Types of Auctions in SRM 7.0
Hi !
Anyone know what types of auctions standard exist in SRM 7.0?? I know that there is a Dutch auction, but there is another type that supports SRM 7.0 like...English auction or Sealed first-price auction???
Thanks for your support
Hello ,
Kindly refer to the below links for more details. I hope going through these links will answer all your queries.
http://help.sap.com/saphelp_srm70/helpdata/en/46/6e06b4c446468ce10000000a114a6b/frameset.htm
Auctions in procurement
Buy-Side Dutch Auctions: Commodities, Tulips, and the Bubonic Plague
http://help.sap.com/saphelp_srm70/helpdata/en/46/6e06b4c446468ce10000000a114a6b/content.htm
Best Regards,
Rahul
Similar Messages
-
Live auction in SRM 5.0
Hi experts
is there someone who has documents about Live auction in SRM 5.0
Thanks
AndreaHi,
There are n number of technical settings to completed to get this working. The LAC installation guide (SRM 5.0) can be downloaded from here SMP:
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065942&_SCENARIO=01100035870000000202&_OBJECT=011000358700001812602004E
Hope this will solve your problem.
Regards
Kathirvel -
Forward Auction in SRM 5.0?
Hi,
Is forward Auction is available in SRM 5.0. Currently we are using Reverse Auction. Is there any concept like forward auction in SRM 5.0. If so wr we have to change the setting.
Please let me know..
Thanks
Venkatesh PForward Auction not possible in SRM 5.0
Its available in SRM 7.0
Thanks,
Manu -
Transaction types(PO types) not visible on SRM 7.0 portal
Hi all,
We added transaction types in the SRM 7.0system.But these are not reflecting in the SRM 7.0 portal.
Under Purchasing role ->create Documents -> Purchase order .
Once I click on the purchase order it is giving a table with columns PO type and PO desc.
and showing a message the table does not contain any data.
But SRM consultant added the transaction types(PO types) in the backe nd.
Is there missing configuration steps?
Thanks and regards,
RajeshHello Rajesh,
Few more pointers, if works:
1. Check the roles, sometimes security restricts role by document types.
2. Extended classic scenario is activated.
3. As a standard, there are 3 purchasing tabs in SRM 7.0 for buyer depending on portal roles, ECC, SRM & harmonized role (ECC & SRM), Check if you are trying to create PO in SRM/Harmonized role purchasing tab & not in ECC. Easiest way to check is you will have shopping cart POWL visible in SRM purchasing tab.
Hope this helps.
Thanks
Ashutosh -
Not able to see Enhanced Data type in SPROXY in SRM
Hello Experts,
We are planning to use an outbound (SRM to PI) Proxy between SRM and PI to send XML messages. Our SRM team has requested a Datatype enhancement of SAP's predelivered SCV, SAP SRM SERVER 7.0 component i.e. RFQRequest. So, In ESR we have created a new Enhanced data type based on RFQMessage (SAP's pre delivered datatype). I've added their (SRM team's) 6 extra elements to this new Enhanced Data Type, RFQMessageExtension. And, saved and activated it.
Now, to generate the Proxy I went into SRM -> SPROXY, but I donu2019t see my Enhanced Datatype, RFQMessageExtension. Please let me if you've come across this problem or know the solution. I was following this blog [/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner|/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner]
Thanks,
MayurHi Mayur,
Have you read this article?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d
Regards,
Ravi kanth talagana -
Type of link between SRM and MM-SRV
Hello experts,
I would like to know how link SRM and MM-SRV?
You could mail me at : [email protected]
Best regards.
Mimoune RABHIplease refer to the note
Note 868192 - Consulting solution: SUS-MM (SUS-MMSRV) service procurement.
and also the following notes would be of use to you
1028264
982871 -
Live Auction's jCO RFC connection to SRM is NOT successful.
hi to all,
can any one help me about the configuration of RFC of live auction cockpit?
i have followed the inst guide, but i always keep getting this message.
