Types of LCD (TN, PVA, IPS...) for different iMacs

Do you know what type of LCD is used in the old (white) and new (aluminum) iMacs, especially for the old-20? Here are some guesses, based on information from various threads (two are listed below) and I'd appreciate it if you can make corrections where necessary:
• new-24: H-IPS
• new-20: TN (but are there different sub-types of TN?)
• old-24: recently manufactured probably use H-IPS, but were the first ones (almost a year ago) different?
• old-20: ?? (they were not TN, but what were they?) - probably IPS? or PVA?
• old-17: TN (but similar to new-20 or different in some way?)
re: new-24, http://forums.macrumors.com/showthread.php?t=344204&page=2
especially Posts 31-36 (re: using SwitchResX to get monitor info)
re: old-24, http://forums.macrumors.com/showthread.php?t=343525

Hi CraigRu,
from the review I have read in german computer magazine c't:
the new 20" iMac has a TN display
the new 24" iMac has a IPS-display
For the 'old' iMacs I have to crawl through the stashes of the old issues of the c't, maybe I find them.
For some deeper informations on LCD Displays: http://en.wikipedia.org/wiki/Liquidcrystaldisplay
Regards
Stefan

Similar Messages

  • What's the right memory module for an iMac G4 Flat panel 15-inch?

    Hello!
    A new program I've recently bought requires me to expand my iMac's memory, which is currently 256 MB.
    After searching the Apple Store web site, I think I've come to the conclusion that what I need is an Apple memory module called "512MB DDR266 SO-DIMM (PC2100), 200-pin". As I don't know any expert who can give me some advice, and as I'm no expert myself, could anyone please tell me if that's right?
    Thank you!
    iMac G4 Flat panel 15-inch   Mac OS X (10.4.8)  

    Ciao e benvenuto alle discussioni di Apple. 
    There are actually 3 different types of user slot installable RAM for the iMac G4 models so you'll have to check what your processor speed is (Go to  Apple Menu > About this Mac > ):
    iMac G4 15" and 17" 700 or 800MHz, PC133 144pin SODIMM.
    iMac G4 17" 1GHz, PC2100 200pin SODIMM
    iMac G4 1GHz 15" or 1.25GHz 17"/20", PC2700 200pin SODIMM.
    So although I can't tell you exactly what RAM you need I can tell you that if you have a 15" screen the PC2100 is wrong.
    I'd advise using Crucial memory in Europe as the prices are amongst the best and they are Mac friendly. I wouldn't recommend Apple memory; it's overpriced. I also wouldn't advise buying a cheap brand as it could cause trouble.
    Here are the fitting instructions.
    mrtotes

  • Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

    Hi,
    Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
    Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign  2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
    IP for communicating with the CAS server which is in a different domain.? 
    Details: 
    1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
    Thanks
    Rajesh Vasudevan

    First, it's not possible. You cannot attach a primary site to an existing CAS.
    Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
    CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
    no functional differences but does add complexity, latency, and additional failure points.
    Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
    As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
    for trouble IMO.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Print in different page for different material type in Sapscript

    Hi all
    How do I do the above matter?
    Currently I have a script that print all material according to some condition.
    My client request to have a different page of material list for different material type.
    Please advise
    az

    Hi,
    1) Sort the internal table by material type.
    call func 'OPEN_FORM'.
    loop at itab.
    at new mattype.
    if mattype = 'A'.
      call fun 'START_FORM'.
       exporting
        page   =    'PAGEA'.
    elseif mattype = 'B'.
      call fun 'START_FORM'.
       exporting
        page   =    'PAGEB'.
    endat.
    call func 'WRITE_FORM'.
    AT end of mattype.
    call function 'END_FORM'.
    endat.
    endloop.
    call function 'CLOSE_FORM'.
    Thanks,
    Nethaji.

