked.
Here's an example:
http://web.mac.com/jconstant/Scotland/Golfing.html
The site works with Safari and Firefox (both Mac and PC) but people with several different versions of IE experience the same problem.
Any ideas on how this can be fixed?

Thanks for your reply. The problem is the whole page is one image and there should be several clickable areas which point to different links.
To solve this we have put a textbox over the clickable area, disabled the background and stroke and then right clicked on the textbox and used the hyperlink option to turn the whole box in to a hyperlink.
We tried several free PDF convertors which couldn’t handle this combination. Then we trailed it with the full desktop version of Adobe Acrobat Pro and it worked a treat. Unfortunately the client didn’t have that software so we signed them up to the online PDF convertor from Adobe and that isn’t handling it.
Here's the sample document: Dropbox - sample-link.docx we have been doing the tests with.

Parents need an ipad2/3 holder like otter box which any tripod can be screwed into in order to video childrens events. It must have gear type adjustments for verticle and horitontal ajustments due to weight of ipad

Parents need an ipad2/3 holder like otter box which any tripod can be screwed into in order to video children's events. It must have gear type adjustments for vertical and horizontal adjustments due to weight of ipad

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

What is Condition formula/call type/routines for ECS and SECess

HI
what is Condition formula/call type/routines for ECS and SECess (SECONDARY HIGHER EDU CESS) to assign pricing procedure
JFACT.

ECS reqt is 10 and a/c key os2
SECess reqt is 10 adn a/c key os3

TypeError : unsupported operand type(s) for + : 'NoneType' and 'str' - UCM

Hi All,
I got below error while creating weblogic domain in UCM.
Successfully installed Oracle,RCU and weblogic while creating domain i got error, Please any one know how to create domain. Let me know.
Error :::
Domain Creation Failed!
Domatin Location :
C:\Oracle\Middleware\user_projects\domains\base_domain
Reasion : null
Exception:
Traceback ( innermost last):
File "<iostream>", line 17, in?
TypeError : unsupported operand type(s) for + : 'NoneType' and 'str'
Version : Orcle ECM version 11.1.1.3
weblgoic server 10.3 windows 7 (32bit)
oracle 11g
--------------------------------------------------------------------------------------------------------------------------------------------

Are you sure that you're using the correct config.bat or config.sh? There are multiple and it's very easy to mistakenly use the incorrect one if you're not paying very close attention.
If you're sure you're using the correct config script, then make sure that you execute the commEnv.bat or commEnv.sh and setWLSEnv.bat or setWLSEnv.sh before running the config script. These files will set some variables that the script will be looking for.
Let us know if that helps!
Thanks,
-ryan
Ryan Sullivan | ECMconsultant
http://www.ecmconsultant.net/

BTE for Publish and Subscribe Interface

CAN anyone tell me BTE tell me an example of Publish and Subscribe Interface?
What is that use for?
How does it get triggred?

Business Transaction Events (BTE) allow you to attach additional components, in the form of a function module, for example, to the R/3 system.
     Two types of interface are available for this purpose:
Publish & Subscribe interfaces:
 These interfaces inform external software that certain events have taken place in an SAP standard application and provide them with the data produced. The external software returns no data to the SAP Standard System.
Process interfaces :
These interfaces are used to control a business process differently than the way in which it is handled in the standard R/3 System. They intervene in the standard process, and return data to the SAP application.
Publish & Subscribe interfaces:
Allow you to start one or more (multiple) additional operations when a particular event is triggered. They do not influence the standard R/3 program in any way.
Multiple operations do not interfere with each other.
Add on components can only import data.
Additional checks (authorizations, existing duplicates, and so on)
The program contains an enhancement in the form of a Business Transaction Event. A function module is called in the SAP program, which determines and processes the active implementations. The names of the event function modules begin with "OPEN_FI_PERFORM_" or "OUTBOUND_CALL_".
     The event function module OPEN_FI_PERFORM_<u2026> or OUTBOUND_CALL_<u2026> determines the active implementations for each enhancement and stores them in an internal table. Function modules are implemented in the sequence defined by the internal table. At this point the system also considers the conditions under which the function module will be processed in the customer namespace. For example, a country or an application can be entered as a condition. These conditions are also referred to as filter values.
In case of publish and subscribe interface :
In this case, data only flows in one direction - from the SAP application to the additional component.
     SAP application developers make interfaces available to you at certain callup points in a transaction. You can define additional logic at these points.
     In a very basic scenario, SAP partners and customers can use the interfaces themselves. In this case business transaction events function in much the same manner as customer exits (see the unit on "Enhancements using Customer Exits").
*Implementing a BTE*
     You can use transaction FIBF (called when you selected Use business transaction events from the financial accounting hierarchy) to carry out all necessary activities prior to using a business transaction event.
     First, choose an interface to which you would like to attach your function module. The Interface button displays the parameter structure for the interface you have selected. You can also use the documentation to determine what functions each interface allows you to perform.
     Use the ABAP Workbench to copy the sample function module sample_interface_<n> to the customer namespace (z_*) of a customer function group. You must not change the interface. You can fill the module with any source text except COMMIT WORK. Do not use a COMMIT WORK! Don't forget to activate the function module.
     Create a product in the administration screen.
     Assign a number to your function module and product.
     In contrast to customer exits, business transaction events are client-specific. This means that the same event can be used in different clients for different purposes.
     Business transaction events may also be used more than once

