Type UI in CS6 in Surface Pro 3 is too small.  Adobe needs to isuue a fix for CS6.

I don't need to upgrade CS6 for any photography reason.  Adobe should make CS6 UI readable fro surface pro 3 users.  They have a fix for later versions.  Why not make it available in other earlier versions of photoshop.  This is not a question of adding new features, it is a question of making the UI readable.

Mylenium wrote:
Nobody goes back to fix up a 5 year old software that was never meant to be run on computers that didn't exist back then.
However good software companies like Microsoft fixes bugs user report on their Current  Software.  Adobe should fix bugs on current marketed software  like CS6 Adobe chooses not to. Microsoft fixed XP till the middle of 2014 years after windows 7 and win 8 were current.   Bugs go unfixed in Photoshop release after release. Adobe Program support continues to be sub par year after year.
Currently there are three CS6
perpetual Mac version 13.0.6
perpetual PC version 13.0.1.3
subscription version 13.1.2 PC and Mac

Similar Messages

  • I bought the Adobe Photoshop Classroom in a Book for CS6 by accident and I have CC. I know, stupid mistake. But I can't take return the book. Is is similar enough to CC that I can still get use out of the book? Thank you so much

    I bought the Adobe Photoshop Classroom in a Book for CS6 by accident and I have CC. I know, stupid mistake. But I can't take return the book. Is is similar enough to CC that I can still get use out of the book? Thank you so much

    Each version of Adobe products builds upon the previous ones.  Some things like filters and advanced features may evolve or become deprecated over time, but the basic tools have remained pretty much the same for decades.  As long as you know there are subtle differences between versions, I think you will still get a great deal of value from C in a B for CS6.  
    Also refer to the CC online tuts
    Photoshop CC tutorials | Learn how to use Photoshop CC
    Learn Photoshop CC | Adobe TV
    Nancy O.

  • I have a 4th gen iPad and the type face on the keyboard has been replaced with small squares.  How do I fix this?

    I have a 4th gen iPad and the type face on the keyboard has been replaced with small squares.  How do I fix this?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • I dropped my i phone 5 and i picked it up and my right side of my phone is black i can still type on it but there is no display what do i need to do to fix my phone?

    i dropped my i phone 5 and i picked it up and my right side of my phone is black i can still type on it but there is no display what do i need to do to fix my phone?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    If the issue persists you may have a hardware issue due to the Drop... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • Surface Pro 3, Project Siena Apps, Need CSS for that form factor ASAP please

    Now that the Surface Pro 3 is out, I really don't like the black bars that appear above and below Project Siena Apps.
    I don't know enough to figure out how *I* can edit the CSS which currently states:
    #publishedCanvas {
        /* TASK: 73670: Add support for different form factors. */
        width: 1366px;
        height: 768px;
        background-color: transparent;
    but I'd like the code I should use (at my own risk, I know) to fix the CSS for all my apps.
    Please, MS folks or anyone?
    -- Barb Bowman

    Now that the Surface Pro 3 is out, I really don't like the black bars that appear above and below Project Siena Apps.
    I don't know enough to figure out how *I* can edit the CSS which currently states:
    #publishedCanvas {
        /* TASK: 73670: Add support for different form factors. */
        width: 1366px;
        height: 768px;
        background-color: transparent;
    but I'd like the code I should use (at my own risk, I know) to fix the CSS for all my apps.
    Please, MS folks or anyone?
    -- Barb Bowman

  • Dreamweaver CS6: font size in menus too small on 1920 x 1080 screen. [was: Dreamweaver]

    Hi,
    I am using adobe Dreamweaver cs6 and my Laptop screen size 15.5 (39.4 cms) wide (1920 x 1080). My Dreamweaver software top tab menus like File, Edit, View, Insert, Modify, Format etc. these are menus font size too small in my laptop display so i am facing problem in development. I have try to resolve this issue through change to desktop resolution but after change the resolution of window property i have get only little bit change in font size of tab menus but i am not satisfied with this change if you have any other solution for this problem please reply me or email me on [personal information deleted by moderator]
    Thanks
    Parveen Kumar

    Unfortunately, the only way to change the font size in the Dreamweaver interface is by changing the display settings of your computer. On Windows, you can change the size of text and other items without changing the resolution by selecting Start > Control Panel > Display. I don't think there is an equivalent on a Mac.
    If you find the size of the menu items a problem, I suggest that you submit a feature request through the form at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.

