Type Tool CS6 Yosemite on Macbook Air

I am trying to run PSCS6 on a new macbook air i7 8G ram running Yosemite. Every time I pick the type tool it hangs and I have to force quit. All updates for PS are current. I have reset the preferences but does not seem to help. Any help would be greatly appreciated. Also, no menus under the tools are showing up.

Just spoke with support.... I named the "Adobe Photoshop CS6 Preferences" folder to Adobe Photoshop CS6 Preferences.old
and it worked! (my magnetic lasso was also very very slow... unusable but OK now).
Hope this helps.
Udit Tuli: On the desktop
Udit Tuli: click on go and then go to folder.
Udit Tuli: and type in ~/Library
Udit Tuli: and click on ok
Udit Tuli: and then look for preferences folder.
Udit Tuli: And look for Photoshop CS6 settings
Udit Tuli: Yes and rename that folder to cs6settings.old

Similar Messages

Yosemite on MacBook Air - Third time installed, now will not be startup disk. Disk Utility says OK. Disk Warrior says 375 pages of bad .plist files. How delete plist files?

Yosemite on MacBook Air - Third time installed, now will not be startup disk. Disk Utility says OK. Disk Warrior says 375 pages of bad .plist files. How delete plist files?
What does "Accessibility" mean?

Had the same problem, finally realized that the FileVault Encryption was struck at 19%. Speed back up to normal after I disabled FileVault using terminal command - sudo fdesetup diable
To check whether the FileVault is the culprit, go to System Preferences --> Security & Privacy --> FileVault to see if encryption is in progress.. For me the blue bar was less than a quarter with status 'estimating time remaining'..
Then open Terminal and type in: sudo fdesetup disable
It will then ask for the admin password (to be it asked twice), then it was disabled... Back to normal life again..
Here is my terminal log for reference:
Last login: Tue Oct 21 23:05:13 on console
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ sudo fdesetup disable
Password:
Enter a password for '/':
..fdes.
FileVault has been disabled.
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is Off.

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

Hi how do you type a hashtag on a macbook air???

hi how do you type a hashtag on a macbook air???

Open the International pane of System Preferences(this may be different in different Mac OS X versions), enable the keyboard viewer and the input menu, open the keyboard viewer, and hold down Option, Shift, or both, until you see a hashtag in the viewer.
(70250)

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

Have you tried changing the order in Network Preferences pane?
Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
Hope this helps
PJRS

After upgrade to yosemite my macbook air doesn't connect to iPhone 4s(version8.1).

after upgrade to yosemite my macbook air doesn't connect to iPhone 4s(version8.1) .it did connect once and thats it...theywork now as two different mac products as before upgrade. that advantage of connecting the mac products after upgrading to yosemite has not worked.

Hi netaanya,
Welcome to the Apple Support Communities!
Your iPhone 4s does work with Continuity, but only phone calls. Please refer to the attached article for more information.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Handoff is supported by the following iOS devices and requires iOS 8. Instant Hotspot requires one of these iPhone or iPad devices with cellular connectivity and iOS 8.1. Instant Hotspot also requires Personal Hotspot service through your carrier.
Phone 5 or later
iPhone 4s (sharing iPhone calls only)
iPad (4th generation), iPad Air, iPad Air 2
iPad mini, iPad mini with Retina display, iPad mini 3
iPod touch (5th generation)
Cheers,
Joe

Input/output error when installing CS6 on my MacBook Air 10.10 Yosemite

I have the CS6 disk and I keep getting input/output error when I try installing it on my new MacBook Air 10.10 with Yosemite.

sounds like you have a damaged cd.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Apple TV 2 choppy video playback when mirroring from Macbook Pro (Yosemite) and Macbook Air (Yosemite) but not iOS devices

Video playback is choppy (cuts out every 30-45 seconds) when air playing from both my MacBook Air 1.3 GHz Intel Core i5 running Yosemite and my husbands new MacBook Pro, but runs perfectly when mirroring from any of our iOS devices (iPhone 6+, iPad mini 3, etc.) We have Apple TV 2. This problem just started a few weeks ago, was working fine around Christmas. The problem seems to have coincidentally started right after our son tried plugging in and setting up his Chromecast on our tv. I disconnected the Chromecast, but we still have the problem. All of our software if up to date and I've tried disconnecting blue tooth, we do not have a microwave and our wifi network has a very strong signal. We have an Airport Extreme base station. Is there a solution to our problem?

