Type Layer Error in CS5.5

I've been getting error messages with type layers:
"The type layers in this document were rasterized because something prevented the text engine from being initialized."
"Could not complete your request because of a program error."
Restarting and reinstalling don't seem to help.
I noticed this topic addressed earlier this year, and a temp solution offered was to turn off all fonts in Suitcase 3 and just use system fonts.
Any better solutions for a permanent fix?

You may have a corrupted or duplicated font. FontAgent Pro is excellent at ferreting out problem fonts. There's a fully functional, free 30-day demo version available.
Re-installing without first trashing Photoshop preferences is futile, as you end up right back where you started. To trash preferences, hold down Command+Option+Shift as you launch Photoshop and keep those three keys held down until you see the dialog box allowing you to delete or re-set Photoshop preferences.
Do that now, just in case you have a corrupted preferences file.
Repair Permissions with Apple's Disk Utility before and after every installation, update or upgrade of any application or the OS.
You may also want to clear all your caches with a utility like Cocktail or Onyx.
Wo Tai Lao Le
我太老了

Similar Messages

Type layer error: Could not complete your request because of a program error.

I am trying to rebuild text in a photo. I clicked the type tool, clicked on the background layer (knowing a new one should form) and got this error:
Could not complete your request because of a program error.
Then I made a new blank layer, clicked on it and got the same error.
I quit, relaunched started typing the new layer without a hitch. But when I selected to change the font (to any font), I got the same error
I switched to Firefox to search for the problem and went back to PSCS5. Now I can change the font! After switching applications and clicking on the type layer, I get the error again! Then it's fixed. Then it comes back.
Anyone have this problem or a solution?
I'm using Mac OS 10.5.8 with PSCS5 12.0.1

Most likely you have a corrupt font which is causing problems for some of the type/font code.
Try validating your fonts with FontBook as a first step.

What happened to the type tool in Photoshop CS5?

In previous versions of Photoshop, when the type tool hovered over text I could edit, it switched to just the up and down type cursor tool...and when it was over a region where I could click to create a new text layer, the cursor would show up with a little bounding box around it. Now in CS5, it is showing up as the simple up and down type tool whether I am hovered over text or not....so no way of knowing if a click is going to take me into an editable text layer, or if it is going to create a new type layer..until I actually click..
Has anyone else run into this problem? Any idea the cause, or the solution, or is it just a bug, or something that they changed for some reason?
Thanks!

Hello!
Did you try to reset the text tool? (hit T, then right-click the tool preset icon in the Option bar, and select reset tool)
Usually, to make sure that I can create a new text layer, even if there is already some text, one can hold down the shift key to force the creation of a new text layer.

RMAN media manager layer error

hi everybody ,
i have 9i runs on SLES9 . ın our company we use EMC Networker (Legato) to do our backups. last two day ı got error message ;
channel t1: starting piece 1 at 04-MAR-09
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 03/04/2009 02:14:29
ORA-19502: write error on file "DB_dOBASE_t680578323_u81k91j8j", blockno 6907393 (blocksize=512)
ORA-27030: skgfwrt: sbtwrite2 returned error
ORA-19511: Error received from media manager layer, error text:
asdf_output_section1() failed
xdr=0x0x3fa0100: bp=0x0x3fd3030: send_len=262144: type=12800: fhand=0x0x3fd30b0: wrapper=0x0x3fd30d0: directp=0x0x3fd30f0 (1:4:9)
how can i resolve this error ? why did i take this error ? thanks....
gundem

ORA-27030 skgfwrt: sbtwrite2 returned error
Cause
sbtwrite2 returned an error. This happens while writing a backup file during a backup operation.
Action
This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.

