... type standered table ...
Hi All,
Can anybody explain me abt , wat 'standered table of ' means in the below sentence..
TYPES: B is defined here.
DATA: A TYPE STANDERED TABLE OF B.
Thankx
Hi Sal,
Check this.
TABKIND - Internal Table Types
Alternatives:
1. STANDARD TABLE
2. SORTED TABLE
3. HASHED TABLE
4. INDEX TABLE
5. ANY TABLE
Effect
The table type - set in the DATA, TYPES, orCREATE DATA statement, specifies how the system accesses entries in the internal table in generic key operations.
(READ TABLE itab, DELETE TABLE itab, INSERT TABLE itab, MODIFY TABLE itab, COLLECT itab). As a general rule, the runtime required for key operations depends on the total length of the key.
The various table types have the following hierarchy:
ANY TABLE
|
| |
INDEX TABLE HASHED TABLE
|
| |
STANDARD TABLE SORTED TABLE
Alternative 1
STANDARD TABLE
Effect
Defines the table as a standard table. Key access to a standard table uses a linear search. This means that the timne required for a search is in linear relation to the number of table entries.
You should use index operations to access standard tables.
For the sake of compatibility, you can use TABLE as a synonym of STANDARD TABLE.
Alternative 2
SORTED TABLE
Effect
Defines the table as one that is always saved correctly sorted. Key access to a sorted table uses a binary key. If the key is not unique, the system takes the entry with the lowest index. The runtime required for key access is logarithmically related to the number of table entries.
You can also access sorted tables by index operations. When you insert using an index, the system checks to ensure that the sort sequence has been correctly maintained. For this reason, it takes longer than inserting entries in a standard table. As a rule, you should only access sorted tables using their key.
Alternative 3
HASHED TABLE
Effect
Defines the table as one that is managed with an internal hash procedure. You can imagine a hashed table as a set, whose elements you can address using their unique key. Unlike standard and sorted tables, you cannot access hash tables using an index. All entries in the table must have a unique key. Access time using the key is constant, regardless of the number of table entries.
You can only access a hashed table using the generic key operations or other generic operations ( SORT, LOOP, and so on). Explicit or implicit index operations (such as LOOP ... FROM oe INSERT itab within a LOOP) are not allowed.
Alternative 4
INDEX TABLE
Effect
Standard and sorted tables belong to the generic class index tables. An index table is one that you can access using an index. You can currently only use the table type INDEX TABLE to specify the type of generic parameters in a FORM or a FUNCTION. Hashed tables are not index tables, and cannot therefore be passed to parameters defined as INDEX TABLE.
Alternative 5
ANY TABLE
Effect
Like INDEX TABLE, you use ANY TABLE to specify the type of any generic table parameter. The set of permitted operations for a table with type ANY TABLE consists of the intersection of all permitted operations for STANDARD, SORTED and HASHED TABLEs, and so is identical to the set of operations permitted for hashed tables.
Note in particular that you cannot use index access for tables with this type.
Reward If Useful.
Regards,
Chitra
Similar Messages
-
How many types of tables exists and what are they in data dictionary?
hi,
How many types of tables exists and what are they in data dictionary?
regards.Hello Liu,
Please search in forum before posting any question .
anyhow check the below link :
http://web.mit.edu/sapr3/dev/sap_table_types.htm
Thanks
Seshu -
What are the differnet type of tables in mdm ?
hi experts i am new to mdm. just i have refered some documents in that the have created some table and fileds ,taxnomy,lokups,.......
so can any one give me the bref ida on
what is mdm ?
what are the different type of tables in mdm ? What is the requirement for the selection of table?
what is a feld ? what are the diff type of fealds in mdm ? And requriement ?
what is taxnomay ? And Requriement or where or when we can use ?
what is lookups in mdm ? what is lookup tables in mdm ?
what is mdm console ?
what is mdm data manager. ?
what is mdm import manager ?
what is mdm syndicator ?
please any body answer this questions .Hello Praveen,
Below are the the all possible links of books,articles... etc for MDM.
