Type the name and password of a user in the "(null)" group to allow this.

To connect to wifi while in the recovery partition, I'm asked to authenticate the wlan's certificate, and in order to do that I'm asked for "the name and password of a user in the "(null)" group" to make changes to the Certificate Trust Settings. Anyone know what or which user may this be?
I'm not able to pass from the initial apple screen when I boot, so I wanted to repair or reinstall Lion, but in order to do that I need to connet to the WLAN to download it.

Hi, I called Apple Support this day, and the answer is that enterprise WPA wireless is NOT supported by Lion Internet Recovery.
You can find the supported configurations and protocols on Apple site:
http://support.apple.com/kb/HT4718?viewlocale=en_US

Similar Messages

  • When ever i try to print it is asking me to type name and password of a user in print operator group to allow safari to make changes

    whats m

    Hi, I called Apple Support this day, and the answer is that enterprise WPA wireless is NOT supported by Lion Internet Recovery.
    You can find the supported configurations and protocols on Apple site:
    http://support.apple.com/kb/HT4718?viewlocale=en_US

  • LAN Networking / UUID error - "You may need to enter the name and password"

    I'm having an issue with networking via ethernet cable. I'm connecting to Windows Vista via ethernet from my macbook pro.
    Everything was going hunky dory until today when I connected and tried to copy a folder over from my desktop to a folder on my vista machine.
    The error is a three tier one, as follows:
    1. +"You may need to enter the name and password for an administrator on the computer to change the item name "..." - stop or continue"+
    2. +"The item "..." contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?" - stop or continue+
    3. +"The operation cannot be completed because you do not have sufficient privileges for some of the items."+
    This happens with all files and folders that I try to transfer over. I have full permissions on both ends to do this and the folders have full permissions.
    I've done a bit of trawling and have found out that if you goto: system prefs - accounts (click unlock) - right click on the user in question - advanced options, you can click on the "create new" button under UUID and create a new UUID digit, then restart. This works!!!!... But...
    ...it only works for a little while. After transferring a few folders or files accross, it comes up with the three tiered warning: "you may need to enter the name and... etc etc."
    This is really annoying.
    I've found my initial answers on this thread: http://discussions.apple.com/thread.jspa?threadID=1823835&tstart=45, but this issue seems to go one step further by constantly not allowing me access
    Has anyone got any thoughts about what I can do? I've also tried running applejack on startup, but this doens't work either...

    Actually I get some other errors as well:
    "You may need to enter the name and password..."
    Then I click continue...
    "The item "filename" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
    I click continue...
    "The operation cannot be completed because you do not have sufficient privileges for some of the items."
    I am copying a text file made from textedit. I have logged into the shared drive on my iMac. I get the same errors coying to my own user folder. Same account on both machines.
    But it does copy a blank version of the file to the drive and adds the .txt extension to it. Then I can delete it from the share.

  • ı have bought second hand ipad. 17 apps which were downloaded by previous user with his or her apple id. I need to update them but when I try, ı can't update them with my own apple id. Device ask me to update with the id and password of previous user.

    ı have bought second hand ipad. 17 apps which were downloaded by previous user with his or her apple id are waiting to be updated. I need to update them but when I try, ı can't update them with my own apple id. Device ask me to update with the id and password of previous user. I tried I forgot but this didn't work.  So how can ı have my device forget the previous ID and use my own to update exsisting apps.
    <Email Edited by Host>

    Restore the device to factory settings with iTunes. 
    Then launch the App Store app on the iPad and sign in with your Apple iD and password:
    OT

  • "You may need to enter the name and password for an admin" ....

    Hi everyone!
    I'm getting this error when trying to copy files over to a network drive. First, it'll pop up and say:
    "You may need to enter the name and password for an administrator on this computer to change the item named"
    At the same time, it will create an empty file on the target drive. When I click "Continue", it asks me for my username and password, which I happily enter. At that point, it errors out and says "The operation cannot be completed because an item with the name "xyz" already exists".
    I've tried repairing permissions, chmod 777'ing a file, etc. It did work for a short time (it seemed to work while I was at work, but once I arrived home, it quit working and hasn't worked since.) I've tried rebooting as well.
    Does anyone have any suggestions? I'm really puzzled over this!
    Thanks!