ORA-19511: Error received from media manager layer, error text:

Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
Wahid

Hi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid

Odbc layer error 01004

Using Essbase 7.0.1 I have several load rules calling SQL data I copied from one server to another.
On the new server some rule files work fine but some dont .
I am getting the following error message in the log file.
ODBC Layer Error: 01004 ==> [[microsoft] [ODBC Sql server Driver]String data, right truncation]
ODBC Layer Error: Native Error code [0] Info (1021014)
can anyone help me in solving this issue
and where I have to make necessary changes....
Thanks

I always kind of work backwards on these sorts of issues until I can isolate where the problem is.
1. Is it a view or a table you are trying to load from?
2. Using Query Analyzer or the current SQL Server admin tool, can you query the same table/view that your load rule is trying to load data from?
3. Can you still query it when you login as the same user that the load rule is running as?
4. Is there some sort of "weird" data type in the view/table that might be tripping things up?
5. If you omit that particular column from the load rule, does it start working again?
6. Does it work if you use CAST or something similar in the SQL query or in the construction of the View itself, in order to make it a more "basic" data type?
These are all probably different things I would try to see if I can isolate where the problem is. Good luck --
Jason
[jasons hyperioni blog|http://www.jasonwjones.com]

PDO Layer Error in change version PO

Hi,
We are in SRM7.0 , EC Scenario
In SAP SRM system am experiencing a workflow issue , second level approver is not able to approve/receive the workitem of a changed PO. Moment 1st approver approve it and when requester try to open the PO (changed version) and navigate to Approval tab, the approval flow is missing and showing the error as
PDO Layer Error
An Exception has occured
Every time we must restart the workflow due to which the approval needs to be done again from 1st approver.
We have raised an OSS Message and following is the response from SAP
" The second approver does not get a workitem because the workflow got the status error. The cause of this error is your BADI implementation ZCL_SRMWF_AGENT_PO_BUYER method
/SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_AREA_TO_ITEM_MAP. This method returns an initial table LT_AREA_TO_ITEM_MAP.
Run method CREATE_DECISION_SETS (/SAPSRM/CL_WF_PROCESS_MGR_SBWF) with
parameter IV_PROCESS_GUID = change version guid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx "
When i executed this method CREATE_DECISION_SETS (/SAPSRM/CL_WF_PROCESS_MGR_SBWF) with
parameter IV_PROCESS_GUID = Changed version PO GUID , i got the following error
Exception CX_BO_ABORT triggered
Termination triggered in '' - Rollback required
Can anyone please help !!
Thanks & Regards,
Venkat

Hi Sarvanan,
I am a functional consultant and completely unaware of this technical stuff. Since this is SRM BRF workflows, none of our workflow consultants also are able to help me out on this issue. So, if possible could you please let me your contact number to so that i can contact you directly on this issue.
This is the issue which i am facing from last 7 months and none of the person is able to help me out. So, i kindly request you to please help me out on this issue.
As requested following is the code for the process level class
ZCL_SRMWF_PRC_CONF_BUYER_PO --> GET_BUYER_APPROVERS
METHOD get_buyer_approvers.
DATA : ls_header TYPE bbp_pds_po_header_d,
          lt_item TYPE TABLE OF bbp_pds_po_item_d,
          lw_item TYPE bbp_pds_po_item_d,
          lt_buyer TYPE TABLE OF zgtm_buyer,
          lw_buyer TYPE zgtm_buyer,
          lt_limit TYPE TABLE OF bbp_pds_limit,
          lw_approver_item TYPE zgswf_item_buyer_map,
          lv_requester_mgr    TYPE uname,
          lv_requester        TYPE uname,
          lv_appr_reqd        TYPE c.
CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
    EXPORTING
      i_guid   = iv_doc_guid
    IMPORTING
      e_header = ls_header
    TABLES
      e_item   = lt_item
      e_limit = lt_limit.
DELETE lt_item WHERE del_ind = 'X'.
DELETE lt_limit WHERE del_ind = 'X'.
CHECK lt_item IS NOT INITIAL.
SELECT * FROM zgtm_buyer
           INTO TABLE lt_buyer
           FOR ALL ENTRIES IN lt_item
           WHERE bukrs = ls_header-co_code
           AND matkl = lt_item-category_id.
LOOP AT lt_item INTO lw_item.
*CHECK IF APPROVAL IS REQUIRED
    CALL METHOD approval_level_required
      EXPORTING
        is_header   = ls_header
        is_item     = lw_item
        it_buyer    = lt_buyer
        it_limit    = lt_limit
      RECEIVING
        rv_reqd_ind = lv_appr_reqd.
    CHECK lv_appr_reqd IS NOT INITIAL.
*IF APPROVAL IS REQUIRED FIND THE BUYER
    READ TABLE lt_buyer INTO lw_buyer
                        WITH KEY bukrs = ls_header-co_code
                                 matkl = lw_item-category_id.
    IF sy-subrc = 0.
      lw_approver_item-owner = lw_buyer-bname.
    ELSE.
      CLEAR lw_approver_item-owner.
    ENDIF.
    lw_approver_item-itm_no = lw_item-number_int.
    lw_approver_item-co_code = ls_header-co_code.
    lw_approver_item-matkl = lw_item-category_id.
    lw_approver_item-itm_guid = lw_item-guid.
    APPEND lw_approver_item TO rt_approver_item.
    CLEAR lw_approver_item.
ENDLOOP.
ENDMETHOD.
KINDLY HELP ME OUT AND DO LET ME KNOW IF ANYTHING NEEDED FURTHER FROM MY END.
THANKS IN ADVANCE,
VENKAT

