Type fonts to In design not listed in memue

I am unable to find the typeface Neue Hammer Unz.. 1,2, Type 1 and alternates.to us in my Indesign form. It is installed in windows and show up in other programs to use. but not in Indesign and Illistrator. How do i install it in these 2 programs . i have tried numerous times but the error box says that it is installed do I want to over write it

Adobe sell both of its kind :
Open type : Adobe - Fonts : Neue Hammer Unziale™ Std Regular
PostScript :
Adobe - Fonts : Neue Hammer Unziale™ 1  
Adobe - Fonts : Neue Hammer Unziale™ 1 Alternate
Adobe - Fonts : Neue Hammer Unziale™ 2
Adobe - Fonts : Neue Hammer Unziale™ 2 Alternate
My question here is which version of InDesign and Illustrator and on which operating system ?
OP stated that he is able to use the font in other application and not in InDesign and Illustrator only hence I will recommend to clear the Font cache and then check.
Cleaning your font cache. - IllustratorHints
- Manish

Similar Messages

  • Font with proportional oldstyle not listed in OpenType

    Hi everybody. So, I've been working in ID CS6 with a font that definitely has a set of Proportional Oldstyle figures -- I checked, and they're in the glyphs palette -- but it seems like they wasn't tagged as that when the font was created because the OpenType menu says it doesn't have one. Is there any way for me to override this and assign that set of figures to OpenType, or is it just not a font I can use? (I mean, without going through and manually changing every figure in the book.)
    Thanks so much!

    See, they aren't listed as alternates, they're just separate glyphs. Originally I thought that was what the problem was -- they don't appear to be tagged as anything. So they exist for the typeface, but they don't show up in any menus, and if I were threading the book, it's looking like I would have to go in and manually change every figure, including page numbers. I can buy an .otf version, but I was hoping to avoid that. So it might just be that I'm trying to use a font for a purpose I shouldn't try to use it for...

  • Boot Camp users using XP via Boot Camp - Can you install Open Type Fonts?

    Have any of the Boot Camp 2.1 users that have been using Windows XP via Boot Camp been able to install Open Type Fonts, i.e. fonts that are sold by Adobe?
    I have now tried this on two new MacBook Pros, and I have tried three different retail versions of Windows XP on each system. It just does not work.
    I keep getting the "Unable to Install Font" message, which suggests that I contact the font vendor, which I have. I have also tried many different versions of different fonts.
    After having investigated with Adobe and Microsoft, and after having reinstalled Windows over 6 times on two different new MacBook Pros, I am starting to believe that this issue affects all new MacBook Pros and/or Boot Camp 2.1 users.
    For some points, could someone please try to install an Open Type Font in Windows XP, and let me know if you are successful?
    Thank you very much!

    Experiencing the same from a fresh install of Windows XP on Boot Camp 2.1.
    Tried 2 different scenarios. Installed Windows XP, Boot Camp Drivers, Open Type Fonts. Received an not a valid font file when trying to install. Installed Windows XP and then the Open Type Fonts. All fonts registered and accessed by the operating system without the Boot Camp Drivers. Installed the Boot Camp Drivers and checked the fonts, received error messages accessing fonts.
    Pretty sure its the Boot Camp Drivers that are causing the problems with Windows and the fonts. Hopefully there is an updat to address this issue.

  • Can I use Type -- 'convert to outline' in Illustrator on Typekit fonts I've 'designated for desktop use'? I've not been able to as of yet.

    I'm trying to print vinyl letters for a gallery I'm a member of and love the Cronos Pro regular font. i've designated this for desktop use and created 24 name files at 200pt. The person working with the vinyl asked if I could 'convert to outline' possibly to make the font a bit larger, I don't really know. When I tried to do this, I found that choice grayed out on the type menu. I am wondering if this means the Typekit fonts 'designated for desktop use' simply do not have the permission to be 'converted to outline'.

    Cutting always requires proper paths/ outlines. This has nothing to do with the font or large format printing per se. Beyond that there should be no limitation in using fonts - as long as you can mangle them in AI, it means that somewhere those outlines exist internal to the program so the type can actually be rendered. Whatever prevents this may more likely be inherent in how you treat your text. you would have to provide more specific info on that. Either way, ask in the AI forum for more detailed answers.
    Mylenium

  • XP Pro Windowsw/Fonts has a font.  It is listed as available in MS Word.  It is not listed as available in Adobe Illustrator CS6.  How do I fix this?  Thanks.

    XP Pro Windowsw/Fonts has a font.  It is listed as available in MS Word.  It is not listed as available in Adobe Illustrator CS6.  How do I fix this?  Thanks.