RFC Error using locale en
RFC Error using locale ja
RFC Error using locale de
Your RFC connection between Live Auction and SRM has failed. Please verify the following:
Did you configure your SRM jCO setting (eg: jco.client.ashost, jco.client.sysnr etc) in Live Auction's properties?
Is the user specified in jco.client.user property exist in SRM with the correct role and password ? Please change the user to type dialog and try to logon via SAPGUI before changing it to communication user to ensure the user is NOT locked.
Did your SRM R3 has the code page installed that are specified in jco.client.lang ?
Please check the J2EE engine's log file to see more details of the error. Please refer to J2EE's documentation on how to view the log files.
thanks in advanceHi Ranin,
Have you checked the note 1593439 where it mentions:
If you are using Live Auction JAVA, you would additionally be required
to assign the Authority object S_RFC to the RFC user being used for
establishing a JCO connection between LACWPS JAVA Server and the SRM
ABAP backend system with the following values. This authority is not
needed in case you are using Live Auction on ABAP in SRM 7.0 Enhancement
Pack 1 (SAP SRM 7.01) or higher release.
Object Field Value
S_RFC ACTVT 16
RFC_NAME BBP_LA_BIZAPI
RFC_TYPE FUGR
Perhaps this is the problem?
Regards,
Jason -
Dear SRM experts
While creating a Auction in srm 7.0 what are the necessary fields i need to update ?
Under item data tab what is the use of reference price, Reserve Price and Bid decrement amount..
Can some one explain the procedure to create a Auction in srm 7.0
Thanks in advanceHi,
To configure the punch out catalog, go to the path: SPRO > IMG > SAP SRM > SRM Server > Master Data > Content Management > Define External Web Services
Go to New Entries, enter the Web Service ID, Description and choose Bus. Type as 'Product Catalogue'. Enter the BP number of the supplier in the Business Partner field. Rest of the fields in the form are optional.
Double click on the 'Standard Call Structure' and maintain the call-structure as follows:
Seq
Parameter Name
Parameter Value
Type
0
URL
<URL >
URL
10
loginID
<Login ID>
Fixed Value
20
loginPwd
<password>
Fixed Value
30
HOOK_URL
Return URL
40
~OKCode
ADDI
Fixed Value
50
~Target
_top
Fixed Value
60
~Caller
CTLG
Fixed Value
80
returntarget
_parent
SAP Field
Hope this helps
Cheers,
Yateesh Hoblidar -
SRM - condition types of central contract not copied to ERP (CentContract)
Hi,
When I add several condition types to a contract in SRM (updating). After releasing the condition types are not updated in the contract in ERP.
How can I resolve this. Is there an OSS note?
Regards,
Alexandercondition types are copied from SRM to ECC
-
Hi all,
What are the diffrenet MM movement types which are used in SRM??
I am new to SRM and MM hence asking this very basic question,.PLease advise.Thanks ganesh...
> Hi,
>
> The following Movement types are associated in SRM
>
> 1. Create confirmation in SRM -Will create Movement type 101 in the Backend(ECC)
- Which document cretaed for movement type 101 in ECC???
> 2. Create Return Delivery in SRM -Will create Movement type102 in the Backend (ECC)
- Which document cretaed for movement type 102 in ECC???
> 3.You can create a reservation for the Direct material procurement in SRM --Creates an movement type 201
- For direct material,reservation i created in SRM rt?
> In SRM Org structure you have to define movement type : 201
>
> For the other movement type 101 and 102 there is no maintenance in SRM. It will be taken care in ECC 6.0
>
> -
Coding language for SRM & information required about Japanese auction
Hi ,
Kindly let me know the programming language for SRM and in particular about the auctioning module of SRM.
Also can we customise the code to provide japanese auction in SRM or auctioning module.
ThanksNot answered.