http://hosteddocs.ittoolbox.com/RD021507b.pdf
demo
http://www.sap.com/community/int/innovation/esoa/demo/MDM_demo/index.html
http://www.asug.com/DesktopModules/Bring2mind/DMX/Download.aspx?TabId=66&DMXModule=370&Command=Core_Download&EntryId=3431&PortalId=0
MDM
http://www.asug.com/DesktopModules/Bring2mind/DMX/Download.aspx?TabId=66&DMXModule=370&Command=Core_Download&EntryId=1666&PortalId=0
SAP Netweaver MDM Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09b548d-7316-2a10-1fbb-894c838d8079
SAP NETWEAVER MDM Leverage MDM in ERP Environments - An Evolutionary Approach -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4059f477-7316-2a10-5fa1-88417f98ca93
Master Data Management architecture patterns
http://www-128.ibm.com/developerworks/db2/library/techarticle/dm-0703sauter/
MDM and Enterprise SOA
http://www.saplounge.be/Files/media/pdf/Lagae---MDM-and-Enterprise-SOA2007.10.10.pdf
Effective Hierarchy Management Using SAP NetWeaver MDM for Retail
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ee0c9e-29a8-2910-8d93-ad34ec8af09b
MDM World
http://mdm.sitacorp.com/
MDM: Master Data for Global business
http://www.sitacorp.com/mdm.html
MDM Master Data Management Hub Architecture
http://blogs.msdn.com/rogerwolterblog/archive/2007/01/02/mdm-master-data-management-hub-architecture.aspx
Improve Efficiency and Data Governance with SAP NetWeaver MDM
http://www.sapnetweavermagazine.com/archive/Volume_03_(2007)/Issue_02_(Spring)/v3i2a12.cfm?session=
Data Modeling i MDM
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-31279471c9758576df
SRM-MDM Catalog
http://help.sap.com/saphelp_srmmdm10/helpdata/en/44/ec6f42f6e341aae10000000a114a6b/frameset.htm
http://events.techtarget.com/mdm-ent/?Offer=DMwn716mdm
http://viewer.bitpipe.com/viewer/viewDocument.do?accessId=6721869
http://searchdatamanagement.bitpipe.com/data/search?site=sdmgt&cr=bpres&cg=VENDOR&sp=site_abbrev%Asdmgt&cp=bpres&st=1&qt=MasterDataManagement
http://viewer.bitpipe.com/viewer/viewDocument.do?accessId=6721819
http://www.dmreview.com/channels/master_data_management.html
http://searchdatamanagement.techtarget.com/originalContent/0,289142,sid91_gci1287620,00.html?bucket=NEWS&topic=307330
MDM Console -- http://help.sap.com/saphelp_mdmgds55/helpdata/en/88/9f9c427055c66ae10000000a155106/frameset.htm
MDM Import manager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/120367f94c3e92e10000000a1553f6/frameset.htm
MDM DataManager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
MDM Syndicator --http://help.sap.com/saphelp_mdmgds55/helpdata/EN/43/5fe0e8a55f5f6be10000000a1553f6/frameset.htm
Rgds
Ankit -
How to create a Attribute "Type standard table OF" to a OSS NOTE
Dear experts,
I need to add new attributes in a standard class as per one OSS note. I took access key to add new attributes. I have a question.
class name: CL_J_1BEFD
Attribute: MT_GROUP_C350
Level: Instance
Visibility: Private
Type STANDARD TABLE OF mty_result
How do i add the instance attribute because i do not want to give the typing and associated type, instead i have to declare data: MT_GROUP_C350 type standard table of mty_result in class builder private section code.
if you look at the pushbutton between Associated type and Description, for all instance attributes there's a green color lining below the arrow. I want my attribute also to be exactly same.
Though i have access key, in private section the display<->Change button is disabled.
Please suggest me how do i add code in private section of a standard class. i have required access key to change the class.
Thanks,
AlyssonHi Friend...
Thanks, but the question is...
When I went to transaction se24 or se80, I chose the class CL_J_1BEFD and second I swap to "CHANGE MODE".. after that the pushbutton is blocked... I can create the Attribute mt_group_c800 in the Class (using TYPE or LIKE option), but i can't change the code in the private session even using the assistant to modify it.
When I acess the Button "Detail View" the option "Direct Type Entry" is just unavaliable too, no matter what i do!
I coudn't find a way to create the Attibute like the note Describes (SAPNOTE NUMBER 1575772 - in the attachment of the note)
The changes are contained in the attachment
Follows the instructions retrieved from the file:
Add the following Attributes on the Class CL_J_1BEFD Private section
data:
mt_group_c800 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c850 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c860 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c890 TYPE STANDARD TABLE OF mty_result .
How can i make a way to creat this attributes using "TYPE STANDARD TABLE OF " Option? -
How to specify the type of table in the form parameters
How to specify the type of table in the form parameters. for example, how to specify the type of table "vacancies".
