Typekit font not working

Hi everyone,
I paid typekit to use Proxima Nova typeface and wanted to use it on my site,
and I found a thread saying follow Museinsider's blog post here should be all good
http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html
I did follow the post but it turned out not working, when viewed in live either my texts disappear or they won't change at all(still showing as images)
rightnow my web site is showing text as image...
Seriously need help, whats exactally not working?
Thanks a lot
Roger

Hi,
You are correct in observing that:
- Using Proxima Nova (as a system font) in Muse will cause Muse to export text as images
- For the museinsider.com workflow, you need to use a web-safe or web font
- Using a web-safe font like Helvetica only gives you access to four styles (Regular, Bold, Italic, Bold Italic)
In another related thread (http://forums.adobe.com/message/5719573#5719573), I had suggested using a web font with a larger set of weights and styles (e.g., Source Sans Pro). I didn't hear from the user if that actually worked, but it is worth a try.
Abhishek

Similar Messages

  • Typekit fonts not working on Form buttons

    Hello,
    I just created a form within Muse, my Typekit seems to be working for everything except the Form Submit button.
    I looked in previous discussions and it was mentioned if any of the states do not have the Typekit applied, the button will be rasterized, I double checked this and this is not the case, the Typekit is applied to every state.
    Any ideas?
    Please take a look:
    http://mikrosm.businesscatalyst.com/contact.html

    For regular text frames, Muse will not rasterize websafe fonts or webfonts(aka typekit fonts). The form submit button is a special case.
    Browser support for styling the form submit button is inconsistent, so to make the styled button work in all the major browsers, Muse always rasterizes the submit button. Otherwise you'd have some visitors to your website that couldn't click on the button, or had a submit button that didn't look as you intended.

  • Typekit fonts not working after Edge Animate project is published

    Hi, I have added Myriad from Typekit to a Edge Animate project and after applying the font it looks great and even when I 'View in Browser' it works fine.
    My problem is after publishing, the font defaults to it's fallback font (Serif-Sans) overtime in every browser.
    Am I missing a step in the process of publishing?

    Hi Nathan,
    I'm sorry that you ran into trouble with this.  The fonts may not be loading because the published website uses a different domain name than your development site.  Please make sure you have added the published/live domain name to the domain listing on your kit.
    To add domains, go to https://typekit.com/account/kits and launch your Kit Editor. Click Kit Settings in the upper right corner and add your domain to the domains field, then save your settings. When you're done, republish your kit.  The fonts will be available on the new domain within a few minutes of republishing.
    If that doesn't solve the problem, would you share the project URL so we can take a look?  If you don't want to post it on the forum, you can email Typekit Support directly at [email protected]
    Thanks!
    -- liz

  • TypeKit does not work - infinite loading

    Hi folks,
    my Adobe TypeKit does not work: If i launch the cc application and click on "Fonts" (DE: Schriften) the loading bar appears. But the loading never ends. I tried to deactivate Firewall, Anti-virus-program, reinstall Creative Cloud Application, reinstall InDesign. But nothing helps.
    All updates are made. My system is a Windows 8.1 PC (64bit).
    This is how it looks:
    Has anybody an idea to fix it?
    Greetings

    Hi Peter,
    I would take a look at this article: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html and see if that solves the issue.
    Other related forum threads:
    http://forums.adobe.com/message/5468864 (spinning blue wheel)
    http://forums.adobe.com/message/5469306
    I hope this helps. If you're still running into issues, feel free to drop us a line here: [email protected]
    Cheers,
    Benjamin

  • Intelligent barcode font not working in Data Merge?

    Intelligent barcode font not working in Data Merge?
    When using Data Merge I only get a pink box where the code is supposed to go. If I cut and paste the same info into the spot the bar works fine. Anybody ever have this problem?

    It looks like you're working with InDesign, correct? I would try posting your question over in the general InDesign forum: http://forums.adobe.com/community/indesign The folks over there will be able to provide you with more specialized expert help

  • Can't get TypeKit fonts to work in Adobe Muse!

