Type of plastic used for the nano

Does anyone know the type of plastic used for the front of the nano. I am just trying to find out so I could see if that Novus 2 scratch remover will work. Thanks

Good luck finding out - I'm guessing only Apple developement knows the type of plastic they are using in Taiwan or China (wherever the Nano is made)!
If you try the Novus, I recommend using Viva brand paper towels. They are very soft, and I always use them along with the Novus. No sense in using a harsh towel to apply the Novus, only to scratch the Nano while buffing the Novus off!
Give Novus a try. It can't hurt!

Similar Messages

Little plastic piece that the nano fits in but what is it for??

Ok, I give up. I feel like I'm on candid camera or something trying to figure out what this random piece of plastic included with the nano is for. The nano fits in one side at a slight angle which is cool, but the underside is configured for something (WHAT??) and is useless for putting the nano in until I figure out what. It definitely doesn't sit on the table.
Go ahead, tell me it's something obvious... I don't care... I just want to know what it is!!!
iPod Nano (2nd Gen)

Don't worry. It happens to me too, and it's not so obvious. As it is said in this thread, that "random piece of plastic" is an adapter for the universal dock. That means you can use it for plug your iPod Nano into an apple speaker, for example, otherwise you would only plug an iPod (1st, 2nd etc. generation, I mean, "the classical" iPod) on it.
Greetings.
Víctor

Need Help regarding which Material Type to use for the Scenario

Hi,
Here we are configuring the service scenario.
Suppose Electric Switch of customer flat is not working.
Here in this case I will purchase the switch. And along with service order
I will do the delivery of the Material. Then will raise the Invoice to the customer
with service charge as well as material cost.
Here I will have to run the MRP also for that material to raise the PR if stock goes below
the reorder point.
So I will have to maintain the Purchase view, Sales View & MRP view to that Material.
So in this case which standard material Type can I use for this material? Or I have to create
our own material Type for this material.
Regards,
Pradip

ROH is usually a material type that is supposed to be consumed in production.
HALB is a semifinished good, own produced and meant to consumed in production.
Both are usually not forseen to be sold.
A material that you buy yourself and sell to a customer is a trading good, which is HAWA in SAP.

HT1206 I can't log into the Itunes store. I type in my Apple ID and my password and the message "This Apple ID cannot be used for the iTunes Store." "Enter another Apple ID." I need help on fixing this.

I can't log into the Itunes store. I type in my Apple ID and my password and the message "This Apple ID cannot be used for the iTunes Store." "Enter another Apple ID." I need help on fixing this.

Yeah I'm starting to see a ton of forums posts right now about the same thing :/ I wonder what's going on

My ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes?

Error MIGO AA629 Balance for transac type group 10 negative for the area 01

Hi
I have the following principal case in the PRD (version 60.0 ECC):
Active 25000549 number was discharged from the transaction MIGO 18/12/2009 USD 19295.22 and began to depreciate on 01.01.2010.
On 22.04.2010 the vendor issues a credit note USD 11626.96 therefore created the Purchase Order number 9900000903 and when it will account for the transaction MIGO get the error message AA629 ( Balance for transaction type group 10 negative for the are). In transaction MIGO are using the kind of movement 161.
SAP looked in and found a related note the following: 497297, 541200, 547233 but they refer to version 4.7 and 4.6C and make no reference to version 6.0.
The error detail is as follows:
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 000025000549-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System Response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
My questions are: someone has thought of something similar? how to solve? must implement the foregoing notes?
Thank you very much for your kind help

Hi,
notes 20347 and .302756.
Try to change following customizing temporarily to 160:
IMG->FI-AA->Transactions->Determine default transaction types for
     internal transactions->Acquisition from goods receipt
Another alternative could be to TEMPORARILY change the definition of transaction type group 10 so that it allows negative values.
139899   AA629 when posting MR01/MRHR/MIRO invoice receipt
AA629 is raised when the transactions per transaction type group in one year are negative in balance and the definition of the transaction type group only allows positive values (that means TABWG-VZJSAL is '+'). This is the case for transaction
type group 10. After posting transaction I recommend to set transaction   group 10 back to its original definition.
Regards Bernhard

What brands and type can I use for my iMac 20" internal Hard Drive?

what brands and type can I use for my iMac 20" aluminium internal Hard Drive?
can I use WD caviar black?
is it too hot?

