Type on Right Side of Perspective Grid
Hi,
I'd like to have a document where I have type skewed on both sides of the perspective grid. I know how to put it on the left side of the grid: Create the type, get the Perspective Grid Selection Tool, select the type and bring it onto the grid and it skews to the angle of the grid. However, when I try to do it on the right hand side of the grid it doesn't allow me. It only lets me angle it on the left hand side of the grid.
How can I get it to write on the right hand side too?
Thanks!
With the Perspective Grid Tool or the Perspective Selection Tool click in the Active Plane Widget to activate the plane you want to work in. If the widget is not visible, double click the Perspective Tool in the Tools panel and activate it. The relevant information is in the Help files.
Similar Messages
-
My problem is that 1-, 2-, and 3-point perspectives do not semm to provide the perspective I need. and suggestions?
There's no attachment.
You need to upload your sketch via the forum web interface. -
Perspective Grid: How do I draw a cube showing only its TOP and its FRONT?
Can I create this with Illustrator's Perspective Grid? the 1-, 2-, and 3-point perspectives don't seem to be what I need...
Yes you can draw it with perspective grid.
Set up perspective grid
Draw a square and rotate it 45°
then drag square into perspective grid
Make a copy by pressing Alt and 5 and moving up
(to measure the distance you could place a copy of the square from step one on one of the sides in perspective grid)
Then use the pen tool to draw the front side by connecting the dots. -
I have illustrator cs5. I have front, side, rear, plans of vehicles. I need to create 3D illustrations. I did a line trace of these elevations and projected them to the perspective grid using the perspective tool. I got distorted image on each side of the grid. What do I need to do?
Please show.
-
i dropped my i phone 5 and i picked it up and my right side of my phone is black i can still type on it but there is no display what do i need to do to fix my phone?
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
If the issue persists you may have a hardware issue due to the Drop... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
Hi,
I am trying to familiarize with the perspective grid and I could not find similar topics already addressed anywhere, so I'm posting my question here.
All the tutorials I have seen, and also all the examples, refer to a "convex perspective grid" that is typically the drawing of a cube seen from outside (like a building seen standing in front of it on the other side of the street).
What about a cube seen from inside?
For example, let's say I have arworks that represent paintings to be nailed on the wall of a room, and artworks representig the carpets to be laid on the floor.
Can I use the perspective grid to represent the inner walls of the room?
I understand that any given plane of the perspective grid extends beyond the visible grid itself, so I can draw "towards me" in a way that the external-right wall is the internal-left and so on, but I am struggling to get the results I expected.
Is there any better way to do it?
thanks a lot,
Cristiano.
(BTW, I tried to attach an example image, but I get "That type of image is forbidden"... no matter what imaeg extension I try bmp/png/gif/jpg, how do you attach images here?)Thanks, that's what I was looking for. Though I have to admit it took me a half hour to get it to work.
And it's still clunky to work with. I don't think I'll be using it much.
And I haven't been able to summon that dialog you show. I've tried double clicking everything with either Grid tool selected. I'm just not seeing it.
Thank you, anyway. I wouldn't dare using the Perpective Tool without this feature.
About the Free Transform Tool:
What I meant was I'd like to be able to freely distort any object or group in order to make a faux perspective.
When you select an object and summon the Free Transform tool you can stretch any corner independent from the other corners using a secret keyboard shortcut which I can't remember anymore. I hate how so many functions are hidden behind secret keyboard presses in order to make something work.
Actually, I just found it in my notes. With the Free Transform Tool you have to start moving a corner, then, and only after you started to drag you can press the Command (or Control) and then you can stretch that point. I made a sample below. I should have made it into a group of objects so it was clearer what was happening.
Anyway, imagine this: say you have a simple rectangle. With the Direct Selection Tool you can move any corner without disturbing the other 3. That's what I'm looking for. I'd like to do that with any object or group. The problem is when you use the Direct Selection Tool to do it, the Bounding Box resets after every move. If you distort it too much, the corner points in the bounding box quickly become harder to use because they are so distant from the "corner" of the object which they are controlling.
In Corel DRAW it's so amazing simple rather than the clunky steps I have to go through to do it in Illustrator (as in the video). -
Regarding ALV Header to display at Right side of Header
Hi dudes..
How to handle ALV header to print content at right side of the report out-put.
If we use ALV_list dispaly line size ends to 80 and Other than
using OOP's is there any way to do this..
Could You please let me know.How to handle this issue??
