Type of link between  SRM and MM-SRV

Hello experts,
I would like to know how link SRM and MM-SRV?
You could mail me at : [email protected]
Best regards.
Mimoune RABHI

please refer to the note
Note 868192 - Consulting solution: SUS-MM (SUS-MMSRV) service procurement.
and also the following notes would be of use to you
1028264
982871

Similar Messages

  • Link between SRM and ECC invoice

    Dear gurus,
    I need to find the link between SRM and ECC invoice number, can you please provide me the related tables?
    Thank you in advance for your collaboration.
    Regards,
    Fuffo

    i don't have access to the system now but i guess will be table BBP_PDBEI.
    or you can go tcode BBP_PD, check in item level.
    cheers.

  • Link between code and code groups and inspection type

    Hi All,
    I want to know the link between code and Code Group for UD and inspection type?
    There is an option of choosing Usage selected set in SPRO "Seeting for inspection type".If i dont enter anything there,will it show all the code groups in the system while taking UD?
    Pls guide

    Hi Shreya,
    Yes, the link between code and Code Group for UD and inspection type is specific selection of UD related to specific inspection type.  Ex. there are separate UD codes individually for Goods receipt against PO, Gr against Production or for In-process inspection ets. so If you assign the selected sets at SPRO Inspection type, then while doing UD system will show UD codes related to only that inspection type.
    If you don't enter anything there at SPRO, you will see all the code groups in the system while taking UD and one can get confused in selecting the relevant code.
    so assigning of UD selected sets, plant wise (tick) at " Inspection types" is best practice.
    Best Regards,
    Shekhar

  • Link between sd and pp

    hi all,
      i have a problem regarding relation or link between sales and production order. i have to fetch production order number related to sales order number. i have checked in the table AFPO that is production order item table , there is field AFPO-KDAUF and AFPO-KDPOS ie, sales order and sales item. but when i see these two fields there is no data into the field so how can i get data into the table related to production order.can anyone help me on this issue.

    Please refer to the below links -
    https://forums.sdn.sap.com/post!reply.jspa?threadID=309885
    Integration points with MM/IM and PP are some of the following -
    When a Production order is created and released a reservation gets created for the materials in BOM
    When the reservation is created and materials are posted against the reservation with mvt type 311 these are transferred to the respective location.
    When a GR is posted with mvt type 101, the Finished or Semifinished goods are posted to the respective storage location and inventorized.
    When a consumption is posted with mvt type 261 then stock will get reduced in resepective storage location.
    When a batch determination is done in a production order basing on the batch search strategy and sort rule material, quantity and batch are selected.
    If WM is configured an associated internal movement for all the above movement types will be posted.
    During MRP, BOM which is a master data for PP is used to calculate the dependent requirements of materials.
    During availabilty check of a production order basing on the availability check configured materials will be selected and checked.
    Hope the above may help you.

  • 'Is there a link between OLM and iProcurement'

    I have been asked 'Is there a link between OLM and iProcurement'? The person posing the question is wanting to create trainers as suppliers and I know that the supplier information is shared between OLM and the A/P, A/R and G/L modules and I presume that the link to iProcurement will be via one of these modules however is there a more direct vanilla link between OLM and iprocurement?
    Any help would be great
    Thanks
    DM

    I am afraid there is no link between the iProc and OLM.
    The closest that apps can offer you is that your learner/delegates can be of type external i.e. being an Organization or a Customer. Hence there exists a link for your delegate to be a customer(hz_parties).
    However this might be a future integration i.e. Trainers being suppliers. I am saying so because in 11.5.10 there is a table named OTA_VENDOR_SUPPLIES that has reference to vendor_id. Currently this table is not being used by OLM.
    You may look into the code of packages OTA_VSP_API, OTA_TEA_BUS & OTA_PLE_BUS and see if Oracle's future functionality will converge towards your business requirement.
    Thanks,
    Anil Passi
    http://oracle.anilpassi.com

  • Is there any Link between BNK_MONI and DMEE

    Hi ,
    I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI .
    I am running following sequence of T Codes :
    RVND --> F8REL --> F111 --> BNK_APP --> BNK_MONI ..
    I want to update one of the fields in output file generated by BNK_MONI .
    Is there any link between BNK_MODI and DMEE ?
    Or shall  I have to Debug background job created by F111 like it is done in case of F110 ?
    Please suggest..
    Edited by: Yogesh Gupte on Jan 27, 2012 6:59 PM