If you are replacing the drive because the existing one is faulty, that's one thing. If you just want more space, you should take advantage of having a decently fast and relatively small capacity drive in there now (instead of a huge drive). Get an external FireWire drive and off-load most of your user data there. Make your internal drive dedicated to mostly your OS and app files, with plenty of free space. That setup will make your iMac run more efficiently. I won't go into more detail, because I'm not answered your specific question... You can post back with any questions, if interested...
To answer your questions...
You should be able to use any SATA 3.5-inch drive internally, but you should probably keep it at or under 1TB. The main concerns are power usage and heat dissipation. A drive like the WD Caviar Green would be ideal in terms of power and heat, but they do have slower (or variable) spin rate. I have one as an external drive (750GB) and it is amazingly quiet and cool. If I had to replace the internal drive because the current drive failed, I'd put it inside. I'll trade a bit of pure performance for the efficiency (including low noise), and these drives are more advanced with higher data density and larger cache, so the trade-off from slower spin rate may not be so bad.
You can check your current drive's model number (which is shown in System Profiler) to get the specs online. The stock drive in my old +Late 2006+ iMac is a 7200 RPM drive. The Caviar Black is a 7200 RPM drive, with a newer design. So if you want to use a Caviar Black in there, I think it would be OK.

What data is used for the link title in osssearchresults.aspx

In our OOTB SharePoint installation we have a search results page in a collaboration site that displays Word documents. Each word document has a Title property, however the text used for the hyperlink to the document in the search results page does not seem
to use the Title property, instead it uses some text from inside the document, e.g. the contents of the first H1 tag.
I had a look at the XSL of osssearchresult.aspx core results web part, and this uses a "title" parameter. So I can only assume that when SharePoint search catalogues a Word document, it decides to ignore the title property of the list item
and instead derives the title text from content within the document itself.
Is that correct? Or am I missing something? Can I change the title for Word documents in search to be the actual title of the list item?

Hi,
The word documents have two columns “Name” and “Title” by default. The “Name” column is the file name and is “file” column type, its related Crawled Property is ows_LinkFilename
. The “Title” column is the document title and is “Single line of text” column type, its related Crawled Property is ows_Title . When SharePoint Search crawls the word document, both the two columns are crawled. However, the ows_Title
crawled property is mapping to “Title” managed property, but the ows_LinkFilename crawled property does not map to any managed property. In the SharePoint search results, the word document shows its “Title” managed property.
So for your scenario, the search result should show the “Title” column value. Please go to your document library and verify the “Title” column’s value of your word documents.
For more information, you can refer to the thread:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/4e1749cd-cf4d-46d6-98e2-3f42366e376e/how-does-the-search-result-are-displayed?forum=sharepointadminprevious
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Any Idea Which Message type/Idoc Type should be used for FI Invoice

Hi Experts,
Any idea what message type/Idoc type should be used for FI invoice. We are going to send IDOC from R/3 to Non-SAP System using ALE. We are using T-codes FV60/FV65.
Thanks,
Sony

Hi Sony,
I never dealt with FI IDoc.
I think you need to setup EDI outgoing payment in IMG. Please take look this report <b>RFFOALE1</b> - ALE Distribution of Payment Data and <b>RFFOEDI1</b> and check also the program documentation.
Hope this will help.
Regards,
Ferry Lianto

Games for the nano 6th generation

Question for Apple:
Are the any plans for additional updates. For example it would be good if there were a few basic apps/games for the nano considering the price associated with it.
Please note I understand that there is limitation to what can be added due to the size, however I do believe that adding simple card games such as solitaire, hearts, black-jack would really enhance the product and increase customer satisfaction of the product.
I brought this Ipod to replace my classic version with probably the same size screen(but not touch) and that came with games.