    HI there!
    Just wondering if anybody new how to get purchased fonts from TypeKit to work as HTML in Adobe Muse?
    I have tried following the link below but when I go to publish my site the text is still all images.
    Problem is I know nothing about code but this seemed pretty straight forward to follow but don't seem
    to be getting any luck with it.
    I was trying to use the font 'Museo Sans Rounded' and I was told to try maybe other fonts which I did and
    also they did not work, but If I just take a font from within the Adobe Muse/TypeKit 'Web Fonts' then this works.
    Please could someone explain to me if I'm doing something wrong or if there is a better way of acheiving this?
    Many thanks
    Darren
    www.segmentdesign.co.uk
    http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html

    Hi Liz,
    Many thanks for getting back to me.
    Below are the screen shots of me:
    1. Going into Typekit
    2. Selecting chosen ‘Kit’ and checking that the font ‘Museo Sans Rounded’ is WEB SAFE.
    3. Launching ‘Kit Editor’ and setting the ’Selectors’ > ‘.body’ & ‘.header’ > ‘PUBLISH’
    4. Then I go into Muse and select the ’header' font e.g. I’m a freelance graphic designer &
    illustrator based in Bristol.’ then go to ‘Paragraph styles and highlight ‘header’. I then PUBLISH
    my site only for it to still be an image.
    Am I doing this correctly?
    How do I get the ‘Museo Sans Rounded’ web safe font from Typekit into the window e.g. your screen grab?
    I will have a go at putting Arial font into title and then see what happens from there!
    Many thanks
    Darren
    SegmentDesign™
    Darren James
    Freelance Graphic Designer & Illustrator
    07983 547 028
    [email protected]
    segmentdesign.co.uk
    
> & illustrator based in Bristol" ?
    Instead of choosing a system from the font menu, please try selecting one of the "web safe" fonts that are built into Muse, such as Arial. When you re-publish your site, you should see regular text again instead of the images.
    2) using the font from Typekit
    Once you have text showing up instead of images, we can work on applying the Typekit fonts.
    The kit that you are currently using in your site (ID bnb1odj) doesn't include the font Museo Sans Rounded.  Would you please check in your Kit Editor that you are using the right embed code for your Museo Sans Rounded kit?
    You can find the embed code by logging into https://typekit.com, launching your Kit Editor, and clicking the "embed code" link at the top right.   Copy this code and add it to Muse under the Page > Page properties menu item.
    Please give that a try, and let me know how it goes!  Once you have republished the site, I can take another look and give you some information on how to set the Typekit fonts in your CSS.
    Thank you,
    -- liz
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6237014#6237014
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6237014#6237014
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6237014#6237014. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Typekit font not displaying in iPad DPS app (created by Indesign) in Web Content (Edge Animate)

    I think I have tried every permutation to make this work, but I am probably missing something. 
    I am creating a single DPS iPad app with InDesign, and I am using a Typekit font throughout.  So far so good. 
    I have created an Edge Animate project using the same Typekit font.  In preview mode, it is fine as well. 
    However, when I place the Edge Animate project into a frame in InDesign and use the Web Content Folio Overlay (regardless of whether I use the .oam file or link directly .html output published by Animate), the Typekit font will not show up in the Edge Animate portion of the DPS app and will instead use a fallback font. 
    Can anyone suggest a way to make Typekit fonts in Edge Animate work when embedded in a DPS app?  (For what it's worth, I have the same problem when embedding html output from Tumult Hype, so it seems unlikely that this is an issue with Edge Animate at all and probably has more to do with something in the way the DPS app is dealing with embedded html content.)
    Thanks in advance for any assistance. 

