Typefi Publishing System

Hi to All You Techies out there,
I am researching and writing a white paper on a relatively new software application, Typefi Publishing System (TPS), which, as you may know, uses MS Word, Adobe InDesign, and Acrobat to translate content to XML, creating a pdf in the process. I'm having a problem finding any downsides to using this tool, with the exception of one software consultant who doubts that TPS can route content from HTML back to the original markup. Anybody out there who's had a less than a stellar experience with the TPS tool I would like to hear from. Also, if you've found another software system that you find does a good job in converting source material to XML, and integrates page composition software in the process, I'd love to hear from you too. Thanks.--Pat

Pat -
If we can be of any assistance in your research and writing, such as speaking with some of our customers about their experiences with Typefi Publish and their workflow, just let me know. We're pleased that you're having trouble finding downsides... And I wonder if the skeptical consultant has actually seen Typefi Publish.
ciao,
Caleb
Caleb Clauset
Senior Solutions Consultant
Adobe Certified Expert, InDesign
Typefi Systems
+1 215 586 4020

Similar Messages

  • Adobe Community Publishing System is live.

    The Adobe Community Publishing System is live. You can use this new system to write and post articles directly on the Adobe website.
    I think that this system may be an especially good fit for people like Rick Gerard, David Wigforss, Mylenium, and the other folks around here who tend to write lengthy responses to forum questions.

    I'm most familiar with the Apple implementation of jive.
    There are a series of login bugs / features.
    You should login before surfing the forums.  This avoids a bug were the software doesn't notice that you have logged in.
    If your login status get confused. you need to clear your web browser caches.
    You should pick a forum base like the list of your posts and consider this  your home base.  You should put this in a separate window.  You should find an auto reload add-on to your browser that reloads the page every 15 to 20 minutes.  Thus, you avoid the forced logout problem.
    It's probably best to use the Chrome or firefox web browser.  Chrome seems to work the best on the most platforms  ( works on the ipad whereas Safari has problems ).
    Robert

  • Feature Request: Add in file processing hooks into publish system

    When publishing an Edge composition all of the javascript gets minimised, which is great.
    It'd be great if 'compilation' tools like this could be added/removed, either as a software-wide plugin or as a list of processors in the publish settings.
    This could be used to do the following sorts of things:
    Obsfucate code
    Use alternative JS minimiser
    Optimise SVG assets (remove identity transforms, resolve certain 'use' nodes, etc)
    Compress / Recompress imagery (similar to flash's JPEG publish settings).

    Hi, TByrne-
    Good suggestion!  I've brought this up internally for consideration.
    Thanks,
    -Elaine

  • Considerin​g datafinder for publishing data

    Hi
    I am considering a data publishing system.  We currently have a server that holds data in the form of CSV files. We require a system that allows multiple clients (offsite - around the world) to access/view/analyse the data, ie view logged data for a given day, perform a histogram on data for the past month etc.
    I have been looking at the options, and just from what I can see on the NI web site, a possible solution could be:
    DataFinder Server Edition running at our office, constantly indexing the data
    LabVIEW applications deployed to my client's sites, using Datafinder toolkit to retrieve data to then process.
    This seems fairly straight forward.  The main downside being the deployment cost.
    What I’d like to find out more about, is how this goes running over the internet.  Also, they could potentially have a large number of clients wanting to view data at any one time.  How scalable is this solution? Would we need to look at using Webservices in any fashion – or what about this new Web UI Developer that’s coming out soon – can this call Datafinder Toolkit functions to produce a non-LabVIEW based front end?
    Thanks!
    Christopher Farmer
    Certified LabVIEW Architect
    Certified TestStand Developer
    http://wiredinsoftware.com.au