    BobbyH5280.  Very helpful answer!  I am XP for the next week on CS6.  I did find 3 items that helped.  The fonts are in AI, but are listed on the bottom of the list.  Also in Edit/Preferences/Type, checking "Show Font Names in English" makes the font list easier to read (doesn't appear to change the sort order though), and (with your suggestion) checking "Sow Asian Options" might do something positive.  Thanks to all of you who sent in tips.

  • Photoshop fonts not listed in flash

    Hey, I've designed the graphical interface for a website in
    photoshop and now i'm trying to create animated buttons in flash.
    trouble is, the font i have used to design the site in PS is not
    listed in the flash font list. This is the case for lots of
    different fonts in PS. The original font was TTF so i converted it
    to OT1 and i've dropped a copy into all the adobe font folders I
    can find but its still not picking it up. Does flash load its fonts
    from a specific folder and if so, does anyone know which? I cant
    figure out why both TTF and OT1 versions of this font are listed in
    one CS3 app and aren't listed in the other. I've also tried image
    drag and drop from PS to flash but it just imports the text as a
    gray box. i'm really stuck here, if anyone has any advice i'd be
    really grateful. thanks.

    In my own experience, Flash takes it fonts from your system
    fonts. So you probably need to install the fonts in your system
    (Windows) as opposed to installing them in specific applications.
    I'm uncertain on this one, so if someone else has better
    information to offer, please do.

  • Movement type 342 O is not listing in MB1b T.code, hw to make it active

    Movement type 342 O is not listing in MB1b T.code, hw to make it active. i need to transfer post the materials to vendor.

    Hi,
    If it is not listed in the MB1B transaction then there is a very good reason and so just adding it is not going to work.
    342 is the transfer from restricted to unrestricted and so is related to batches. The O you mention indicates stock with subcontractor. Do you actually mean 342 and not 542?
    If you DO mean 342 then you should not try to do this via MB1B you have to use the correct process and do this via the batch functions.
    Steve B

  • MS Word not listed in Acrobat 9 supported file type (Windows 7 64 + Office 2007)

    Installation details:
    Windows 7 64bit O/S
    MS Office 2007
    Acrobat 9 Professional
    When attempting to create a PDF from multiple files or combine multiple files into one PDF (single or package/portfollio) Microsoft Word is not listed in the supported file type drop down menu. This means when I navigate to a folder containing *.doc files I cannot see them. I tried adding *.doc files via drag and drop but Acrobat listed red exclamation marks stating it could not convert that file type. MS Excel, Powerpoint and Publisher appear in the supported file type list.
    I believe this may be a Windows 7 compatibility issue as the same problem occured when using Acrobat 8 Standard prior to installing Acrobat 9 Professional. MS Word files are supported when both Acrobat 8 & 9 are installed on a Windows XP system.
    I can create a PDF of individual MS Word documents using the acrobat tab inside MS Word itself.
    I have thousands of Word files I need to combine into PDF portfollios (packages in Acrobat 8 I believe).
    My great appreciation if you can provide any help.
    Regards
    Sunny

    Bill@VT wrote:
     OK. Then do you mean the thumbnails in Windows Explorer? I don't have a solution for that, but there have been several posts about the issue.
    Well, thumbnails in Explorer don't work either, but we're not concerned about it.  The preview pane is what we're worried about.  There is a button in the top-right that turns the pane on.  Previewing in Outlook does not work either.
    Sabian Zildjian wrote:
    Check the value for AppID in this registry key:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA- 464D-8880-44885D7DC193}]
    What do you have?
    {534A1E02-D58F-44f0-B58B-36CBED287C7C}
    DisplayName is set to "@C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\pdfprevhndlr.dll,-101".

  • Windows True Type font fine in Font Book but not in some apps

    I got a Windows True Type font from a guy having some issues with it when printing website on Windows XP and I thought I'd try the font on Mac OS X 10.4.4.
    It imports fine into Font Book and previews fine. When I opened up TextEdit the font can be seen in the list of fonts, but when one selects it changes to the Monaco font instead of the "real" font seen in Font Book.
    In Word the font don't show up at all but in Photoshop it seems to work fine.
    The font is validated fine according to Font Book.
    How come it behaves like this?

    Thanks for your reply.
    "OCR-A BT" is the name of the font.
    The origin I don't know about. I just got it from a guy I barely know.
    I know there can be various problems with fonts. Just thought it was interesting that Font Book validated and showed it fine, but still it didn't seem to be all healthy since it doesn't work in all app.