What is Best Practice for Publishing and Subscribing to Multicast Video P2P

Please, could someone help with an issue I am having in developing a peer to peer video chatting application? My application uses multicast to publish and subscribe to video streams of NetGroup members. I'm listening for the NetGroup.Neighbor.Connect event, and I'm calling the following function:
protected function onPeerConnect(event:NetStatusEvent):void{
                var peerID:String = event.info.peerID;
                // create user vo here
                // user Value Object for incoming stream
                userVO = new User();
                userVO.peerID = peerID;
                netGroup.addNeighbor(peerID);
                receiveStream(userVO);
protected function receiveStream(userVO:User):void{
                // init netstream
                var stream:NetStream = new NetStream(nc,groupspec.groupspecWithAuthorizations());
                stream.receiveVideo(true);
                stream.addEventListener(NetStatusEvent.NET_STATUS,netStatus);
                // init panel
                // alter to use custom component instead
                var panel:Panel = new Panel();
                panel.id = "panel" + panel_seq;
                panel.title = "Panel" + panel_seq;
                panel.width=322;
                panel.height=281;
                panel.x = 50 * panel_seq + 200;
                panel.y = 25 * panel_seq + 200;
                var cpanelContent:Array = new Array();
                panel.controlBarContent=cpanelContent;
                panel.controlBarVisible=true;
                // init video
                var video:Video = new Video();
                video.width=320;
                video.height=240;
                video.attachNetStream(stream);
                stream.play("media");
                // init videoWrapper
                var videoWrapper:UIComponent = new UIComponent();
                videoWrapper.id = "wrapper" + panel_seq;
                videoWrapper.addChild(video);
                // add to display list
                addElement(panel);
                panel.addElement(videoWrapper);
                // drag and drop panel
                panel.addEventListener(MouseEvent.MOUSE_DOWN,function(event:MouseEvent):void{
                    panel.startDrag();
                    addElement(panel);
                panel.addEventListener(MouseEvent.MOUSE_UP,function(event:MouseEvent):void{
                    panel.stopDrag();
                panel_seq++;// used for unique panel id
                userVO.panel = panel;// reference to the panel
                userVO.stream = stream;
                userVO.video = video;
                peers.addItem(userVO);
I am confused on this:
var stream:NetStream = new NetStream(nc,groupspec.groupspecWithAuthorizations());
What should I pass as the second parameter to establish an incoming NetStream with the publishing peer? I've seen people put in the farID but I haven't figured out how to access it. What is the difference between event.info.peerID and event.info.neighbor? And since I'm multicasting to the group do I need to pass in the groupspec or the farID? I would love some clarification on this.
What is happening is this:
When I join the group, and there are two members in the group already, I'll get three panels with videos. However, duplicate video streams are being attached. When I inspect the peerStreams array I'm seeing a length of 0, so does that mean that no one is subscribing to my published netstream? If so, how do I specifically subscribe to each published stream in the group? Sometimes if I step through in debug mode, I get three separate camera feeds in their prospective panels, but if I run it will have duplicates. I thought at first that this was a referencing error because all of the NetGroup.Neighbor.Connect events where happening all at the same time and perhaps that is the reason for the duplicates?
My only other thought is that maybe I'm multicasting one guys stream to the whole group, but I'm getting varying results so I want to know what is the correct way to grab, in sequence, a NetGroup members' published netstream and be sure that all other members are subscribing to my NetStream as well?
Also, I am using Value Objects to keep track of who my group members are, is that data shared with the group or is it not accessible to all members?   or should I use another method of keeping track of my group members?
Please help! Thank you in advance!

it appears you posted an identical message in two threads. i've responded in the other thread:
http://forums.adobe.com/message/3701380#3701380

How can I use my TV as a display for FaceTime and the camera of my MacBook when connecting it to the TV via HDMI?