    Actually I get some other errors as well:
    "You may need to enter the name and password..."
    Then I click continue...
    "The item "filename" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
    I click continue...
    "The operation cannot be completed because you do not have sufficient privileges for some of the items."
    I am copying a text file made from textedit. I have logged into the shared drive on my iMac. I get the same errors coying to my own user folder. Same account on both machines.
    But it does copy a blank version of the file to the drive and adds the .txt extension to it. Then I can delete it from the share.

  • Directory Utility keeps telling me the name and password do not match

    Installed Leopard Server on my Mini a few days ago, and I enabled Open Directory server.
    Added the server in my home network with directory utility on my laptop, and it works perfect both when I'm on the local network, and when I'm elsewhere.
    Tried doing the same at my Leopard iMac at work today. Finds the server just fine, but when trying to configure my machine locally I get an error message during Authentication that simply says "The name and password you entered for the user account on the server do not match".
    Now. I KNOW the username and password is correct. And I have the same username and password on this machine (both the long name, and the short one).
    So what am I doing wrong here?

    Christian,
    I've experienced similar issue recently. The most likely solution will be to delete the user and recreate it using same uid and username. I'm going to look for other solutions prior to that.

  • "Cannot login. Make sure the name and password are correct."

    I've just created a new iAS6 SP4 instance on a new machine (new local LDAP, SPARC Solaris8). But when I startup a ksvradmin tool I get the msg: "Cannot login. Make sure the name and password are correct."... and I cannot access to admin my new instance :-(. I don't understand about what user and what pw it tell me. I did this instalaltion on other machine by the same way but without any problem. On my other machine I don't have to identificate me when I use the ksvradmin tool.

    Sorry I wasn't being very clear either.  I was assuming that you were trying to follow option 2 from Joe D's post on 3-24-2004.  Once you know what environment variables have changed you can go the control panel to set them.  Some of them will may be new variables that you will need to define.  Others may already exists in which case you want to append to them.
    The other option is as Joe D said, which is to run VCVARS32.bat before you start Xmath.  You could even make a batch file such that instead of starting xmath.bat directly you call your own batch file (.bat).  This batch file would have two lines.  One to run VCVARS32.bat and the second to run XMATH.bat.  If you are not familiar with batch files there are a lot of resources on the web about them.  In this case all you would need is:
    <path to vcvars32.bat>\vcvars32.bat
    "C:\Program Files\National Instruments\MATRIXx\bin\xmath.bat"  -v 71.6
    The -v 71.6 is optional.  it specifies to specifically open version 7.1.6.  If you leave it off the newest version will be opened.
    Carl L
    National Instruments

  • I have changed the name and password for my Time Capsule and now the Time Machine will not connect

    Mac Book Pro
    1TB Time Capsule.
    Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
    However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
    When I enter the time machine preferences it shows as below that there are no back ups.
    Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
    So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
    Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
    (And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

    Simply reset the Time Machine.
    See A4 here http://pondini.org/TM/Troubleshooting.html
    You can then mount the TC disk in finder after you reboot the computer.
    You should be able to reselect the TC disk and then it will say it is going to start a new backup.
    Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
    Please also install the widget A1 so you have some idea what TM is doing.

  • "You may need to enter the name and password for an administrator"

    I am suddenly getting this message when I try to copy a file from my new Macbookpro to my Powerbook running 10.4.9.
    "You may need to enter the name and password for an administrator on this computer to change the item named "file i am trying to transfer". stop continue
    I hit continue and get the error message: "The item "that I am transferring" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?
    I say continue and get the error: "The operation cannot be completed because you do not have sufficient priveleges for some of the items."
    My network was working fine until today. I can copy fine to all other computers on my network. But not this one.
    If I initiate a transfer from the Powerbook, everything works fine.
    Ideas?

    I experience the exact issue between a macbook pro and an iMac.
    I can access the files locally on my macbook, copy them on usb-stick, etc.
    but ... when I try to copy the files to my iMac ... it fails with the sequence of questions you mentioned.
    However!
    I can copy whatever I like from my macbook if I use my wifes account.
    So...
    Imho there is a problem when the SAME account is used on both systems.
    In my case, I copied my account from the macbook to the (new) iMac.
    Mac OS X seems to be confused when the same accounts are used.
    Does this makes sense?
    All help welcome.
    Luc

  • I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    Hello, do you have another admin account to log into for a test?