  • Every time I download anything I get an error message stating ...could not open ....dmg because it is either not a supported file type or the file has been damaged." What do I need to do to fix this problem?

    For the last month or so, every time I download anything I get an error message stating "........could not open ...... .dmg because it is either not a supported file type or because the file has been damaged...." I do not know what to do to fix this issue. Any ideas?

    hmmm.... try this
    basic troubleshooting:
    Repair Disk Permissions http://support.apple.com/kb/PH5821
    Repair Disk http://support.apple.com/kb/ht1782
    reset ACLs http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

  • Is there a fix for CS6 Photoshop crash when adding audio track?

    I tried posting this problem yesterday, but have gotten no response:
    I'm video editing using Photoshop CS6 (NOT Premiere! NOT CC) and I'm consistently experiencing an application crash (i.e. quit) within a second of selecting/loading an audio track to my edited video. My video is about 3min long in 1080p and I'm running OSX Yosemity on a 13" MacPro Retina w/16GB internal memory. Is there a fix (or even a known cause) for this problem?
    Since my original post I've tried using a smaller video format (i.e. 720p) and shorter length(i.e. 40 sec), but to no avail. Photoshop CS6 still quit immediately after loading an audio track and fail to save.
    Other info I can add: Yosemite 10.10.2, Photoshop CS6 13.0 x64

    Use a proper video application.

  • I have an Adobe Flash Professionals digital classroom book for CS6 and was following all steps easily until it ask me to select the text tool and change it from classic to tfl in the property inspector. I looked and all that drops down is dynamic, static,

    I have an Adobe Flash Professionals digital classroom book and was following all steps easily until it ask me to select the text tool and change it from classic to tfl in the property inspector. I looked and all that drops down is dynamic, static, and input. Where is the TFL and Classic ? I watched adobe learning center but he was using CS5. Can anyone please help?

    Hi,
    Do you use Flash CS6 to follow the instructions in the classroom book? If yes, then you can find it under text drop down for an AS3 Document as shown below
    If you follow the instruction in Flash CC or Flash CC2014 then you will not find this option as this is deprecated.
    Thanks!
    Mohan

  • CS6 menus and tool bars too small

    I have a new Dell XPS15 laptop with Windows 8. Installed Photoshop CS6 & all tool bars and menus are too tiny. I've contacted Dell Support and Adobe Support and everyone blames the other guy. Please help.

    This is a PC only issue, I believe Macs with Retina displays do not have this problem...  I just got a Dell M3800 with a QHD+ 3200x1800 display and sadly yes, all Adobe CC products and AVID editing software are pretty much unusable in hi-res mode under Windows 8.1.  That is especially disturbing when Dell claims that the M3800 is certified to run those applications without mention of the resolution limitation which is a pretty big deal for anyone working in the graphic and video business.  False advertising it is

  • I am trying to download the Adobe Camera Raw 7.1 upgrade for CS6.  The files will not unzip.

    I am trying to download the Adobe Camera Raw 7.1 upgrade.  The zipped files download, but when I try to extract the zipped files, I get an error message saying that there is already a file with the same name as the folder name I specified, and that I should specify a different name.  The four zipped components are META-INF [Folder], payloads [Folder], AdobePatchInstaller [Application file\, and payloads [File].  Evidently, there is a conflict between the payloads folder and the payloads file, but I cannot be sure.  All filenames came from the download.

    Are you using CS6 applications ? Camera Raw 7.1 is only compatible with CS6 applications. Try this as mentioned on http://www.adobe.com/support/downloads/detail.jsp?ftpID=5391
    For Photoshop CS6 and Creative Suite 6 customers, we recommend that you install Camera Raw 7.1 by selecting Updates from the Help menu and follow the on-screen dialogs to download and install the latest available Camera Raw update. You can also click the link below to download an installer that replaces the existing Camera Raw plug-in with Camera Raw 7.1 for all CS6 applications.
    Thanks
    Nikhil

  • HT4757 Fuji X Pro 1 Raw compatibility, Is aperture working on a fix for this??