I can connect my MacBook to my TV via HDMI and when I FaceTime everything works normally except I would like the display for the MacBook to be turned off so I can see video only on my TV. Closing the lid is not an option since I am using the MacBook's camera to FaceTime. Is there any way to achieve this?

Shivneet wrote: ... I would like the display for the MacBook to be turned off so I can see video only on my TV. ... Is there any way to achieve this?
Not that I could find.
The easiest workaround that I could find is a trimmed piece of Black Construction Paper taped over the Mac's display.
Alternatively, you could use an external Mac Compatible Web Cameras and then close the lid, but that is a higher cost option.
Message was edited by: EZ Jim
Mac OSX 10.8.4

How to create new Wage type specifically for IT14 and IT15 only

Hi Gurus,
I was assigned to create a new wage type to be used for Infotypes 14 and 15 only.
Another thing is to have this for % deduction rather than having a fixed amount ($).
Appreciate all your help.
thanks!

FOR IT0014
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >CREATE WAGE TYPE CATALOG
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >Check wage type group 'Recurring Payments and Deductions
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >CHECK ENTRY PERMISSIBILITY PER INFOTYPE
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >Define Wage Type Permissibility for each PS and ESG
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >Check wage type characteristics
FOR IT0015
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >CREATE WAGE TYPE CATALOG
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >Check wage type group ADDITIONAL PAYMENTS
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >CHECK ENTRY PERMISSIBILITY PER INFOTYPE
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >Define Wage Type Permissibility for each PS and ESG
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >Check wage type characteristics
Last step of the both set you ( V_T511) have to define the indirect valuation method ( PRZNT, SUMME Etc)
Don't forget to maintain V_T539J, the place where you defining your component is a percentage of another component

Delayed Data Display for Tables and Views

Is it possible to delay the display of data for data and views.
I work on remote databases over relatively slow ADSL/Dialup connections when compared to a LAN/WAN.
If the tables are large, the data retrieved can be relatively slow and therefore the setting of a filter before display would reduce the amount of data retrieved and enable the viewing of the attributes, statistics etc in a timely manner

AL_INDEX and AL_COLMAP store metadata of tables that you import in Datastore
AL_COLMAP and AL_COLMAP_TEXT table store column mapping information that use in Dataflow, this data is usually populated when you save Dataflow, check if the "automatically calculate column mapping" option is checked in the Tools-> Options window in Designer
if you are not seeing any data in these 2 tables, then go to Designer, select Datastore tab in object library right in the Datastore workspace select Repository menu option and select Calculate Usage Dependency once that completes do select Calculate Column Mapping from the same menu, once that completes check if you see data in these 2 tables

Need tuxedo8.1 license of type SDK (for windows and linux)

CMDTUX_CAT:4382: ERROR: You do not have a valid SDK license
I get this error when running this command -buildserver.
I downloaded the entire 8.1 package and found that it had a license of type RTK
I want a License of type SDK with JOLT.
If anyone has one, please do send me.
I need SDK license for 8.1 and/or 9.1 (windows and/or linux).
If anyone has a license of SDK type, please send me. My mail ID: [email protected]
Also, how do we update the license in window?
thanks in advance,
Anish Kumar

Hi Anish,
Assuming you are covered by the appropriate licenses, you may download license keys for Tuxedo and related products here . Append the license key files you require into a single file called lic.txt and place it in the udataobj directory of the Tuxedo installation.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Retina Display Support for Slideshow and Web Modules?

Hello,
I have been working on a set of images from a recent vacation and created a web gallery to display them. I am using a Retina MacBook Pro and I noticed that when loaded in the browser (Safari), the gallery images look slightly blurry - similar to "non-retina" prepared images. I also created a slideshow in the slideshow module and they look the same.
Can someone tell me if this is due to the fact that Lightroom is not rendering the preview images to be compatible with retina (HiDPI) support?
I'm very disappointed that I have invested in such an expensive piece of hardware and I'm getting such blurry looking images.
Thanks for the help.

