Types of purchase orders

Hello friends,
Please give me the information on types of purchase order, their meanings & when they are used.....
Thank you

Hi,
We have genearlly Inventory based order and direct order ( Consumption based ) Procurement
Depends upon the combination of Item categories and account assignment
1. Standard order ( Item cat Blank and Acc.assignment cat Blank )
2. Subcontracting order ( Item cat L and Acc.assignment cat Blank )
3. Consignment order ( K and Blank )
3. Thirdparty order ( S and account assignment )
4. Stock Transport order ( U and Blank )
5. Blanket Order (B and Acc.assignment)
6. Service order (D and acc.assignment)
7. Returns order
8.Directly consumption based order ( K- Cost centre)
9. Material unknown type order
10.Project Order
11.Free Items order
Also , We have integrated based on direct (consumption) different combination of item categories and account assignment - Purchase order also processed.
Thanks,
Thiru

Similar Messages

Material Return from 542 movement type without purchase order

HI Expert
I have a problem regaring material return from vendor through 542 mov type against purchase order.
when i transfer material to vendor with mov type 541. and after grv if we return material from vendor against purchase order.
system doesnot allow to return material against purchase order. it allows mov type 542 for returning material from venodr without pruchase order.
Suppose we have 10 quality for a component to transfer vendor we take grv and issue 5 qty through 543 move type automatically. if we want to take return 5 remaining qty from vendor against purchase order .
system doesnot allow to return component from vendor against purchase order.
but allow to return component from vendor without purchase order.
vendor stocks becomes less but purchase order still open for open quantity.
how we could control vendor's returing material with the reference of purchase order after grv.
with regards
sanjay agrawal

HI,
Are you creating return Po for subcontracting vendor with item category L.?
we used movement type 541 to send material to vendor ,now you want movement type 542 in system means take back from vendor?
I don't think so it will make work and make any sense
why you are not adjust your component with subcontracting adjustment in sap mm
check following link
[http://help.sap.com/saphelp_470/helpdata/en/4d/2b908943ad11d189410000e829fbbd/content.htm]
Regards
Kailas Ugale

Default output type in purchase order

Dear All
i have short and easy question:
how can i set one output type(like NEU) as default in purchase order as when create P.O output type automatically comes from customizing?
best regards
R.T

Hi,
If you have done all customizing setting & maintain condition record for message type in t.code : MN04. Now Just fine tune the output (message) type in following path:
SPRO>MM>Purchasing>Message>Output control>Message tyoes> Define message type for Purchase Order-->Fine-Tuned Control: Purchase Order
Now here select the check box corresponding to your output(message) type NEU to have print output for this message type is automatically displayed & save.
Now try creating PO & u will have default message type.
Regards,
Biju K

Changing a Message type on Purchase Order

Hi guys,
How can I change a standard message type on Purchase Order ?
For example :
On Purchase Order, when a insert a new Contract item number, occurs the Error message below :
'Contract vendor 610065 differs from vendor 610195'
But, I neet to change this message type from 'Error' to 'Warning' in some cases.
How can I do this, please ? I'm learning OO now and I have some difficulty yet..
tks
Flavio

I found a Method 'PROCESS_ITEM' in a Badi 'ME_PROCESS_PO_CUST' that the piece of code bellow. I tried to insert the code :
message e047(06) with '12345'.
but... the message 47 didn't change, and this message only was added to messages.
define mmpur_message.
    gl_tabix = sy-tabix.
    gl_subrc = sy-subrc.
    message id &2 type &1 number &3 with &4 &5 &6 &7 into gl_dummy.
    call method cl_message_mm=>create
      exporting
        im_msgid = &2
        im_msgty = &1
        im_msgno = &3
        im_msgv1 = sy-msgv1
        im_msgv2 = sy-msgv2
        im_msgv3 = sy-msgv3
        im_msgv4 = sy-msgv4
      exceptions
        failure = 01
        dialog   = 02.
    if sy-subrc = 1 or sy-subrc = 2.
      message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    sy-subrc = gl_subrc.
    sy-tabix = gl_tabix.
end-of-definition.