  • Different movement types for Goods Issue for different Order Types

    Hello Experts,
    Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
    Thanks and regards,
    Satyajit

    Satyajit,
    Folow the link given,
    Re: How to add new movement types when creating reservation?
    Hope this helps you.
    SmanS

  • Cost Distribution in Shopping Cart for different account assignment type

    Hi friends,
    We are at SRM Server 5.5 at level SAPKIBKT07. Business scenario is extended classic.
    User is creating a shopping cart with single line item and distributing the cost to multiple account assignments (say Cost Center and Order). Shopping cart has a valid source of supply. System creates a PO in SRM and tryu2019s to replicate the PO in ECC backend, however fails to replicate.
    My understanding is that in ECC backend it is not possible to combine two different account assignments while distributing cost at item details.
    Solution would be to create separate line items for different account assignments (distribute between similar account assignments).
    Is my understanding right?
    Thanking you in advance,
    Sandeep

    Sreedhar,
    Thanks for your update.
    I am also MM consultant, so as far as MM goes we can only maintain one account assignment type per line item. In MM we have provision of multiple account assignment but it works only for single account assignment type per line item. Which means if account assignment is "k" then we can split between multiple cost centers, but we cannot split between cost center and WBS element in one line item.
    You said it is possible to split between multiple account assignments in one line item. Will it be possible for you to try at your end and let me know how PO/PR are created in backend?
    Sandeep

  • Multiple Document Types For Purchase Requisition For Different Order Types

    Dear SAP Gurus,
    I want to have different document types of Purchase Requisition for different Order types.
    For Example:
    for Order Type ZT01- Document Type used should be YR01
    for Order Type YA01- Document Type used should be ZR01
    How could this be achieved?
    Regards.

    hi
    Kindly check the user exit for the same
    COZF0001 or COZF0002
    regards
    thyagarajan

  • How to maintain PO Header Text entry in table T166K for different PO Type

    Hi,
    Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
    Thanks
    Shrikant

    Spro->Material Management->Purchasing->Purchase Order->Texts for Purchase Orders.
    There are 4 config setting to do for this.
    Read information text.
    regards,nishant
    please reward if this helps

  • How to maintain PO Header Text entry in table T166K for different PO Types

    Hi,
    Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
    Thanks
    Shrikant

    Resolved.

  • PO Output message types for different document types

    Hi,
    I wanted the system automatically generate the messages whenever a PO is created for different document types like NB,UB,Blanketorder, Pilot run.
    These are the steps i did...plz advice any more steps to make this work
    1. the output type I am using is NEU-purchase order
    2. I have created condition records for document types NB,UB,PR etc
    I was sucessfull in getting the messages automatically for the standard(NB) PO..but not for the other document types
    Plz advice me how I can achieve this with further configurations
    Thanks
    SKid

    If you have created conditin record for all the document type in MN04 then it should work becuase doc type has nothing to do for printing config.
    this is basically a condition record.
    check your condition record

  • Customisation for PO Release (different Values for different Doc Types)

    Dear Experts,
    I need to configure for PO release procedure where in the Characteristics would be Plant (2 Plants), Doc Type (3 types - Standard PO, Imports PO & Capital PO) and Value (2 stage release: 0-100000 & >100000 INR for Std PO, 0-200000 & >200000 INR for Imports PO and 0-300000 & >300000 INR for Capital PO).
    Please let me know where I shoud define the different Values for different Docs for the Release procedure to work properly.
    Or let me know the entire procedure for achieving the same.
    Regards,
    MNP

    Hi MNP,
    You have to create different CLASSes in IMG with the possible combination of different characteristics,
    EX. CLASS EKKO11 - Plant A, Doc type- Std PO, Value- 0-100000 & >100000 INR
          CLASS EKKO22-  Plant A, Doc type- Import PO, Value-  0-200000 & >200000 INR
          CLASS EKKO33-  Plant A, Doc type- Capital PO, Value-  0-300000 & >300000 INR  and same for other plant
    then assign these classes to the respective Release group.
    regards,
    Pravin

  • Descriptive flexfield for different purchase order types

    Hi,
    Can i have a descriptive flexfield for different purchase order types?
    Scenario : I have two purchase order types
    1. Blanket : done from req--> auto create --> standard PO
    2. Standard --> Direct PO
    Regards
    846691

    You can use darpan77's suggestion for context sensitive DFF. See http://oracle.anilpassi.com/context-sensitive-descriptive-flexfields.html for an example.
    However, both options you mentioned talk about standard po. Is the difference in how they are generated? (One is manual and the other is autocreated?)