    Hi Chris,
    The 2010 version of the DataFinder has no built-in mechanism to offer query access to remote clients through a web browser.  If your "multiple clients (offsite - around the world)" are connected via WAN (ethernet), then there is no trouble with the LabVIEW clients contacting the DataFinder "remotely".  If instead your "multiple clients (offsite - around the world)" are outside your company firewall, then you will need to build your own web service to bridge this gap.  The LabVIEW UI Builder would in principle be an excellent choice for this task, but it does NOT work with the DataFinder Toolkit.  The best option to build a web service that talks with the DataFinder on the back end is to use "regular" LabVIEW 2010.
    The DataFinder operating normally within an in intranet supports concurrent access and scales nicely with client loading.  If you have to create a web service to bridge the gap between the DataFinder and customers outside your firewall, then the scaling and loading will depend keenly on your web service implementation.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Oracle BI Publisher - can not access Shared Folder , using Oracle BI Server

    Hi there,
    We have an installed OBIEE and BIP (BI Publisher) system which is the security setting of BIP using "Oracle BI Server".
    Our OBIEE security is using the combination of LDAP (authentication) and Relational Table (for grouping user privillege)
    The integration connection between OBIEE and BIP is successfull, and I can connect using Administrator to the BIP
    But when I assign a general user using group : XMLP_Admin (define in rpd file and relational table), the user can log in to BIP, but can NOT access the Shared Folder.
    the error desc : "Error 500: SRVE0199E: OutputStream already obtained"
    Anyone can help ?
    Thanks a lot
    -toni

    Did you define Roles and Permissions to the shared folder from BIP Admin?
    -Prakash

  • Java publishing framework using Weblogic personalization

    Hi All, Has anyone used the Weblogic personalization server/portal or
    a different Weblogic product as a publishing framework.
    We want to design a publishing system in which we can quickly create
    templates for new type of content on the website, and provide an
    interface for entering the data to the admins. The data can then be
    presented using XML/XSL transformation, and the source can either be a
    database or static XML file.
    Cocoon does provide a framework that comes close to our requirements,
    but as we are using weblogic it might be worth expoling if a
    commercial product can be used for such a framework.
    I am sure many people have a need to post content on the site and use
    a variety of mechanisms to use it.
    Also, can the Portal product be used to generate portlets which can be
    placed on multiple pages. We are looking at 500+ pages in our site,
    with 100+ portlets.
    I can give more specific details if needed. Any help is appreciated.
    Please feel free to also email at [email protected]
    Thanks, Yogi.

    1) http://commerce.bea.com/showproduct.jsp?family=WLP&major=8.1&minor=4
    2)Make sure you add your JDBC drivers to the beginning of CLASSPATH in either setDomainenv.cmd or setEnv.cmd
    3)What really helped was BEA support and playing with BEA's JDBC example that shows how to create and deploy and use a data source.
    http://dev2dev.bea.com/codelibrary/code/examples_jdbc.jsp

  • How to install ABAP as a backend system in my EHP1

    I have successfully installed EHP1 composition enviornment from SDN , now i m able to work on
    NWDS for JAVA and Enterprise portal . it contains java application server .
    but in order to get data from ABAP Backend system from NWDS(JAVA) , I don't have ABAP Backend sysytem , how to install abap backend system with abap application server in my system ????
    there is one link to install Netwaever ABAP 7.1 trial version( webdynpro abap and abap application server ) in sdn  but in system requirement it clearly mentioned that " make sure that there is no SAP sysytem installed in ur system " .
    I need webdynpro java ,webdynpro abap  and enterprise portal together  but  i have only webdynpro java and EP , so how to install abap as a backend system in my EHP1 ?
    or any other download link which contain all three ??
    please help me ?

    Hi,
    CE is indeed not double stack. However, it is possible to install both an ABAP and a CE on the same host provided they have different system ids and instance numbers. This works for the current SDN download versions: CE 7.1 and CE 7.1.1 (system id CE1, system number 00) and AS ABAP 7.01 (system id NSP, system number 02).
    Needless to say, it is perfectly possible to configure and establish all kinds of connections between the two:
    JCo/RFC calls in both directions
    Web Service calls in both directions
    AS ABAP as a portal backend
    publishing system information in SLD
    accessing an ESR
    accessing a Service Registry (publish + query)
    using AS ABAP as user database for the CE
    Single Sign-On
    Best regards,
    Thorsten

  • Error message at Community Publishing sign-in

    I am getting error message There are no document templates for the email address (Adobe ID) you provided. Please contact [email protected] when running Adobe Community Publishing (Beta), I can not sign in.