    Hi,
    Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
    In Addition to above information,
    In VOV4,
    DL+ NORM +   +    -DLN
    In VOV5,
    For Itemcatagory DLN+        --CN
    From this schedule line category CN,movement type 601 is taken during without reference to order –delivery creation.
    MCM

  • Link between IT0014 and IT0015

    Hi,
       i created one wage type in IT0015 with amount 5000$, So that 5000$ payment made to associate. Now the same i want to recovery as 500$ in 10 installments through IT0014. Can u pls help me how will create the link between IT0014 and IT0015 for the advance wage type?
    Please give me the detailed information,so that i can configure in my system own.

    Hi,
    Please follow the below steps:
    1. Copy the WT (XXX1) from MD70 as a Balance WT
    2. Copy the WT (XXX2) from MD80 as a Recovery WT
    3. Copy the WT (XXX3) from MD90 as a Total WT
    4. Maintain the link in the table V_T51P1:
      indicator 10: Recovery WT to Balance WT
      Indicator 11: Balance WT to Total WT
    After you Paid the Advance Just decide the installments star date and amount and then maintain
    1. WT XXX2 in IT0014 with same start date (End date can be 31.12.9999) (Installment amount needs to be maintained)
    2.WT XXX1 in IT0015 with same start date (One time entry only) (the Advance amount needs to be maintained)
    3. WT XXX3 no need to maintain in any info type AND just you run the payroll ,system will deduct all installments until the total advance will deduct.
    Please let me know if you have .........
    Thanks
    Cheera

  • Link between customer and condition records

    Hi All,
    I am developing a pricing report which display prices and condition types with customer numbers where can we can find out the the link between customer and condition record?
    Thanks&Regars
    Mahesh

    hi,
    customer tables start with K such as KNA1, KONV.
    Conditions are stored in several tables:
    KONH, KONP are most important general tables;
    so check the link between those tables like

  • Link between 0RECORDMODE AND  ROCANCEL

    Hi, could you pls explaint the link between 0RECORDMODE and ROCANCEL
    I just dont understand why they are mapped in transferrules. and i dont have the field ROCANCEL field in my datasource. actually what scenario makes 0RECORDMODE and ROCANCEL go together could u pls explain
    Thanks in Advance,
    Pallavi.

    Hi,
    First: the recrodmode controls how data is posted into cubes or ODS (DSO) Objects.
    Different Chars have different meanings:
    N for new records
    B for Pre Imgages
    ' ' for after images
    R for Reverse Images
    X for Storno
    D for Deletion of a Key (only in ODS possible)
    What extractor delivers what different types pof values can be seen via to tables:
    ROOSOURCE in the source R/3 System.
    There point out th edelta mechanism. With this value, check within Table RODELTAM. There you see the different POSSIBLE Values for ROCANCEL delivered by a DataSource.
    The relevant objekt for the controlling of the mode in BW is the InfoObject 0RECORDMODE. Each ODS (DSO) has this Object. For Logistic-Extractors (except MaterialManagement) 0RECORDMODE should be mapped with ROCANCEL.
    0STORNO generally is an InfoObject for Reports. E.G. Material movements. Stornos are posted in R/3 with particular so called movement types. Each movement typer contains an information if it is of type "Storno". If this is so, the field storno contains an X.
    If you now map the storno field onto 0RECORDMODE, the record is interpreted as a storno record an will be wied blank ini the DataTarget.
    If you have monotone increasing document numbers (like in CO-PA, CO-OM, MM-INV ...) 0RECORDMODE should be left blank. 0STORNO can be used for Reporting then and be filled differently.
    If you can have changes to an already existing document number (like in sales orders or purchase orders) i'd strongly recommend to map 0RECORDMODE onto the delivered ROCALNCEL field.
    also Check
    Refer OSS Note 399739 and 333492
    Thanks..Assign points if helpful.
    ´Tony

  • Link between VBRP and KONV

    hello,
        any idea for the link between VBRP and KONV tables ?
    I am fetching vbeln from vbak and based on that i am getting matnr and quantity details from vbrp now i want to get condition type and tax code details from konv.how to link it?
    regards
    Soniya.