-
Hi Gurus,
How to get the material type in SRM? If we enter the material in the product field in the shopping cart, based upon the material type some validation needs to be done in the shopping cart.
Please advise if anybody is having any clue.
Thanks & Regards,
AswiniHi,
Now I got to know how to get the material type in SRM. Would like to share the information.
Material along with the material type get replicated into SRM from R/3 system. In COMMPR01 transaction, we can search for the material by entering the number in the product id and then it will show the detail information. When the material is replicated into srm, it will be tagged to both the hierachies R3MATCLASS as well as R3PRODSTYPE. The category id corresponding to the hierachy R3PRODSTYPE will have the format MAT_XXXX where XXXX denotes the material type. e.g. MAT_ESRA where ESRA denotes the material type in R/3. The characters after MAT_ will vary.
The below step is followed to get the material type in SRM:
1. Get the product GUID of the material (product) used int he shopping cart from the BBP_PD transaction. Or the product GUID can be obtained from table COMM_PRODUCT.
2. Get the Hierarchy GUID of R3PRODSTYPE from COMM_HIERACHY.
3. Get the CATEGORY_ID from the table COMM_PRPRDCATR based upon product GUID and HIERARCHY GUID of R3PRODSTYPE.
It will give the result in MAT_XXXX format. The remaining characters after MAT_ represents the material type.
Hope this information will be useful.
Regards,
Aswini
Edited by: Aswini Kumar Sahoo on Sep 18, 2009 5:29 PM
Edited by: Aswini Kumar Sahoo on Sep 18, 2009 5:30 PM -
1.BACKGROUD PROCESSING
2. BLOCK LOCAL SOURCING
3.srm 7.0 ehp4 ecc 6.0 xi RATHER THAN idoc
4.contract hierarchy
5. Can any one hammer the Contract ?- Authoirisation
6.attachment transfer
7.no of line item - optimum
8.what are the extra facilities in SRM 700 contracts.
9.Service contract
10. pricing
can any expalin all or any points in details in SRM 700. I keep open eyes on CCTR contract advantages? Are still extra badis require to push the contract without techical help.?
any piece of information is appreciated.
MuthuHello Muthu,
At this point in time SRM 7.0 needs XI/PI for CCTR capability, this is promised to change with the release of EHP1 (due june 2010).
My list of additional features, not neccesarily advantages but might be usefull to you:
Userside:
- Webfront no more ITS based: Webdynpro's + Enterprise Portal (look & feel = R/3) (advantages: SSO / central user mgt)
- configurable queries
- Universal Work List (UWL)
- Sourcing transaction / soco ()
User mgt:
- SRM User mgt = Portal user mgt (portal user + application user)
Workflow:
- Process Controlled WF / Application Controlled WF (New: Process Controlled, model custom rules / WF's more easily)
Central Contract Management
- Central Contract - Transaction type CCTR (New: big advantage!), SRM Contract - PCTR, Global Outline Agreement - GCTR
- Create contract templates
- legal contract authoring part
Plan Driven procurement:
- Plan Driven Procurement and ERP EHp4 needs XML/PI for data exchange (rfc's currently not supported: SRM 7.0 EHP1)
- ERP EHP4 uses CPPR (Collective Processing of Purchase Requisitions), optional portal feature
Shoppincart:
- SC ability to create combined SC's (limit + free text + catalog + service)
- Team purchasing
Service Procurement:
- ERP EHP4 and SRM 7.0: sourcing of erp service req. including hierarchies and follow-on docs ("enhanced service procurement")
Auctioning:
dutch auction functionality (SRM/LAC seems to have inherited this functionality from E-Sourcing)
Industry Solution:
- Procurement for Public Sector (PPS)
- Document Builder, smart numbering
Kind regards,
Tim -
Unable to create a PO in SRM system
During cretion of PO in SRM system we are encountering the following situation:
Prior to that we have configured all the initial settings as below:
"Defining System landscape" on SRM side,(which updates the table BBP_BACKEND_DEST) we have defined it as type ERP_4.0 as we currently have an EhP4 backend .