  • GR output quantity for different material types using 101 mvt

    Hi All
    Is it possible to have separate GR slip quantities for the same movement type (101) but for different stock types.
    I would like 3 GR slips for mvt type 101 for directly procured materials AND
    I would like 1 GR slip for mvt type 101 for stock materials
    Therefore, the material type on goods receipt would decide how many GR slips would be printed.
    What config is necessary?
    Thanks in advance
    Darren

    material type is fixed for a material, it is not changed for GR.
    you can make no of GRs or one po.
    for stock items you need to make one PO and matrial for account assignment need separete PO.
    account assignment PO > material direclty goes to cost center and consumption accouont
    no configuration required.

  • Uploading data in MM01 for different material types

    Hi,
    I have a doubt regarding uploading the data in MM01 for different material types.
    Generally in MM01, we have different views for different material types. The number of views will vary depending upon the material type that we select.
    I have a scenario, where in to upload the data, I have a flat file that consists of data for different message types. So, how to upload the data in such case.
    Can anyone help me on the same by providing explanation or sample code...? What would be the possible ways to upload data in such scenario.
    That would be of great help.
    Thanks & Regards,
    Pradeep.

    See the below code and use FM SELECTION_VIEWS_FIND..
    REPORT zjpmuim306 NO STANDARD PAGE HEADING LINE-SIZE 250 MESSAGE-ID
    zjpm001.
    *&   I N B O U N D  V I A   A B A P : Batch input Session method     *
    *&   Development ID: IM_DD_306_LJP                                   *
    *&   Report        : ZJPMUIM306                                      *
    *&   The Purpose of the Object is to interface Create Input Record   *
    *&   for SAP Migration from the Material master of BPCS All the      *
    *&   information received at BPCS is collected into a single record. *
    *&   By using session method upload data from file ,one item is
    *&   created for one record                                          *
    *&   Change Log:                                                     *
    *&   Init       Who              Date         Text                   *
    *&  MALIKDH1   Seshu Reddy    26-07-2003   Initial Version           *
                             Constants                                   *
    CONSTANTS:c_vkorg(4) type c value 'JP20',        " Sales Organization
              c_vtweg(2) type c value 'TR' ,         " Distribution Channel
              c_werks(4) Type c value 'JP01' ,       " Plant
              c_viewlist(15) VALUE 'KDEALBSZXVPCFQG'," View list
              c_scm_view TYPE msichtausw-dytxt VALUE 'SCM View',
              c_sd_view TYPE msichtausw-dytxt VALUE 'SD View',
              c_seq_code(2) VALUE 'Z1',              " Sequential Code
              c_keep(1) TYPE c VALUE  'X',           " Keep
              c_group LIKE apqi-groupid VALUE 'IM306', " Session Name
              c_tcode  LIKE tstc-tcode VALUE 'MM02',  " Transaction Code
              c_blank(1) VALUE ' ',                   " Blank
              c_intls(1) VALUE 'N'.                  " Logistic Status
                  Variables                                      *
    DATA: g_flag1(1),  " Variable to hold
          g_flag(1),   " Variable to hold
          g_file LIKE rlgrap-filename VALUE
         'C:\Documents and Settings\seshur\Desktop\HCLT123.CSV'. " File name
           Internal tables/ Work area                           *
    Internal Table for Delimter
    DATA : BEGIN OF t_delim OCCURS 0,
           text(1000),
           END OF t_delim.
    Internal table for BDC processing
    DATA : t_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
    Internal table for holding the data which has to be uploaded.
    DATA: BEGIN OF t_bpcs OCCURS 0,
          matnr(15) TYPE c,  " material no
          dosage(40) TYPE c, " Dosage form(Local)
          appearance(40) TYPE c, " Appearance
          idcode(6) TYPE c,     " Identification Code
          prostformno(10) TYPE c, "SOP
          weitab(7) TYPE c,    " Weight/tablet
          uom1(2) TYPE c,     " UOM of Carton
          uom2(2) TYPE c,     " UOM of Case
          carsize(14) TYPE c, " Carton size
          cassize(14) TYPE c, " Case size
          rupqty(11) TYPE c,  " Round up
          abvname(3) TYPE c,  " Product short name
          END OF t_bpcs.
    *Internal table for t_bpcs
    DATA: BEGIN OF t_mdata OCCURS 0,
          matnr  LIKE marc-matnr, " Material number
