Type reflowing when converting from CS2 to CS3
We have just converted a lot of our machines over to CS3 but have noticed that some of the type is reflowing differently to our files in CS2, has anyone else come across this.
I have just noticed that it is the kerning that is causing the problem, kerning is set to Auto in CS2 which has given me a value of 0 between two of the characters but in CS3 the value is now -150 (auto), font i am using is Guia Script Pro which is opentype.
Hi ,
You can maintain the order type for conversion of planned order to production order in the T Code OPPE.
Hope it will be clear.
Regards,
Similar Messages
-
Text reflow when converting from rgb spot color to process black
The setup that I'm using is a G5 Mac OSX, version 10.4.11. The InDesign application is CS3, version 5.0.3. The fonts are loaded into Extensis Font Reserve, server 1.7.4. The InDesign document has a text box using 2 different font sets. One set, Helvetica Neue, uses the rgb spot color. The other one, a mixed set of New Century Schoolbook, is used for a paragraph which is process black. When deleting the rgb spot color from the swatches and converting it to process black, the New Century Schoolbook reflows which had already been process black.
If I just select the Helvetica Neue type and change that line to process black there is no reflow problem.
When I tried this document on another Mac with the same set up there was no reflow. Is this an InDesign preference problem? ThanksIf you change the color back and then back again, do you get more reflows?
The reason I ask is that when InDesign opens a document, it holds the existing composition of stories until you apply any edit. So, it could be that what you're seeing here is that yours and your user's setups are different enough that reflow is inevitable the moment you edit the text, and changing the color counts as editing.
Dave -
Order type selection when converting from planned order to prod order
Hello friends,
I have one doubt.That when i am converting the planned order to the production order than from which default settings it takes the order type.
As we can maintain the default order type in OPPQ , under conversion and in production scheduling profile also we maintain order type for make to stock, make to order, etc.
So my question is to which setting the system gives the priority.
Or they both are for different purpose.
Thanking you guys in advance.Hi ,
You can maintain the order type for conversion of planned order to production order in the T Code OPPE.
Hope it will be clear.
Regards, -
Default PR Type when convert from Planned Order
Hi all,
How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
Thanks.
Regards,
AndrewHi,
The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
Please try and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 28, 2008 10:54 AM -
Error:Type mismatch: cannot convert from Long to Long
hi friends,
I've a problem.I've a JSP that does some long converions,and its working fine when i make it run on my machine i.e
(Running Tomcat5.0),but when I deploy this file on the server which runs Tomcat 5.5.7,it throws this error:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 20 in the jsp file: /abc.jsp
Generated servlet error:
Type mismatch: cannot convert from Long to Long
Can anyone of you,tell me where i am going wrong???Here is an example of doing it with a JavaBean... the bean looks like this:
package net.thelukes.steven;
import java.io.Serializable;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
public class FormHandlerBean implements Serializable {
private static final long serialVersionUID = 1L;
private Date startTime = null;
private DateFormat dateFormatter;
public FormHandlerBean() {
setDateFormat("yyyy-MM-dd hh:mm:ss");
public void setStart(String strt) {
setStartAsString(strt);
private void setStartAsString(String strt) {
setStartAsDate(getDate(strt));
private void setStartAsDate(Date d) {
startTime = d;
private Date getDate(String s) {
Date d = null;
try {
d = dateFormatter.parse(s);
} catch (ParseException pe) {
System.err.print("Error Parsing Date for "+s);
System.err.println(". Using default date (right now)");
pe.printStackTrace(System.err);
d = new Date();
return d;
public long getStartAsLong() {
return getStart().getTime();
public String getStartAsString() {
return Long.toString(getStartAsLong());
public Date getStart() {
return startTime;
public void setDateFormat(String format) {
dateFormatter = new SimpleDateFormat(format);
}You would only need to make the getStartXXX methods public that need to be accessed from the JSP. For example, if you will not need to get the Long value of the time, then you do not need to make getStartAsLong public...