    Hi, PE,
    There is no direct replacement for the Community Publishing System (CPS). 
    SWAPP content is for the Adobe design community.  It's  is a free commumity publication for the iPad, showcasing how community members made stuff with Creative Suite. Community members can submit tutorials and design techniques using a custom InDesign template. We will publish selected submissions to SWAPP.
    If community members don't want to use SWAPP--not to worry! 
    We still highlight content throughout our Community Help ecosystem, so contributors can let us know about any great content by posting a link in a forum or adding a comment to a specific Help article.
    Kirsti

  • Pushing or Pulling data from Systems Center (SCSM & SCOM and maybe SCCM) 2012

    Is there any way to publish Systems Center Data/reports via RSS or another way so that they can feed "live" data to digital signs? 
    I get that there are ways to create dashboards and publish to Sharepoint, but I am trying to take it up a notch, any hope for me?
    Thanks,
    chip
    Chip DiComo [email protected]

    Gadgets were considered insecure and are no longer supported.  I tried to write a custom SCCM gadget and ran into this.
    http://windows.microsoft.com/en-us/windows/gadgets
    nick

  • ThinkVanta​ge System Update on 64-bit

    Hi!
    I see Windows Vista 64-bit updates in System Update, however clicking on it and downloading it for installation always gives a message that installation is unsuccesful. What gives? Are we supposed to install these updates at all?
    Jasper Jugan - http://www.backpackboy.com
    x61 Tablet | 1.8Ghz LV7700 | 4GB RAM | MultiView/MultiTouch | Windows Vista Ultimate 64-bit
    Solved!
    Go to Solution.

    i see, lenovo should have a review process before publishing system updates
    Jasper Jugan - http://www.backpackboy.com
    x61 Tablet | 1.8Ghz LV7700 | 4GB RAM | MultiView/MultiTouch | Windows Vista Ultimate 64-bit

  • Getting error while clicking on System Monitoring

    Dear All,
    I have confirgured EWA in Solution Manager 4.0 for ECC6.0 Servers. EWA is getting generated without any issue. I have to monitor the Satellite Systems from Solution manager, so when i tried to click System Monitoring/Administration, it is giving error as  "http://solman.srhouse.com:8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm call was terminated because the corresponding service is not available.".
    ErrorCode:ICF-NF-http-c:009-u:SOLARSERVICE-l:E-i:solman_ESM_01-v:0-s:404-r:NoExtensionFound
    If any one has come across this issue, please help to resolve this issue.
    Thanks & Regards,
    Ranjith Kumar D

    Hello Ranjith,
    Your Portal service is may not running.
    Logon with <sid>adm and start jcmon and check if all server processes are up and running.
    If jcmon is properly running, then try using the following link and check what happens.
    http://solman.srhouse.com:8001/sap/bc/gui/sap/its/webgui/!
    The above url pattern is from integrated ITS server, for this to work you should maintain FQDN - fully qualified domain name.
    The url should be
    http://<host>.<domain>.com:<port>/sap/bc/gui......
    how to do this?
    check this WIKI
    https://wiki.sdn.sap.com/wiki/display/BSP/FullyQualifiedDomainName%28FQDN%29
    also, uncheck the "show friendly error messages" check box from the browsers tools->internet options->advanced tab to get more details error messages thrown by the server instead of just "the page cannot be displayed"
    And also make sure that you have activated the services, virtual_host, sap , bc, gui, sap, its , in transaction SICF and also did you publish SYSTEM and WEBGUI services to site INTERNAL.
    for more info check this weblog.
    Running your first  ITS WebGUI application in SAP NetWeaver 04 ABAP Edition - NSP
    Hope the above info is helpful.
    Regards,
    Satish.