          zzjp_dos_frm LIKE marc-zzjp_dos_frm, " Dosage form(Local)
          zzjp_aprn LIKE marc-zzjp_aprn, " Appearance
          zzjp_con_id LIKE marc-zzjp_con_id," Identification Code
          zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,"SOP
          zzjp_wei_tab(10) type c , " Weight/tablet
          zzjp_bio  LIKE marc-zzjp_bio,"Biologics Indicator
          zzjp_itf LIKE marc-zzjp_itf, " ITF code
          zzjp_car(2) type c, " UOM of Carton
          zzjp_cas(2) type c, " UOM of Case
          zzjp_car_size(11) type c," Carton size
          zzjp_cas_size(11) type c, " Case size
          zzjp_rupqty(11) type c,  " Round up
          zzjp_init_ls LIKE marc-zzjp_init_ls, " Logistic Status
          zzjp_re1 LIKE marc-zzjp_re1, "Document type(Local)
          zzjp_re2 LIKE marc-zzjp_re2, "Report type
          zzjp_re3 LIKE marc-zzjp_re3, "Shipping report type
          zzjp_pro_id LIKE mvke-zzjp_pro_id," Product output sequence
          zzjp_bu_id LIKE mvke-zzjp_bu_id, " Business unit indicator
          zzjp_abv_name LIKE mvke-zzjp_abv_name," Product short name
          zzjp_abv_id1 LIKE mvke-zzjp_abv_id1," Product short name output
          zzjp_abv_id2 LIKE mvke-zzjp_abv_id2," Product short name internal
          zzjp_spl_id LIKE mvke-zzjp_spl_id,  " Sample internal order
          END OF t_mdata.
    Internal table for Mara Table
    DATA: BEGIN OF t_mara OCCURS 0,
          matnr LIKE mara-matnr,  " material Number
          vpsta LIKE mara-vpsta,  " Maintenance status of complete material
          pstat like mara-pstat,  " Maintenance status
          END OF t_mara.
    Internal table for Material Master View Selection Screens
    DATA: BEGIN OF t_bildtab OCCURS 0.
            INCLUDE STRUCTURE mbildtab.
    DATA: END OF t_bildtab.
    internal table for T_bildtab
    DATA: t_bildtab_dup LIKE t_bildtab OCCURS 0 WITH HEADER LINE.
    *Work area for T_bildtab internal table(Views Selection)
    DATA: BEGIN OF w_data,
          flag1 type c,
          anzd70 TYPE i,
          field1(20) type c,
          field2(20) type c,
          field3(20) type c,
          field4(20) type c,
          count(2) TYPE c,
          END OF w_data.
                Main Processing                           *
    START-OF-SELECTION.
    Store data from file into internal table
      PERFORM f_uplaod_data.
    Transfer the uploaded data into t_mdata internal Table
      PERFORM f_process_data.
    Selecting The views based on Material number
      PERFORM f_view_list.
    Open a BDC Session
      PERFORM f_bdc_open.
    *Selecting the fields from mara table
      SELECT matnr
             vpsta
             pstat
        FROM mara
      INTO TABLE t_mara
      FOR ALL ENTRIES IN t_mdata
      WHERE matnr = t_mdata-matnr.
      SORT t_mara BY matnr.
      SORT t_mdata BY matnr.
    Transfer the uploaded data into BDCDATA structure
      PERFORM f_process_bdc.
    Close The BDC Session
      PERFORM f_close_group.
    *&      Form  F_VIEW_LIST                                             *
             Routine to used for Calling the function module            *
              Selection_views_find                                      *
    FORM f_view_list.
      CALL FUNCTION 'SELECTION_VIEWS_FIND'
           EXPORTING
                bildsequenz     = c_seq_code
                pflegestatus    = c_viewlist
           TABLES
                bildtab         = t_bildtab
           EXCEPTIONS
                call_wrong      = 1
                empty_selection = 2
                OTHERS          = 3.
      IF sy-subrc <> 0.
             MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " F_VIEW_LIST
    *&      Form  f612_view_sort                                          *
      Routine to used for Selecting The views based on Material Number  *
    FORM f612_view_sort.
      t_bildtab_dup[] = t_bildtab[].
    Reading the Internal table t_mara
      READ TABLE t_mara WITH KEY matnr = t_mdata-matnr.
      TRANSLATE t_mara-pstat USING ' $'.
      CLEAR: w_data-flag1, w_data-anzd70.
      LOOP AT t_bildtab_dup.
        IF t_bildtab_dup-pstat CA t_mara-pstat.
          w_data-anzd70 = w_data-anzd70 + 1.
          IF t_bildtab_dup-kzanz IS INITIAL.
            t_bildtab_dup-kzanz = 'X'.
            w_data-flag1 = 'X'.
            MODIFY t_bildtab_dup.
          ENDIF.
        ELSE.
          IF NOT t_bildtab_dup-kzanz IS INITIAL.
            CLEAR t_bildtab_dup-kzanz.
            w_data-flag1 = 'X'.
            MODIFY t_bildtab_dup.
          ENDIF.
        ENDIF.
      ENDLOOP.
      TRANSLATE t_mara-pstat USING '$ '.
      IF NOT w_data-flag1 IS INITIAL.
        SORT t_bildtab_dup BY kzanz DESCENDING idxbd ASCENDING.
      ENDIF.