Reg.Output type for purchase order

Dear Sir
I followed your steps but not come to "List of allowed output"
when I select the message for Purchase order(ME21N). There are listing NEU,SPO,MAHN and AUFB.
I just copy the NEU and all,I did not change anything.
Maintain Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Ex:
EF---> TES
Select TES and double click on Mail title and texts and go to
EN- New Purchase Order Print Out,
Select TES again and double click on Processing routines,
Select TES again and double click on Partner Roles
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO(ME21N) and save it. Go to ME22N and print the PO by giving output type TES.
Please help me sir
Rajj

Hi
Go to NACE
Select application as EF Purchase Order
Define TES as out put type there
Vishal...

Suppress Output type in Purchase order 'message' tab

Hi,
Can any one suggest how to suppress the existing output type in purchase order ' selecting from list of output's from message tab'.
We need in database and should not delete. can it be possible to hide from list in PO that user cannot select that output.
Thank You,
Bhanu.

Bhanu,
I got your requirement, but could you please let me know on what scenario you need this, because if you need the system to perform like this only when there is some specific fields in the PO, like for eg, P.organisation, or vendor, or Document type etc,,,,anything specific to this,.....then i think if you create a table which will exactly show your target values, like grouping DOC+P.ORG+VN, or any other combination, and then assigning this to one access sequence which will in turn get assigned to the Output type which you want, then i think only that output type will pop up as the other one is not assigned to the access sequence or the combinations you set. Likewise you can suppress one Output type.
Regards,
Sankar

Condition Type for Purchase order

Dear All,
I have one query about condition type at item detail level in purchase order.
Please let me know how to disable any condition type for purchase order.
I have already tried it in, SPRO->Materials Management->Purchasing->Purchase Order->Define Screen Layout at Document Level.
But not found it there.
Regards,
Mahesh Wagh

Dear Ganti,
>OMF4 - Materials Management >Purchasing > Purchase Order Processing >Define screen layout at document level
1. No such T Code OMF4 found (I ma using ECC 6.0)
2. NO Such Customizing Menu path sound in SPRO.
Pls elaborate......
Regards,
Mahesh Wagh

Custom Exchange Rate Type for Purchase Order

Hi
Our Financial Team doesn't want to change the Exchange Rates on a daily basis, but for place purchase orders with our overseas vendors we need the daily spot rate loaded in the system.
Is there way to configure a different exchange Rate type ? and use this Exchange Rate Type for Purchase Order to use instead of Default type "M"?
Thanks...

Found a soluntion ...
I have coded userexit EXIT_SAPLMEKO_001 component LMEKO001, to fill in Exchange Rate type in the Communication Structure "e_komk-kurst".
Update Exchange Rate Type "ZCUS" under SPRO and updated exchanges in TCURR table for this type. Then, everything else works like a charm.

Disable info record by type of purchase order

Dear All,
Can I disable the field "InfoUpdate" in the purchase order by type of purchase order?
We need, when we create a new purchase order we don´t want to bring SAP info record information by type of purchase order.
Regards,

Hi Josiane,
Do you want the field not to be checked by default? This can be done by means of "default values for buyers", trs OMFI. Select a code that you normally use (or create a new one) and on the first tab you have "Info record update - Purchase order". Make this field be empty. Then assign the "default values" code to each user by means of the user parameter EVO.
If you need different defaults by PO types rather than by the user, this will be BAdI ME_PROCESS_PO_CUST, method PROCESS_ITEM. Here you can check which document type was assigned to the PO by calling IM_ITEM->GET_HEADER.
BR
Raf

Condition Type the purchase order

Hi Guru:
Can anyone tell me that which table/transaction to include all the condition type of purchase order? Thanks.

hi
The Table name you can used are
KOMV: Pricing Communications-Condition Record
KONV: Conditions (Transaction Data)
From the above tables you can refer the fields below.
KAWRT
KBETR
Regards,
Manish

Assign output type to purchase order

Hi Friends,
I have defined an output tyoe for my purchase orders. I want to assign this output type to my PO such that whenever I create a new PO I dont have to assign the output everytime to take printout.
Can someone please help me how to achieve this.
Regards,
Wasim.