The JSP looks like this:
<html>
<head>
<title>I got the Form</title>
</head>
<body>
<h3>The Output</h3>
<jsp:useBean class="net.thelukes.steven.FormHandlerBean" id="formHandler"/>
<%
formHandler.setStart(request.getParameter("start"));
%>
<table>
<tr><td>Start as String</td><td><jsp:getProperty name="formHandler" property="startAsString"/></td></tr>
<tr><td>Start as Date</td><td><jsp:getProperty name="formHandler" property="start"/></td></tr>
<tr><td>Start as long</td><td><jsp:getProperty name="formHandler" property="startAsLong"/></td></tr>
</table>
</body>
</html>If this were a servlet processing the form rather than a JSP, I might throw the ParseException that might occur in getDate and catch it in the Servlet, with which I could then forward back to the form telling the user they entered mis-formatted text value... But since JSPs should be mainly display, I catch the exception internally in the Bean and assign a safe value... -
Upgrade Photoshop from CS2 to CS3 in Macintosh
I am currently using Photoshop CS2 Mac version and DO NOT have CS3 beta version installed. I have couple installation questions whose answers are hard to find anywhere else, hope I can find them from this forum.
Since I heard a lot of troubles regarding upgrading PS from CS2 to CS3 if there is CS3 beta version already installed in Mac, I am a little be nervous. Here is my questions:
1. Can CS2 and CS3 co-exist?
2. Do I have to manually uninstalled CS2 prior to upgrading? If yes, how do I do it? I am assuming that CS3 upgrade should have a program to uninstall previous versions of PS, am I correct?
3. How do I deal with my current registration?
4. I have third-party plug-ins such as OnOne Mask Pro 4.0, nik Color Efex Pro 2.0 installed in CS2. What's the right procedure I should take to avoid their re-installation?
5. I also have Lightroom installed now, will CS3 upgrade affect it? Do I need to take any action?
Thank you very for help!
Regards,
HowardPatrick,
Welcome to the Macintosh. Glad the transition has worked well for you. A few quick points, here:
1. Download the combo update to Mac OS X 10.4.11 from the Apple site.
2. Any software that came from the previous owner must be Apple software that is included with the operating system; or, if other Apple or third party software (including Adobe or Microsoft), it must have a valid license that has been transfered to your name and you must have all discs. Otherwise, it must be deleted in order for you to be legal.
3. The best current utilities for maintaining and optimizing your computer include: Apple's own Disk Utility (on your Mac OS system disc); Alsoft DiskWarrior; and Maintain Cocktail. Other very good tools include: Roxio Toast (for disc burning); SuperDuper! (for complete system backups); and FontAgentPro (for organizing and maintaining large numbers of fonts). Whether you just print family snapshots or you do four-color commercial printing, you need to calibrate your monitor. Look into the Spyder3 or EyeOne calibrators.
Also note that it is important to repair permissions and run DiskWarrior when you install or upgrade any software on your system. As the specifics of these have been detailed numerous times in this forum, I recommend that you do a forum search for the details.
4. If you already have installed CS2, then you only need to purchase the upgrade version of CS3.
I hope this helps!
Neil -
Overflow when converting from "1.64174e+11"
Hi ,
I am working on PS module and facing the above mentioned error.Whenever I am attching any material haveing value more than Rs 100000 the system gives "Overflow when converting from "1.64174e+11""
The detailed error description is given below,
Runtime Errors CONVT_OVERFLOW
Except. CX_SY_CONVERSION_OVERFLOW
Date and Time 24.11.2008 11:19:23
Short dump has not been completely stored (too big)
Short text
Overflow when converting from "1.64174e+11"
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPFV45P" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "KALKULATIONSWERT_UEBERNEHMEN" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "1.64174e+11", an overflow occurred.
Missing RAISING Clause in Interface
Program SAPFV45P
Include FV45PF0K_KALKULATIONSWERT_UEBE
Row 8
Module type (FORM)
Module Name KALKULATIONSWERT_UEBERNEHMEN
Trigger Location of Exception
Program SAPFV45P
Include FV45PF0K_KALKULATIONSWERT_UEBE
Row 140
Module type (FORM)
Module Name KALKULATIONSWERT_UEBERNEHMEN
Source Code Extract
Line SourceCde
110 MTCOM-MATNR = VBAP-MATNR.
111 MTCOM-BWTAR = VBAP-BWTAR.
112 CALL FUNCTION 'MATERIAL_READ'
113 EXPORTING
114 SCHLUESSEL = MTCOM
115 IMPORTING
116 MATDATEN = MBEW
117 EXCEPTIONS
118 ERROR_MESSAGE = 04
119 OTHERS = 04.
120 MOVE SY-SUBRC TO SAV_SUBRC.
121 ENDIF.
122
123 IF T685A-KRECH = 'C'.
124 IF SAV_SUBRC = 0 AND MBEW-PEINH NE 0.
125 KOMV-KPEIN = MBEW-PEINH.
126 ELSE.
127 KOMV-KPEIN = 1.
128 ENDIF.
129 * Falls keine ET da, Zielmenge nehmen (Gut-/Lastschrift, Kontrakt ...)
