TYPELOAD_NEW_VERSION error system is dumping for billing cycle

Hi Folks
Whenever the users run the billing cycle(T-code VF04), the system is showing a dump with this error TYPELOAD_NEW_VERSION. In the short statement of dump, it says:" A newer version of data type "VBRK" was found than one required ".
Will be waiting for your valuable opinions on this issue.
Regards
Waz

Hi,
Have you put a new transport in for the data type recently ?
Sounds like the SAP dictionary has changed and the users are using the old one.
Are you running an multi server prod landscape ?.. E.G ;  CI + apps
Try syncing the buffers on each of the apps if you have.   /$sync
Mark

Similar Messages

  • Error in accounting document for Billing - Costing Key does not exist

    Hi,
    We had activated COPA for updating Record Type - A (Sale Order) and Record Type - F (Billing Document).  Subsequently we have removed all the settings done for Record Type A (Sale Order) including Costing key.
    Now after this change we get the error of "Costing Key XXXX does not exist" during generation of accounting document for Billing.
    Can any body suggest how to over come this error without creating costing key of Record Type A (Sale Order).
    Regards,
    Ela.

    Hi Ela,
    Please use T. code KE4J and remove Costing Key from record type F( Billing) then system wonu2019t look for Costing key during releasing billing document to accounting & use T. code KE40 to correct Costing key settings  if required.
    Regards,
    Shailesh Verma

  • Dates for billing cycles

    Does my billing cycle start on the day of my purchase and end on the same day of the next month?
    If I don't use some of the minutes on my plan, do I lose them or do they roll over?
    If I have a plan that starts, for example on the 15th and I use all my minutes by the 10th of the next month and purchase a new monthly plan on the 10th, does the new billing cycle start on the 10th?
    Thanks.

    Hi,
    == https://support.skype.com/en/faq/FA10414/how-do-subscriptions-work ? ==
    Hth
    On ne regarde pas l'avenir dans un rétroviseur !
    IMac Intel Core i3 3.2 GHz - RAM 12 GB - OS 10.10.3
    Skype 7.8.391
    Logitech usb headset or Jabra 250 bt

  • "not known error system" saving metadata

    very often, but no always, when I save metadata in the file, appear an "not known error system" message

    Hi, thanks for reply,
    I use mainly raw files,
    Giancarlo Majocchi
    cell +393356263390
    www.buildup-it.com
    Inviato da iPad
    Il giorno 17/mar/2014, alle ore 13:19, Tony Jay <[email protected]> ha scritto:
    Re: "not known error system" saving metadata
    created by Tony Jay in Photoshop Lightroom - View the full discussion
    Hi welcome.
    Are you able to furnish information about which files metadata is being saved - RAW files (XMP sidecar files in reality), JPEG, TIFF, PSD etc?
    Are there any patterns to this error message appearing?
    Tony Jay
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6216084#6216084
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6216084#6216084
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6216084#6216084. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Why do I have to pay for a charge that I should not of been charged then wait for the credit in two to three billing cycles? If I don't pay it I get charged $5 a month late charge?

    So I spent a considerable amount of time on the phone with Verizon about charges on my wireless bill. The conclusion of it was: Pay the charge and we will credit the charge or it will show as a balance due with a $5.00 late fee every month. I got two phones on a promotion in November. Part of the promotion was no activation fee. Got my first bill and a $70.00 activation fee was on it. On line chatted with Verizon and they said it would be credited in two to three billing cycles. I paid my bill minus the activation fee. This month I have a $5.00 late fee and a $35.00 restocking fee because they messed up and sent three phones and I returned one. It was not activated. They might credit me that money back. What is going on?????

        I am so very sorry for any aggravation you've experienced getting your billing straightened out, Nunu1957. It's true that it can take 1 to 2 billing cycles for some account balance adjustments to appear on a statement. While I know you'd rather not have paid your activation fees, the terms of your agreement do require you to do so in order to avoid late fees or even involuntary service interruptions.
    I am concerns about the restock fee. If the device was sent to you in error, you should not have been billed a restock fee. You stated that there may be a refund for the fee. Has that been confirmed?
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Error - Creation of Billing Document - Item is not relevant for billing

