TypeError: Object [object Object] Error message on website with parallax scrolling

My website, www.suchudance.org is having some error issues that have never surfaced before.
This is the error message I receive on a webpage that has never had this error before:
" MusejSassert: Error calling selector function: TypeError: Object [object Object] has no method 'on' "
I have parallex scrolling on the "tickets.html" page and that page, all of a sudden is no longer loading until I click on the Ticket menu button.
Does anyone know what is going on?
Thanks,
Vipul

Hi Vipul,
I am having trouble getting this error. I opened your site and previewed it in the browser, using Chrome, Firefox and Safari. I tried going to the tickets.html page using the url and using the menu on your site but both gave me the same result and no JS assert. Is there something I'm missing? Is your site right now (http://www.suchudance.org/tickets.html) the expected result or are you getting the error on that as well?
Thanks!
Dana

Similar Messages

Error message on websites with audio

Problem: When I visit a website that has audio (wave,midi)I get the following meassage:"QuickTime unavailable". Under that it reads:"QuickTime was not found.Error # 1289460 n\n\ please install QuickTime on this computer." It has an OK button. When I click it I get :"Illegal operation in plugin." Under that :"The plugin performed an illegal operation. You are strongly advised to restart navigator." I had down loaded the free Quicktime and then purchased the upgrade.This problem started immediatly. I unistalled QT and reinstalled it but it's still the same.I hope someone can help...Thank you.
Windows XP

what is your windows version, is it original and official with all the needed service packs etc. ?

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" the error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files

When I try to reformat there is an error message about configurations with the pointing device

When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

I am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

[svn] 3406: Tweaks to ZipCodeValidator to ensure error messages are consistent with pre-patch behavior .

Revision: 3406
Author: [email protected]
Date: 2008-09-29 13:25:10 -0700 (Mon, 29 Sep 2008)
Log Message:
Tweaks to ZipCodeValidator to ensure error messages are consistent with pre-patch behavior. Mustella tests pass (verified via cyclone).
Reviewer: Deepa
QA: Yes
Localization: Yes ***
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/bundles/en_US/src/validators.proper ties
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/validators/ZipCodeValidator. as

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

While updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

- What was the error message?
- Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod. If the iPod shows in iTunes then you can try again. However, You should try to resolve the error message first.
- If iTunes does not see the iPod try reetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes.

M1319F Scan error message " cannot communicate with the scanner"

I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

Funny, got all the 'Publishing Error' messages but websites get published

Hello all.
I have 3 .mac websites using iWeb.
Last night had trouble publishing, because some "navigation bar error", so I 'publish all', still failed. So every site every page on the left panel is in red.
Brought the Domain file to the office to try and publish, still failed. Mounted iDisk and trash everything, then tried 'publish all' again, still getting some error messages, then tried last try 'publish', reported a network error.
All the icons on the left panel is still in red
*But funnily, a check on my websites and all of them have been published!*
*So how am I going to "update" my iWeb/Domain file, because they are all in red, thinking they are not published yet?*
Cheers

I am having the same problem, after weeks of everything being OK. Suddenly, in the last 24 hours I get a variety of messages, including the "Unknown Error" message and one called "Lock Error". Beats me what THAT is.
When I look at the url with Safari, it all seems to be fully updated, but iWeb certainly THINKS there has been an error, and leaves all the pages that have been altered in any way in the familiar red highlight color.
Trying to contact customer support. Could take a while, of course!
Good luck!, Charlie
Message was edited by: Charlie Morgan
Message was edited by: Charlie Morgan

How to display error messages in BAPI_PO_CHANGE with PO and item ?

Hello Friends,
I am calling BAPI_PO_CHANGE to update delivery flag for 50 POs.
Each PO has 4 line items. For ex.
10001     10     5.00     material1      X
10001     20     45.00     material2      X
10001     30     22.00     material15      X     u201Cerror
10001     40     45.00     material41      X
10002     10     46.00     material17      X
10002     20     25.00     material3      X     u201Cerror
10002     30     75.00     material5      X     u201Cerror
10002     40     44.00     material8      X
u2026u2026u2026u2026u2026..
u2026u2026u2026u2026u2026
Now, suppose some line items have error.
I am able to get it from BAPIu2019s    RETURN table.
But how can I display that error message with PO and line item?
NOTE : I am calling BAPI_PO_CHANGE for each PO with ITEM internal table.
Please guide me.
Regards
RH