Regards,
SgHi,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZALV_PRDS'
i_callback_user_command = 'USER_COMMAND'
i_callback_html_top_of_page = 'HTML_TOP_OF_PAGE' "for header alignment
it_fieldcat = t_fcat
i_save = 'A'
it_events = t_eve
TABLES
t_outtab = itab
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM html_top_of_page USING document TYPE REF TO cl_dd_document.
DATA: text TYPE sdydo_text_element.
CALL METHOD document->add_gap
EXPORTING
width = 200.
text = 'Material Information'.
CALL METHOD document->add_text
EXPORTING
text = text
sap_style = 'HEADING'.
CALL METHOD document->new_line.
CALL METHOD document->new_line.
CALL METHOD document->new_line.
ENDFORM. "HTML_TOP_OF_PAGE
For more details, refer to the methods of the class cl_dd_document
Also check the below link.
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=37566
Also this link
Report header using ALV Grid(oops)
Please reward points if it helps
Thanks
Vikranth -
Perspective Grid -- What about Unique Perspectives ?
Using the perspective grid in Adobe Illustrator CC 2014, is it possible to make a perspective that follows the two angles of this image that create an angle sort of like the top of a letter "A" ?
I was able to move the right side of the perspective to the left to create one of the desired angles, but I can't seem to rotate the left side to end up with the other angle.I think I got it....... I was able to see another control when I zoomed out..... I dragged this control until I got the desired angle.
The perspective tool initially appears in the perspective of a letter "V". If you want to have an "A" shaped perspective, I presume you have to drag the right side to the left, and drag the left side to the right to create this other perspective. -
Perspective Grid from 3D Extrude Revolve Default
I want to create a perspective grid based on a rectangle that has been 3D extruded and revolved using default settings. The 3D default setting doesn't have any perspective so that means the resulting 3D shape is in 2-point perspective, right? So I should use the 2-point perspective grid and try and draw out all the little widgets and controls to match the sides of the 3D rectangle? That's what I've tried and am having a heckuva time getting the sides to match. Maybe because I can't get those vanishing points out far enough? Or maybe I should be using the 3-point perspective grid to try and model the rectangle with that? I had more trouble with that, though. Not strong with illlustration / perspective, but determined to create a grid that matches! ... Can anyone do this?
Yep. I quit futzing with the perspective grids and just created my own custom isometric grid and was able to accomplish what i set out to. Thanks.
-
Changing a shape inside a perspective grid
Hi everyone,
I've created a 2-point persective grid on top of a cube (see image below). I'm tyring to recreate the cube and have started by inserting some purple squares into the right side of the perspective grid. I've drawn an ellipse at the corner of the original cube that I'm trying to copy, to indicate where I need my squares to stretch to.
Can anyone tell me how I can stretch my purple squares in perspective so that they match the end of the orignal cube as indicated in the image below? I've tried skewing but this doesn't skew in perspective.
Appreciate any advice.Thanks for the reply,
I've just switched over to a 3-point perspective as you suggested. The top plane works perfectly but as you can see in the first image the right plane is all distorted and is still not lining up with the template. The second image is a bit better as it's aligning at the top but the bottom and right sections don't align.
Would you know what I'm doing wrong? -
How to populate/persist right-side of Shuttle in apex 3.1.2 after submit
In the new Shuttle I can only specify one LOV (select empname, empid from emp where empid not in (1,3,4)) but I also want to populate the right-side of the shuttle to show values which the non-members (select empname, empid from emp where empid in (2,5)) so that the user can make selections which persist after submit.
Rashid,
The method that worked for me was to:
1) Create the LOV to populate the Left side of the shuttle (unselected).
2) Define the Source property to populate the Right side (selected). In my case, I used a PL/SQL Function Body type, but any would work.
I set the Source Used to Always, so that my user always started with the same default selection, but if you set it to "Only set when session value is null", that should do what you're asking for.
Good luck (and thanks for the points by marking my answer helpful or correct),
Stew -
A clean install on my MacBook Pro has left me with my icons stuck in the grid on the right side of my desktop. I had the ability to move them and have them stay put in various sectors of the desktop, which I found very useful. The clean install upgraded the OS to 10.6.8 from 10.5.8. I want to move them again but there I see no 'None' option which I think would free them to move where I wish. Has the upgrade deleted that option? Suggestions? I am new to this community and if not new to Mac, I often feel that way. This is one of those times.
Julz11 in NYCI have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.
-
When I right click and go save image/page/ect as the file save popup screen appears and on the right side of the File Name bar there is an arrow. If you click the arrow it shows the last 20? items that have been saved and their save location. Is there anyway to not have the list of recent items there or at the very least a way to clear them? I'm running Firefox 17 on Windows 7.