    Believe me, I understand the pain. Unfortunately there's only so much we can do at Adobe as the EULAs provided by the foundries for their respective fonts are very explicit in where you can and can not use them.
    For example, packaging an InDeisgn file and sending it off for pre-press with the fonts included in the package is in direct violation of most font EULAs. In a studio environment, you're only allowed to have a font installed on n number of computers and need to have multiple licenses to accomidate >n number of seats. When creating a PDF, fonts explicitly have to be subsetted before embedding into the PDF.
    That's just to paint a picture of the fragile state of using fonts in print, usage in digital mediums is just another bee in your bonnet when it comes to considering when you can and cannot use a font.
    Services like Typekit Desktop are trying to make this easier by removing a lot of those pain and condierations for you, by blanketing all these fonts under a single license you're free to use for print and the web. There's still some gotchyas, but we're aiming to greatly reduce how much you have to think about it where we can.
    So yes there's a bit of education when it comes to mixing embedded HTML content/fonts with DPS, but at least there's options
    Sarah

  • Typekit fonts not loading in Muse

    Hi, I purchased a Creative Cloud Annual Plan and I can't use the Add Web Fonts dialog box within Muse. I run it on a Win XP pro 64bit SP2, Muse working properly if not for that function.. Dialog box appear but  no command is clickable and error is prompted reading "Could not load web font previews. Check your network connection and try again". Same connection, same sw, on a different pc (win xp sp3) works fine. I searching Adobe kb, faqs and other unsuccesfully finding any hint. Could you please let me know how to fix it?

    Hi,
    Currently, you can only use and preview the free and open-source Typekit fonts in Muse. In the future there will be kit integration, so that you have access to all the fonts in your Typekit plan.
    You can still use Typekit on your website, though; the fonts just won't show up in the Muse preview.  The Muse Insider wrote a post on how to insert the Typekit embed code from the Muse interface:
    http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html
    Or, if you are comfortable editing HTML, you can add the embed code to the <head> tag in your site manually. You can find the embed code by logging into https://typekit.com, launching your Kit Editor, and clicking the "embed code" link at the top right.
    If you have any further questions, feel free to contact us directly here: [email protected]
    Cheers,
    Ben

  • Typekit Fonts Not Syncing

    Typekit fonts are not syncing. I open an Illustrator file I created with CC Illustrator and now it says that some typekit fonts are missing. I go to Typekit and it shows that the fonts are installed for Desktop. I go to CC .app and it says under the Fonts section that "Font sync is turned on..."
    What the heck Adobe?
    Fix this issue!
    I'm tired of all this logging into this that and CC portal just to do work!
    I'm tired of this, really frustrated and tired of it.
    We're not getting our money's worth with all these issues.
    Adobe, you are NOT what you used to be. You've gotten worse, not better.

    Adobe you MUST knock these disruptions off!
    Again, we are NOT getting our money's worth with so many disruptions.
    Fix this stuff so it never happens again.
    Ok, so now I will go out and tweet and FB post to all those who question Adobe... should I get CC? How is CC? Is it worth the money?
    I will absolutely reply to them and tell them NO, IT IS NOT!

  • Typekit integration not working

    Hi, I followed both options of instructions from this post: Typekit webfonts not showing as options in Muse Web Fonts and neither worked. Can you please help?

    Hi, yes thank you!
    I followed the steps listed here: http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html
    Yet when I publish my muse site, the text is exporting as an image, it is not rendering the webfont from typekit. Maybe it has something to do with the error you can see in the embedded HTML box on the top left corner of my muse site?

  • Why does set font not work in report generation toolkit?

    I would like to change font and underline when inserting text into a Microsoft Word document. I have tried using the
    "Set Report Font" vi directly in front of an "Append Report Text" vi in my own application. The inserted text at the bookmark is always in the default text mode
    of the document. Is this a bug?
    I also tried the find and replace vi with the same result. Font will not change.
    I also cannot  find any examples of this usage that work. See example vi file below.
    Save at C:\ or adjust the template location accordingly in the vi.
    Can anyone help me out?
    Thanks,
    Chris
    Attachments:
    ChassisTestAutomatic (6.1).vi ‏39 KB
    TestPlan.dot ‏34 KB

