Type of cert needed for anyconnect ikeV2

Hi Everyone,
I have created CSR for anyconnect IkeV2.
When i ask the cert vendor what should i ask them that which type of cert i needed for IkeV2?
We do not want users to use ssl like https://xyz.com and connect and download the client.
We want users machine pre installed with anyconnect and profile and connect using IkeV2.
Regards
Mahesh

Hi Marvin,
I got cert from Entrust.
it has 3 options server cert,root cert and chain cert.
i installed the server cert on the ASA and now status of cert has changed from pending.
When i connect to anyconnect ikev2 it still gives me cert warning line non trusted cert.Do i need to do any config change in anyconnect ikev2?
Regards
Mahesh

Similar Messages

Force client cert only for anyconnect and not for ssl-clientless?

I need to configure different authentication for anyconnect clients and clients logging in using the ssl portal in the browser.
I want both AAA and certificate for anyconnect but i want ONLY aaa for the ssl portal (clientless)
I tried using two tunnel groups with different authentication settings but i need the same alias available for both clientless and anyconnect and when i tried that it said i cant have two with the same alias.

Did you ever get an answer to this question?
It seems you should be able to set up a two different client profiles. Under Authentication, ssl-client would would specify "Both" and the sslclientless would specify AAA. You would likely have to duplicate much of the other work but the requirement would be satisfied.

How many cert need for Lync 2013

How many cert I need to buy???
[internet] <--> [TMG] <--> [Lync edge]
[Lync front end]
is it correct to buy this two cert. (then what's the function for)
Cert 1 for TMG
Lyncrproxy.abc.com (for
Reverse Proxy???)
Meet.abc.com (for web conference)
Dailin.abc.com (for phone??)
Lyncweb.abc.com (for ???)
Lyncdiscover.abc.com (for Mobility client setup)
Cert 2 for Lync edge
Sip.abc.com (for SIP Access)
Lyncwebconf.abc.com (for Web Conferencing Edge service)
Lyncav.abc.com (for A/V service)
Thanks

You can use one cert across the Edge and Reverse Proxy as follows:-
sip.abc.com - Lync Access (use as subject name and assign to Edeg Access) (Edge)
Lyncweb.abc.com - For distribution Group and addressbook service (TMG)
dialin.abc.com - webconferencing dialin URL (TMG)
meet.abc.com - Web conferencing meet URL (TMG)
Lyncwebconf.abc.com - Web Conferencing mnedia (Edge)
lyncdiscover.abc.com - mobility (Edge)
The simplest way of requesting this cert is from the Lync Deployment Wizard on the Lync Edge Server. Be sure to marek the request as exportable so the cert can be exported from Edge and imported to TMG.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog

Types of certs required for OAM infrastructure

We are building out an OAM 10.1.4.3 system and are going to use cert mode. My question is will these need to be server certs, or can we use client certificates on the machine, also will we require separate certificates for each component, including webgates?
Thanks,
Andy

are you using MS CA? if yes then with standard CA use the default template type I think it is named as "Administrator" or "end user" can not remember. If its an enterprise CA then you should have a "web server" type template available, you can use this if you want but as I said the extended key useage bit (EKU) for server authentication and/or client authentication is not required.
Just ensure to get a reply in base 64.
Thanks,

What type of connectors needed for optical audio out?

Hi, looking at upgrading to an imac and I noticed on the spec it has optical audio out which would be great to go into my audio interface. What connector do I need? Is it TOSLINK type?
Had a look at the picture of the rear but couldn't see an optical out port, only the jacks for analogue. Where does the optical come out!?
Thanks!

If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
I use one myself, they work fine.

Type of listener needed for buttons ? please help

hi
does anyone know what type of event or listener one should
include for buttons in a web page which has been downloaded
into a JEditorPane. i have been able to get a web page
onto my JEditorPane and can even follow most of the hyper links
by implemmeting hyperlinklistenter.
but i am not able to do the same for butttons
ie for eg in google web site i am not able to get anythinh
by clicking on button .

This is not easily dooable, You're talking about form submit buttons, which the Default HTMLEditorKit does not support. Even worse, the LinkController class is not overridable, which is a bad design on sun's part.
You'd have to create your own EditorKit, me thinks, and use that for text/html.
Not an easy job, but you could cheat off the HTMLEditorKit source.