    *Reading The internal table for T_bildtab_dup
      READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
      IF t_bildtab_dup-kzanz = 'X'.
        WRITE sy-tabix TO w_data-count.
        w_data-count = w_data-count + 2.
        IF w_data-anzd70 > 18.
          w_data-count = w_data-count - 18.
        ENDIF.
        CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field1.
        CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field2.
      ENDIF.
      READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
      IF t_bildtab_dup-kzanz = 'X'.
        WRITE sy-tabix TO w_data-count.
        IF w_data-anzd70 > 18.
              w_data-count = w_data-count + 2.
          w_data-count = w_data-count - 18.
        ENDIF.
        CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field3.
        CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field4.
      ENDIF.
    ENDFORM.                    " f612_view_sort
    *&      Form  f_uplaod_data                                           *
    Routine to used for Uploading the data from file to Internal table *
    FORM f_uplaod_data.
      CALL FUNCTION 'WS_UPLOAD'
           EXPORTING
                filename                = g_file
                filetype                = 'DAT'
           TABLES
                data_tab                = t_delim
           EXCEPTIONS
                conversion_error        = 1
                file_open_error         = 2
                file_read_error         = 3
                invalid_type            = 4
                no_batch                = 5
                unknown_error           = 6
                invalid_table_width     = 7
                gui_refuse_filetransfer = 8
                customer_error          = 9
                OTHERS                  = 10.
      IF sy-subrc <> 0.
             MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF t_bpcs IS INITIAL.
        LOOP AT t_delim.
          SPLIT t_delim-text AT ',' INTO t_bpcs-matnr
                                         t_bpcs-dosage
                                         t_bpcs-appearance
                                         t_bpcs-idcode
                                         t_bpcs-prostformno
                                         t_bpcs-weitab
                                         t_bpcs-uom1
                                         t_bpcs-uom2
                                         t_bpcs-carsize
                                         t_bpcs-cassize
                                         t_bpcs-rupqty
                                         t_bpcs-abvname.
          APPEND t_bpcs.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    " f_uplaod_data
    *&      Form  F_BDC_OPEN
          Routine  to create BDC Session to be processed
    FORM f_bdc_open.
      CALL FUNCTION 'BDC_OPEN_GROUP'
           EXPORTING
                client              = sy-mandt
                group               = c_group
                keep                = c_keep
                user                = sy-uname
           EXCEPTIONS
                client_invalid      = 1
                destination_invalid = 2
                group_invalid       = 3
                group_is_locked     = 4
                holddate_invalid    = 5
                internal_error      = 6
                queue_error         = 7
                running             = 8
                system_lock_error   = 9
                user_invalid        = 10
                OTHERS              = 11.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
      MESSAGE S000 WITH 'Batch input session is created successfully'(T02).
      ENDIF.
    ENDFORM.                    " F_BDC_OPEN
    *&      Form  F_PROCESS_BDC
          Processing of BDCDATA Structure
    FORM f_process_bdc.
      LOOP AT t_mdata.
        PERFORM f612_view_sort.
        PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0060'.
        PERFORM f_bdc_field USING 'BDC_CURSOR'
                                      'RMMG1-MATNR'.
        PERFORM f_bdc_field USING 'BDC_OKCODE'
                                      '=AUSW'.
        PERFORM f_bdc_field USING 'RMMG1-MATNR'
                                      t_mdata-matnr.
        PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
        PERFORM f_bdc_field USING 'BDC_CURSOR'
                                  'MSICHTAUSW-DYTXT(01)'.
        IF w_data-anzd70 > 18.
          PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                      '=P+'.
          PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0070'.
          PERFORM f_bdc_field  USING 'BDC_OKCODE' '/00'.
        ENDIF.
    reading the t_bildtab internal table
        READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
        IF t_bildtab_dup-kzanz = 'X'.
          PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                        w_data-field1.
          PERFORM f_bdc_field       USING w_data-field2 'X'.
          g_flag = 'X'.
        ENDIF.
    reading the t_bildtab internal table
        READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
        IF sy-subrc EQ 0.
          g_flag = 'X'.
        ENDIF.
        IF t_bildtab_dup-kzanz = 'X'.
          PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                        w_data-field3.
          PERFORM f_bdc_field       USING w_data-field4 'X'.
          g_flag1 = 'X'.
        ENDIF.
        IF g_flag = 'X' AND g_flag1 = 'X'.
          PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
          PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                        'RMMG1-VTWEG'.
          PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                        '=ENTR'.
          PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                        c_werks.
          PERFORM f_bdc_field       USING 'RMMG1-VKORG'
                                        c_vkorg.
          PERFORM f_bdc_field       USING 'RMMG1-VTWEG'
                                        c_vtweg.
          CLEAR g_flag.
          CLEAR g_flag1.
        ELSE.
          IF g_flag = 'X'.
            PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
            PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                        c_werks.
            PERFORM f_bdc_field      USING 'BDC_OKCODE' '/00'.
          ELSE.
            IF g_flag1 = 'X'.
              PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
              PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                            'RMMG1-VTWEG'.
              PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                          c_werks.
              PERFORM f_bdc_field       USING 'RMMG1-VKORG'
                                            c_vkorg.
              PERFORM f_bdc_field       USING 'RMMG1-VTWEG'
                                            c_vtweg.
              PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                             '=ENTR'.
            ENDIF.
          ENDIF.
        ENDIF.
    *Processing of SCM View
        PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '4000'.
        PERFORM f_bdc_field       USING 'BDC_CURSOR' 'MARC-ZZJP_DOS_FRM'.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_DOS_FRM'
                                      t_mdata-zzjp_dos_frm.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_APRN'
                                      t_mdata-zzjp_aprn.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_CON_ID'
                                      t_mdata-zzjp_con_id.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_NYU_SOP'
                                      t_mdata-zzjp_nyu_sop.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_WEI_TAB'
                                      t_mdata-zzjp_wei_tab.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_CAR'
                                      t_mdata-zzjp_car.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_CAS'
                                      t_mdata-zzjp_cas.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_CAR_SIZE'
                                      t_mdata-ZZJP_CAR_SIZE.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_CAS_SIZE'
                                      t_mdata-ZZJP_CAS_SIZE.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_RUPQTY'
                                       t_mdata-ZZJP_RUPQTY.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_BIO'
                                      t_mdata-zzjp_bio.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_ITF'
                                      t_mdata-zzjp_itf.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_INIT_LS'
                                      t_mdata-zzjp_init_ls.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_RE1'
                                      t_mdata-zzjp_re1.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_RE2'
                                      t_mdata-zzjp_re2.
        PERFORM f_bdc_field       USING 'MARC-ZZJP_RE3'
                                      t_mdata-zzjp_re3.
        PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
    *Processing of SD View
        PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '4000'.
        PERFORM f_bdc_field       USING 'BDC_CURSOR' 'MVKE-ZZJP_PRO_ID'.
        PERFORM f_bdc_field       USING 'MVKE-ZZJP_PRO_ID'
                                      t_mdata-zzjp_pro_id.