    I just got the new Fuji X-pro 1 a month ago and am waiting for a patch so I can use camera raw...Is anyone else out there in the same situation? Have I missed something??

    I found this in an older post, although I didn't hear anything from support.
    +I have heard from tech support from Apple. This is a defect in iTunes. There is nothing you (we) can do to fix it. We will have to wait for iTunes to release a fix. In the meantime, to get a refund, when you get your invoice from Apple for the rental, simply click on the "report a problem" link in the email and follow all instructions. Your money will be refunded. FYI this problem is occurring on Mac as well as Windows.+
    *If this is true I really hope this issue is fixed before the release of iTunes 7.7!*

  • Need recommendation on new monitor for CS6 and lightroom 5 -

    I would like to upgrade my monitor for photo editing using CS6 and lightroom 5.  I have spent a lot of time reviewing several monitors and just as confused as when I started.  I am looking for a monitor in the $500 to $900 range but want to make an intelligent decision.  HELP!
    JAG-EVV

    If you have a subscription there should be no problem.  You should be able to install on two machines. If you try to activate a third machine I believe the activation server will deactivate all your activations.  Then activate the current machine. You can then re-activate one of you other machines.
    If you have a perpetual licence and have two activation you will need Adobe Customer Support to assist you.

  • Got water on my Macbook Pro's trackpad, do I need to turn it off for it to dry?

    I know that there're tons of topics on this, I read everything but still I'm not sure what to do..
    About 24hs ago I spilled a tiny bit of water on my trackpad while using it with wet hands (without noticing) and now the cursor's acting unresponsive, jumping around arbitrarily on the screen and clicking stuff by itself. I shut it down for about 12hs before using it again, the trackpad worked fine for about 2min and then started acting all funny again. I read on other forums that usually the it starts working again once it dried, but my question is if for it to dry I need to keep the Macbook shut down or can I keep using it with an external mouse? I really need it for work and I don't have another computer. Thank you very much!

    I would definetly not use it....shut it down. Hopefully you haven't fried it.
    If you have a removable battery, take it out and leave the back of your Mac open. I would then flatten out the screen and keyboard and turn it upside down, keyboard and trackpad on a towel. I would even put a fan blowing on it. Then every other day flip it over and blow the fan on the other side. I would not power it back on for at least a week and a half....maybe two.
    It takes forever to dry out a MacBookPro. If you can let it dry longer then 2 weeks.

  • Pen Pressure in Photoshop on MS Surface Pro..

    Did anyone get the new update today and did it fix the pen pressure issue for Photoshop use on the MS Surface  Pro Tablet???? I know this is an aging die hard issue but man do I need it bad,.....-Joe

    Hey there folks,
    I figure I take some time to respond to the surface pro things,.....
    @Alanomaly, yes pretty good so far, I can not complain about the pen pressure. MS had nothing to do with it except to communicatge with Adobe, and Wacom..as things go, all three needed to agree on working on this. The driver is through Wacom on their site under the Tablet PC select. Thats it. You load, restart PC an it works.
    Now as far as comparing it to Intuos/Cintiq, well, its not a question really. The Surface Pro tablet functions like a PC but is smaller  than a 9x12 Intuos and Cintiq, with the exception of the smallest sizes of eother of those. But, I do not use the smaller sizes. I do have a Cintiq 24 HD, love it!!! When Im away, the road, at the shore,..or at work and want to doodle, sketch, concept draw, whatever, Im not using Surface Pro to do full fledged digital content, ..Ill take it home and finish or expand on it.....but I wont divulge my personal reasons for using it , but, that is why I think Surface Pro exists, so I can use it for what I want and be happy.  Now, if Wacom comes out w a tablet and its a tablet like Surface Pro, and a user wont need to hook up a Wacom type of tablet to a PC to work on it as a mobile device, then, I ll be rethinking my options....maybe.
    Now, I have  a Xeon cpu in my machine and a second one when Im ready to use it, and I see the i5 and i7 cpus really taking advantage of the mixer brushes and interactive brushes better than my xeon cpus. I wish to make that better on my machine but thats another story.
    I hope tht helps.....
    -J

Maybe you are looking for