Typelag happens in big projects. AKA 38,325 lines of code.

My machine runs very fast in all other applications, it is a gaming computer that runs Starcraft 2 smoothly on the highest settings.
I'm writing a very big application in Flash. It is well on its way to being a MMORPG. I have hundreds of classes, but my biggest class has really off the charts type lag. My biggest class is 38,325 lines of code.
Now every time I type, it tries to highlight words in grey for some reason. I think every letter I type, it searches the entire 38,325 lines of code for that word in order to highlight all cases of it.
take a look at this picture and how "hud" is highlighted
LINK: http://www.goodnewsjim.com/images/slowdown_FB4.png
As I move the cursor around and edit, I often times get 1-5 seconds of slowdown, sometimes I even get 20 seconds of type lag where the Flash Builder temporarily says "Not Responding in the window bar". This happens all of the results of me typing letters, moving arrow keys or pressing delete or backspace.
For small edits, I can wait 20 seconds to edit one word, but when I work a lot on my code, I have to open an external editor like Scite, but the alt-tabbing consumes time, and there is a mouseclick to reload the .as file. I would like to use Flash Builder 4 for editing my code, after all that is what an IDE should be able to do if anything. An IDE should at the very least be no worse than a generic text editor.
Please tell me how I can disable Flash Builder 4 from trying to highlight words in grey. I think this is what is causing my typelag. I've turned off code hints.

Anirudh,
Thank you again for your quick response.
1) I already disabled Code assist completely in Window -> Preferences -> Flash Builder -> Editors.
2) Ok, I did toggle mark occurances off.
The problem still persists. I still have type lag.
,Jim

Similar Messages

IMovie only show background music after connecting to my external iMovie Mediathek, no video!!! desperat, i potentially lost a big project...

I work with an external iMovie-Mediathek so my big project don't mess up my macbook. I was working on a big project (45 min.) after the program crashed. Now, when I try to connect again to the external Mediathek, it will only show the background music I used, no video material at all... !!!!!!!!!!!!!!!! But in the "events"-section, it looks normal with the preview just like always during the last couple of days... It even shows the size of the file with 146GB (which is correct), but still only the music is displayed (about 7 tracks).
I need urgent help. Same thing happened to the security-backup I make regularly...

Here's a picture of the iM window. 3 Projects available but only 2 desplayed? HOW I GET MY 3rd PROJECT BACK????

How can I deploy only one package out of a big project?

Does any one know how can I only deploy one package out of a big project?
We have a project which includes about 12 differenct packages. Is there a way in Jdeveloper for me to create a deploy profile to only deploy one package to a *.jar file?
Do I have to re-create a new project ( that's what I am doing currently) simply for deployment purpose?
By the way, click and pick class from more than 100 classes is too much of work. In addition, you don't really know exactly which class you are picking if two classes (in different packages) have the same name.
Thanks a lot.

Rename your LCA file extention into .ZIP
Open the ZIP file in any of the compressing utility (e.g. WinZip, WinRar etc.)
Extract the desired process and deploy it manually to your server.
Nith

Final cut prox crashes as soon as I click export. It happens with every project, even small 10 second test videos

FCPx crashes as soon as I click export movie. It happens with every project. It happens even on a small 10 sec test video. I have been using FCPx for over a year with no problems, but today this is happening. I am suspecting a virus or something. I have done nothing new to change any settings. Should I uninstall and re-install?

Hi there,
First off, the point of converting is to make your rendering times nonexistent, not longer. Make sure you're converting to match your sequence settings exactly.
You might try basic troubleshooting procedure described here:
http://fcpbook.com/Misc1.html
If it happens again you should remove all components of the application using the free FCS Remover and reinstall.

Several small projects under one big project

Dear Gurus,
Can several small projects be created under a big project?
Similar like what we do WBS under the WBS or activities for that matter?

Hi,
Yes, You can. Please go through this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/40/437f8c2dc111d2a62400104b59c1ec/frameset.htm
Hope this will help you.
Regards,

Organising a big project with sub-projects

So ,I'm laying out my project now, very large. Easily over 1000 topics, about 1000 images, some embedded, some not, variables all over the place etc., and this is for our generic help file.
I'm thinking of how to proceed with the other versions of this that will come in the future, i.e client specific help files with some sections removed that aren't relevent, images changed etc.
Just wondering what people think.
a) create a new project for each client iteration of the help file and share topics, variables etc using the resource manager? (this is what it is used for correct?)
b) leave everything in one large project, remove topic in each TOC before publishing and maintain everything in one place.
Both are good ideas, maybe. if I have different projects, then I manage things individually and keep prject sizes low and organised. If I keep each topic in one place I don't have issues with importanting resources, keeping them all shared properly and potentially losing things and everything is centralized, though things could become very big and maybe RH will start to slow down......
I also worry about the Resource manager and where its storing things that I import into it, and if they are lost/corrupted then other links etc might die also....
cheers.
Nick