  • S1000D Publish IETP not available

    I am attempting to build an IETP from the sample S1000D bike data provided with TCS 4.  I have opened the S1000D bike sample Publication Module (PM) in Framemaker 11.  I followed  the help file instructions but have encountered a couple of issues.  First, when I attempted to set global applicability for the book, there are no applicability values available (see help file instructions below).
    To implement applicability (Global) at a book level,
    When the book file is in focus, select S1000D > Common Source Data.The S1000D Common Source Data dialog appears.
    In the Common Source Data dialog, select the Applicability tab and then PCT.
    In the list of products, select the applicable product and click Apply.
    I am beginning to think that the Book/PM is not properly set up with applicability values.
    Second, the "Publish IETP" menu item is grayed out and not available.
    Any ideas on what I am doing wrong?
    Mike

    Mike,
    Yes it seems to be an installation issue. Upon reinstall, Bridge 64 bit wasn't working (missing dll). I think RoboHelp might need Bridge so I uninstalled and reinstalled. Didn't work, reinstalled everything including 32bit Bridge. Bridge works now and I have "Print IETM". I still don’t have ability to set applicability once switched to Publication Module Book (using 1000D>Common Source Data). Unfortunately RoboHelp failed on opening and corrupted the PM so I need to go find another copy. Possibly the Bike PM isn’t properly authored – I haven’t really spent much time in the 4.0.1 DMs or publication modules for that matter.
    I've been very happy with both ADG and Mekon. Customer service from both vendors has been exemplary.
    We've elected to go with v4.1 so this has caused a few issues with the Mekon pack lagging behind some of the 4.1 changes but they've addressed the problems quickly with patches for us.
    ADG R4i CSDB works well. A few similar 4.1 issues but for us they were the only vendor who could deliver a full S1000D publishing system affordable to small/mid-sized business. Aside from what I think is a great product, what I like most is the personal touch – they’re still small enough where your questions are periodically answered directly by the CEO or CTO. (I don’t work for ADG or Mekon – just happy with their service.)
    Are you using applicability? Internal or external using the CIR?
    Regards,
    Muns

  • Log On problem via webgui. sap/bc/gui/sap/its/webgui

    Hello, would you be so kind to help me in my problem.
    I have sap web as 7.00, and i have published a service for using "sap gui for html" via browser from the Remote Place.
    http://........./sap/bc/gui/sap/its/webgui
    icm/server_port_0 i made 80 in the profile
    (icm/server_port_0     = PROT=HTTP,PORT=80).
    But there is such a problem.
    When u try to connect using this url it gives u the log on screen to enter your user/password (u can even change it!!)
    but when you try to log on it just refreshes the screen and nothing actually happens.
    The same time when you are doing it licaly in the office everything works fine.
    Does anybody know what can be the solution of this problem?
    Dmitry.

    Hi! &#1055;&#1088;&#1080;&#1074;&#1077;&#1090;.
    Well i have tried to use this transaction (SIAC_PUBLISH_ALL_INTERNAL) and it published a lot of services, but still i can't log on from home, for example, to the system in our office where ICM and ITS are running.
    I found an interesting link
    /people/durairaj.athavanraja/blog/2005/08/21/running-your-first-its-webgui-application-in-sap-netweaver-04-abap-edition--nsp
    And i tried mannually to publish "SYSTEM"  and "SHUFFLER" services. The same time "WEBGUI" service works fine in the office. Those two i also can publish, but i can't start them in SE80.
    It is written that
    sap/bc/gui/sap/its/system/ call was terminated because the corresponding service is not available. And i can't find such a service following that link... Still it shows that it has been published.
    May be it is so because i can't test the service
    /default_host/sap/public/bc/its/mimes
    The error is
    The URL http://.../sap/public/bc/its/mimes was not called due to an error.
    Note
    The following error text was processed in the system S01 : Illegal access to a string (offset too large)
    The error occurred on the application server s00-5000_S01_01 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SPLIT_PATH_GIVE_ROOT of program CL_IAC_HELPER=================CP
    Method: SPLIT_PATH_GIVE_SERVICE of program CL_IAC_HELPER=================CP
    Method: GIVE_MIME_CONTENT_USING_PATH of program CL_IAC_HELPER=================CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS_MIMES=========CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP

  • I can not share file from Jabber for Iphone and Android

    Hi guys.
    I have:
    CUCM9.1/Publisher y Subscriber
    System version: 9.1.1.41900-1
    Presence/Publisher
    System version: 9.1.1.41900-1
    Expressway x8.1.1
    Cisco Cisco Expressway-E
    Expressway x8.1.1
    Cisco Expressway-C
    Jabber for Android and Iphone 10.6
    I do not have "file transfer"  and my Iphone an Android.
    I don not have "share desktop" from internet on my windows jabber.
    The calls and chat is working fine, but when I wante send a file, the option on my iphone is disable.
    Why?