    Hi
    While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar
    No Billing Documents were generated. See log
    The Error Log shows the following msg with Yellow coloured indication :
    000000xxxxxx 00010  The item is not relevant for billing.
    Technical Data
    The Technical Data shows the Client
    Group Number
    Sales Document Number
    Item Number of the SD Document
    Schedule Line Number
    Counter in control Tables
    Message in Identification                        VF
    System Message Number                       044
    We need to issue the credit note. 
    How to solve this issue?
    If any onw knows pls guide me.
    Regards,
    G. BHASKARAN

    Hi friends,
    I checked with existing Sale Order and compare with this S.Order.   I found the following:
    Reason for rejection column selected by "XXXXXXXXXX" - for Curren Sales Order
    Reason for rejection column emply - for existing Sales Order
    I removed the contents and kept it blank.   Then we can create billing document as well
    Cr. Memo without any problems.   Document posted.
    Thanks for your valuable suggestions and guidance to get some idea.
    Regards,
    G Bhas

  • Special G/L transactions not defined for bills/exch.and down pmnts ERROR

    Dear Experts,
    I am trying to park document via F-63 - Invoice Parking - General  to park  down payments made to vendor using following details in initial screen for F-63:
    Posting Key_____29
    Account number _1000
    SGL Ind ________A
    after pressing enter key the system prompt error message that is:
    Special G/L transactions not defined for bills/exch.and down pmnts
    Message no. FP030
    Diagnosis
    You have selected a posting key with a special G/L indicator of type 'Bill of exchange', or 'Down payment'. Document parking is not defined for special G/L transactions of the type 'Bill of exchange' or 'Down payment'.
    System Response
    Document parking cannot be carried out.
    Procedure
    Select a different posting key or special G/L indicator. If the posting is a 'One-time posting' to a rent contract, select a different transaction type or post the document directly.
    HOW CAN I PARK DOWN PAYMENT DOCUMENT FOR VENDOR. KINDLY PROVIDE SUITABLE SOLUTION.
    REGARDS

    Dear,
    Your special G/L "A" is set as Down Payment/Down Payment request, this is what cause the error.
    To meet your requirement just go to FBKP select special G/L "A" enter your chart of accounts and go into properties, change
    Special G/L transaction types to Others from Payment/Down payment request.
    Advances can be created as Special G/L transaction types Others
    If parking is utmost required by you then according to me you should create two special G/L for Down Payment. New created should be used for parking and default by SAP you can use with functionality like F-47, F-48, F-54.
    System is stopping you because down payment functionality is provided exhaustively in SAP so you should follow that.
    Please analyze the process exhaustively and implement to smoothen your process.
    Regards,
    Chintan Joshi.

  • ABAP Dump Error - System error in program RSMDATASTATE

    Hi Experts,
    We have a Process Chain which loads data, fills aggregates and does a rollup.
    Suddenly last week , the rollup step failed giving a error: No filled aggregates for the Cube
    We ran the Program SAP_AGGREGATES_ACTIVATE_FILL.
    After running the Program, the rollup happened for one day but again today while performing rollup we are encountering a ABAP dump.
    The error analysis says: System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-
    We checked the SAP Note : 858671, but we are not sure about the support packs.
    Please Help.
    Vivek Das Gupta

    Hello.
    Did you check note 1094948 if it was applied? Please apply this note and retest the report.
    Thanks.
    Walter Oliveira.

  • Error while SO Invoice 'The Item Is Not Relevant For Billing'

    Hi Colleagues,
    I have created a Time and Material Project and when I am trying to Invoice the SO related to particular Project request getting below Error.
    Errro Description :-
    "The item is not relevant for billing"
    Schedule Line Number 0044
    Counter in Control Tables 00
    Message Identification VF
    System Message Number 044
    Output Type I
    Message Variable 01
    Message Variable 02
    Message Variable 03
    Message Variable 04
    Group Type F
    Background :-
    I created a Project
    Entered the time sheet
    Run CATS :- Transfer to Project system
    Display actual cost line items
    Run RRB and created billing request
    In the time of Invoicing SO getting error.
    I have checked all the configuration but unable to sort out the problem.
    Please suggest me if I missed something or need to change the configuration.
    Thanks in Advance
    Regards
    Manoj Bansal

    Hi Venu,
    Thanks for you reply..
    1. I have maintained Billing Relevance "C"
    2. Copy Control Setting is sound good.
    3. There is no billing block on SO.
    4. We have CndType line item :- EKO2 and Billing Type :- 02.
    Please let me know if any further setting is required.
    Regards
    Amitesh

  • BW: Not getting Dump For Program error in Process Chain

    I have one issue regarding Master data loading issue in BW(3.5).
    My business flow like we have received data from server A and Server A extract data from Server B and
    Server B which is extract data from source(R/3).
    Flow like this R/3-->Server B-->Server A(ETL) -
    > My Server.
    We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
    Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
    But lastdays process chain paticular process stills remains yellow?
    We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
    Note: it will be helpful for me  if any one know how to check dump for program errors in Process chain as narated issue.