"ah ok then, so to achieve output where I want some topics in and some not I need to use the conditional tags, and basically I have to apply conditional tags to every topic..."
Not exactly.
To control "some topics in and some not," different TOCs and different layouts can each be used, in addition to conditional tags.
And no, you do not "have to apply conditional tags to every topic." As Peter said, topics with no conditional build tag will be included in every output. You might find variables to be more useful if you're looking at branding or versioning issues (the rest of the topic is identical for every output, and would not need conditionalizing).
Your best bet is to investigate what the output demands are currently, and what they might morph into in the near term and long term, such as whether context-sensitive help will be needed, whether print versions will be supplied, etc. You might find that the largest percentage of topics will appear in every output, with each of them containing a smattering of variables, snippets, and conditionalized segments of content (different screenshots, tables, etc.). You might even structure a merged help project so that certain outputs would eliminate entire project folders.
Bottom line: one solution is usually never the way to go...be good to yourself, and use all the features that RH offers. But again, do your homework now, to save yourself untold grief later on.
Good luck,
Leon

After mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please

after mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please are there any settings i need to alter as it seems the wav or mp3 file i ceated is being converted to a data file somewhere between the folder and disc drive

Same thing for a movie file.. If you want to play back the movie via a DVD and a DVD player you must create a Movie DVD and not just burn files to a data DVD... as Data DVDs are just storage devices for files and therefore will only work with computers...
Movie DVDs are special formats that include things like menus and special file formats.. so they can playback via a DVD Player...
You will need a 3rd party DVD Burning app like Toast which is what i actually use.... or the more popular DVD Creator app...to create and then burn a Movie DVD that will playback on a DVD Player....
https://answers.yahoo.com/question/index?qid=20101220205435AA70beb

Handling a big project - advice needed

Hi
I am using Premiere Pro CS4 to edit 1920*1080 AVCHD footage (3 hours in total) shot with a Canon HF10 camera. In that matter I have a three questions:
1) Since I don't have a Blu-Ray burner in my PC yet, I am chopping my movie up into several parts each with a length of approximately 30 minutes, so I can burn some DVD's with the movie. My question is then: How do I do this the easiest way? Do I make 6 different projects and edit the movie as if it was 6 independent movies, or is there any better way of doing this?
2) And how do I merge these 6 parts in one, which I will need when I get a Blu-Ray burner?
3) Would you think it is a bad idea to make such a huge project? I have tried several other programs to edit AVCHD with no luck - the programs always crashed at some point, so I am a bit nervous if a 3 hour project would be too huge to be handled properly even though Premiere Pro CS4 looks to be working good. So far I have been able to transcode 30 minutes footage to a DVD with success using Encore (haven't tried more yet). Then I burnt the ISO to a DVD with some freeware program and it looked amazing when I played it with my BD player.
In case you want info on my hardware I give it to you here:
Intel Core2Quad Q9450 2.6Ghz, 4 GB Memory, 1000GB Samsung F1 HD, GF8800GTS 512MB, Windows Vista Ultimate 32Bit
Please tell me if I am unclear about something or need to give you more information.
Thanks in advance :)

That AVCHD footage must be ***** to edit.
My P2 dvcprohd files are a gig a minute yet I get realtime playback with video's on 2 channels fullscreen uncompressed using a computer with just slightly higher - but almost the same - specs as yours. Using just a single SATA 640gb WD and my files are 4 times the size of your AVCHD files.
Hell now I can even playback the footage in After Effects realtime fullframe with now FX (something that comes in handy because I can use AE as my NLE if there isn't to much sound involved)
With big projects you need to split it down to 10-17 minutes parts. Once they get longer than that Premiere becomes sluggish. It's no problem putting all the 'projects' in to a feature length timeline just don't expect to do much editing when it's put together because it'll be real sluggish.
Render to an uncompressed still sequence because you can always restart where the render stopped if it crashes (and it's more likely to the bigger the project).
I'm finishing a feature that way and it's worked great all on CS4 (not that I'm happy with Adobe about Premiere CS4 at all). But I had around 20 hours of rough footage and with duplicates it's 4 terabytes or so.

I am working on big project and in accidentally flatten the file and i saved it as PSD in then I exited Photoshop. the next time when i open the file it is merged on one page. please help!

I am working on big project and in accidentally flatten the file and i saved it as PSD in then I exited Photoshop. the next time when i open the file it is merged on one page. please help!

Flattening and merging are very similar. The main difference is merging keeps the transparent areas, whereas flattening removes all transparent areas by giving it a white background. A good example of flattening is a jpg image.
Since you have closed the file by closing photoshop, that means that the history is now gone, no way of undoing.
So that leaves you with two choices.
You can either recreate the whole document.
Or you can make selections of areas you are keeping and moving them one at a time to new layers. Keep each object on a separate layer. Then redo the area behind those objects.