Also when you save items as you were typing in the name you want to save them as it used to show filenames with the same name as you type that are saved in that directory so instead of typing the whole filename or copy/pasting you could start typing a filename and then hit the up or down arrow, backspace and just change the end of the filename without having to retype the entire filename.
Hopefully you understand what I mean and can help me fix it, thanks.It's in the proper directory. I can scroll down the window on the right and see the files but if I start typing the file name of one of them the autocomplete drop down thing that shows matching file names does not appear. In the back of my mind I'm starting to think a setting got changed and then the list of matching file names stopped appearing but I can't recall what setting may have been changed, if it was a firefox or microsoft change or for certain if anything got changed at all. Yeah I know I'm not helping my own cause but what can you do.
-
How do you populate right side of Shuttle control
Hi,
I am trying to use shuttle control. I am not sure how to populate the right side of the shuttle control from database. I am using the following code. But, it is not populating the right side. In this code, P35_COUNTRIES is my shuttle. P35_X is a text field just to test the output. I can see an output 5:8:9 in the text field. But, my shuttle right side is empty. Am I doing something wrong here ? I would really appreciate any suggestions.
DECLARE
vCountries VARCHAR2(100);
vSEP VARCHAR2(1);
BEGIN
:P35_X := 'Inside test';
vCountries := '';
FOR C IN (SELECT country_id FROM countries WHERE territory_id = 1)
LOOP
vCountries := vCountries || vSEP || c.country_id;
:P35_X := vCountries;
vSEP := ':';
END LOOP;
:P35_COUNTRIES := vCountries;
:P35_X := vCountries;
END;
ThanksHi,
Yes, it is getting populated: [http://apex.oracle.com/pls/otn/f?p=30879:5]
My Source settings for the shuttle ("P5_SHUTTLE") are:
Source Used: Only...
Source Type: Static Assignment...
Source Value: (Blank)
Post Calc Computation: (Blank)
Default Value: (Blank)
List of Values Definition: SELECT DNAME d, DEPTNO r FROM DEPT ORDER BY 1
Settings for my Computation for this item:
Item Name: P5_SHUTTLE
Type: PL/SQL Function Body
Computation Point: Before Header
Computation:
DECLARE
vDEPT APEX_APPLICATION_GLOBAL.VC_ARR2;
i NUMBER := 1;
BEGIN
FOR c IN (SELECT DISTINCT DEPTNO FROM EMP WHERE ENAME LIKE 'A%')
LOOP
vDEPT(i) := c.DEPTNO;
i := i + 1;
END LOOP;
RETURN APEX_UTIL.TABLE_TO_STRING(vDEPT);
END;This computation is unconditional, so runs everytime the page is loaded.
Andy -
Why negative sign is appearing in right side of output
Hi ABAP Gurus ,
I have wrriten a BDC which display the output and also downloads the list into
notepad. While displaying output on the screen that particular field shows
minus sign on the right and in the downloaded file the sign is in the
extreme right side. In earlier version 4.6 they have used WS_DOWNLOAD
which gives correct downloaded file (with minus sign appears at the start
of the field). This field is of packed decimal type. Now we have used
GUI_DOWNLOAD.
Tried 3 to 4 times by changing some of the fields but still the minus sign
appears to be at the right side of that field.