The it_change_return fields parameter and row identify the PO_ITEM.
Try this...
*&      Form READ_MESSAGES_OP_CHANGE
      BAPI_PO_CHANGE Return messages
FORM read_messages_op_change .
DELETE it_change_return WHERE type = 'W'.
DELETE it_change_return WHERE type = 'I'.
LOOP AT it_change_return ASSIGNING <is_change_return>.
    IF <is_change_return>-type = 'E'.
      z_error_flg = 'X'.
    ENDIF.
    v_item = v_item + 1.
    it_log_mess-packagenr = v_packagenr.
    it_log_mess-object = v_object.
    it_log_mess-docnum = v_docnum.
    it_log_mess-itemnr = v_item.
    it_log_mess-type = <is_change_return>-type.
    it_log_mess-id = <is_change_return>-id.
    it_log_mess-mnumber = <is_change_return>-number.
    IF <is_change_return>-parameter <> 'POITEM'.
      it_log_mess-message = text-po1.
      REPLACE '&' WITH z_po_number INTO it_log_mess-message.
      CONCATENATE it_log_mess-message <is_change_return>-message
        INTO it_log_mess-message SEPARATED BY space.
    ELSE.
      READ TABLE it_change_poitem ASSIGNING <is_change_poitem>
        INDEX <is_change_return>-row.
      it_log_mess-message = text-pr2.
      REPLACE '&' WITH z_po_number INTO it_log_mess-message.
      REPLACE '@' WITH <is_change_poitem>-po_item
        INTO it_log_mess-message.
      CONCATENATE it_log_mess-message <is_change_return>-message
            INTO it_log_mess-message SEPARATED BY space.
    ENDIF.
    it_log_mess-message_v1 = <is_change_return>-message_v1.
    it_log_mess-message_v2 = <is_change_return>-message_v2.
    it_log_mess-message_v3 = <is_change_return>-message_v3.
    it_log_mess-message_v4 = <is_change_return>-message_v4.
    APPEND it_log_mess.
ENDLOOP.
ENDFORM.                    " READ_MESSAGES_OP_CHANGE

Getting error message when connecting with DI

Hi all
i'm getting error code -8006 and error message: Resource Error. when i try to connect to the company db using the method connect() of the object Company.
does anyone knows what causes the problem and if so how to fix it?
appreciate the help
Yoav

Hi, Yoav.
I think it's the better to start with the SAP Notes search. The first that matches your error is <a href="https://websmp105.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=872933&_NLANG=E">here</a>.
hth

Firefox CLOSES (no crash message) when websites with streaming video are loaded.

Before it is suggested, I have fully updated the browser, and updating flash more times than I can count. In addition, this has been going on through many firefox updates, so it is not limited to just the recent update.
I run Firefox on OSX Tiger, and for about a year now firefox has about a 50% chance of randomly closing whenever I view a website that has streaming video content. Some examples are ESPN, Hulu, MLB.tv and YouTube.
It is NOT an official crash though. No crash reports are registered, no error messages are given, Firefox simply closes completely with not so much as a "terminal error" pop-up. I usually have to watch content from sites that use steaming content on Safari just because Firefox is so unstable on my system when loading ANY video content.
This issue is NOT limited to flash, as Firefox will do the same thing with non-flash video with pretty much the same regularity.
PLEASE don't just tell me to update again, I've done that countless times for each and every update of Firefox in the last year. It has NEVER worked. Although I'm 95% sure that flash is installed fine, because I never have any problems with it on Safari.
Thank you for any help you can give me.
Currently Using
Firefox 3.6.7
OSX 10.4.11
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_4_11; en) AppleWebKit/533.16 (KHTML, like Gecko) Version/4.1 Safari/533.16

just got the notification about FF 3.6.8 installed it, reinstalled flash just for paranoia's sake
problem still occurring. please help.

When I try to open yahoo bookmarks (red button) on Firefox I get a "page not valid" or some otgher error message (works okay with Explorer.

I recently done an upgrade on my PC (can't remember what). since then I haven't been able to open or log in to my Yahoo bookmarks (red button on tool bar). I get a log in screen, but when I log in with my Yahoo ID and password, I get "This page expired" error message. I've gone the the help menu and reset my yahoo password, but it still won't let me log into yahoo bookmarks with Firefox. If i use Explorer, it works fine. I like Firefox, but I need to be able to access yahoo bookmarks.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Click the menu button [[Image:New Fx Menu]], choose History, and then Clear Recent History....
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Returning error messages to shell with TERMOUT OFF

Hi all,
I did a search in this forum and I couldn't find the answer.
I am unloading (spooling) a table using SQLPLUS. Since I don't want to display these records on screen I am using set termout off.
But I want to see error messages on the screen. I used whenever sql error exit sql.sqlcode. It is displaying the error messages in the spool file. But I would like to have these on screen so that I can capture all my errors in to a log file.
Thanks in advance,
Naren

There is no setting in SQL*Plus to separate
errors from other text.
There is a general risk using sql.sqlcode.
The OS may not be able to cope with large numbers,
the returned value may be modulus the maxium
return code allowed. The risk is that the final
value may be the same as a successful return value.
For safety I exit with FAILURE and then
check the output file for the exact error.
-- CJ

TypeError: Object [object Object] Error message on website with parallax scrolling

Similar Messages

Maybe you are looking for