Type of parts in kit

how can one identify what is the type of part in a kit
is it dry  or liquid ???

Hi,
Sorry,Kit consist of combination of material clubbed in as a kit. If Sales BOM is maintained, then based on material master, it can be identified as liquid or dry, assuming the material master is understood by concerned person.
Regards,
Padmam.

Similar Messages

  • After Preflighting a PDF, using Convert to CMYK, Flatten Transparency and Prepress Profile Convert to CMYK only the resultant PDF has a grubby halo along the edge of some white type sitting on an image. The type is part of the image.

    I am using a 27" iMac 3.2 GHz Intel Core 5, 8 GB Memory, running Yosemite 10.10.1. 
    The version of Acrobat that I am using is: Acrobat XI Version 11.0.10
    After Preflighting a PDF, using Convert to CMYK, Flatten Transparency (high resolution) and Prepress Profile "Convert to CMYK only" the resultant PDF has a grubby halo along the edge of some white type sitting on an image. The type is part of the image which is 300 dpi.
    It is like the image isn't really 300 dpi but has been artificially boosted to that to avoid being tagged by Preflighting, but when Preflighting the file it knows the original resolution.
    I have screen grabs which illustrate the problem perfectly but do not know how to post them, if indeed they can be.
    Any help or comments gratefully received.

    Without the files and possibly screen prints, it is virtually impossible to assist you.
              - Dov

  • How to get Document type , number , part and version from mm01

    Hi ,
    Can you help me out so that i can able to get the document type , number , part ,version from mm01. Iam using exit EXIT_SAPLMGMU_001 but i was not able to get those details inside the parameters . I not able to get any values inside wmara parameter. ?
    Regards,
    Sivaganesh

    Hello Siva,
    Try with the below 2 BADI's
    BADI_MM_MATNR
    BADI_MATERIAL_CHECK
    Regards,
    TP

  • Cant delete orphaned content type, it says : "The content type is part of an application feature."

    I created site from existing site template that previous vendor working with company created. I could figure that they saved site as template and when you do that sharepoint creates sandboxed solution. When I create site based on that template, it adds orphaned
    content type and when I try to delete it, it gives error : "The content type is part of an application feature.".
    I looked on internet but solutions dont seem to fit in my scenario.
    Following are possible solutions I read on net.
    1) Deactivate feature that has content type and all dependencies for content type and then delete content type --- In my case there is no feature in feature galary that you can deactivate as it is part of site template.
    2)Get the WSP and edit in visual studio, I am working on client machine and I do not have access to sharepoint server. When I try to create new visual studio project with "Import sharepoint solution package", it says Sharepoint server is not installed
    on this computer. I tried to get Microsoft.Sharepoint dll from Microsoft virtual lab but I can only work on web client and windows client doesnt work. Web client is not letting me copy files into my local desktop.
    Any suggestions ? I just need to take that content type out and generate WSP and upload it back
    Dhaval Raval

    Below is how I recreated problem , my findings and solution to this problem (Everything is done through Sharepoint UI)
    Problem :
    Create site and create custom content type using sharepoint UI.
    Save site as template.
    Use above template to create new site.
    New site contains orphaned content type, when you try to delete that unnecessary content type sharepoint gives error: The content type is part of an application feature. Sharepoint will not let you delete this content type.
    Delete original site from which template was created.
    Findings:
    When you save site as template, sharepoint creates and activates Sandboxed solution in solution gallery of Root Site.
    Sandbox solution has same name that you gave when saving site as template.
    Activation of Sandboxed solution adds feature having name of original site from which template was created, and this is Site Collection Feature. I could not find any site feature for it and also I could not find any site feature for custom content type
    as well. I think when you create content type through Sharepoint UI, it doesnt create site feature for that.
    Deactivating site collection feature for that site template doesn't let you delete that orphaned content type from newly created site.
    Solution:
    If you deactivate Sandboxed solution from Solutions gallery, it will remove corresponding site collection feature as well as that orphaned content type from site. Reactivating that solution doesn't add orphaned content type back to newly created site.
    Above process only deletes orphaned content type from newly created existing site but you will have same problem when you create more new sites from that site template.
    I would say once your problem is fixed with deleting content type, solution is to replace site template. In this way newly created sites wont have same problem again.
    Dhaval Raval