Are you referring to the iPod Classic that you can currently buy? If yes, that screen is quite a bit larger but more importantly you use the click wheel as control for any games, such as solitaire, black jack, etc.
With the current touch screen you would have to have awfully small hands and very good eyes to use the screen to control the game plus see what was happening at the same time. But it really doesn't matter as there is no Software Development Kit (SDK) available to developers for the Nano OS, so there is no possible way for them to develop games.
If with all these limitations you would still pay for games on the Nano (not sure what the price has to do with it), you need to send your request to Apple, they are not here.
http://www.apple.com/feedback/ipodnano.html

What are the materials used for the earbuds/earphones??

What are the materials used for the earbuds/earphones?? Like whats the plastic used and what are the speaker materials and the volume button???

Hello Veronica176
The materials in Apple headphones include Neodymium magnets, oxygen-free electrolysis copper wire and a Nickel plated plug
Apple uses Neodymium magnets in their headphones as it is much more magnetic compared to that of a ferrite magnet. This also further enhances the accoustics of sound and preventing any loss of sound. Because of this, you can get the same sound out of Apple headphones as the good ol' circum-aural headphones (image attached).
Oxygen free copper wire is created through electrolysis which is furthermore considered an above average material for headphones, thus ensuring better sound quality. Oxygen free copper wire ensures a faster transfer time (as copper is one of the best conductors) and because of this, allows a faster transfer time, minimising loss. This means the sound quality of the music/sound playing may actually depend more on the quality of the MP3 file than the headphones.
The nickel plated plug used by Apple is a standard connection and joins to a female connection into the iPod (for example) which is also nickel plated. Where gold plated plugs are renowned to transfer more data and superior sound quality when connected to any device. Connecting the same metals during transfer (nickel plated plugs and nickel female connections) ensures optimum sound as the signal will not be jumping different kinds of metal. The lack of gold plating also helps to reduce the cost in manufacturing and to the customer.
If you have any more queries, please feel free to ask further questions, it is what we are here for

How many memory is used for the process of one connection?

Hi,
how many memory is used for the process of one connection in unix
when the user connects to the database?
Thanks,

Write some queries using v$sesstat, v$statname, v$session to find the statistics for different stats. Query name from v$statname and find whatever you wants. I don't think there is a common rule that tells how much memory will be used for each connection, it depends on different factors like , resources available, type of databases, database memory settings etc.
Example query.
select s.osuser osuser,s.serial# serial,se.sid,n.name,
max(se.value) maxmem
from v$sesstat se,
v$statname n
,v$session s
where n.statistic# = se.statistic#
and n.name in ('session pga memory','session pga memory max',
'session uga memory','session uga memory max')
and s.sid=se.sid
group by n.name,se.sid,s.osuser,s.serial#
order by 2
;

The BEST Armband for the Nano

Besides the Apple armband, is anyone using an armband for the Nano that covers it well?
- SpeckProducts SkinTight armband + skin
- Incase Sports Case with Armband
- Marware Sportsuit Convertible for iPod nano with armband
- XtremeMac Sport Wrap

I too would like peoples opinions on the best armband. i am looking at getting the invisble sheild as well so I would like to know what case with armband fits over the invisible sheild. I am not interested in teh apple one as this one seems like the ipod will fall out if i were upside down (and yes, when i'm working out i just might be upside down

Since installing update on 6/25, printing pdf pages OK, but bank account activity type is too large for the page. How do I shrink the type?

Since installing Firefox v.3.6. 6 update on 6/25, printing bank statements in pdf format is still OK, but when I select the print option for my bank account activity the type is too large for the page. How do I shrink the type? We are running Windows XP.
== This happened ==
Every time Firefox opened
== I installed Firefox update on 6/25

Firefox doesn't display PDF files all by itself, it uses your PDF reader program which is also what handles the printing of that file type.
As far as the large printed font from Firefox, open File > Page Setup and see what the '''Scale''' is set to. 100% is usually the best setting, but you might need to use a smaller setting.

Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.

Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.

Where are you physically located?
What country's Store are you using?
The two have to be the same and the payment method for your account also has to be associated (billing address, where iTunes gift card was purchased) with that country.
Has the ID(s) worked before for purchases for this country's store?

Type of plastic used for the nano

Similar Messages

Maybe you are looking for