FORM getcertainday
USING
vacancies TYPE STANDARD TABLE
efirstday LIKE hrp9200-zfirst_day
lfristday LIKE hrp9200-zfirst_day.Hi
Are you asking about subroutine program to declare a variable for perform statement etc
if it so check this coding
DATA: NUM1 TYPE I,
NUM2 TYPE I,
SUM TYPE I.
NUM1 = 2. NUM2 = 4.
PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
NUM1 = 7. NUM2 = 11.
PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
FORM ADDIT
USING ADD_NUM1
ADD_NUM2
CHANGING ADD_SUM.
ADD_SUM = ADD_NUM1 + ADD_NUM2.
PERFORM OUT USING ADD_NUM1 ADD_NUM2 ADD_SUM.
ENDFORM.
FORM OUT
USING OUT_NUM1
OUT_NUM2
OUT_SUM.
WRITE: / 'Sum of', OUT_NUM1, 'and', OUT_NUM2, 'is', OUT_SUM.
ENDFORM.
If your issue is some other can u explain me clearly
Regards
Pavan -
Calling Oracle Stored proc with record type and table Type
I have a oracle SP which takes record type and table Type which are used for order management.
Is there anay way to populate parameters with these datatypes and call the stored procedure using ODP.NET?
Please help.
Thanks in advanceHi,
ODP supports associative arrays and REF Cursors. There is no support for PLSQL table of records.
Jenny -
How does a record type and table type works
Hi,
How a record type and table type work for the ref cursor,
below i m giving an example but its giving me errors
can any one help me for this?
declare
type empcurtyp is ref cursor;
type rectype is record (veid t.emp_id%type, vename t.ename%type);
TYPE tabtype IS TABLE OF rectype;
empcv empcurtyp;
vtab tabtype;
begin
open empcv for select emp_id,ename from t;
loop
fetch empcv into vtab;
exit when empcv%notfound;
dbms_output.put_line(vtab.vename||vtab.veid);
end loop;
close empcv;
end;
here we hav table t and i m taking only two fields of the table t which r emp_id and ename.Hi,
What errors are you getting with this? From experience you don't need a loop to put the records into the ref cursor its usually done on block.
HTHS
L :-) -
Problem in passing select-options to class meathods , type any table
<h1>how to pass type any table to class meathod</h1>
<h3>hi all
i'm trying to build class to validate the selection screen , like select-options and parameters
while writing meathod to validate the select-options
its throwing parameter mismath error</h3>
<h4>i tried like made import parameter in class meathod as 'TYPE ANY TABLE' and tried to pass select-options from my program it is saying type mismatch , how to overcome this problem </h4>
<h4>and i want to pass any select option , either of type lfa1-lifnr or mara-matnr or any other</h4>
Moderator message : Don't shout, use proper font size for explaining the question. This has been discussed in ABAP forums before. Search for available information. Thread locked.
Edited by: Vinod Kumar on Sep 14, 2011 11:20 AMhI
Triggering and Handling events
At the moment of implementation, a class defines its:
Instance events (using the EVENTS statement)
Static events (using the CLASS-EVENTS statement)
Classes or their instances that receive a message when an event is triggered at runtime and want to react to this event define event handler methods. Statement: METHODS
CLASS IC1_VEICHLE DEFINATION.
PUBLIC SECTION.
METHOD CONSTRUCTOR IMPORTING
EVENTS VEICHEL_CREATION.
ENDCLASS
CLASS LC1_VEICHLE IMPLIMENTATION.
METHOD CONSTRUCTOR
RAISE EVENT VEICHLE_CREATION.
REWARD IF USEFULL -
Modify Syntax on Internal table of type ANY TABLE
Hi,
I have declared one internal table which is of type ANY TABLE.
In the Loop statement, I am trying to Modify that Internal table from WA.
Then I am getting one Error message
"You cannot use explicit or implicit index operations on tables with types "HASHED TABLE" or "ANY TABLE". "C_T_DATA" has the type "ANY TABLE".
Above code I have placed in method of a corresponding Class.
Can u please advise me on this..How to modify the Intenal table .
Thanks and Regards,
K.Krishna Chaitanya.Hi Krishna,
the modify statement is obsolete.
You can always LOOP AT [itab] ASSIGNING <field-symbol>.
This makes the loop never slower, depending on the table structure faster or much faster.