  • Excise Trasaction types for Part II

    Dear All,
    which trasaction types are considered in RG23A - part II register.
    Regards,
    Vimlesh

    thanks this is useful information to me, but can you reply me from below total list of transactions which one are relavant to RG23A-part II entries.
    57CM      57F CHALLAN COMPLETION
    57FC      57F CHALLAN CAPTURE/CHANGE
    57NR      57F NON RECEIPT
    ARE1      EXPORT PROCESSING UNDER ARE1
    ARE3      DEEMED EXPORTS UNDER ARE3
    CAGI      CAPITAL GOODS ISSUES
    CAPE      CAPITAL GOODS
    CEIV      CANCELLATION OF EXCISE INVOICE
    DIEX      DIFFERENTIAL EXCISE THROUGH JV
    DLFC      GOODS REMOVAL THROUGH SALES
    EWPO      EXCISE INVOICE WITHOUT PO
    GRPO      EXCISE INVOICE FOR GOODS RECEIPT/PO
    MRDY      REVERSAL WITHOUT REFERENCE
    MRRD      REVERSAL INCASE OF COMSUMPTION OTHER THAN PRODUCTI
    MRWO      CENVAT REVERSALS FOR WRITE OFF
    OTHR      EXCISE INVOICE FOR OTHER MOVEMENTS
    TR6C      PLA ACCOUNT ADJUSTMENT THROUGH
    UTLZ      FORTNIGHTLY PAYMENTS
    Regards,
    Vimlesh

  • Unable to delete same site-level content type - The content type is part of an application feature.

    I have a content type called "XYZ" at a subsite level that I'm trying to delete. I have disassociated all lists (there is only 1 list using content types, which is using a different parent level one now) from this content type but I'm still getting
    this error:
    The content type "XYZ" is part of an application feature.

    Hi,
    Please try to change "IsFromFeature" flag in content database for the particular content type from "1" to "0".
    More information is here:
    http://pranavnk.blogspot.com/2013/10/deleting-orphaned-content-type.html
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Exise Transaction type and Document Type for part 2 record created by J2iun

    Hi All ,
    We utilized available credit of SERVICE TAX (HCESS and ECESS) and CENVAT  (of both RG23A and RG23C) credit against payable SERVICE TAX ( ECESS and HCESS).
    At the time of save , system has generated accounting document.I have checked generated accounting document which is perfect.Here the document type selected by the system is ED.
    But when I check corresponding part2 entry (in table J_1IPART2) there system has not updated any value in fields Exise Transaction Type (TT) and document Type while internal document and Financial Year are updated with 0 value.
    I am not sure if system behaves in the same way for J2IUN generated PART-2 entry.
    I need your help to understand it.
    Regards
    Shrey

    Hi,
    There is not any transaction type for Excise Utilization and determining the accounts of the fortnightly utilization.
    The credit account of the transaction type u2018DLFCu2018 is used as the debit account here. For the credit side we pick the debit accounts from the GRPO, EWPO and TR6C transactions.
    This is the reason system only generates a Part II Serial No and updates in table.

  • Shoul order type be part of release strategy or WF logic?

    Hi,
    In our release strategy for purchase order we have set up anything that is > £500 needs approving. This kicks of the standard PO wf, but the workflow should also only start if the order type = NB or 8000.
    Can anyone tell me if the order type should be part of the release strategy or the workflow logic?
    Thanks
    Forhad

    Hi,
    See its purely based on the requirement, if you maintain at the release strategy level then the release strategy itself will not be available for those kind of PO's.
    so its better to restrict this at Wf level thru start conditions.

  • Process Multiple Files Adding File Type as Part of Name

    I'm using the "process multiple files" command to converts folders of tiff files to jpeg.
    I routinely hide extension names of my files.
    All my files are being converted with the ".tiff" extension added as part of the name, and I can find no way to prevent the process from adding this suffix.
    So, for example, a tiff file I see as "Name" gets converted to jpeg as "Name.tiff"
    So, if I then display the extension/file type on the new file, what I see is "Name.tiff.jpg"
    Is there any way to prevent the process from adding ".tiff" to the end of each filename? I have a few thousand of these to do, and am not looking forward to manually deleting that suffix off each file.

