Types of dvd-r accepted by the Matshita Burner in a Powerbook G4.

I used until now of the DVD-R - X8, bought on AppleStore for the use
in my Matshita Burner - VJ-825 which is in my PowerBook G4, - 1,5 ghz.
I found the available one in the country where I live of the DVD-R
(1-16 X) 4,7 GB of the PHILIPS mark. Please can you say to me if the
fact that they are (1-16 X), can damage my burner which is designed
to engrave until X8, or that does not have any importance.
thanks for agreeing to answer me with certainty.
powerbook G4, 17", 1,5 G Mac OS X (10.4.7)

The speed of the disk you buy doesn't matter much, but the speed you record at does.
I recommend a disk image burned to Verbatim DVD-R at 4X or slower using Toast or Disk Utility.
David Pogue also recommends Verbatim on page 356 of his latest book:
iMovie HD & iDVD 6: The Missing Manual
Quoting David: "Cheaper brands don't use the same amount of organic dyes and are more likely to suffer premature deaths."

Similar Messages

DVD Studio Pro 2 will not burn DVDs

I have recently upgraded to Leopard. I can now build an entire project in DVD Studio Pro 2. However, when I try to build, format, or build & format a DVD the application will "quit unexpectedly."
I contacted Apple support and was told to uninstall the program and re-install it. I did that and the problem still exists.
All of my software has been updated.
I understand the software is "older" but if it were unsupported software, why can I build an entire project and only have trouble when it comes to transferring it to a DVD?
My DVD superdrive has been upgraded, and I have burned photo DVDs and CDs with the new burner without any issues.
Does anybody know what else I can do?

PaulaMac wrote:
David,
I didn't mean to offend you with my frustration with Apple. I understand the need to upgrade operating systems. However, I don't believe that upgrading operating systems should make software obsolute. When Windows changes their operating systems, the programs you have installed on your PC will continue to work.
Leopard is many interations passed the OS that DVD SP came out and you would have the same issues in Windows with what software runs or not and usually Mac software has a pretty good lifetime. DVD SP has not been sold as stand alone for quite awhile unfortunately. Though I do have some issues with Apple from time to time, this is one of those where I cannot fault them.
Try Tiger (I am running PS3 on 10.4.11 MacBook Pro with no issues), but make sure to deauthorize your Photosshop 3 before doing anything on the sytem. As to Leopard, I am not a big fan yet, so unless you absolutely need it, you are not missing much yet.

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

I have a MacBook Pro 15.4" 2.53GHz Core 2 Duo (A1286) - Mid 2009 MC118LL/A and I think the MATSHITA DVD-R UJ-868 is going out. Should I replace it with the exact same drive or is there a better one that is compatible?

I have a MacBook Pro 15.4" 2.53GHz Core 2 Duo (A1286) - Mid 2009 MC118LL/A and I think the MATSHITA DVD-R UJ-868 is going out. Should I replace it with the exact same drive or is there a better one that is compatible?

I went to my local Apple store last weekend with a similar issue on my 2007 C2D MBP and they quoted me a price of around £60 (excluding VAT) to replace the optical drive. That's about the same price as the external optical drive a bought for my RMBP.
Alternatively you could just buy a 3rd party external drive if you want to save cash but note that the external Apple superdrive is not compatible with MacBooks with built in optical drives.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.

Hello, I am filtering by date
DATEADD(d,DATEDIFF(d,0,GETDATE()),0), but
doing like below gives me an error
ADODB.Command error '800a0bb9'
Arguments are of the wrong type, are out of acceptable range,
or are in
conflict with one another.
/aa.asp, line 19
line 19 is
Recordset1_cmd.Parameters.Append
Recordset1_cmd.CreateParameter("param1",
135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
any one have any idea as to why
grateful for any help
thanks
k
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
Dim Recordset1__MMColParam
Recordset1__MMColParam =
"DATEADD(dd,DATEDIFF(d,0,GETDATE()),0)"
If (Request("MM_EmptyValue") <> "") Then
Recordset1__MMColParam = Request("MM_EmptyValue")
End If
%>
<%
Dim Recordset1
Dim Recordset1_cmd
Dim Recordset1_numRows
Set Recordset1_cmd = Server.CreateObject ("ADODB.Command")
Recordset1_cmd.ActiveConnection = MM_connpeepeek_STRING
Recordset1_cmd.CommandText = "SELECT usr_image1,
dateimage_usr FROM
diddle.ps_usr_image WHERE dateimage_usr = ?"
Recordset1_cmd.Prepared = true
Recordset1_cmd.Parameters.Append
Recordset1_cmd.CreateParameter("param1",
135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
Set Recordset1 = Recordset1_cmd.Execute
Recordset1_numRows = 0
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<title>Untitled Document</title>
</head>
<body>
</body>
</html>
<%
Recordset1.Close()
Set Recordset1 = Nothing
%>

Ben,
If dbo.TG_Account is a table in your FDM database, then you should be able to populate the recordset with:
strSQLAcct = "SELECT Account FROM dbo.TG_Account"
Set rsAcct = DW.DataAccess.farsFireHose(strSQLAcct, False)

My Macbook keeps saying 'The burn to the MATSHITA DVD-R UJ-898 drive failed. The burn failed because of a medium write error.' everytime I try to burn a cd with data on it, it has only just started doing it after 2 years of use, how do I fix it?

