Types of Infocube & DSO in BI 7.0 version

Hi,
What are the Types of Infocube in BI 7.0 version, Please provide details and document also. what are the usage these types of infocube.
What are the Types of DSO in BI 7.0 version, Please provide details and document also. what are the usage these types of DSO.
Thanks,
Vijay.

Hi Gopi,
Use a standard DataStore object and set the Unique Data Records flag if you want to use the following functions:
○       Delta calculation:
○       Single record reporting:
○       Unique data:
Write optimized DSO
●      You use a write-optimized DataStore object as a temporary storage area for large sets of data if you are executing complex transformations for this data before it is written to the DataStore object. The data can then be updated to further (smaller) InfoProviders. You only have to create the complex transformations once for all data.
●      You use write-optimized DataStore objects as the EDW layer for saving data. Business rules are only applied when the data is updated to additional InfoProviders.
DataStore object for direct update
you can use a DataStore object for direct update as a data target for an analysis process. The DataStore object for direct update is also required by diverse applications, such as SAP Strategic Enterprise Management (SEM).
http://wiki.sdn.sap.com/wiki/display/BI/AboutDSOtypesinBI
Hope this helps.....

Similar Messages

Infocube/DSO/Process Chain - data load statistics

Hi,
I'm trying to look for the total data records extracted per day and extraction time from ECC into a particular DSO or infocube.
Also the start and end times of the process chain which executes this infocube.
We are trying to do some performance analysis for the volume testing.So ,we can compare the data volume loaded vs the execution times.
I was able to look under the infocube/dso -> right click -> MANAGE -> transfered records/update records , request time,update time
For this, do I need to look at the full update details or the delta update details?
Also under a particular process chain,-> right click on First step ->Display messages to get the start time of the job
Right Click on last Step ->Display mseeages to get the job finished time.
I just wanted to get your thoughts on this, if this is the correct way to get the total records extracted and extraction times along with process chain times.
Thank you.

Hi,
Based on the time char like 0calmonth, 0calday you will check the data.
check the jobs in SM37 at ECC and BI system.
select the specific jobs it will give clear picture. how much taking time form source to target.
you use the DB02 and STO5 and RSTT you can do performance analysis.
manage screen you will get either full or delta and which one source system and which type of data source.
Process chains have it will automate the PRD system
Thanks,
Phani.

Error while loading data from DataSource to InfoCube/DSO through DTP

Hi Friends,
I am trying to load data from DataSource to InfoCube/DSO through DTP and getting the following error:
Exception in substep: Extraction completed
Processing terminated
Data package 1 / 30.04.2009 22:38:30 / Status 'Processed with Errors'
When i see the detail message it says:
Syntax error in routine "convert_to_applstru", line 25 of generated program"
I checked all my transformation and looks ok. I was able to load data earlier and i getting this error all of sudden. Does some one know what is this routine "convert_to_applstru" ?
Thanks,
Amit

Hi Arun,
Where do i see this generated program in RSRV. I dont see this in RSRV. Please guide me.
Thanks,
Amit

How to get the list of Infocube/DSO in which one nav-attr is used

Hi all,
i have a requirement to find the list of all infocubes and DSO in which a particular navigational attribute say:xxx_yyy [i have list of 50 nav attr for which i have to do this] is used.
i need ur help on this.
i need the distinct list of infocubes and DSO

guys, 80% of my problem got solved.
here is the solution list as u all have suggested and that i have checked it also.
RSDCUBEIOBJ - infocube list for any nav-attr
RSDODSOATRNAV - DSO list for any nav-attr
ODSOIOBJ. - DSO list for any infoobj
but in these tables, one thing i observe is that each infocube/DSO name is repeated multiple times. why is that? from where it populate?

Prerequisites for revert back a migrated infocube/dso from 7.x to 3.x

Hi Expert,
    1. Unknown error while uploading data from DB table
        Error in Source System
I check the source system, it is working fine. I check the DataSource Extraction Tab DB user and Source System connection user name both are same. Serve Support Pack Level is 8 ( Client don't want to appy support pack to 15). Please help me to solve this.
    2. I want to know what are the precaution to take when we are revert back a infocube/DSO from 7.x to 3.x. Please let me know.
Thanks
Satish

1. You may need to reactivate your DS, o other objects associated with this data flow...
2. Is i snot possible to do UNDO of migration of objects like cubes or DSOs. The reason is that those objects are the same in BW 3.x and 7.x. Only datasources are being migrated (also you can to undo of migration) and data flows (update rules are replaced by transformations)

When do we create a Infocube & DSO?