    Dhubbell wrote:
    That's a cool tool Ben!  However, with a bookmark, you know the location on a Word Template, and if you know the location in MS Word, you can then set the fonts you want in Word.
    Do you know how to change the fonts in a string?
    Example, How do you insert this block of text on a SINGLE MS Word bookmark?
    PART NUMBER: 1234567890
    DESCRIPTION:  These lines are formated dynamically, some orders may have 1 PN, and other orders many have 500 PNs.
    I'm formatting my line details and inserting them on a MS Word bookmark.  After the initial bookmark I have no more control of the fonts for the entire string block.  I'd like to dynamically change the fonts in a string and I'd like to use MS Word.  I saw HTML report writing, but, in my particular application, HTML reports will not work.     
    Doug
    I don't have the time to try anything but as a suggestion I would experiment with the range start end properties (e.g. from start =0 to end =
    12 bold is true, from 13 to 23 bold is false, ....) You first insert text without formatting then you use the range start and end to format the text.
    I'm not sure it will work but it's worth a try.
    Ben64
    note: I would create a 2D array of start and end index of your string and auto-index a for loop that contain the range property node.

  • Why are TypeKit fonts not displaying correctly in Pages (iWork)?

    I have just subscribed to TypeKit and am experiencing highly peculiar behavior from the two fonts I’m using in Pages (iWork): Basically, fonts in my document don’t respond appropriately to requested changes in style. For example, if I increase the point size by one point using the the formatting commands built into Pages, the font drops a point size. I’ve had the same experience using the kerning command, where the kerning decreases when I have set it to increase. (So far, the only fonts I’ve been using have been Futura PT and Proxima Nova.)
    Look at the example in the screenshot: “FEATURED EXPERT” on the top line shows in Pages as being 24pt Futura PT Book. However, “SOLO,” a few lines down, which is definitely displaying as smaller, shows as 25pt Futura PT
    In a potentially related issue, when I reopened this same document today, text boxes were suddenly too small for the text (again in Futura PT and Proxima Nova). It was as though Pages was suddenly reading those two fonts differently.
    I have had no issues with other (non-TypeKit) fonts in the same document.
    Anyone else experiencing anything similar? Any suggested fixes? I'm reluctant to unsync/resync the two affected fonts (the only ones I have sync'd to date) because I don't want to wreck the document!

    Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
    The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
    At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
    This was not an isolated incident.
    If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
    However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
    This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of  a fix that will allow the CC app to self-correct when the wifi signal is restored?
    Any assistance will be appreciated! 
    Thanks!
    P.S. TypeKit troubleshooting doesn’t address this particular issue.

  • New fonts not working in photoshop...

    I have installed new fonts on my mac but they will not work in Photoshop.. can somoene help me? I don't know if I have done something wrong or need to take another step.. I am running CS4 and OS 10.6.4. The message I get when I try to use a font I recently installed is "Could not complete your request because something prevented the text engine from being intitalized." Any help would be greatly appreciated!
    Lisa

    Most likely you have some corrupt fonts installed.
    Try validating the fonts using FontBook to find the most obvious problems.

  • Armenian Mshtakan font not working in MS Word

    Hello,
    I am able to use the Armenian Mshtakan font on a Macbook pro using OS 10.7.5 only in Text Edit.  It will not work in MS Word.
    Is there any way to get Mshtakan font to work in MS Word for Mac?  Currently using MS Office 2011.
    Microsoft's website states that it does not support custom fonts due to security issues, and yet there are some custom fonts that DO work in
    Word,  Does anyone have any ideas on how to get this to work?
    I've tried clearing the cache file for MS Office Preferences, tried copying the font in fontbook to the Microsoft fonts folder. None of these things have worked.
    Thanks!

    I've got the same problem.
    Have you found the solution yet?

  • Copperplate Gothic font not working in some versions of Firefox

    Copperplate Gothic font not properly working in some versions of Firefox. whereas perfectly working in remaining browsers. when I follow the instruction and Restart Firefox in Safe Mode, the problem does not happen in Safe Mode. According to instruction for Troubleshoot and diagnose Firefox problems, If problem not occur in Safe Mode, it is most likely because of hardware acceleration. when I Turn off hardware acceleration, the problem is no longer happening, then hardware acceleration is likely the cause of this issue. How i can fix this issue for Firefox on deployed site without changing font.

    Does Firefox use another font instead?
    If this is the case then which font?
    You can use this extension to see which fonts are used for selected text.
    *fontinfo: https://addons.mozilla.org/firefox/addon/fontinfo/

Maybe you are looking for