Hi leahmturner,
I see that you are experiencing an issue with choppiness while AirPlay Mirroring from your computers to your Apple TV. I have an article that contains some helpful troubleshooting steps for you regarding this issue:
About AirPlay Mirroring in OS X - Apple Support
http://support.apple.com/en-us/HT201343
Optimizing image quality
Resolution matching modes
You can choose between two desktop resolution matching modes that let you select which display will have the best image. When AirPlay Mirroring is turned on, select an option under "Match Desktop Size To:" in the AirPlay Mirroring menu extra.
Match Desktop Size To: Apple TV
AirPlay Mirroring changes the desktop resolution to best match your Apple TV, resulting in a 16:9 image that fills the HDTV screen. This setting often produces the sharpest image on the HDTV. The aspect ratio and/or resolution of the built-in Mac display may change to accommodate the Apple TV.
Match Desktop Size To: This Mac
AirPlay Mirroring scales the contents of the desktop to fit on the Apple TV, leaving the resolution of your Mac's display unchanged. Use this setting for the sharpest image on your Mac's display. Depending on your Mac model, the resulting image may not fill the HDTV screen.
Troubleshooting AirPlay Mirroring
If you don't see mirroring options
If your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears, your Apple TV may be asleep. Simply press a button on your Apple TV remote to wake it up. After a few seconds, the AirPlay Mirroring menu extra appears. If you still don't see the options you expect, make sure your Apple TV has the current software update installed. Also make sure that you have the "Show mirroring options in the menu bar when available" option selected in the Displays pane of System Preferences.
If the menu bar or Dock is cropped
Some HDTVs have bezels that cover a small percentage of the screen. This can result in a slight cropping of a full-resolution HDTV image. Depending on the HDTV model, AirPlay Mirroring may automatically adjust the picture size to prevent cropping. If you are using OS X Mountain Lion or later, and you see cropping of the menu bar or Dock when using AirPlay Mirroring, toggle the Overscan correction option in Displays preferences.
Minimize video post-processing
HDTVs often apply picture quality enhancements intended to improve the look of film and video sources. In some cases, these enhancements can lead to over-sharpening artifacts when displaying your Mac desktop. Some HDTV models have built-in settings to change or disable the enhancements for use with a computer (computer, presentation, or game modes). Otherwise, the controls for sharpness, detail enhancement and noise reduction can be used to optimize the appearance of the Mac desktop. Consult your HDTV’s manual for guidance on the appropriate settings for use with a computer.
Firewall security settings
If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
Choose System Preferences from the Apple menu ().
Click Security & Privacy, then click Firewall.
Click the lock icon to unlock it if it's locked, then type an administrator name and password.
Click Firewall Options.
Deselect (uncheck) the “Block all incoming connections” checkbox.
Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HDCP display issue with Yosemite and Macbook air

Hi - Sorry if the question has been asked before and answered.
I have an issue where since I have upgraded to Yosemite, I cannot play any of the movies I bought prior to upgrading and I can even play trailer from the iTunes store...
Any ideas?
Thanks

Too bad this didn't help.
HDCP errors can also occur when your display settings are incorrect and when you have non-original / non-Apple display software installed. Think a special driver to support a specific type of external display, or a remote viewer application like TeamViewer or AirParrot.
If you're having the HDCP error with an external display, disconnect it and test with the MacBook Air's own display.
If the issue persists on the MacBook Air's own display:
To restore your display settings to factory default: do a PRAM reset:
http://support.apple.com/kb/PH14222?viewlocale=en_US
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.
Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
If you have special software installed, it would be best to try to boot the computer to safe mode:
http://support.apple.com/kb/PH18760
Choose Apple menu > Shut Down.
After your Mac shuts down, wait 10 seconds, then press the power button.
Immediately after you hear the startup tone, hold down the Shift key.
You should press the Shift key as soon as possible after you hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator.
If that doesn't solve it, peruse your Applications folder in the Finder and see if you can delete unwanted video / viewing-related applications.

Download CS6 onto NEW macbook air using previous SERIAL NUMBER i had before?

Hi there. I purchased photoshop cs6 for download for my macbook air in 2012. recently i broke my mac, losing everything i had on it. i'm wondering is there a way i can download cs6 again for my new mac,and use the valid serial number i had before. there doesn't seem to be an option to download cs6 on the adobe website anymore? any help would be much appreciated. i can't really afford to spend the €250+ again on a new version

Download from Download CS6 products
Install then enter your serial number.