  • Help with "You may need to enter the name and password for an administrator

    I'm trying to move files from one of my external harddrives to another external harddrive. I keep getting this message "You may need to enter the name and password for an administrator on this computer to change the item named "Documents". I also get this for other folders I want to move, but not all folders on that drive.
    I am the administrator, and it only gives me an "ok" button, no option to enter my name and password again.
    Any ideas?

    I have the same problem, trying to copy items from external hard disk to another computer on the network. I can copy without problems from external hard disk to my laptop. But not from external hard disk to another computer on the network, and neither from my laptop to another computer on the network, but ONLY if the files I try to copy from my laptop were first copied from that external hard drive. It keeps popping me up with this message. Please help, or fix.

  • TS1702 When I try and use the Kindle app on my touch it keeps telling me to register the kindle. I register it using the account and password I used to get the app but it tells me there is no customer found for the email address and password. help

    When I try and use the Kindle app on my touch it keeps telling me to register the kindle. I register it using the account and password I used to get the app but it tells me there is no customer found for the email address and password. help

    No, it is asking you to register with your Amazon user id and password. Your Apple ID won't work.

  • HT1695 I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???

    I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???

    You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.

  • When I try installing Firefox 6.0 from the binary file, a box with "Run As" in the type field appears, which asks me for user name and password. Please advise about the course of action that I should take.

    Trying to run it as the current user, or as one from a different account(administrator in this case) also doesn't work.

    I think the client is not able to do a HTTP POST
    to the WLS server but it can do a HTTP GET.
    I dont know why.
    http://manojc.com
    "Ganesh" <[email protected]> wrote in message
    news:3eba91bc$[email protected]..
    >
    Hi,
    I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
    invoke the web service through my browser (IE 6.0) using the web servicesurl,
    it brings my service method correctly. From there, if I click the invokebutton
    it asks me for a network user name and password under "weblogic" realm???If I
    provide the admin user credentials (which I supplied while creating mydomain)
    it is not accepting that it keeps popping up this network user passwordwindow
    over and over. Not sure which username/password I have to provide here tosee
    the result of my service.
    If I try to invoke the web service through my client (static) I am gettinga connection
    refused exception. I guess either way, I am not able to access my webservice.
    In the attached file, I have cut and pasted the client stack trace as wellas
    the server log trace from weblogic.
    Any ideas would be highly appreciated.
    Thanks,
    Ganesh

  • HT204053 setting up my new ipad. under new account i cloud  imap where do i get by incomming mail server host,user name and password. will it also be the same infor for outgoing mail server

    setting up my new Ipad. Under icloud Incomming and outgoing server Where Do i get the host name,user name and password?

    It should setup email automatically when you enable it in your iCloud account.
    If not, here are the settings: http://support.apple.com/kb/HT4864

Maybe you are looking for

  • IPhone 5 texting in landscape mode

    Typing is fine in upright mode but, when the phone is in landscape, the texting becomes non-responsive.  I can get a few letters out in a sentence but it's clearly not working the way it should.  I'm pretty sure it's time to take it in but thought th

  • How to get average number of emails per day?

    Hi, I need figures on the mail activity (whether inbound ir outbound). I have implemented the imslog.pl. Does this output from imslog.pl answer my question: Message load by day (dequeues): Date # of dequeues 16-May-2006 8813 the # of dequeues is the

  • HT201363 my ipod no longer plays in my truck when on the computer it shows a lock on music

    my i pod quit playing in my truck and shows a lock on my music when hooked up to the computer

  • Configure PATH in Solaris 8

    Hello! I want to ask you how to add a new path in Solaris, because I wanna compile Ethereal source and it say that I don't have GLIB and GTK greater than 1.2.0... bulshit! I have version 1.2.10. Someone told me to add GLIB and GTK libraries path to o

  • How to use ServerSocket(int port, int backlog, InetAddress bindAddr)

    Hi all, For what we using bindAddr in this constructor, is it possible to give any IP for that argument (i know we can't), what are all the possible IP's we can give if our PC in a workgroup. One more thing when we need this type of constructor. Than