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

Also, if you can't get them to work, what is the error message you are getting?
Baron Samedi

Big project done by oracle ADF

hi everybody,
did any one know some big project done by oracle ADF ??
is there any demo online ??? it will help me a lot to convince my manager to work with oracle ADF ;
thanks.

demo application:
http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html
run demo:
http://www.oracle.com/technetwork/developer-tools/adf/documentation/adf-faces-rc-demo-083799.html
sample adf demo:
http://jdevadf.oracle.com/adf-richclient-demo/faces/index.jspx;jsessionid=1Qt3TbPQ1kJpntmbjDznCvj32mWqkmtyQNkCd0yq5HN3YPf7v1Pk!-2111346381?_afrLoop=2626702636812537&_afrWindowMode=0&Adf-Window-Id=w0
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/tree.jspx?Adf-Window-Id=w15&_afrLoop=725443835824416&_afrWindowMode=2
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/treeTable.jspx?Adf-Window-Id=w16&_afrLoop=725446135224429&_afrWindowMode=0
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/brandingBar.jspx?_afrRedirect=724564639942429&_afrLoop=724611806862216&_afrWindowMode=0&Adf-Window-Id=w6
http://sd4itapps.com/sddemo
skining demos:
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/index.jspx?_afrLoop=45586601071161272&_afrWindowMode=0&_afrWindowId=null
Form Visual Design Demo
http://jdevadf.oracle.com/adf-richclient-demo/faces/visualDesigns/formLayout.jspx
demo summit adf app videos
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/SummitADF/SummitADF.html

Breaking up a big project

Hi
I read in a posting some time back that a neat way of 'breaking up' a big project would be to export sections as avi movie clips and then re-assemble the movie clips to burn a DVD. Would there be a degredation of the quality or loss of video resolution in going about a project in this way? Thanks, John Mathias

There might be a slight (negligable) degradation in clips which have had content changed (eg subtitle added, brightness or contrast changed, etc.), but if you start with DV AVI and export to DV AVI with the recompress flag unchecked (checked by default), then unaltered frames should pass through exactly the same.

Getting a very big project into one DVD

Hi,
I got a really big project which according to encore needs 8.5 GB.
I want to put it on a 4.5 GB DVD.
I tried transcoding it different and do "fit" but nothing helps.
I don't really mind the quality, I just want it to get into one DVD.
What do I do?
Thanks.

>2nd is they use multi-pass encoders that cost WAY more than what you have invested in your entire computer hardware and software... there was a recent message somewhere (I'm not going to look) that mentioned a NINE pass encoder
Cinemacraft CCE-SP. Their basic version is cheap, at $79. The next one is around $2,000 and has up to 99-pass encoding available as well as a feature that will allow you to set timecodes and encode the sections between each timecode reference with different settings too. It uses what they call "Adaptive Quantize Matrix" encoding, which creates a reference file, and begins to encode and after the third pass, it will continually refine the process on a sub-pixel level until it gets the finest possible quality. It's awesome, and takes a LOT of learning.
See http://www.cinemacraft.com/eng/sp2.html
This version is small potatoes indeed to what they call their "serious" encoder, which is unpriced unless you contact them directly.
http://www.omni-cinemacraft.com/products_cinemacraftxtream.shtml
If you have to ask, you can't afford it.
Sonic Solutions also do an HD/SD encoder called CineVision, which is a wallet-busting $50,000 a go.
MPEG encoding is an art - even more so than cutting & editing film in the first place, and the big players employ encodists who just do this - all day, every day. You are never going to get the same quality from a sub-$500 2-pass encoder.

Physical control in big projects

Dear Gurus,
I am in a project of implantation SAP ECC in a company of the mining segment.
In this company has Big Projects of CAPEX, today is used the Software Primavera.
The premise is to try to substitute "Primavera" with the component PS, the projects can have around 50.000 item between WBS´s, Activities...
We will have problems in the operation of the ECC and performance...
Somebody already lived this problem?
Regards
Elza
Edited by: Elza A.Silva Bispo on Jul 30, 2010 2:14 PM

Hi,
In this regard, it advised you refer SAP Notes no.206264 on limit in size of projects.
As per SAP, it is recommended that you may try to break your huge project into small projects, if possible, keeping prescribed limits of max. of 10,000 WBS Elements and 10,000 Activities (incl. Act.elements).
With huge project sizes, performance may be affected not only in PS area but also may lead to the performance issues for other areas which have direct link with the Project elements.
Regards,
Vasu
Edited by: SAP_PS_2010 on Aug 1, 2010 5:05 AM
Edited by: SAP_PS_2010 on Aug 1, 2010 5:08 AM

Rendering big projects

In FCP,is it possible render big project using more then one mac? (share render)
thx

Rendering the Timeline - no.
Transcoding to other formats (often mistakenly called rendering) using Compressor and Qmaster -yes.
Read the "Distributed Processing Setup" manual that accompanies Qmaster. Depending on which version of FCS you have, you might have a printed version. In any case there is an identical pdf in the application's Help menu bar item.

Typelag happens in big projects. AKA 38,325 lines of code.

Similar Messages

Maybe you are looking for