130 DATA: DA_MENGE LIKE VBAP-KWMENG.
131 IF TVAP-ETERL EQ SPACE AND VBAP-KWMENG = 0.
132 DA_MENGE = VBAP-ZMENG.
133 ELSE.
134 DA_MENGE = VBAP-KWMENG.
135 ENDIF.
136 IF DA_MENGE > 0.
137 DA_WERT = DA_WERT * KOMV-KPEIN * 1000
138 / DA_MENGE * VBAP-UMVKN / VBAP-UMVKZ.
139 ENDIF.
>>>>> KOMV-KBETR = DA_WERT.
141 ELSEIF T685A-KRECH = 'B'.
142 KOMV-KBETR = DA_WERT.
143 ELSE.
144 KOMV-KWERT = DA_WERT.
145 ENDIF.
146
147 KOMV-WAERS = DA_KALKO-FWAER.
148 RV45A-KOEIN = DA_KALKO-FWAER.
149 KOMV-KMEIN = VBAP-MEINS.
150 PERFORM KOMV_PRUEFEN USING SPACE
151 CHANGING SY-SUBRC.
152 * Nur für den ersten Lauf prüfen, ob Status gesetzt werden muß
153 IF SAV_INDEX = 1.
154 DA_SUBRC = SY-SUBRC.
155 ENDIF.
156 IF SY-SUBRC = 0.
157 PERFORM KOMV_BEARBEITEN.
158 ENDIF.
159 ENDDO.
Pl suggest.
RgdsHi,
Try to declare your variable using Packed Number:
DATA: va_num TYPE P DECIMALS 3.
Hope this helps.
Patrick -
Upgrade from CS2 to CS3? (for Windows XP)
Hi, guys. I'm new here. And I only signed up for the forums so I could ask someone for help!! Haha! So, here goes......
I recently started using Adobe CS2.
I signed up for the 30 day trial of RadLab by Totally Rad. It worked fine, but my trial expired before I could finish the photos I had been editing. So I uninstalled the RadLab trial, signed up for a new trial with a different e-mail address, and re-installed it. Only, this time, RadLab wouldn't work. So I contacted Totally Rad and the guy told me that RadLab won't work on CS2. It has to be CS3 or higher. (I'm still confused as to how RadLab worked for 30 days on my CS2 if it supposedly only works on CS3 or higher)...
So, now, I am looking to upgrade from CS2 to CS3... but I don't know where to look. I tried Google, but nothing seems to match what I'm looking for. I would hate to upgrade all the way up to CS5, because I don't think my PC could handle it. (I've been told that CS5 takes up a lot of room, and I don't think my computer is strong enough to hold it all. My memory capabilities are very limited. Even with CS2, I couldn't open/edit much all at once.)
I say all that, to ask this...
How do I go about upgrading from CS2 to CS3, and it not cost me an arm and a leg? I'm on a super-tight budget ($150 is the absolute highest I'm willing to go). I'm unemployed and money is extremely tight.
Thank you in advance for your help!!Countrydust73 wrote:
I signed up for the 30 day trial of RadLab by Totally Rad. It worked fine, but my trial expired before I could finish the photos I had been editing. So I uninstalled the RadLab trial, signed up for a new trial with a different e-mail address, and re-installed it.
I don't want to burst your bubble about using Photoshop CS3, but I would expect any software with good trialware security to not work twice on the same system no matter whether you sign up with a different eMail address. They'd be stupid not to have it work that way.
If you need the software to get your project done, why not actually buy it?
You're no doubt expecting to derive value from your project... Shouldn't the people who worked to create the software you're using derive some value from their work as well?
I can appreciate your being on a budget, but the old saying "if you want to play you have to pay" comes to mind. I'm sorry to be blunt.
-Noel -
Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
Depending on the system version, and Office Word version:
- a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
- other kind of links where the text under display is not a URL, never work!