What file type do I need for imovie?

I know the answer may seem obvious, but I'm getting a bit confused! I thought I needed something like .DV for imovie and the short clips I uploaded from my camera which are saved as .MOV wouldn't work. However some do and some don't? What may be the reason for this?
Is Quicktime Pro a more or less essential buy for converting files like these?
Edited to add: I just saw there are quite a few questions like mine, however reading the answers I'm still not sure what I need to do. I'm not so intuned with all the jargon!
Message was edited by: emixconnor

I thought I needed something like .DV for imovie and the short clips I uploaded from my camera which are saved as .MOV wouldn't work.
DV is a compression format specifically designed for editing and will work in any version of iMovie or any other Apple editor for that matter. MOV is just a file container. Whether or not an MOV file will import to iMovie '08 depends on what audio and video compression formats the file contains. IMovie looks for DV, AIC, M-JPEG, Photo-JPEG, MPEG-4, and H.264 files for file import or DV, HDV, AVCHD, or MPEG2/AC3 for camcorder import.
However some do and some don't? What may be the reason for this?
As explained above, if you check the audio and video compression formats, you will note that the same formats keep falling into the "will" and "won't" import groups.
Is Quicktime Pro a more or less essential buy for converting files like these?
Not essential, but I would always recommend it -- especially if you plan to layer, mask, and/or scale video tracks. MPEG Streamclip essentially accesses the same QT components for conversions and is free. In addition, it can handle multiplexed compression formats and retain the audio. It just can't handle those areas mentioned above. As far as I am concerned, both are indispensable as I use then on almost a daily basis quick, little edits.

What type of HBA needed for 220 R to connect to 3100 JBOD

Hi
We have a number of 3100 JBODs that are not currently being used and I am planning to use them to connect to the 220R server. What type of HBA we would need to make that happen.
Thanks
Srini

Sorry, you won't be able to connect an Sun Storage Array 200 to an Intel server. The array uses a Sun sbus HBA. It is commonly known as a SOC adaptor and is only available in sbus, so the array can only be connected to Sun sbus systems, not pci systems.
hth,
john

What type of connector needed for Russia and iPod?

I'm traveling to Russia and will need to recharge iPod once I get there. What kind of adapter/connector will I need? I have the 80GB.

If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
I use one myself, they work fine.

What type of hard drive enclosure do I need for my old hard drive?

What type of hard drive enclosure do I need for the hard drive from my old macbook pro? The graphics card doesn't work on the old laptop and there were some files that were not on my last backup that I transferred to the new macbook pro.

Check eBay. Any 2.5" USB SATA HDD enclosure.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

What is the type of cable do i need for a macbook white to connect to a hdmi cable?

what is the type of cable do i need for a macbook white to connect to a hdmi cable? This is quite a problem since macbook white is not in production anymore.

First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

Currency type option needed for copa report

Dear Experts,
Currency type option needed for copa report.I have checked all the possibilities in ke35 as well.
how to add curreny type in selection screen for COPA reports.
regards
RK

If you want to create your own report with required currency,
T CODE - KE35 - Click on "Report" (create), next window appears
Give the name of the report and description
The u see 2 options
1. Basic report
2. Report with Form
Select which ever you want and press ENTER
Here you need to prepare the report format and fields which are there in the right side box
Hope it helps
Thanks

What type of mac do i need for home use to watch and edit videos

What type / power of MAC do i need for home use to watch and edit vedeos as well as basic computer work?

Any of the new Macs for home - iMac or MacBook Pro are even fine. You don't need a 65lb workstation tower. If you want a tower for how well and long they hold up, and can be upgraded, that is another matter and fine and might be overkill at first.
Even the base Mac Pro will get you there.

What type of flash player do I need for an iPad 4?

What type of flash player do I need for an IPad 4.

IOS device do not support Flash
However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability

I understand there is no virus protection needed for the lst iPad, but what type of security is there when going on the internet?

I understand there is no virus protection needed for the lst ipad, but what type of security is needed when on the internet?

Just put your faith in Apple.

Type of cert needed for anyconnect ikeV2

Similar Messages

Maybe you are looking for