If you know the table structure at run time, you can use a field-symbol of that type. If not, you can use a field-symbol TYPE any. Then you have to assign the components to field-symbol to modify them, i.e.
field-symbols:
<table_line> type any,
<matnr> type mara-matnr.
loop at itab assigning <table_line>.
assign component 'MATNR' of structure <table_line> to <matnr>.
clear <matnr>.
endloop.
This technique (available more than ten years) works incredibly fast. My estimate is that if SAP would change all the old standard programs that way and use it consequently in the new ones, the whole system would be 20 % faster because myriads of unnecessary copy operations of LOOP INTO would not happen.
Regards,
Clemens. -
What are the different types of tables in oracle --plz help
I want to know the different types of tables in orcle...Please help me
There are seven types of tables in Oracle.
1.Heap organized tables
2.Index organized tables
3.Index clustered tables
4.Hash clustered tables
5.Nested tables
6.Global temporary tables
7.Object tables
Source:http://www.adp-gmbh.ch/ora/concepts/tables.html
But if you are asking table types in the uses senses then they are n types :
1.Stage tables
2.Operational tables
3.Functional tables
4.Disposition tables
5.Archive tables
6.Other tables
Source:http://www.databasejournal.com/features/oracle/article.php/3616476/Types-of-Tables-in-Oracle.htm
And yes of course, the complete detail can be found in documentation.
HTH
Girish Sharma -
TYPE OR TABLE DEPENDENCY OF OBJECT TYPE (ORA-2303)
제품 : SQL*PLUS
작성날짜 : 2004-05-20
==================================================
TYPE OR TABLE DEPENDENCY OF OBJECT TYPE (ORA-2303)
==================================================
PURPOSE
Type이나 table의 dependency가 있는 type을 drop하거나 replace하고자
하면 ORA-02303 error가 난다. 이 error의 원인을 알아보도록 한다.
Explanation
Object의 attribute나 method를 수정하기 위해서는 object type을 drop하고 재생성
해야 한다. Type이나 table의 dependency가 있는 type을 drop하거나 replace하고자
하면 ORA-02303 error가 난다. Object type은 type (nested table 또는 VARRAY)
또는 object table로써 구체적으로 표현된다. 만약 data의 보존이 필요하다면
temporary table에 manual하게 옮겨놓아야 한다.
SQL Reference guide에 의하면 DROP TYPE FORCE 옵션은 recommend하지 않는다.
왜냐하면 이 옵션을 쓰게 되면 복구가 불가능하고 dependency가 있던 table들은
access하지 못하는 결과를 초래한다.
Example
아래의 query 1, 2, 3은 dependency을 확인하는 query문이다.
1. Find nested tables
select owner, parent_table_name, parent_table_column
from dba_nested_tables
where (table_type_owner, table_type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = '<typeOwner>'
and elem_type_name = '<typeName>');
2. Find VARRAYs
select owner, parent_table_name, parent_table_column
from dba_varrays
where (type_owner, type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = '<typeOwner>'
and elem_type_name = '<typeName');
3. Find object tables
select owner, table_name
from dba_object_tables
where table_type_owner = '<typeOwner>'
and table_type = '<typeName>'
and nested = 'NO';
Example ) Logon as Scott
/* Create an user defined object type */
SQL> create type object_type as object (
col1 number,
col2 varchar2(20))
Type created.
/* Create nested table type */
SQL> create type object_ntable as table of object_type
Type created.
/* Create varray type*/
SQL> create type object_varray as varray(5) of object_type
Type created.
/* Create parent table with nested table and varray */
SQL> create table master (
col1 number primary key,
col2_list object_ntable,
col3_list object_varray)
nested table col2_list store as master_col2
Table created.
/* Create object table */
SQL> create table object_table of object_type (col1 primary key)
object id primary key;
Table created.
ORA-2303 results if attempt to drop type with dependencies
SQL> drop type object_type;
drop type object_type
ERROR at line 1:
ORA-02303: cannot drop or replace a type with type or table dependents
위의 queery 1,2,3을 이용하여 object type dependency을 확인한다.
-- Find nested tables utilizing object type
SQL> select owner, parent_table_name, parent_table_column
from dba_nested_tables
where (table_type_owner, table_type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = 'SCOTT'
and elem_type_name = 'OBJECT_TYPE');
OWNER PARENT_TABLE_NAME PARENT_TABLE_COLUMN
SCOTT MASTER COL2_LIST
-- Find VARRAYs utilizing object type
SQL> select owner, parent_table_name, parent_table_column
from dba_varrays
where (type_owner, type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = 'SCOTT'
and elem_type_name = 'OBJECT_TYPE');
OWNER PARENT_TABLE_NAME PARENT_TABLE_COLUMN
SCOTT MASTER COL3_LIST
-- Find object tables
SQL> select owner, table_name
from dba_object_tables
where table_type_owner = 'SCOTT'
and table_type = 'OBJECT_TYPE'
and nested = 'NO';
OWNER TABLE_NAME
SCOTT OBJECT_TABLE
참고)
bulletin : 11576 처럼 utility을 이용하는 방법이 있다.