I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student -
How do I maintain column formatting when converting from PDF to Excel?
How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.
Sara,
Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing.
Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription. -
When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe. -
Moving Scriptlet Code to backing bean when converting from JSP - Facelets
Hello!
We are converting our application from jsf1.2 to 2.0 and all jsps are being converted to XHTML. Some are trivial while others had very complex scriptlets.
I would like to know what are some of the recommended ways of moving Scriptlet Code to backing bean when converting from JSP -> Facelets.
I have thought about listeners, actionListeners, putting code getXXXX() of the backing bean and then calling #{bean.XXXX} but not sure whats the best way.
I do appreciate the response!
Eg of a jsp page:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="/WEB-INF/xxx-jsf.tld" prefix="l" %>
<%@ taglib uri="/WEB-INF/yyy-pp.tld" prefix="p" %>
<%@ page import="com.ttyy.search.beans.jsf.AdvancedSearchFormManagedBean" %>
<%@ page import="com.kkee.util.*"%>
<%
AdvancedSearchFormManagedBean advancedSearchFormManagedBean = (AdvancedSearchFormManagedBean) request.getSession().getAttribute("AdvancedSearchFormManagedBean");
if (advancedSearchFormManagedBean == null) {
advancedSearchFormManagedBean = new AdvancedSearchFormManagedBean();
request.getSession().setAttribute("AdvancedSearchFormManagedBean", advancedSearchFormManagedBean);
advancedSearchFormManagedBean.initializeForAdvancedSearchOptions();
advancedSearchFormManagedBean.setQuickSearch();
request.setAttribute("portletHeader", "Hello " + advancedSearchFormManagedBean.getPerson().getFirstname() + ", check out the latest programs in your practice areas and jurisdictions");
%>
<h:form id="MYCenterForm">
<p:portletRenderer portletSetName="test of portlet"
portletContainer="#{PortletContainerManagedBean}"
id="MYCenter"
portletScope = "TEST_SCOPE"
suppressIfNoData="true"
portletSkinName="SOME_SKIN">
<f:facet name="persistenceToolkit">
<h:commandLink id="persistenceToolkitLink"
actionListener="#{PortletContainerManagedBean.persistPortletSetStateListener}">
<h:outputText value="Save State Of Portlet Set" id="persistenceToolkitLinkText"/>
</h:commandLink>
</f:facet>
</p:pagePortletSetRenderer>
</h:form>
<%
String flag = PropertyItems.getInstance().getPropertyItem("response.time.flag");
if("1".equals(flag)){
ResponseTime rt = (ResponseTime) session.getAttribute("responseTime");
if(rt!=null){
rt.setDesc("my cle loaded");
long now = System.currentTimeMillis();
long start = rt.getStart() + rt.getTotal();
rt.setInterval(now-start);
rt.setTotal(rt.getTotal()+rt.getInterval());
LogUtil.log(rt.toString(), LogUtil.DEBUG_LEVEL);
session.setAttribute("responseTime", rt);
%>That helps.
This could be another topic question but itst kind of related to what i am doing right now. while converting JSP to facelet (in jsf2) I came across another issue.
<h:commandLink id="Save" rendered="#{RegistrationBean.isNOTInOrigionalRegistrationMode}" action="#{RegistrationBean.updateProfile2Submit}" styleClass="#{portalSkinManagedBean.contentPortletSkin.strongTextStyle}">
<l:htmlSkinnedImage id="SaveImage" style="border:0;" url="save.gif" alt="Save Information"/>
</h:commandLink>When I click on the generated link, I get this. And this is happening for all the h:commandLink in the application.