Run time error in CS5

I have a run time error in CS5. Not the trial version !
I desinstalled and reinstalled Photoshop and the error ist still here.
The application did work fine for a couple of days and suddenly the error appeared.
Other applications like Lightroom work fine.
I am running on Windows 7 64 bits. The 32 bit CS5 application has the same run-time error.
What should I do ?
Thanks for help.

Look in Windows 7 event viewer for the runtime hit. The error will be listed there in more detail.
Also you can run the troubleshooting software built in windows 7.
You can also run the windows 7 system file checker in a elevated command prompt. Type in sfc /scannow and let it run. 99.9 percent of the time the command will find the error and fix it.

Type Mismatch error while saving a BPC Report using eTools

Hi,
Iam getting a 'type mismatch' error when trying to save a BPC Excel workbook using eTools>Save Dynamic Template >Company>eExcel. I am saving it as an .xlsx file.
Can anyone please help out and let me know why I am getting this error.
Thanks
Arvind

Hi,
You need to save the file as .xls extension.

Type Mismatch error while calling a Java Function from Visual Basic 6.0...

Hi,
I'm having a problem in calling the Java Applet's Function from Visual Basic. First, I'm getting the handle of the Java Applet and components of it using "Document.Applets(n)" which is a HTML function. I'm calling this function from Visual Basic. My code is something like this...
' // Web1 is IE Browser in my Form.
Dim Ap,Comp
Dim Bol as Boolean
Bol = true
Ap = Web1.Document.Applets(0).getWindow() ' \\ Gets the Parent Window.
Ap.setTitle("My Java Applet") ' \\ Sets the Title of the window.
msgbox Ap.getVisibility() ' \\ This will return a Java boolean ( true or false )
Ap.setVisibility(Bol) ' \\ Function Syntax is : void setVisibility(boolean b)
Here in my code , i'm able to call any function that which accepts Integer or String but not boolean. So, i m facing problem with Ap.setVisibility() function. It gives me a "Type mismatch error" while executing it. Can you please tell me a way to do this from Visual Basic !
I'm using Visual Basic 6.0, Windows 2000 , J2SDK 1.4.2_05.
Please help me Friends.
Thanks and Regards,
Srinivas Annam.

Hi
I am not sure about this solution. try this
Declare a variable as variant and store the boolean value in that variable and then use in ur method.
Post ur reply in this forum.
bye for now
sat

Sims game keeps quiting and giving me a type 3 error message!