Can't use ch340g serial port driver since upgrading to Yosemite on MacBook air

I use my MacBook air with the Arduino 1.0.6 IDE. Since upgrading ( free upgrade) to Yosemite. I can no longer acess the ch340g serial port. (does not show up in arduino ide). I tried re-installing the driver. I get no errors and am told the install was successful. This was working very nicely before the upgrade. I now have three boards I cannot use. I am at a loss as to what I should do. I suppose I could go back to Maverick but then I would have to go buy the operating system. This seems wrong to me. I was offered an upgrade that then leaves me up the creek without a paddle. Any help given would be highly appreciated.

I have the same problem, a non stable CM341 serial to tty driver on Yosemity on a MacbookPro Retina.
I followed the advice of Rsattaur, I executed the command: sudo nvram boot-args="kext-dev-mode=1" and now I have big problems with my USB-ports.
The result is a screen-of-death after connecting anything to my USB-ports!!!!
Harold

Yosemite on Macbook Air late 2013

Hi,
I have a MacBook air with 4GB of ram, 1.3ghz, and about 60-70GB of free space. I want to upgrade to Yosemite, as I like the look of the new features-however, I am quite concerned that it will really slow down my computer. Those with the same machine as myself, does Yosemite run well? I have read accounts of it being fantastic, and accounts of Mac's becoming unusable!
Any help would be appreciated!
Thank you!

1. Make a clone backup with Carbon Copy Cloner software.
Then try Yosemite.
Yosemite runs well on a Mac with 8GB RAM installed.
2. I see no problem with Yosemite here on this Mac.
Best.

I cannot type fourth pinyin on my macbook air

I needed to type some things in chinese and i needed to type pinyin. I figured out that I can type pinyin using 'US. Extended'. I bought my macbook air in japan and the keyboard is japanese version. now, I cannot type the fourth pinyin ` pressing option and shift at the same time.what should i do?

Try option + shift + _ . (bottom right corner key I think).

After installing Yosemite, my macbook air crashes every time it wakes from 'longish' sleep

I installed Yosemite. All seemed to be fine. But if my MacBook Air (mid 2012) goes to sleep due to inactivity (or if I close the lid), when I then wake it, it restarts and then gives me an error message saying that something went wrong and it had to be restarted. If I choose 'Sleep' from the menu and then immediately wake it again, or close the lid and then open it within a few seconds, it's fine. So perhaps it's a longer term sleep/wake period that is the problem? Has anyone else experienced this?

Further troubleshooting for my situation confirm that there is a conflict between having external three conductor 1/8" audio jack plug into my MBA at the same time when having thunderbolt HDMI cable plugged into external HP display going to sleep is fine however on wake there's a conflict between the audio assignment of these two devices causing an OS X crash where keyboard entry from the MacBook Air is no longer feasible to log into the system forcing a hard powerdown reset.
Interesting tests prove if you plug-in Apple earbuds with the four conductor 1/8"'audio plug into the MBA audio port there is no problem as OS X likely sees these earbuds as a smart device versus a standard three conductor audio cable plug to external speakers or not. Several different Three conductor audio jacks/cables were tested and the crash upon sleep wake continued.
After three conductor audio jack is plugged in but the HDMI is removed from thunderbolt then you wake the computer there is no conflict and it functions as intended No crash full functionality of all keyboards and mouse and put work correctly.
Likewise conversely if you unplug the three conductor audio jack and just leave the thunderbolt HDMI external display plugged in upon wake everything functions as intended so it's not specifically related to external display or audio cable but when both are connected that the conflict crashes the system Upon sleep wake.
Be reminded this configuration and scenario work perfectly fine prior to Yosemite OSX 10.10 update.
Even went to the sound audio settings and forced audio output two headphone audio and crash and still consistent one HDMI is connected to thunderbolt port waking from sleep.
Likely some trimming issues going on with the new Yosemite to do with audio assignment and potentially AirPlay. AiPlay was not being utilized however I have to Apple TVs that are in the background with AirPlay showing and the audio configuration settings but they were not being utilized at the time of these crashes.
This issue has no variance regarding MBA screen is open or closed when putting to sleep and wake initiated by typing keyboard key.

How to install yosemite on macbook air

Can you please tell me the steps to install and upgrade to the new Yosemite.

Hi ...
Make sure your Mac can run Yosemite > Apple - OS X Yosemite - How to Upgrade
If it can, then go here > Mac App Store - OS X Yosemite
Then click: View in Mac App Store
You can download and install Yosemite from there.
Yosemite is a 5.16GB file so make sure your Mac has plenty of storage space. Click the Apple  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
The download and installation takes about 45 minutes to an hour on a high speed broadband connection. Your Mac may restart several times on it's own.

Type Tool CS6 Yosemite on Macbook Air

Similar Messages

Maybe you are looking for