Retina-display compatible image is just a fancy term for high resolution image. It looks blurry because of the upscaling. If you want it to look good, export it at higher resolution, for example 2048×1536px for the ipad screen size.

Richtextbox tools bar menu is not display for Firefox and chrome. Any idea why this is happening?

Hello,
I have added RichTextField in custom webpart. I have added tag like below
<SharePoint:InputFormTextBox ID="RichTextField1" runat="server" TextMode="MultiLine" RichTextMode="FullHtml" Columns="20" Rows="10" RichText="true" />
We are able to see Richtextbox tools bar menu in IE browser but it's not working for other browser like chrome and Firefox.
Can anyone suggest us why this is happening?
Any help would be appreciable.
Thanks,
Lovkesh Patel

Hi,
According to your description, my understanding is that the richtextbox tool bar menu not display in non_IE browser.
The richtext box not supported in Non-IE browser, it leads to the issue.
Here are some similar thread for your reference:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/c6482efb-72e1-4536-a3cb-153d838744a4/sharepoint-rich-text-editor-not-working-in-firefox-and-chrome
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/8133e762-d996-4672-a176-aa37f45c46c0/sharepoint-text-control-with-rich-text-edit-tools-on-ribbon
Best Regards
Jerry Guo
TechNet Community Support

Locking secondary display for slideshow. Auto Export after tethered shooting?

I use LR 3.5 when I shoot tethered. It seems the upgrade to 3.5 helped with the inconsistent connection problem on my D3. I still get dropped but not as often.
Thanks for working on that.
I've been using LR for a photo booth arrangement. I add logos using watermarks. As I shoot; the images display on my projector.
I am trying out the secondary display feature using my TV. Seems to be working but I want to lock the secondary screen onto Lightroom.
When I go to another application the secondary screen goes away and I get a standard apple screen shot. Is there a way to lock it so I can use another application on my Macbook Pro?
I need to use a Polaroid GL10 printer for an event and have to use Polaroid's software. There is no print driver yet for this.
So I have to export images from LR3. Then import and print using Polaroid's software
I would love to see LR have an auto export function. So I can capture tethered, process images, and export images into a folder while I'm shooting.
I don't think this exists? Are there any plugins that you can recommend for this.
Thank you.
Macbook Pro 10.6.8
Nikon D3
LR 3.5

I changed it back to the url now you should see the error now.
http://dkphotos.net/Portfolio/Studio%20Photography/Outdoor/Outdoor%20Studio%20Photography. html
and that link once u open it changes to this: https://doc-0s-7g-docs.googleusercontent.com/docs/securesc/ug2dl6ngof2hegen9nqlvc6a6de2d91 a/ma2qhmo857gb9saqje9fllntlrdl6jkg/1376942400000/10099564583573154067/10099564583573154067 /0B8UhkqE2KgybcnNIXzVSM2MxVHc?e=view&h=16653014193614665626&nonce=6p4h7ef1u0o2a&user=10099 564583573154067&hash=t49tp4bkne0vevvips3l5f7flvp8bkvv
but i still keep on getting the same error when i try oppening the first image

Mat type setting for UNBW and NLAG

In std SAP system, For material types UNBW (non-valuated) there is no value update so Accounting screen is not required.But account category reference is assigned. Y it is required.
For NLAG( non-stock), both Qty and value updated are not required, but for this material Accounting screen is defined but account cat reference is not assigned.
Plz whether the above settings are std settings.
My clarification is whn value updated is not required, materia wont need accounting secreen and hence no a/c cat ref is requried.( for UNBW) so we need to define accounting screen for this mat type.
Similarly for NLAG, as value update is not required, no accounting screen is reaquired for mat master.
plz clarify

hi,
In addition to the Mr. Pankaj's reply...
You would have noticed that the gr also become the non-valuated when there are n number of the g/l accounts...
The same is the reason here also...as there is no account updated in the UNBW....but on the other hand, there could be qty update....for which the acocunt asignment wuld be required, so that the material may be used as a consumable material...
Hope its clear....
Regards
Priyanka.P

Type display for slideshow and subscribe

Similar Messages

Maybe you are looking for