We are getting the error msg: No customizing entry for "SRICLNT801' in table BBP_BACKEND_DEST when I try to create a PO in SRM Portal.
The following entries in BBP_BACKEND_DEST Table (this table is updated when Defining the System Landscape config) looks as below.
For Backend ECC Clnt - 801, Log System - ERICLNT801, RFC Destn - ERICLNT801 , RFC Dialog - ERICLNT801_DIALOG, Sys type -ERP_4.0
For SRM local clnt - 801, Log System - SRICLNT801, RFC Destn - SRICLNT801 , RFC Dialog - SRICLNT801, Sys type -LOCAL
Any clue on this ?? Its been a while now and i have no idea why is this occuring??Hi there,
I had a further look at our database. Please see the following information.
in case of ECC EHP 4.0 the use of PI is mandatory. However, on your
on risk and keeping in mind that this is kind of a modification, you
could change the backend sys-type in table BBP_BACKEND_DEST back to
ERP_3.0; a further option would be to create an implementation in
the BADI BBP_DRIVER_DETERMINE, to call a customer own driver during the
transfer of documents to the backend.
1) In case you run a EHP 4 in backend, you need to set system
type ERP_4.0 in table bbp_backend_dest, which requires the use
of PI.
2) As prerequisite for activitaing LOG_MM_P2PSE_1, you need to have
EhP 4 installed in your ECC system, also the following business
functions need to be activated:
ESOA_OPS01, LOG_ESOA_OPS_2 and LOG_MM_CI_2
(please also check the information and documentation about the BF
in your backend ECC system)
Hope this helps,
Kind Regards,
Matthew -
Condition Type NAVS not determined for Goods PO
Hi all,
I am working on SRM 5.0 and R/3 4.6C.The problem im facing is for the tax condition determination for PO for Goods type which replicated from SRM to PO .
In case of Service PO,the conditions are determined correctly and can be seen in the PO print out.However In case of a goods PO,if i goto conditions tab in ME23N for the PO,the conditions (NAVs) are not determined as well as they cant be seen in PO print .
The config on R/3 side is Correct as in case of manual PO(PO created directly in R/3),the conditions are determined correctly.
Now when i debuuged the BAPi "BAPi_PO_CREATe1",i observed the following:
If i chnage the field PO_PRICE in the table POITEM to "1",then conditions are determined corretcly for the PO.However by dfault,the value for this field comes to "2".
This field is nothing but indicator of the price i.e. 1 for Gross and 2 for Net.
Can anybody explain me the link between this price and condition types determined in PO.
Thanks.Check out SAP Note 580225 - Purchasing BAPIs: Conditions and pricing
Hope it helps
Maybe you are looking for
-
Year property for category dimension
Since year property is the Required Properties for Category Dimensions, if I need to have actual and budget for multiple year, is this mean that I need to create id for every year? Like following: ID year actual_2010
-
Modify Form Number at Bottom of Every Page
How do I modify the form number at the bottom of every page of a LiveCycle form that I did not create. The form number appears to be below the table that contains all of the form fields and form-field labels and is on the same line as the page numbe
-
In Design CC Back saving IDML file is crashing CS6
I have done all the updates for CC and have the latest version, but when I try and export or save as an IDML file, and try and open the IDML file in CS6 it keeps crashing In Design. Please Help!!
-
I upgraded my iphone 4s to ios 6.0.1 2 days ago and since then it has been overheated! is ios 6.0.1 not meant for iphone 4s? how can i solve the isssue?
-
What is class & classifications
Hi My requirement is to create tables same as standard tables. So they told me to create tables using class & classifications. I dont know what is class & classifications. Please help me to create tables using this and also what is the tcode for that