Type Perspective Movement
Hi everyone,
I was wondering if anyone could please help me out with this issue I'm having. I have this type with a single point perspective on it and I wanted to add motion to the perspective. In other words, I want the perspective point to move around the type in a circle. I apologize if I'm not clear, but I've attached an image of my storyboard to help illustrate.
Can anyone offer some advice on the best way I can approach this in After Effects?
Thank you so much in advance!
-Mike
The first thing that comes to mind would be to animate the position of the LUCE portion of the logo and apply the echo effect. You'll need two copies. Colored letters on the bottom, black letters on top. Apply Echo to the bottom copy. You'll need a large number of echos and and a small negative time value. You'll also have to pre-compose the bottom layer to get echo to work.
Similar Messages
-
what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?
Per http://www.apple.com/ipad/specs/
AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format -
Condition Type and Movement Type
Dear all,
Could anyone explain how the relationshipship between condition type and movement type are being maintain?
Example : WE03 and Mvt 101,
WA03 and Mvt 201.
Is there any table or tcodes to view these relationship?
Thank you.Hi
Both are linked based on the Transaction event type.
for GR movements the transaction even type is WE
For GI Movements the transaction event ype is WA.
Thanks & Regards
Kishore -
Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, PaulYou can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec. -
What types of movie files are accepted on the ipad2?
I am trying to trsnsfer movies to my itunes in order to transfer them onto my ipad2.
But when I look for the movies on my itunes I don't see any listed.
What types of movie file formats are accepted to transfer to the ipad2?The Videos app supports these formats (from http://www.apple.com/ipad/specs/) :
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
If you can't get them into your computer's iTunes then there are programs such as Handbrake (http://handbrake.fr) which might be able to convert them. If you can get them into your computer's iTunes but they then won't sync to the iPad, then you could try doing Advanced > Create iPad Version and see if that version syncs over. -
Inspection type to movement type
In SPRO where do we assign inspection type to movement type..
hi,
you can not assign inspection type for Movement Type. It is always Inspection type 08 which is assigned to any movement type in standard, Provided, "QM not Active" indicator is not set in
SPRO>IMG>QM>Quality inspection>Inspection lot creation>Inspection for goods movement>Deactivate Quality Inspection for a Movement Type
Regards,
Amol -
What type of movies and tv shows can I watch on the iPad?
What type of movies and tv shows can be watched on the iPad without having to spend money purchasing from iTunes. I'm guessing Netflix streaming is available, but what other types. Does Tivo tranfer work, any others? Thanks
http://www.apple.com/appletv/whats-on/
these -
What type of movie files can I put on my Ipod Video?
What type of movie files can I put on my Ipod Video?
the only formats that can be synced to the ipod video is .mov and .mp4.
you need to convert the videos to these formats using 3rd party software.
To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: http://www.videora.com/en-us/Converter/iPod/
If you have questions: http://www.videora.com/en-us/Converter/guides.html
If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
GFF -
101 Type of movement. problems in posting materials
Hi, dear SAP gurus. I have found a strange problem when i tried to post materials(in MIGO transaction, 101 type of movement).
I chosed "Goods Receipt"-"Purchase Order", 101 tpe of movement, then entered a number of purchase order, all materials opened, everything OK. Then I click "To Check". The system write that "the document is OK". But when i try to post, there are appears a mistake:
"Account determination for entry "in such a chart of accounts" WRX "in such a company code" , "in such an account" not possible
Message no. M8147
Diagnosis
The system did not find an account for this transaction. This means that the account determination for key CAUA WRX OBL0 ___ 2010 is not maintained in MM Customizing (Valuation). The key is made up of:
Chart of account
Transaction key (= Posting transaction)
Valuation grouping code
Account grouping code
Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Procedure
Contact your system administrator.
If you have the authorization, check the Account determination in Customizing for Valuation.
Proceed
Note
The relevant posting transaction can be found in Table T030A."
Please, help me. What is wrong? I have already checked every customization(types of materials, materials data, the chart of account, OBYC transaction and WRX operation. Everything is right. All worked last month, i made such operations and thre was no problems. I need to test MRP in few days but this mistake is killing me.........HELP
Edited by: Jürgen L. on Feb 1, 2012 11:45 PM
Subject changed to meet the forum rulesSAP gave you already the content that is misses in the account determination:
CAUA WRX OBL0 _ 2010
SAP is searching for this combination in your customizing table T030 because it knows those values from customizing and master data.
Hence either your customizing is not complete, or your master data is not maintained well.
you only have to seperate this info
CAUA WRX OBL0 _ 2010
into the different parts
CAUA is your chart of accounts
WRX is the transaction key
OBL0 is your Valuation grouping code
no vlaue for Account grouping code
2010 iis the Valuation class from your material master
so you only need to check if you have an account for this combination in your customizing, (best you do this with SE16 directly in table T030) I am certain you do not have an entry for this combination.
now it is important to know how your entries for WRX transaction key look like in your T030, I mean entries that are close to the desired one.