http://localhost:9080/registration/updateProfile2.jsf[request.getQueryString()=null][request.getRequestedSessionId()=F1CCE237DD81D301F1C4DBA6910FFD8A][request.isRequestedSessionIdFromCookie()=true][request.isRequestedSessionIdFromURL()=false][request.isRequestedSessionIdValid()=true]Parameters:[rolePracticeAreasForm:title=rolePracticeAreasForm:primaryPracticeArea=10002javax.faces.ViewState=-2943345291093118815:-4400303399130292206rolePracticeAreasForm:practiceAreasMod2=10148.1rolePracticeAreasForm:practiceAreasMod1=10002.1rolePracticeAreasForm:Save=rolePracticeAreasForm:SaverolePracticeAreasForm=rolePracticeAreasFormrolePracticeAreasForm:otherField=rolePracticeAreasForm:fromMyAccount=1]||
javax.servlet.ServletException: Index: 0, Size: 0
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:325)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.legaledcenter.util.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:250)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:198)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.jscape.framework.galileo.support.upload.UploadFilter.doFilter(UploadFilter.java:71)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161)
at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427)
at com.sun.faces.application.view.StateHolderSaver.restore(StateHolderSaver.java:121)
at com.sun.faces.application.view.StateManagementStrategyImpl$4.invokeContextCallback(StateManagementStrategyImpl.java:289)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1253)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:284)
at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177)
at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:119)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:434)
at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143)
at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199)
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
... 22 more
********** Message End *************Thanks -
Overflow when converting from "3.60001e+11"
Hi Guys,
I'm Working with my PO using MIRO, I don't know why the error occurs. I've used the SAP Version 620 but end up with an error, then used Version 710 and successfuly created the transaction, but I'm stacked with version 620. I'm not allowed to transact it using the Version 710 that's why im looking for a patch or upgrade within 620 that i can use so that it can be solve.
I'm in need of your help guys. I know there someone out there that can help me.
THE ERROR
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Occurred on 03/28/2011 at 01:00:47
Overflow when converting from "3.60001e+11"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CONVERSION_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"DISTRIBUTE_ACC_ASSIGN_RE" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to convert the value "3.60001e+11",
an overflow occurred.
How to correct the error
The exception must either be prevented, caught within the procedure
"DISTRIBUTE_ACC_ASSIGN_RE"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:I won't post here if i already got the answer in SAP notes. I've spent 3 days searching for the answer. The only answer i got is the upgrade but can't be consider. OSS notes didn't provide me any answer. Hope u can help me
Edited by: docgon on Mar 30, 2011 2:38 AM -
Upload maxdb really needed? - Overflow when converting from 32768
hello,
I am facing with a run time error that does not make sense when uploading maxdb database. The error is: "Overflow when converting from 32768".
I am following this configuration tutorial:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm
Anyway, is there a need to upload this database? We installed netweaver mobile with SQL server database.
Help please.
Thanks.
Edited by: João Carneiro on Feb 8, 2011 2:10 PMHi,
Uploading MAXDB is not mandatory. It is needed only when multiple devices need to be installed with MAXDB through setup or software packages, which helps administrator to roll out multiple devices, so that end users will get all the necessary software to install the device.
Hope this clarifies your query.
Thanks and Regards,
Suma -
Grainy Image when converting from PAL to NTSC...
Hi,
I'm using Compressor 2.0.1 to convert a PAL movie to NTSC. I find that the output is extremely Grainy, the blacs are Muddy and the Highlights are colored.
Any suggestions?
Thanks and Regards,
RajneshThere are many options when converting from PAL to NTSC with Compressor's Frame Controls panel. Have you tried other settings? Note, however, that the highest quality settings are pretty slow so be prepared for a fairly long wait even on your Power Mac G5.
Otherwise, you might want to try the freeware utility JES Deinterlacer (available on VersionTracker.com). JES Deinterlacer is pretty fast at PAL <-> NTSC conversion and the results are better than you will get with the basic settings in Compressor 2.
Maybe you are looking for
-
Something happened with Firefox where all that comes up when I open Firefox are my toolbars and a place to enter a URL, but there is no window. I have to enter full screen mode to view websites. How do I get back to a regular browsing window? I have
-
Better management of multiple accounts on Mail.app
When using multiple accounts on Mail.app, it is possible to have different colors for each account, so that it is easier to avoid sending email from the wrong account?
-
how do i change the language of my keyboard and autocorrect to write a text in spanish using the pages app?
-
Windows XP computers can't see Airport via Ethernet connection
I have a iMac G5 hooked up to a new Airport Extreme base station. I have two other old Apples with which Airport Express Setup 4.0 doesn't work. Therefore, I am trying to set up my two Airports using a Windows computer so that they can be used as rem
-
How do I get Address Book to my email address book?
I made a new group in my address book. I think I did it correctly. I entered each name under contacts, made the group then dragged the names into the group. They don't look right in there...it is not just a list but shows the names like they are in