        PERFORM f_bdc_field       USING 'MVKE-ZZJP_BU_ID'
                                      t_mdata-zzjp_bu_id.
        PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_NAME'
                                      t_mdata-zzjp_abv_name.
        PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_ID1'
                                      t_mdata-zzjp_abv_id1.
        PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_ID2'
                                      t_mdata-zzjp_abv_id2.
        PERFORM f_bdc_field       USING 'MVKE-ZZJP_SPL_ID'
                                      t_mdata-zzjp_spl_id.
        PERFORM f_bdc_field      USING 'BDC_OKCODE' '/00'.
        PERFORM f_bdc_dynpro      USING 'SAPLSPO1' '0300'.
        PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                      '=YES'.
    perform f_bdc_insert.
    REFRESH T_BDCDATA.
      ENDLOOP.
    ENDFORM.                    " F_PROCESS_BDC
    *&      Form  f_bdc_dynpro
      p_prog is the program name to which data is passed                *
      p_dyno is the screen number to which the data is passed
        Routine for populating the BDCDATA structure with the
        Screen related information
    FORM f_bdc_dynpro USING    p_prog
                               p_dyno.
      t_bdcdata-program  = p_prog.
      t_bdcdata-dynpro   = p_dyno.
      t_bdcdata-dynbegin = 'X'.
      APPEND t_bdcdata.
      CLEAR t_bdcdata.
    ENDFORM.                    " F_bdc_dynpro
    *&      Form  F_BDC_FIELD
          p_fnam is the field name to which value is passed
          p_fval is the field value which is passed
       p_fnam is the field name to which value is passed
       p_fval is the field value which is passed
    FORM f_bdc_field USING    p_fnam
                              p_fval.
      t_bdcdata-fnam = p_fnam.
      t_bdcdata-fval = p_fval.
      APPEND t_bdcdata.
      CLEAR t_bdcdata.
    ENDFORM.                    " F_bdc_field
    *&      Form  F_PROCESS_DATA                                          *
         Routine to used for moving data from T_bpcs internal table to  *
         t_mdata Internal Table                                         *
    FORM f_process_data.
      LOOP AT t_bpcs.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
                  input  = t_bpcs-matnr
             IMPORTING
                  output = t_mdata-matnr.
        MOVE t_bpcs-dosage TO t_mdata-zzjp_dos_frm.
        MOVE t_bpcs-appearance TO t_mdata-zzjp_aprn.
        MOVE t_bpcs-idcode  TO t_mdata-zzjp_con_id.
        MOVE t_bpcs-prostformno TO t_mdata-zzjp_nyu_sop.
        MOVE t_bpcs-weitab TO t_mdata-zzjp_wei_tab.
        MOVE c_blank TO t_mdata-zzjp_bio.
        MOVE c_blank TO t_mdata-zzjp_itf.
        MOVE t_bpcs-uom1 TO t_mdata-zzjp_car.
        MOVE t_bpcs-uom2 TO t_mdata-zzjp_cas.
        MOVE t_bpcs-carsize TO t_mdata-zzjp_car_size.
        MOVE t_bpcs-cassize TO t_mdata-zzjp_cas_size.
        MOVE t_bpcs-rupqty TO t_mdata-zzjp_rupqty.
        MOVE c_intls TO t_mdata-zzjp_init_ls.
        MOVE c_blank TO t_mdata-zzjp_re1.
        MOVE c_blank TO t_mdata-zzjp_re2.
        MOVE c_blank TO t_mdata-zzjp_re3.
        MOVE c_blank TO t_mdata-zzjp_pro_id.
        MOVE c_blank TO t_mdata-zzjp_bu_id.
        MOVE t_bpcs-abvname TO t_mdata-zzjp_abv_name.
        MOVE c_blank TO t_mdata-zzjp_abv_id1.
        MOVE c_blank TO t_mdata-zzjp_abv_id2.
        MOVE c_blank TO t_mdata-zzjp_spl_id.
        APPEND t_mdata.
      ENDLOOP.
    ENDFORM.                    " F_PROCESS_DATA
    *&      Form  f_bdc_close
          Routine to close the BDC Session
    FORM f_close_group.
      CALL FUNCTION 'BDC_CLOSE_GROUP'
           EXCEPTIONS
                not_open    = 1
                queue_error = 2
                OTHERS      = 3.
      IF sy-subrc <> 0.
             MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " f_close_group
    *&      Form  f_bdc_insert
         routine to input batch data into the Transaction MM02 from the
         session created
    FORM f_bdc_insert.
    CALL FUNCTION 'BDC_INSERT'
             EXPORTING
                  tcode            = c_tcode
             TABLES
                  dynprotab        = t_bdcdata
             EXCEPTIONS
                  internal_error   = 1
                  not_open         = 2
                  queue_error      = 3
                  tcode_invalid    = 4
                  printing_invalid = 5
                  posting_invalid  = 6
                  OTHERS           = 7.
        IF sy-subrc <> 0.
             MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    ENDFORM.                    " f_bdc_insert
    Reward Points if it is useful
    Thanks
    Seshu