    Guys, I am also facing the same issue.
    When DTP is completed successfully, it has the job log blow :
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
    Job finished
    When it fails or remain yelllow for long time and then turn into red.
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    EXTRACTION OF DATAPACKAGE 000001
    EXTRACTION OF DATAPACKAGE 000002
    Job finished
    The question is, why the program  RSBATCH_EXECUTE_PROZESS is not scheduled.  Is it because there is no free resource? Or poor response from SAP ECC?
    Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
    Regards
    MultiABAP
    Edited by: MultiABAP on Oct 6, 2010 10:32 AM

  • 2 hours left in billing cycle and I am charged $15 for overage data of 0.01 gigs.

    Hello,
    I find it impossible to understand how a company can charge an extra $15 for another gig of data when I hit my data usage with less than 2 hours left in my billing cycle. On multiple occasions I have been told that the information online about data usage is not 100% accurate so I feel as though there should be some leeway in these charges.
    Additionally, the $15 I paid gets me literally nothing since my billing cycle will be over in less than 3 hours and that data does not roll over. You are taking my money and giving me nothing.
    I can not wait to leave your service in a year and move over to a company that has realistic policies. I've been a customer since before 2002 and I'm done with the terrible policies.
    I've never been so unsatisfied with a service provider.

    Stayccoob wrote:
    Hello,
    I find it impossible to understand how a company can charge an extra $15 for another gig of data when I hit my data usage with less than 2 hours left in my billing cycle. On multiple occasions I have been told that the information online about data usage is not 100% accurate so I feel as though there should be some leeway in these charges.
    Additionally, the $15 I paid gets me literally nothing since my billing cycle will be over in less than 3 hours and that data does not roll over. You are taking my money and giving me nothing.
    I can not wait to leave your service in a year and move over to a company that has realistic policies. I've been a customer since before 2002 and I'm done with the terrible policies.
    I've never been so unsatisfied with a service provider.
    Does your bank offer you leeway if you spend more money (write checks) than you have in your checking account?  THey charge you an overdraft fee, and in most cases, they also return the check that put you over your balance without paying it.  AT&T can not take the data back once you've used it, so they charge you a fee and you get to continue to use data.  The alrenative would be for every time you wanted to use data for every tower to check back to the billing system to see if you have enough available data.  This would slow down every internet transaction you tried to perform, but it would allow the usage meter to be much more accurate.  There are more people who are willing to accept the overage fees than there are willing to accept the slower service just to prevent an occassional overage fee.  If you are constantly going over your data plan, perhaps you are not on an appropriate data plan for your usage and should consider getting a larger data plan.

  • Error Specify a value for variable-Abort System error in program SAPLRRK0 a

    Dear Experts,
    Could anyone help me to fix this issue?
    I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
    The error message is
    Error Specify a value for variable ZR00**
    Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
    Many thanks in advance.
    Regards.
    Krishna.

    Hi Kishor,
    try runnig the same query in RSRT, with execute and debug option.
    Also check in query designer for its correctness.
    Hope this helps...
    Regards,
    umesh

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • Keychain error -25299 occurred while creating a System Keychain entry for t

    Keychain error -25299 occurred while creating a System Keychain entry for the username “Angela Rosario” and URL “afp://Angela%[email protected]/Data”.
    I keep getting the error above every time I try to set up my time capsule
    Could use some help?
    Mahalo

    Same here.

  • Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal

    Hi All,
    I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
    #mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
    I am getting the error
    Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
    Please anybody can help me to resolve this problem.
    Thanks in Advance.

    How large is the device that you are formatting?
    The default journal size depends on the type specified. If none specified,
    then it assumes "mail" which sets the default journal per slot to 256M.
    If database type, default is 64M.
    Use "-T database" to specify database type, etc.
    BTW, one can always override the defaults. Say "-J size=16M" to make
    a smaller journal.
    man mkfs.ocfs2 and the user's guide has more.

Maybe you are looking for