우리는 여기서 주의하여야 할 것은 script $ORACLE_HOME/rdbms/admin/utldtree.sql
을 내가 보고자 하는 user에서 돌려야 한다는 것이다.
$sqlplus scott/tiger
SQL> @$ORACLE_HOME/rdbms/admin/utldtree.sql
SQL> exec deptree_fill('TYPE','SCOTT','OBJECT_TYPE');
PL/SQL procedure successfully completed.
SQL> select * from ideptree;
DEPENDENCIES
TYPE SCOTT.OBJECT_TYPE
TYPE SCOTT.OBJECT_NTABLE
TABLE SCOTT.MASTER
TYPE SCOTT.OBJECT_VARRAY
TABLE SCOTT.MASTER
TABLE SCOTT.MASTER_COL2
TABLE SCOTT.OBJECT_TABLE
Reference Documents
Korean bulletin : 11576
<Note:69661.1>Hi Carsten,
Thanks for the sharp hint. It works.
However, when I create a table using the schema, it gives me this error:
varray DOC."LISTOFASSIGNEDNUMBER"."ASSIGNEDNUMBER"
ERROR at line 14:
ORA-02337: not an object type column
Here is the script:
CREATE TABLE CUSTOMMANIFEST (
ID NUMBER PRIMARY KEY,
DOC sys.XMLTYPE
xmltype column doc
XMLSCHEMA "http://www.abc.com/cm.xsd"
element "CustomManifest"
varray DOC."LISTOFMANIFESTPORTINFO"."MANIFESTPORTINFO"
store as table MANIFESTPORTINFO_TABLE
(primary key (NESTED_TABLE_ID, ARRAY_INDEX))
organization index overflow
varray DOC."LISTOFASSIGNEDNUMBER"."ASSIGNEDNUMBER"
store as table ASSIGNEDNUMBER_TABLE
(primary key (NESTED_TABLE_ID, ARRAY_INDEX))
organization index overflow
LISTOFASSIGNEDNUMBER itself is complexType and not sure where is the error....
You may note there are more than two hierachy/levels...
Thanks. -
Exporting Parameter of type 'INDEX TABLE'
Hi Experts,
there is a standard method CL_CRM_MKTPL_OL_TRADE->GET_TRADESPENDS in CRM which has an exporting parameter ET_TRADESPENDS of type INDEX TABLE. Could somebody give me a hint on how to call this method and work with the data that is returned? I am assuming that I will need field symbols for this, correct? Coding examples would be greatly appreciated.
Thanks,
JensHi Jens,
INDEX TABLE is a generic type. The data object expected depends on configuration and/or context. As we don't have any CRM system I can check CL_CRM_MKTPL_OL_TRADE->GET_TRADESPENDS I can't give you the details.
I have some experience with comparable methods in SAP Transportation Managament which uses the BOPF framework. In program context, we know what type of table structure will be expected, so we defined a local table accordingly and passed it to the ET parameter.
If you don't have any idea on how to find out, just declare any internal table, i.e-lt_test type table of string. Then call the method with parameter ET_TRADESPENDS = lt_test. This will dump for sure. Enter debugger and check what kind of data are returned. From the field names you may get a clue what structure it could be. Dump analysis may also provide some info.
Regards,
Clemens -
How to define complex type with table per record?
Hi,
for one of my tasks I'm dealing with XML export. After short investigation of the postings in the forum I found an acceptable solution:
Re: Convert ABAP to XML and Vice versa
The issue is that I need an XML file like this:
<plant>
<material>
<purchases>data</purchases>
<purchases>data</purchases>
<purchases>data</purchases>
<sales>data</sales>
<sales>data</sales>
<sales>data</sales>
</material>
<next material>
</next material>
</plant>
So here are the questions:
1. Is it possible (and how) to define such deep structured type where for each record (means material) there is at least 1 internal table connected to that record? That would let me use a record-2-DOM conversion and a standard DOM-2-XML renderer.