Hi Experts,
I got some doubts about Infocube & DSO. I want to know on what kind of scenario, we create an infocube & DSO? I know this is a usual question, but I want a detailed level of explanation.
Thanks in advance,
With warm regards,
Kannan

Hi Kannan,
InfoCubes
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
DSO
A DataStore object serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level.This data can be evaluated using a BEx query.A DataStore object contains key fields (such as document number, document item) and data fields that, in addition to key figures, can also contain character fields (such as order status, customer). DSO consists of three tables: activation queue, table of active data, change log
The data from a DataStore object can be updated with a delta update into InfoCubes (standard) and/or other DataStore objects or master data tables (attributes or texts) in the same system or across different systems.
Unlike multidimensional data storage using InfoCubes, the data in DataStore objects is stored in transparent, flat database tables. The system does not create fact tables or dimension tables.
Thanks,
Ravi

"uses a file type that is blocked from opening in this version" error message when opening a *.doc file with Word already running

Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.

Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.

Flex iPad Application : Run code before application enters background Application Type: Flex Mobile Application Target Platform: iPad AIR Version: 4.0 Development Environment: Flash builder 4.6 I want to run some code just before iphone application goes

Application Type: Flex Mobile Application
Target Platform: iPad
AIR Version: 4.0
Development Environment: Flash builder 4.6
I want to run some code just before iphone application goes into background. I need function similar to didEnterBackground
of native xcode app
(https://developer.apple.com/library/ios/documentation/UIKit/Reference/UIApplicationDelegat e_Protocol/Reference/Reference.h
tml#//apple_ref/occ/intfm/UIApplicationDelegate/applicationDidEnterBackground:)
I tried using devactivated function of flash.display.STAGE.
I used following addEventListener:
STAGE = this.parent.stage;
STAGE.addEventListener(Event.DEACTIVATE, onAppDeactivated);
It worked for me but only when device is connected to development environment in debug mode. When I create my release build
it is not working.
So how can I make sure that my code runs before application goes into background.

Even I am facing almost same issue
Problem installing Adhoc version to iPhone and iPad - Development Environment Is - Adobe Flash CS6

Collection type supported in Oracle Forms Forms [32 Bit] Version 6.0.8.11.3

Hi
I am trying to call this from forms.
I am getting error no data found whenever this calles IF condition but from backend if run it from a script it works fine.
So I was thinking whether Forms PL/SQL version supports collection types.
I am using Forms [32 Bit] Version 6.0.8.11.3 (Production) for Oracle Application 11.5.10 version.
IF (p_emp_ids.COUNT > 0) THEN
FOR r IN v_emp_ids.FIRST..v_pkg_ids.LAST LOOP
Thanks in Advance

Is it just a a typo that the IF is on P_emp_ids and the loop is on V_em_ids?
However: the NO_DATA_FOUND exception suggests that you may be falling down a crack in your collection. If you have a missing element between FIRST and LAST you will get a no_data_found. Suppose these elements are there:
(1), (2). (3), (5), (6)
You will start at FIRST (1) and finish at LAST (6). But your loop on R will try to find the element at (4). Which isn't there. Oops...
To prove that's what's happening, you can wrap the inside of the loop with an exception handler
   BEGIN
      do the access to v_emp_ids(r)
   EXCEPTION
      WHEN NO_DATA_FOUND then (log a message with the value if R in it)
   END;If you want to walk a collection with gaps (a "sparse" collection), this is the way:
DECLARE
     r pls_integer;
BEGIN
     r := v_empids.FIRST
     LOOP
         EXIT when r IS NULL;
         do the business on v_empids(r);
         r := v_empids(r).NEXT;
     END LOOP;Now, why didn't this work in Forms, but did on the server? Possible reasons:
- your back end script was set up differently - so you had a dense collection (no gaps)
- Client side PL/SQL is different from server side (is it still version 1.x?)
HTH
Regards Nigel
Message was edited by:
nthomas

Data type /BIC/CCABIS_COST was found in a newer version

Hai,
I am uploading Flat file (only two fields Act_period & account).
   In the schdule of preview, I am getting the following message "Error 8 when compiling the upload program: row 197, message: Data type /BIC/CCABIS_COST was found in a newer version.
My excel sheet:
Actual, Period     Account
1371                  DEP EXP- BLDG IMPR(P
1755                  DEP EXP- OFFICE EQUI
154,027.10             DEP EXP- COMP HARD
168,259.05             DEP EXP- COMP SOFT
10                 Spare Parts (P)
10                 Mis.Operat.Exp (P)
129,093.87            Basic Salary -(P)
10                 Basic Salary -(P)
10                Overtime Wages-(P)
10               Casual Salary-Skilled-(P)
10              Casual Salaries Unskilled-(P)
5,64484.99               Housing All/House Rent-(P)
5,42443.78               Vacation Airticket-(P)
5,54466.08               Vacation Salary-(P)
6,35574.34               Employee Indemnity-(P)
0               Relocation-Production
0              Medical-(P)
2,97550.00              Transport Allowance-(P)
1,522.53             GOSI-(P)
Any tips to solve this porblem?
****Points will be given************
With Regards,Jaheer.