    Batch Rename:
    You can rename original/input files or you can copy/move original files to output directory and rename the files in the output directory. For renaming, you can generate a name pattern for new names and the starting index for numbers.
    Please be very carefully when you use rename and first test your options with dummy files; batch rename can be very powerful = dangerous! Using bad name pattern, combined with options like Move/Rename original/input files and/or Overwrite existing files, you can, under special circumstances, remove all input/original files! Please do not use these options, until you REALLY know what you are doing.
    Hint:
    If you want e.g. 3 digits in the new rename name, you must also write 3x "#" in the pattern!
    Example:
    Pattern image_### with start index 1 will produce file names "image_001", "image_002", etc.
    Click on Set rename options to open a dialog for further options for the renaming process.
    Check those you want to use, then click OK. To exit without making any selections, click Cancel.
    Batch Conversion + Rename:
    This option combines the normal Batch Conversion with Batch Rename. You can set the name pattern for the output files
    The above is from the help file of Irfanview, a free program, which you can obtain here:
    www.irfanview.com
    This will rename in a pattern, but I don't know if this is suitable for your purpose.

  • Set up std. price for proc.type F parts (External Procurement)

    Experts,
    what is the comon way to set up Std. price for materials with Proc.Type F (External procurement). Current I am using KKPAN and set cost out of PIR and material burden as seperate line.
    Looking for a way to have the material burden as fixed value in the system which I can use as base for calculation.
    Thanks in advance
    Jörg

    Dear ,
    For any FG material you should have Standard Price (S)  in Cost2 view  getting updated thrugh CK24 after ck11n done during production process .
    For any Externally procured item , you should have MAP or Planned price with Valdidty .Generally duing planned cost estimaiton , planned price will be considered  while you will do good issue agianst production order , systm will consider  the MAP to calcualte the cost of the material .
    Now to update the price you should carry out MR21 with new price for company code , validdity date , price control indicator  and valution variant .
    Generally in project scinario , you can use MAP for FG material .
    refer :
    http://help.sap.com/saphelp_47x200/helpdata/en/47/60ff6249f011d1894c0000e829fbbd/content.htm
    http://www.sap-img.com/materials/price-control-v-or-s-in-material-type.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/47/60ff0749f011d1894c0000e829fbbd/content.htm
    Regards
    JH

  • IOS5.0.1 Bluetooth does not work existing equipment you need to check which type of headset/handsfree kit work

    I have just upgrade to the 4S and at the same time it has has IOS5.0.1 upgrade before using the phone. I find that teh latest version of blue tooth does not with handsfree/headsets I have. I now have to find out if it will work. Apples view is they have to be compatible with their version, For people who just use teh phone etc are going to be caught out and teh Mobile provide I use this is a new problem fro them

    I found the solution, the problem was the encoding of the configuration files.
    I put:
    => Encoding: UTF8 without signature
    => line endings: UNIX(LF)
    And now it works :)

  • How do I modify custom step type that is part of a sequence?

    I have an example sequence that has a custom step type called "LabView Reentrant Action". My interest is to modify this step type to my needs. Because this custom step type is part of the sequence there is no definition in global type palette. I was told that I could copy this step into global type palette. But, I don't think I could.
    I can copy the step from the sequence space but I do not have an option to paste it in the palette.
    In sequence space I have options to choose LabView Reentrant Dialog Steps under Insert Step pull-down menu. When I open Step Type Menu Editor in the palette space, all types are listed except LabView Reentrant Dialog Steps. I think these are not showing in the palette because they are custom types built into the sequence.
    How can I extract the custom step type into global palette so that I could modify to my needs?

    Hello,
    If you already have the customer step type "LabView Reentrant Action" then to modify it all you need is to go in "Type Palette" (Ctrl-T) and make modifications in the step type.
    In case you are not able to see the step type in type palette then you need to add the step type in a custom ini file. You can add that ini file by clicking on customize in "Palettes" drop down menu. The you can copy paste a step in the step type and make modifications to the step.
    I would recommend going through Tutorial: How Do I Make a Custom Step Type? for more reference.
    I hope it helps..
    Rajiv

  • Help, findind a part piece number and seller

    Hi I have a HP LaserJet Enterprise 500 M525f MFP, I have an aditional tray, but a few days we moved from a place to another the whole printer and the "port" where the extra tray connects got broken while trying to plug it back. I don't know whats the name of that port, and where can I purchase a replacement for it. 
    That is the "port" which got broken, is located behind the printer, and there is where the addional tray is connected.
    Thanks in advance.