Thanks in advance
Downloaded output file is as follows
"5T7025" ="åeÊlRRÌJ@@@@@@@@@@" 2939407.00 ="" 2003 ="01" ="" ="CH0605"
="5T7026" ="V^lQUÌJ@@@@@@@@@@@" 1728887.00 ="" 2003 ="01" ="" ="CH0606"
="5T7027" ="êÌgrspû³|vE[ÌJ" 589757.00 ="" 2003 ="01" ="" ="CH0607"
="P331C14000" ="`F[pCvfRc|b`c»ð" 27447.00 ="" 2003 ="01" ="" ="CH1103"
="" =" dChHVXeퟂ@@@@@" 268597.00 ="" 2003 ="01" ="" ="CH1106"
="F331-C15100" ="VEÔçqÅṳ@@@@@@@@" 480315.00 ="" 2003 ="01" ="" ="CH1112"
="P335C140004" ="å^A~DiVOOfsjÌJ@@@" 582054.00 ="" 2003 ="01" ="" ="CH1601"
="P2D7-C13001" ="@@ÕËifjV~ [^ÌJ@" 67408.00 ="" 2003 ="01" ="" ="CH3020"
="P362C14200" ="¶²Ý^{³uÌJi»ÌQj@" 902669.00 ="" 2003 ="01" ="" ="CH3503"
="" ="ºÖHd»Y§Öà(ÛÅÎÛ)@@@@" 370261.00 ="" 2003 ="01" ="" ="CT1101"
="" ="ºÖHdGWjAO§Öà(ÛÅÎÛ)" 1734655.00 ="" 2003 ="01" ="" ="CT1104"
="" ="tHÐ@ºÖcƧÖà(ÛÅÎÛ)@" 4200.00 ="" 2003 ="01" ="" ="CT1106"
="" ="[C§Öà(ÛÅÎÛ)@@@" 56842.00 ="" 2003 ="01" ="" ="CT1107"
="" ="®ïÐt[YHa§Öà(ÛÅÎÛ)@" 39457.00 ="" 2003 ="01" ="" ="CT1108"
="" ="ÖåhbNT[rX§ÖàiÛÅÎÛ)" 1334141.00 ="" 2003 ="01" ="" ="CT1109"
="" ="jcrCUÉηéÞ¿ï§Ö¦@@" 38728.00 ="" 2003 ="01" ="" ="CT1110"
="" ="jcr®ÍÉηéÞ¿ï§Ö¦@@" 89919.00 ="" 2003 ="01" ="" ="CT1111"
="" ="jcrHÉηéÞ¿ï§Ö¦@@" 3601.00 ="" 2003 ="01" ="" ="CT1112"
="" ="©HºDݧÖà(ÛÅÎÛ)@@@" 14304.00 ="" 2003 ="01" ="" ="CT1116"
="" ="jcrCUiDÌÛCUfjÉηéÞ" 276940.00 ="" 2003 ="01" ="" ="CT1120"
="" ="jcrCUiDÌÛDÌHìfjÉη" 40064.00 ="" 2003 ="01" ="" ="CT1121"
="" ="jcrCUi@dÛ@fjÉηéÞ" 355985.00 ="" 2003 ="01" ="" ="CT1122"
="" ="jcrCU(@dÛOf)ÉηéÞ" 124908.00 ="" 2003 ="01" ="" ="CT1123"
="" ="Jgªï§Öà(ÛÅÎÛ)@@@@@@" 2272.00 ="" 2003 ="01" ="" ="CT1200"
="" ="JgºDx§Öà(ÛÅÎÛ)@@@" 14249.00 ="" 2003 ="01" ="" ="CT1201"
="" ="ºÖHd»Y§ÖàiÛÅÎÛOj@@@" 118669.00 ="" 2003 ="01" ="" ="CT1801"
="" ="ºÖHd´Ý¼ÞƱØݸާÖà(ÛÅÎÛO" 820881.00 ="" 2003 ="01" ="" ="CT1804"
="" ="[C§ÖàiÛÅÎÛOj@@@@" 1016.00- ="" 2003 ="01" ="" ="CT1807"
="" ="ÖåhbNT[rX§ÖàiÛÅÎÛOj" 644964.00 ="" 2003 ="01" ="" ="CT1809"
="" ="gPSDPPDPt]Cïp(â _Kj" 33132.00 ="" 2003 ="01" ="" ="CT2064"
="" ="onimPOUTDmPOUWjÄÂó" 2200.00 ="" 2003 ="01" ="" ="CT2938"
="" ="arvWFNg»nH@dC¿àæè" 1634592.00 ="" 2003 ="01" ="" ="CT2947"
="" ="arvWFNg»nH@ ¹¿àæè" 267260.00 ="" 2003 ="01" ="" ="CT2952"
="" ="»Ì¼¼¥ïp|·úO¥ïp" 613560.00 ="" 2003 ="01" ="" ="CT4105"
="" ="OÆRϼÐÚ°¼®Ý¼½ÃÑJ" 19659.00 ="" 2003 ="01" ="" ="CT5126"
="" ="²ÝÀ°È¯Ä²B¼½ÃÑÆÞ¼½ÃÑÌA®" 7639.00 ="" 2003 ="01" ="" ="CT5127"
="" ="ºDICpX[hÇVXe" 16511.00 ="" 2003 ="01" ="" ="CT5128"
="" ="NAPA¼½ÃÑ(¿Ìijª±)±ü" 509840.00 ="" 2003 ="01" ="" ="CT5200"
="" ="gPTNSPPúíQHi" 57228.00 ="" 2003 ="01" ="" ="CT7059"
="" ="ÖåhbNT[rX()§Öà(Ûŵ)" 2909250.00- ="" 2003 ="01" ="" ="CU15260"
="" ="ºÖHd»Y()§Öà(ñÛŵ)" 488930.00- ="" 2003 ="01" ="" ="CU21830"
="" ="()[C§ÖàiñÛŵ)" 55826.00- ="" 2003 ="01" ="" ="CU30210"