Hi,
I have been playing The Sims Original on my Power Macintosh 8600/300 for awhile now and all of a sudden after installing well over 800 new items (Like TVs,couches) it continuesly closes out and gives me a type 3 error message sometimes it freezes the whole computer as well. It simply just closes out as if I clicked it then once its closed it will give me the error message. I have never had this problem before and yes Iam pretty sure it can possibly be the items but theres so many and I dont want to loose them all! I dont even know for sure if thats the problem. My PM 8600 runs Mac OS 9.2.2,and has 160MB of RAM.
Thanks all

Well I just installed it into my iMac yesterday (Without any of the downloads) and it works fine! I guess it was the downloads. Ill have to watch out for them. I dont know why though, Even after I got rid of them all on thePowerMac it didnt stop with the message so I put them back! Then I got a type 2 error. Why? I like it on the iMac but I cant get my saved files over on this mac. Can I share files VIA USB?
Thanks

PDO Layer Error while approving a changed version of PO

Hi,
We are in SRM7.0 , EC Scenario , ECC 6.0
In SAP SRM system am experiencing a workflow issue , second level approver is not able to approve/receive the workitem of a changed PO. Moment we try to open the PO (changed version) and navigate to Approval tab, the approval flow is missing and showing the error as
PDO Layer Error
An Exception has occured
Every time we must restart the workflow due to which the approval needs to be done again from 1st approver.
We have raised an OSS Message and following is the response from SAP
" The second approver does not get an workitem because the workflow got the status error. The cause of this error is your BADI implementation
ZCL_SRMWF_AGENT_PO_BUYER method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_AREA_TO_ITEM_MAP. This method returns an initial table LT_AREA_TO_ITEM_MAP.
Run method CREATE_DECISION_SETS (/SAPSRM/CL_WF_PROCESS_MGR_SBWF) with
parameter IV_PROCESS_GUID = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx "
When i executed this method CREATE_DECISION_SETS (/SAPSRM/CL_WF_PROCESS_MGR_SBWF) with
parameter IV_PROCESS_GUID = Changed version PO GUID , i got the following error
Exception CX_BO_ABORT triggered
Termination triggered in '' - Rollback required
Can anyone please help !!
Thanks & Regards,
Venkat

Hi ,
can you please share your Badi code?
Saravanan

Assign Type conflict error

Hi,
I am trying to load the data from PSA to write optimised DSO in production and it is throwing me an error 'Short dump :Assign Type conflict error".
I have no routines in the transformations.Source data types are matching with target data types.
Is there any way I could resolve this issue.
Thanks,
Chandra

Hi,
I had this problem when i was loading the sales cube. the problem was UOM was not maintained in the system. Then I maintained UOM in the bi and solved the issue. JUst check if your data from the source has got the master data in bi.
Thanks
Srikanth

Getting Type Mismatch Error while passing Array of Interfaces from C#(VSTO) to VBA through IDispatch interface

Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
    public interface IInterface1
        [DispId(0)]
        IInterface2[] GetObj();
        [DispId(1)]
        void SetObj(ref IInterface2[] obj);
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
    public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks

Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
    public interface IInterface1
        [DispId(0)]
        IInterface2[] GetObj();
        [DispId(1)]
        void SetObj(ref IInterface2[] obj);
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
    public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks

How to solve the "type mismatch" error in jCOM early binding program?

I got a "type mismatch" error jCOM early binding program.
I use the VB as the jCOM client to access the EJB deployed on WLS7. While using the
object parameter like "java.lang.Integer" in EJB method call, I got that error message
and my VB client had to be stopped?
The same situation, the VB program work perfect when using the "int" as the parameter.
And I try to instance the "myTLB.JavaLangInteger" in my VB program, but how ? The
"New", "CreateObject" and "GetObject" all failure, I don't know what to do next ???

Hi,
This problem Could happen when you referesh quality or test system.
Your delta setup for the related master and transaction data needs to be reinit.
What happens is when you init. the delta and subsequent delta is all maintained in your source system
please check Notes 852443,424848,834229
Hope this helps
Thanks
Teja
Message was edited by:
Teja badugu

Type Layer Error in CS5.5

Similar Messages

Maybe you are looking for