    Good afternoon.
    Welcome to the community.
    I looked through the HMM also, to see if there was any notation for the part you describe and found none either. In my previous experience, those types of parts may be included in a package called System Miscellaneous Parts Kit. Looking at the X230 FRU Parts List, page 3 shows such an item (FRU P/N 04W1418), but I have no way of knowing what's included in it.
    Checking the FRU P/N on the Maintenance Parts Site, shows the kit is available for $19.50 + shipping, if you feel like taking a chance on it. Hopefully, another member will weigh in with additional details.
    Hope this helps a bit.
    Edit: typo.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Data Acquisition Step Type

    Hi, is there a step type to perform Data Acquisition and Basic comm control such as RS232 and GPIB within teststand ?
    This question was raised when I was training one of our Technicians today, he asked/suggested that having a step type which performs Data Acquisition and comm control would reduce there development time down dramatically, They have just started to use Teststand on small cycle test rigs as part of an evaluation stage. They have no experience with LabVIEW or CVI, they basically want a quick  and easy way to produce a test sequence with Data Acquisition and comm control.
    if there is anything like this at the moment can you possibly reply. If there is not,  is this a something which will be avaible in the future ?
    Message Edited by ds1638 on 12-09-2008 02:44 PM

    Data Acquisition usually refers to a DAQ board from NI so I think what you are looking for is a generic NI-VISA step type and a specific RS-232 step type. I have a NI-VISA step type that was originally written with LabVIEW 6.1 and for use with TestStand 2. I've atached that below. I don't have the .ini file handy and don't have time to recreate it but from the code, you should be able to see what needs to be added to the step properties. The basic step is a modified Pass/Fail Step.
    It's not that difficult to create your own custom steps. I've done a lot and it only takes a little while longer than doing a code module in LabVIEW or CVI. The extra time is in creating the edit step.
    I've got an RS-232 step type but part of it is product specific so it is proprietary and I can't post that. Look at the VISA example and the other examples of custom step types that are on the developer zone and see how far you get.
    Attachments:
    VISA IO.zip ‏188 KB

  • Getting 415 Unsupported Media Type error when calling a windows web service

    I have a BPEL process that invokes a windows web service. This process is working currently on the production system. When trying to run the process in a new test clustered environment, I'm getting the error below (bolded).
    We're using 10.1.3.3 Oracle Application Server and BPEL. Please advise on what config files might need to be tweaked to fix this.
    InvokeWindowsLoggingWebService(faulted)
    [2010/04/16 17:26:35] Faulted while invoking operation "WriteLog" on provider "WindowsLoggingWebService". less
    -<messages>
    -<input>
    -<InvokeWindowsLoggingWebService_InputVariable>
    -<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters">
    -<WriteLog xmlns="http://tempuri.org/">
    <FileAbsolutePath>
    R:\CV & RM\upload_from_test.log
    </FileAbsolutePath>
    <Content>
    ||*************************************************************************************|Append to log file 2010-04-16T16:57:08-04:00|*************************************************************************************||START DATE: 2010-04-16T16:57:08-04:00|END DATE: 2010-04-16T17:25:58-04:00|COUNT: 106|TRANSFER OF FILES TO TAS SUCCESSFUL
    </Content>
    <NewLineDelimiter>
    |
    </NewLineDelimiter>
    </WriteLog>
    </part>
    </InvokeWindowsLoggingWebService_InputVariable>
    </input>
    -<fault>
    -<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="summary">
    <summary>
    exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 415 Unsupported Media Type
    </summary>
    </part>
    </remoteFault>
    </fault>
    </messages>
    [2010/04/16 17:26:35] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
    -<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="summary">
    <summary>
    exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 415 Unsupported Media Type
    </summary>
    </part>
    </remoteFault>

    I generated a proxy service in jdev and used the same parms as was done on OAS...
    <WriteLog xmlns="http://tempuri.org/">
    <FileAbsolutePath>
    R:\CV & RM\upload_from_test.log
    </FileAbsolutePath>
    <Content>
    ||*************************************************************************************|Append to log file 2010-04-16T16:57:08-04:00|*************************************************************************************||START DATE: 2010-04-16T16:57:08-04:00|END DATE: 2010-04-16T17:25:58-04:00|COUNT: 106|TRANSFER OF FILES TO TAS SUCCESSFUL
    </Content>
    <NewLineDelimiter>
    |
    </NewLineDelimiter>
    </WriteLog>
    and was able to call the service fine and it returned successful. Just seems to be an issue on the server when I execute it from there.

Maybe you are looking for