="" ="ºÖHdGWjAO()§Öà(ÛÅ " 2555536.00- ="" 2003 ="01" ="" ="CU31750"
="" ="Jgªï§Öà(Ûŵ)" 2272.00- ="" 2003 ="01" ="" ="CU70002"
="" ="JgºDx§Öà(Ûŵ)" 14249.00- ="" 2003 ="01" ="" ="CU70003"
="" ="()tHкÖcƧÖàiÛŵ)" 4200.00- ="" 2003 ="01" ="" ="CU70005"
="" ="()t[YHa§ÖàiÛŵ)" 39457.00- ="" 2003 ="01" ="" ="CU75928"
="" ="©HºDݧÖà(Ûŵ)" 14304.00- ="" 2003 ="01" ="" ="CU80510"
="" ="ÆÔhihÒFä~ÛQ¼j" 36952.00 ="A10905-00004" 2003 ="01" ="AMHI" ="CT2302"
="" ="ÆÔhihÒFä~ÛP¼j" 44896.00 ="A10905-00004" 2003 ="01" ="AMHI" ="CT2307"
="" ="·DqDÖA`[WïpæèZß@@@" 3630420.00 ="A9GA00-16001" 2003 ="01" ="AMHI" ="CT2312"
="" ="Vú{CtF[ütF[ÝvìÆ@@" 27169103.00 ="A12191" 2003 ="01" ="AMHI" ="CT4907"
="" ="Vú{CtF[ütF[iQDjÝ" 1217564.00 ="A12192" 2003 ="01" ="AMHI" ="CT4909"
="" ="WX®AÚ_ÁHiUO{j@@@@" 2912394.00 ="AS1149-16465" 2003 ="01" ="AMHI" ="CT4955"
="BP300-B13000" ="ì®ûnÝvìÆ@@@@@@@@@" 1609296.00 ="B85833037990" 2003 ="01" ="BMHI" ="CT4954"
="" ="R^R¡»»nɨ¯éÐQ¶Éº¤u" 5210.00 ="D31841-44001" 2003 ="01" ="DMHI" ="CT2339"
="" ="uZnî²võ³çi¯R[Xjvu" 125731.00 ="KZ61B517-441" 2003 ="01" ="KMHI" ="CT2455"
="" ="u¶YZpè@iK{jvuÀutoï" 5543.00 ="KZ61B237-441" 2003 ="01" ="KMHI" ="CT2456"
="" ="ÌpåWïp@@@@@@@@@@@@@" 7049.00 ="QJK110-6002" 2003 ="01" ="QMHI" ="CT2002"
="" ="æ÷ðïÌo£·ïæèÜÆß@@@@" 45166.00 ="QJK002-4400" 2003 ="01" ="QMHI" ="CT2041"
="" ="lÎJƱüvvWFNgæèZß@" 625986.00 ="QD0013-0900" 2003 ="01" ="QMHI" ="CT2060"
="" ="DÌ¢pThCb`plÌúÀp" 327512.00 ="QR3115-209C" 2003 ="01" ="QMHI" ="CT2505"hai,
this is not a right type to upload data into an sap
i think that please change the file type into notepad formate and download it through gui_upload
award points if usefull
regards,
jai.m
Maybe you are looking for
-
I no longer have my iPhone, but I need to un-encrypt it how do I do that?
I have a new samsung phone and I want to transfer some of my music to my new phone, however it tells me that my itunes in encrypted to my old iPhone and I need to unencrypt it. How do I do that if I no longer have the iPhone? Please help someone jr
-
When backing up the Photoshop Elements 11 catalog, what exactly gets saved?
When backing up the catalog, what exactly gets saved? Message title was edited by: Brett N
-
How to make a DFF as Read only field
How to make a DFF as Read only field
-
C_SOA200_70 : ASSOCIATE ENTERPRISE ARCHITECT on TechEd, bangalore
Hi, I want to appear certification exam C_SOA200_70 : ASSOCIATE ENTERPRISE ARCHITECT on TechEd, bangalore. Where can I find reading material for this other than SDN. Do SAP has any document for E-SOA like help.sap.com? Thanks, Ashok
-
For some reason I cannot get into FCP today, it crashes when I use the icon or try to open a FCP document. The only thing I've done since using the program yesturday was update security and iTunes software.