Simply restart AWB using /NRSA1 will do the magic..
go out the transaction RSA1 ans return to the transaction RSA1 again.
This would help for me without restarting anything.
else try the following :
In case of the flat file datasource, when you assign flat file source system again, the system assign IS to the old transfer structure! Because of the same DS name.
u can try the following :
1. Log off the system. During the current session the system may keep deleted IO, TRs, URs etc and propose them again. Log off should clean the eleted objects.
2. If the #1 didn't help. - Recreate an infosource with a new name. Create all other structures as needed
else try this :
delete Infosource - Source system assignment (with PSA tables etc.
- activate Infosource communication structure
- assign source system
- create infopackage
- load data again

Error Message When I Invoke my web services : Exception source is: mscorlib' , Stack Trace :System.Runtime.Serialization.SerializationException: Type 'System.ServiceModel.ExceptionDetail' in Assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral,

Exception source is: mscorlib' , Stack Trace :System.Runtime.Serialization.SerializationException: Type 'System.ServiceModel.ExceptionDetail' in Assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' is not marked
as serializable.
at System.Runtime.Serialization.FormatterServices.InternalGetSerializableMembers(RuntimeType type)
at System.Runtime.Serialization.FormatterServices.GetSerializableMembers(Type type, StreamingContext context)
at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitMemberInfo()
at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter,
SerializationBinder binder)
at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Write(WriteObjectInfo objectInfo, NameInfo memberNameInfo, NameInfo typeNameInfo)
at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck)
at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.SerializeObject(Object obj, MemoryStream stm)
at System.AppDomain.Serialize(Object o)
at System.AppDomain.MarshalObject(Object o)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
at System.Windows.Application.RunDispatcher(Object ignore)
at System.Windows.Application.RunInternal(Window window)
at System.Windows.Application.Run(Window window)

Hi,
The forum is main about installation problem of .NET Framework. Your problem is out of support in the forum. You should post your thread to the forum:
https://social.msdn.microsoft.com/Forums/en-US/clr/threads
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?
I have tryed to change just extension from doc to docx, but it doesn't work. I am new user, please help

Consider the Mcrosoft Office:Mac forums as well:
Office for Mac forums
Here is an MS page that deals with that error message:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/bs0811doc-use s-a-file-type-that-is-blocked-from/548ce159-8157-419e-9552-1789594fafe9

Type your questionI am trying to deactivate a version and transfer it to another computer, however I have lost the card with the serial number. Is there any way of retrieving the serial number?

Type your questionI am trying to deactivate a version and transfer it to another computer, however I have lost the card with the serial number. Is there any way of retrieving the serial number?

Hello Irene,
you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account
https://www.adobe.com/account.html and to find your serial number have a look there http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hans-Günter

Standard Business Content infocubes, dso for QM-Module

hi
Can anyone give me the "What Are the Standard Business Content InfoCubes and DSO" for QM -module.
My client wants some standard business content objects for QM-Module.
So please help me
kumar

hi,
check out the following link. hope this help you. all infocubes in QM
http://help.sap.com/saphelp_nw70/helpdata/en/b1/91823b6a86975fe10000000a11402f/frameset.htm
regards
harikrishna N

Reg: dtps and infocubes,Dsos in bi 7

HI All,
Can you please explain in details about types of dtps and use(singifiance of each dtp) them in bi 7 as well as cubes and dsos, please do not send links it is difficult to get what i want.
Thanks in advance
Vis
Please search the forum/SDN before posting a thread.
Edited by: Pravender on Jun 29, 2010 10:46 AM

Hi,
In BI 7.0 when you need update rules and transfer rules, you can create it by
right click on data target --> additional Fumctions --> create Update Rules
Using this you can create Update Rules , but only thing is the Infosource you are planning to use should be 3.X infosource.
But same functianality or you can say better functionality you can achieve by using Transformation rather than Update and Transfer rules.
I hope this satisfies your query.
Thanks,
Geetanjali.

Types of Infocube & DSO in BI 7.0 version

Similar Messages

Maybe you are looking for