My Macbook keeps saying 'The burn to the MATSHITA DVD-R UJ-898 drive failed. The burn failed because of a medium write error.' everytime I try to burn a cd with data on it, it has only just started doing it after 2 years of use, how do I fix it?

Have you tried using a different brand of optical disk? (You don't say whether you are doing CDs or DVDs.) Some are better than others.

Why under print settings, media type, CD/DVD is grayed out? I cannot print on the DVD directly

I have Photoshop Elements 6. Trying to print pictures on DVD. But under the Media options for printing the CD/DVD option is grayed out so I cannot click on it? any ideas?
Thanks

silviosperber wrote:
I have Photoshop Elements 6. Trying to print pictures on DVD. But under the Media options for printing the CD/DVD option is grayed out so I cannot click on it? any ideas?
Thanks
Are you tyring to write your photo files to a DVD ?
Or are you trying to print to a paper label on a DVD disc?
Also, I suggest that you describe the process that you are attempting (like which menu commands or buttons you used).

What type of DVD should I use for Windows Backup?

I am wanting to do my Windows Backup and I was wondering what type of DVD media I should use. Is it better to use a RW or only R type DVD.
I have an HP Omni 220-1180qd, A5W89AV#ABA, running Win7 64 bit.
I thought I read it can use CD's, DVD's but I want to know which would be the better choice.
Thanks for any help and all help is appreciated.
This question was solved.
View Solution.

Honestly, an external hard drive would be a better choice. The difference between +R and +R/W is that +R is "Recordable" and +R/W is "Re-Writable". If you intend on making periodic backups, go with an extrernal hard drive... If you intend on making very few backups, consider the DVD+R discs.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

What type of dvds should i use for writing with hpenvy touchsmart

what type dvds are writable in the pc
This question was solved.
View Solution.

Hi,
What is your "hp envy touchsmart 17.1". Normally you can use blank DVD+R or DVD-R to write.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I keep getting the error message on my MP510, the type of printhead is incorrect install the correct

Recently my printer stopped printing black, although it would print the other colors. When I tried to print a print pattern, it would not print the checkered pattern it used to print to check the alignment. I tried cleaning, to no avail. Then I got the message: the type of printhead is incorrect, install the correct printhead on my control panel. Now when I turn on the unit, I can't do any maintenance or anything, it just shows the same error message as noted. I talked to a Canon representative, and he said to clean the printhead, I did. That did not help. My questions are, is the printhead bad. Second, it would seem I can replace the printhead. Just what is the likelyhood the printhead is the probnlem, or is this problem a problem that can only be curred by a service tech? Canon informs me this printer is not serviceable anylonger? So, I guess I'm on my own? They offer a deal on another printer at a reduced price. Frankly, I don't think my printer needs to be replaced, just fixed. If all that it requires is a printhead, I'm sure I can do the replacement. Just what are the odds replacing the printhead will solve the problem? I'm quite certain this error message has occured before on this type of printer, and other users have probably figured out the solution? Can someone help? Thank you.
Rick

Hi sciencemagic,
The major cause for this type of error/issue is the printhead. In most situations, replacing the printhead will resolve the problem. However, the error may appear because of another internal malfunction with the printer.
Another thing to consider is the cost of a replacement printhead, which may exceed the cost of purchasing a newer printer. With the newer printer you also get access to newer printing features and technology including better image quality.
For these reasons, I recommend exploring the replacement option, but we are happy to help with any available service options for your PIXMA MP510. Contact us to discuss your options further.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

della wrote:
My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
It's probable that the CD 'side' of the combo drive has failed. That you cannot boot from the recovery CD is pretty much proof of the failure.

What type of DVD burns on a Mac r or -r?

Need to know what type of DVD to purchase to burn a movie. DVD+R or DVD-R for a Mac.

Depends on what machine you intend to use it on.
Most Mac's should be able to do both DVD-R and DVD+R formats it's the other device you got to worry about.
The important thing is get the small batch of DVD's first and try a few burns and test them on the other machine.
Then you can buy the big stack.
Some makes of DVD's are better (or worse) than others. Also there seems to be a heat or time issue with then as well, so don't pick up the stack with a lot of dust on it.
Leave the DVD's in the case only extract one as you use it and never return one to the case, don't touch the bottom ever or lay the bottom on something hard.
finicky things those DVDs, got to try a few to get a burn sometimes.