  • Sample CLASSES for different types of OIM components!!!

    Hi Experts
    Can any one provide me sample classes for different types of OIM components, adapters, scheduled tasks, etc. with your best practices for OIM java development and documentation? It would Help me lot.
    Please let us know Links/Documentations.
    Thanks
    \oim_user

    for schedulers
    1. Create a java class that extends the SchedulerBaseTask (see example below)
    2. Write your business logic
    3. Compile and jar
    4. Place the jar in the ScheduleTask directory in your OIM install
    5. Create a new scheduled task using the OIM developer console
    6. link in the new class into your new scheduled task.
    7. Done!
    Example code for a scheduled task:
    import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
    public class ScheduledtaskExample extends SchedulerBaseTask {
    public void init()
    //this method is run before execute by the scheduler
    public void execute() {
    //is executed by the scheduler
    runMyBusinessLogic();
    private void runMyBusinessLogic(){
    //place your business logic here
    }

Maybe you are looking for

  • EBP Security -  Users under single org unit

    Hi All, My Client has a question on EBP Security and I want you experts to help me in this regard, as I did not work on it before. Initial screen of transaction code USERS_GEN, its better says to limit number of users under a single Organizational Un

  • Material Created/changed in ECC needs to be updated in thirdparty system

    Hi Gurus, I have a requirement. Please help me on this. We are having a legacy system (Material Master)which needs to be replaced by ECC 6.0 and data needs to be sent to third party system via middleware as PI. we also needs to extend message type(Ma

  • Storing SUP credentials on Afaria Server

    Hi, I have a quick question to check if it is possible to read SUP credentials (CompanyIDsetting, activation code, URL prefix, UsernameSetting....) from Afaria server using a Afaria mobile device client. This would eliminate the need for the end-user

  • Strange sorting behaviour with Collator

    Hi all, I'm sorting a list of Icelandic words using a Collator and I am getting rather peculiar results (the locale is is_IS, using jdk1.6.0_20). List<String> list = Arrays.asList(         "Veiðifélag Hörðudalsár",         "Veiðifélagið Búrfell (Hólm

  • Overlaying SWF Asset with layer components - Strange behaviors.

    Hi ! I am brand new at Flash Builder and Flash Catalyst. I have been spending most of my time in Catalyst at first and realized later on that I needed some of the nice features inside of FlashBuilder. I created a few FlashBuilder components and broug