Do they have an account grouping code?
do they have a different valuation class?
Is 2010 the right valuation class for your material? if not, then change it in material master and try again. -
BAPI_GOODSMVT_CREATE - error for movement type 343 (movement code - 04)
Hi Gurus,
I am using BAPI_GOODSMVT_CREATE for doing transfer posting MB1B.
I need to do transfer posting using movement type - 343 "Blocked to Unrestricted stock"
Movement type - 343
GOODSMVT_CODE - 04 (transfer posintg)
I am getting error message -
E /CWM/MM 001 Transfer the parallel entry quantity/entry unit of measure
Help me with some pointers.
Thanks,
MadanRajesh,
Here is my code for line items:
MATERIAL 100001374
PLANT 1AAE
STGE_LOC B100
BATCH 0111331309
MOVE_TYPE 343
ENTRY_QNT 10.000
ENTRY_UOM EA
Let me know should I need to fill any other fields.
Thanks,
Madan -
BASIS--to restrict authorization for a PO document type & 122 movement type
Dear All,
Plz guide me how to restrict authorization for a PO document type & for a movement type 122 i.e. for eg. if a user has authorization for PO document type IC then he should not be able to rum movement type 122 for any T-code he runs.
Thanks in advance
Arpit
BasisHi,
Your request was not too clear to me.. As per my unde
Here is some details of Authorization object related to Purchase Order:
Document Type in Purchase Order( M_BEST_BSA )
Purchasing Group in Purchase Order (M_BEST_EKG )
Purchasing Organization in Purchase Order (M_BEST_EKO)
Plant in Purchase Order (M_BEST_WRK )
Document Type in Outline Agreement (M_RAHM_BSA )
Purchasing Group in Outline Agreement (M_RAHM_EKG )
Purchasing Organization in Outline Agreement ( M_RAHM_EKO )
Plant in Outline Agreement ( M_RAHM_WRK )
This can be helpfull to you to restrict authorization to PO..
In Organization Level, it can be restricted by Purchasing group, Purchasing organization and plant..
Regards,
Sandip -
Vendor Return process with order type ZPO - movement type 161
Dear Friends ,
Here is my question
There are two scenarios for vendor return
while UD and stock posting , we directly post the stock to vendor return 121
but what is the process for vendor return after we move the stock to blocked stock and then return to vendor
I tryed to create new PO with order type PO return , when do the migo GR system always propose 161 and creating inspection lot
how to stream line the process without inspection lot
Thanks & Regards
RajDear Gajesh,
many thanks
but when i enter the Retrun PO in MIGO system automatically propose the movement type 161 , is there any way to change the movement type , is it standard sap settings
Please advice
Thanks & Regards
Raj -
Report based upon material type against movement type for a period ?
i need a inventory report which should be based upon materil type & movement type for a particular period.
For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
thanks
samHi,
You can create a small program to get report.
Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
Add the below fields to out put
MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
Please take advise from ABAPer regarding prog logic
Thank you,
Anand K -
Output type for movement type for IDOC creation
Dear Experts,
Can anybody tell how to create "Output type for different movement types for IDOC creation"
Specially for Movement type used for Inbound & outbound.Hi,
pls find below link's
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/idoc%2bsteps
BAPI & IDOC material
IDOC Scenario Steps
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://sap.niraj.tripod.com/id51.html
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Changing fields in an Idoc segment
Regards
Raj. -
Purchase Order Type and Movement Type in MIGO
Hi
Is there a way to have a movement type automatically posted in MIGO for different Purchase Order Document Types?
THanksHi
If i understand correctly you want to post a single GR pertaining to 2 different PO's that are created.
If that is the case, I think you cant even post GR for different PO's in a single MIGO.
Thanks
Kalyan
Maybe you are looking for
-
I updated my iPhone to 6.0 and lost a lot of my pics how do I get them back?
I updated my iPhone to 6.0 and now pictures I took last night are missing!!! I already have a iCloud I'd.... How can I get them back??
-
Showing db results in different pages
How can I do to show a query's results that is too long (more than 200 rows) in more than one page (showing next, previous, first and last links)? I'm using a servlet that attends the request and then this servlet forward a jsp page with the results.
-
Reading "TypeRecorder" .kbd files
Is there any program (TextEdit?) - which can read the .kbd files created by the program TypeRecorder? I am a registered used of TypeRecorder, but sometimes want to open the files (text) without having TypeRecorder installed on that computer. Thanks,
-
Customer PO/ Sales order- with/ without qtty
Hi- client is component supplier industry. Client starts production based on customer order. Client will get orders in 2 ways:- 1- Customer PO with qtty - limited to this qtty only.(over delivery is not allowed ) 2- Customer PO w/o qtty - unlimited q
-
Beep sound for every minute in call recordings
Hi, I am using cistera convergence server for call recordings. For every recording, I am observing a beep sound before the recording starts and followed by exactly every 60 seconds. I didn't see any beep in live calls. This is only when I play the re