Supplied credentials not accepted by the server and Could not validate SPNEGO token

Hi,
We have installed and configured SSO 2.0 SP02 on HP-UX system. We have exported the client policy files, root certificate from SLS and imported the same in the client PC. Then we have installed the SLC in client PC with logging enabled option. Now when we try to manually login using SLC we are getting the below error.
In SLC - "Supplied credentials not accepted by the server"
In Diatool - "Could not validate SPNEGO token"
Attached the trace file from SLC and logs from diatool. Anyone suggest how to rectify this error.
The trace file from SLC
[2014.03.28 12:08:50.434][TRACE][sbus.exe            ][sbus.dll    ][ 4856] CToken:: Secure Login token [toksw:mem://securelogin/Windows Authentication (SPNEGO) :: login
[2014.03.28 12:08:50.452][TRACE][sbus.exe            ][sbusresloade][ 4856] { GetLocale
[2014.03.28 12:08:50.453][TRACE][sbus.exe            ][sbusresloade][ 4856] }        0
[2014.03.28 12:08:50.453][TRACE][sbus.exe            ][sbusslogin.d][ 4856] { CSecureLogin_Protocol_2_0::Send_Init
[2014.03.28 12:08:50.453][TRACE][sbus.exe            ][sbusslogin.d][ 4856] { CSecureLogin::Send_Any
[2014.03.28 12:08:50.515][ERROR][sbus.exe            ][BASE        ][ 2800] ERROR(0xA0100017) in CRYPT->sec_crypt_cipher_get_cipher_len(): An attribute is missing
[2014.03.28 12:08:50.563][TRACE][sbus.exe            ][sbusslogin.d][ 4856] }        0
[2014.03.28 12:08:50.563][TRACE][sbus.exe            ][sbusslogin.d][ 4856] }        0
[2014.03.28 12:08:50.566][TRACE][sbus.exe            ][sbusresloade][ 4856] { CResourceManager::New
[2014.03.28 12:08:50.566][TRACE][sbus.exe            ][sbusresloade][ 4856] { GetLocale
[2014.03.28 12:08:50.566][TRACE][sbus.exe            ][sbusresloade][ 4856] }        0
[2014.03.28 12:08:50.566][TRACE][sbus.exe            ][sbusresloade][ 4856] { CResourceManager::Init
[2014.03.28 12:08:50.568][TRACE][sbus.exe            ][sbusresloade][ 4856] }        0
[2014.03.28 12:08:50.568][TRACE][sbus.exe            ][sbusresloade][ 4856] }        0
[2014.03.28 12:09:00.979][ERROR][sbus.exe            ][sbus.dll    ][ 4856] LogonUser failed with error 0x0000052e
[2014.03.28 12:09:12.628][TRACE][sbus.exe            ][Kerberos    ][ 4856] Got kerberos ticket for 'HTTP/ssodev' with server key type 23 and session key type 23
[2014.03.28 12:09:12.628][TRACE][sbus.exe            ][BASE/RANDOM ][ 4856] Get 8 bytes random data
[2014.03.28 12:09:12.628][TRACE][sbus.exe            ][sbusslogin.d][ 4856] { CSecureLogin_Protocol_2_0::Send_Auth_SPNEGO
[2014.03.28 12:09:12.628][TRACE][sbus.exe            ][sbusslogin.d][ 4856] { CSecureLogin::Send_Any
[2014.03.28 12:09:12.727][TRACE][sbus.exe            ][sbusslogin.d][ 4856] }        0
[2014.03.28 12:09:12.727][TRACE][sbus.exe            ][sbusslogin.d][ 4856] { CSecureLogin_Protocol_2_0::Handle_Auth_Response
[2014.03.28 12:09:12.727][TRACE][sbus.exe            ][sbusslogin.d][ 4856] }        0
[2014.03.28 12:09:12.727][TRACE][sbus.exe            ][sbusslogin.d][ 4856] } 80070005
Regards,
Yogesh Kumar D

Hello Yogesh,
With regards to the 2nd error "Could not validate SPNEGO Token"
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.SPNegoLoginModule                     SUFFICIENT ok          exception             true       Could not validate SPNEGO token. Reason: No user with account attributes [[namespace=com.sap.security.core.authentication, name=principal, value=sap.helpdesk1, isCaseSensitive=false], [namespace=com.sap.security.core.authentication, name=realm, value=HZL01.VEDANTARESOURCE.LOCAL, isCaseSensitive=false]] found
No logon policy was applied
It means that the user "sap.helpdesk1" was decrypted from the kerberos
token but there is no user with this name in the AS Java. The reason for that is a misconfiguration in the SPNEGO user mapping.
Therefore, please open the SPNEGO wizard in the NWA and configure
how AS Java should choose a user from the UME based on the received
SPNEGO token. Here is some documentation about configuring the user
mapping:
http://help.sap.com/saphelp_nw73/helpdata/en/f4/1978c3a37a441b87a89d61c1a08689/frameset.htm
Regards,
David

HT4059 What types of files are acceptable for ibooks?

I have some books that end with .mobi and various other file types. Which are acceptable in iBooks?
Also, where can I put these files in order to add them to either the Kindle app or the iBooks app? Which folder?

You may find these links useful:
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
Ciao.

Types of dvd-r accepted by the Matshita Burner in a Powerbook G4.

Similar Messages

Maybe you are looking for