    KONV (condition table) is linked to VBRK (Billing: Header data) by the following
    VBRK-KNUMV = KONV-KNUMV
    and VBRK (Billing: Header data) is linked to VBRP (Billing: Item data) by the following
    VBRK-VBELN = VBRP-VBELN
    I believe you can can fetch data from VBRP using for all entries.
    Then fetch the data from KNOV table using the above given link and then modify the required internal table to retrieve the required result.
    Hope it helps

  • Link between KONA and VBRK/VBRP and KONP and VBRK/VBRP

    Hi
    please suggest me the link between KONA and VBRK/VBRP and
    KONP and VBRK/VBRP
    I want to give link of rebate agreement and invoice no/Inv Qty
    My requirement is I want a report where i can see Under one Rebate agreement ,how many Commercial Invoice use
    e.g. Rebate Agreement no -125 ( for 10 Rs / unit)
    I have created 10 Invoice for 10 qty each so accrual Amount is 10* 10= 100
    I want such report where for agreement No 125- 10 Invoice No should be reflected.
    I don't want to go into VBO2 and go to verification level that concept i know
    i want one report where i will see all
    Regards
    Hemant

    Hi
    In my case i want commercial invoice no (billing type F2) but if i try to find link between KONA and VBRK for field KNUMA i can only see credit Memo No(Billing type-B3-rebate billing type) ,
    I want to display commericial invoice and not rebate credit memo
    Pls advice
    Regards
    Hemant Gaikwad

  • Establishing Link between Order and Routing

    Hi
    When I am creating an order (e.g. production order from CO01) by default itu2019s getting Routing and BOM. I want to know from where my order is populating BOM and Routing?
    I want to know how the link between Order and BOM and Order and Routing are established
    Thanks

    If you want to see how the tables are linked you can see this in table CAUFV (order header).  Fields PLNTY, PLNNR, & PLNAL define the task list type, group, and group counter.  These can be used to look up the routing information in tables PLKO and PLPO.  The BOM link is in field STLTY, STLST, & STLNR (bom category, status, and BOM).  Use these values to find the the BOM details in tables STKO and STPO.
    If you want to know how the system knows which BOM and routing to bring in, that is done in configuration under Order plant dependent parameters (t-code OPL8).  Also, once the boms and routings are copied into the order you can make changes to the operations and components within the order.  The operation and component details that are stored in the order can be found in tables AFVC and RESB.
    thanks,

  • Linking between LQUA and RMCLM

    Hi all,
    Can anyone please tell me the linking between LQUA and RMCLM?
    Thanks and regards,
    Ridhima.

    Hi Chintamani,
    Actually I need CLASS TYPE (Batch Classification assigned e.g. BATCH and FIN_GOODS_BATCH, MSD_VENDOR_BATCH, VENDOR_BATCH) for a particular Material and Batch number.
    Thanks,
    Ridhima.

  • Deactivate the link between qualification and appraisal

    Hi expert,
    i have a question for the qualification(infotype 0024) and appraisal (infotype 0025) in PA here.
    After I maintained qualification for infotype 0024, i found that, when i go into appraisal(0025), the screen automaticlly switched to qualification(0024).
    As i known, i have already done the configurations for the appraisal, but all the appraisal criterira didn't show in info type 0025.
    Anyone knows how to deactivate the link between qualification and appraisal?
    please advice.
    Thanks,
    Liang

    Hi Liang,
    Goto SM31 -> T77S0.
    PLOGI APPRA - make it 0.
    PLOGI QUALI - make it space or 0 A032 Q.
    Try it.
    Regards,
    Dilek

  • Where is link between 0007 and 0008 infotype

    Dear Members,
    Where is link between 0007 and 0008 infotype.How the system automatically populating WORK HOURS/PERIOD AND CAPACITY UTIL .LEVEL.where is integration .
    Regards
    Nandhini

    Hi,
    >For your first question: Working Hours/Period field in IT 0008 is determined by the Planned Working Time infotype  (0007).
    >The Weekly / Monthly Working Hours  field in IT 0007 are system determined the specified value from the work schedule rule. Capacity utilization level is related to Infotype 0008. The relationship is that an employees basic salary and its related components are stored here and are paid based on the working hours of the employee which is obtained from Infotype 0007 and multiplied by the capacity utilzation which under normal circumstances is 100 %. If the employee belonging to the same pay scale group and level works part time say half of the normal time, you can maintain his capacity utilisation as 50% instead of maintaining seperate values in the wage types.
    Regards
    Chandrashekar

Maybe you are looking for