Hi,
As all customizing setting done for PO print out & then maintain condition record for message type in t.code : MN04 with PO document type combination with other details
Now Just fine tune your output (message) type for Purchase Order in following path:
SPRO>MM>Purchasing>Message>Output control>Message tyoes> Define message type for Purchase Order-->Fine-Tuned Control: Purchase Order
Now here select the check box corresponding to your output(message) type to have print output for this message type is automatically displayed & save.
Now try creating PO & you will have default message type in the PO
Regards,
Biju K

Predefined object type for Purchase order release stratergy

dear experts,
There are already predefined object type for purchase order like bus2012 where i can create new events and methods. I want to know is there any predefined objects for purchase order release strategy. The requirement is there i want to define method, that should display the po release screen. If i bind this method with work flow template, mail should be triggered and if i click the mail po release screen should be opened for respective material...
regards,
Kandhan G

Hello
I'm using the BUS2012 Object type in workflow task but in simulation the task run correct but in the transaction when modify a purchase orden the task send an error...
maybe the error is similar...did you solve this problem?..
Thanks!
Wladimir E.
[email protected]

LIV Authorization for a particular type of Purchase Order

We are having a particular type of purchase order.We want to give permission only to a particular user,who will be able to do LIV related to only this type of purchase order,
Example.
Purchase order type is : NZ:PO for issue to vendor.
we want when user run t.code MIRO,he only posting NZ document type of P.O.
Can anyone help me how I configure it.........
Thanks in advance
Bhuban

Hi,
Unfortunately there is no standard SAP option for this.
The existing authorisation config does not include a check for the PO document type.
If you really must have this then you need to get your ABAP programmer to look for a suitable user exit and control it this way.
It might make the coding a bit easier if you give this docmunet type a unique number range e.g. 9900000000 to 999999999, so that the code only has to check the doucment number entered without having to read the PO and obtain the document type.
Steve B

Define new document type for purchase order

Hello
I want to create a new document type for purchase ordre with also new number range.
And within my conditions, the shopping card will be generate either document type ECPO with number range 44 or document type ZOS with number range 33.
The document type is still a purchase order.
Is it possible to do that? To assign new document type for purcharse order?
If yes, is there any Badi to put my conditions of generation of my document type?
Thank you for your help.
Regards,
Peggy

Hi Markus
Thank you four your response. Unfortuntly, i do not want to create a new transaction type.
It is still a purchase order which could be visibled in standard transaction. The behaviour is still like standard PO, and could be visible in standard transaction PO.
I just want to create 2 types of purchases orders to identify them, so create a new number range and so a new document type for purchase order..
I have a condition to do "the shopping card will be created in this document type, and this schopping card will be created in this document type".
But standard document type is ECPO, and I don't really know if it is possible to create new document type for purchase order...
Peggy.

Valution Type in Purchase Order

Dear All,
Thanks in Advance.
Requirement : Based on the Material in the Purchase Order Item, the Valution Type trigger Automaticaly.
Here i am having Two types of valutions 1) IMP-RAW and 2) DOM-RAW.
For Import Document Type, generally user will select import materials only. Now for that materials system shoud populate automaticaly the valution type in the DELIVERY tab.
Is there any Enhancement / Enhancement Spot / BADI or can possible through Customizing.
Regards:
Sridhar.J

Hello,
There are few user exits available for the PO transaction. It would be better if you can check with your developer on this (EXIT_SAPMM06E_013).
As soon as the user enters the material number in the PO item and press enter, this code can be activated. so better would be to write this code in the user exit which gets initiated during that time.
Regards,
Sakthi

Types of purchase orders

Similar Messages

Maybe you are looking for