2. Could anyone please provide a very simple and short example?
Of course, I could write my own XML renderer and achieve what I need (without using DOM, simply write to file all the desired XML tags while looping at my *nested* tables), but if there is a way to define such a structured type and further to fill it with data, it would help me learn a little bit more about abap opportunities and would save me a bit more time to create a renderer.
Many thanks in advance.
Regards,
Ivaylo MutafchievHi,
You can declare deep structure as below
TYPES : BEGIN OF ty_address,
house(10) TYPE c,
street(10) TYPE c,
END OF ty_address.
TYPES : BEGIN OF ty_itab,
name(10) TYPE c,
age TYPE i,
address TYPE ty_address OCCURS 0,
END OF ty_itab.
DATA : i_address TYPE STANDARD TABLE OF ty_address,
i_itab TYPE STANDARD TABLE OF ty_itab.
DATA : wa_address TYPE ty_address,
wa_itab TYPE ty_itab.
CLEAR : wa_address,
wa_itab.
wa_address-house = 'House1'.
wa_address-street = 'Street1'.
APPEND wa_address TO i_address.
wa_address-house = 'House2'.
wa_address-street = 'Street2'.
APPEND wa_address TO i_address.
wa_itab-name = 'Test'.
wa_itab-age = 10.
wa_itab-address[] = i_address[].
APPEND wa_itab TO i_itab.
Also check structure BSPL_GRID_FIELDCAT field CELL_COLOR -
How to get type any table in function module... or something
Moderator message: Please use a more informative subject in future, and NOT IN ALL CAPITALS.
Hi experts,
how to get type any table option.
in source code.
*" CHANGING
*" REFERENCE(S_EKORG) TYPE ANY TABLE OPTIONAL
Thank you.
Edited by: Matt on Feb 17, 2009 2:27 PM - subject editedIn Function module...... Under changing tab, give the parameter name and type enter associated type any.... You would get that same in the source code and also choose Optional check box.....
You will see exact code in the FM source code -
Issue with new 'Display Summary Type in Table' Attribute
JHeadstart Version: 10.1.3.1.26
JDeveloper Version: 10.1.3.1
We have configured our top level groups in our JHS Application Definition Editor to have each table's first column (Primary Key) set to 'count' for the 'Display Summary Type In Table' field level attribute.
Our problem is that now that we have this handy counting functionality, we found that it breaks the row focus when entering data in a table-forum. To be precise, when typing in or modifying the field that contains the defined 'count' attribute, when we 'tab off' from that field the page seems to run some JavaScript (the recounting of the rows I presume) and loses the keyboard's focus from that row. This outright prevents users from tabbing to the next field to continue entering data - which is rather important for our application.
I am presuming that this is a bug. Any ideas on how to fix it?Erik, Michael,
I checked with ADF Faces development. I have a logged a bug for this against ADF Faces. Hopefully it will be solved in release 11.
There is nothing JHeadstart can do to fix this. Wherever we have autoSubmit=true generated on an item to get AJAX-style partial page requests (LOV item, summary item, depends on item), then tabbing out the field will loose the cursor, and pressing Save immediately after entering a value in the item will not save the data.
Steven Davelaar,
JHeadstart Team.
Maybe you are looking for
-
Hi Experts, i am now confused about these two stacks: Java Stack and ABAP Stack. for IR objects, like DT, MT, SI, MM, SM, Action, Process Integration Scenario for ID objects, like profile agreements, receiver determination, interface determination, 1
-
A function to insert SQL which creates insert SQL
I realise this is a bit recursive, but my users are a demanding lot! We want to store in a table the instruction to check if AUDIT_SYS_OPERATIONS is TRUE and to store the result of that check in some sort of an audit table. In other words, the basic
-
Add tempfile and has erorrs?
Hi all, I get the following errors and I add tempfile: SQL> alter tablespace temp add tempfile '/u01/uat/uatdata/temp02.dbf' size 500M 2 ; alter tablespace temp add tempfile '/u01/uat/uatdata/temp02.dbf' size 500M ERROR at line 1: ORA-01119: error in
-
Basic Doubts in Digital Signatures ES
1) Revocation Checking : i read that the certifications will be checked(to see whether it has been cancelled) by checking the CRLs list. Where can i find this list? 2) What is the concept behind Long Term Validity in Digital Signatures ES. Please hel
-
Why can't Weblogic 12c find Managed Bean by annotation,which in a jar?
the detail: why can't Weblogic 12c find Managed Bean by annotation,which in a jar?