    Hi dennisalpizar07,
     check this:
    Jabber for Android officially supports receive BFCP video sharing on TAB devices (normally used for Android Tablets without native calling capability).
    The Jabber for Android 10.6 release enters a beta trial on receiving BFCP video sharing on BOT devices (normally used for Android smartphones and phablets)
     page 2 of the Cisco Jabber for Android 10.6.x Release Notes.
    Hope this helps.

  • Problem with 9iAS and Day Communiquh 3

    Hi,
    i have a problem with the deployment of Day Communiquh 3 web application (a tool for content management) on Oracle 9iAS (not on the OC4J stand-alone..).
    As explained on Day guide, i've disabled the following services in the delivery.xml of publish/system/conf directory (the file is put in attachment for a better comprehension):
    - ServletEngineService;
    - ShoutService.
    Moreover, i've updated the following tags:
    - fakeurls, with <redirect from="/" to="/cq3/playground/en.html" />;
    - loopback, with the port i use (7778).
    Then i have packed up the CQ3 webapp in a WAR file (cq3-web.war): i give you in attachment the WEB-INF/web.xml used.
    Finally i have packed up the WAR file in a EAR file, using the Enterprise Manager of 9iAS: i've put "cq3" as name of the deployed application, and "/cq3" as context root, so that users can access the application typing in a browser "http://<server_address>:<port>/cq3".
    Then i've found the following problems:
    - firstly, "http://<server_address>:<port>/cq3" doesn't redirect to "http://<server_address>:<port>/cq3/playground/en.html" as specified in delivery.xml: a "404 not found" error raises; so i have to type "http://<server_address>:<port>/cq3/playground/en.html" manually to view the Communiquh Playground;
    - anyway, the Communiquh Playground isn't shown correctly: every link and every image refers to an address like, for example, "http://<server_address>:<port>/playground/en/my_image.gif", i.e. without the "/cq3" context root in front of "/playground..".
    Anyone that could help me to resolve this issue is welcome. Please answer to [email protected]

    Hi,
    i have a problem with the deployment of Day Communiquh 3 web application (a tool for content management) on Oracle 9iAS (not on the OC4J stand-alone..).
    As explained on Day guide, i've disabled the following services in the delivery.xml of publish/system/conf directory (the file is put in attachment for a better comprehension):
    - ServletEngineService;
    - ShoutService.
    Moreover, i've updated the following tags:
    - fakeurls, with <redirect from="/" to="/cq3/playground/en.html" />;
    - loopback, with the port i use (7778).
    Then i have packed up the CQ3 webapp in a WAR file (cq3-web.war): i give you in attachment the WEB-INF/web.xml used.
    Finally i have packed up the WAR file in a EAR file, using the Enterprise Manager of 9iAS: i've put "cq3" as name of the deployed application, and "/cq3" as context root, so that users can access the application typing in a browser "http://<server_address>:<port>/cq3".
    Then i've found the following problems:
    - firstly, "http://<server_address>:<port>/cq3" doesn't redirect to "http://<server_address>:<port>/cq3/playground/en.html" as specified in delivery.xml: a "404 not found" error raises; so i have to type "http://<server_address>:<port>/cq3/playground/en.html" manually to view the Communiquh Playground;
    - anyway, the Communiquh Playground isn't shown correctly: every link and every image refers to an address like, for example, "http://<server_address>:<port>/playground/en/my_image.gif", i.e. without the "/cq3" context root in front of "/playground..".
    Anyone that could help me to resolve this issue is welcome. Please answer to [email protected]

Maybe you are looking for