  • How to search for a font not listed in the Fonts window

    I'm unable to create a PDF of an older document built by someone who doesn't work here anymore (so I can't ask how they built it). The PDF starts to generate but it takes longer than usual then right before the last page, it stops and I get a log telling me that it can't generate the PDF because of a problem with a Frutiger-Roman font. We don't use that font so I'm not sure where it would be. Also, when I look in the Fonts pod window, it's not listed.
    Is there a way to search a document to find a font that isn't listed in the Fonts pod window?
    Thanks

    Sounds like it's coming in with an import, which is probably an image, but could also be a text inset.
    I've seen this happen with DWG, DXF, EPS and EPSI imports. I'd expect it to be possible with PDF imports, as well as any formatted text inset.
    It could even be an empty string. You can't find any text, but the declaration got triggered anyway.
    Most image formats that can include fonts can be opened in Adobe Illustrator. You can then Select > Object > Text Objects and see what's there (or not). If AI throws "some objects have been outlined", you've located the offending file for sure.

  • How do i ADD a file type (such as Quicktime mov) that is NOT listed in the Content Type list?

    All the instructions I find when searching for how to ADD a file type just explain how to manage how Firefox handles that file type. And that is not possible when the file type is not in the list.

    Usually MOV is played by the QuickTime plugin. Some other plugins also may handle MOV. This is handled by entries in a hidden database, but you can view the contents if you type or paste about:plugins in the address bar and press Enter.
    In looking at your plugins list under "More System Details" I don't see QuickTime. Is it disabled (set to "never activate") on the Add-ons page? Missing?
    Tools menu > Add-ons > ''in the left column, click'' Plugins

  • Aspnet_compiler web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'

    My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
    In my web.config file, I have the following as suggested by many for solution:
    <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
     <add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
    However, the error is persisting.  I have no clue how to fix this.  Hope someone can help.

    Hello FredVanc,
    As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
    https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
    https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
    By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
    http://forums.asp.net/
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SPA514G not listed in available phone type

    Hi All,
    Currently implementing a UC540 with 6 x SPA514G phones.
    I ran through the CCA Telephony Wizard and was able to add one of the phones without issue.
    Since then I have tried addding more 514G's through CCA Users/Extensions
    CCA finds the phones, but when I choose to edit one of them the Phone Type is not listed and is greyed out, so cannot be changed so I cannot add a user to this phone.
    Also to note even though I was able to add a single 514G during the Telephony Wizard it is also listed as 'Unknown' and is greyed out, but it has been successfully configured for that user.
    If i try to add the phone before plugging it in the 514G is not listed in the options.
    I suspect that an upgrade to the 8.6.0 software pack is the first thing to do.
    Unforutnately I don't have access to unit so I'm not sure what pack it is on at the moment.
    Any suggestions?

    The SPA series handsets and ATAs are widely used in hosted call control environments with SIP proxies from a variety of vendors, so the phones were released as soon as they were fully developed and had successfully completed the QA process.  The release schedule for the UC500 did not line up closely enough to this to do a simultaneous release of support across all platforms.
    Cheers,
    Dave.

  • How do I uninstall Adobe CS6 Design Standard from my machine? Program is not listed in "Programs and Features".

    I have Adobe CS6 Design Standard Installed on my machine and I now have a new machine that I need to put this on. I am trying to uninstall it from my old machine because I need to have the "license" available. However, the adobe programs are not listed in my Windows 7 uninstall dialog box.  I assume I uninstalled something on accident (Adobe Application Manager?) that is causing this issue.
    I have the physical disc for the CS6 Design Standard. Please I need some help understanding how to uninstall the programs...I can still use them and they are simply icons on my desktop but not listed in my "Programs and Features" dialog box.
    I appreciate any assistance you may provide.

    Awesome!  Deactivating worked...I knew there was something - I just didn't know where to look.  Thanks so much.  As far as uninstalling the programs, what you said worked perfectly - a little backwords...but its my own fault! 
    Thanks and i'm soooooo happy that this only took 1/100th of the time that it took to transfer my AutoCAD License!

  • OIA - Resource Type is not listed in list

    Hi All,
    Import of resources and resource metadata using files not supported in OIA. Using DML queries I have added Resource Metadata in OIA.
    I can see the Resource Type created in OIA - Administration -> Resource Type ->
    However If I try to schedule a import accounts job my resource type is not listed in the list.
    Did anyone see this issue?

    Hi Pallavi,
    Word of caution: If you are intending to alter the database directy, you should also consider the rbacxservice.sequences table to ensure there's no conflict of PK's when you attempt to create new resources within the GUI.
    INSERT INTO namespaces (NAMESPACEKEY,NAMESPACENAME,NAMESPACESHORTNAME,NAMESPACECOMMENTS,MULTIVALUE_DELIMITER,TYPE_LDAP) VALUES(2000,'TestResource','TestResource','TestResource',',',0);
    update sequences set currentValue = (
    select max(namespacekey)+10 from namespaces)
    where sequencename = 'NamespaceKey'
    Commit;
    Regards,
    Daniel

Maybe you are looking for