Types of testing performed in different projects

Hi SAP Guru's
Please tell me Types of sap testing performed in sequence in different projects
Implement projects==>
support projects==>
roll-out projects==>
migration projects==>
migration projects==>
thanks
Naresh

Hi Gomatheeswaran,
Thanks for your information...Very helpful..
Thanks
Naresh

Similar Messages

Eclipse Confusion: Different project types

I have a JSP project that I'm working on in Eclipse. It's such a pain because I need different project functionality like JSP, JSF, JBossIDE, etc...the problem is that each functionality is part of a different project type.
i.e. When you select File -> New -> Project, there are different project types. Any project can only have one type (or can it?). So if I need multiple functionality within a project, how do I make this happen?
Obviously you wouldn't limit yourself to just one functionality because of the IDE's limitation...
Is it possible to combine multiple projects into one complete project? This seems like such a disgusting and difficult solution...files split apart into different projects just because one uses JSP and another uses JSF and another uses EJB...
How do you deal with this?

Is that possible?
If no,what else solutions can I have for choice to achieve the goal.
Can make against the reservation and do goods movement into different accounting subject.

Regarding Testing phase in Implementation project

Hi FI/CO gurus
I would like to know about the testing phase in implementation project like
1. What are the different types of testing done by a SAP FI/CO consultant after configuring the relavent objects in implementation project, pls provide with one example of your experience?
2. what is the difference between SAP version 4.7 and ECC 6.0 in FI/CO point of view?
3. Please tell me what are the main responsibilities of a SAP FI/CO consultant apart from configuring objects in implementation project?
hopes for the positive reply. Thanks in advance.
Regards
Sree

Hi FI/CO gurus
I would like to know about the testing phase in implementation project like
1. What are the different types of testing done by a SAP FI/CO consultant after configuring the relavent objects in implementation project, pls provide with one example of your experience?
2. what is the difference between SAP version 4.7 and ECC 6.0 in FI/CO point of view?
3. Please tell me what are the main responsibilities of a SAP FI/CO consultant apart from configuring objects in implementation project?
hopes for the positive reply. Thanks in advance.
Regards
Sree

How do I view multiple images from different projects at the same time?

Hello
I've been trying to find the answer in the user manual, but no luck so far.
I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
Thank you
Elizabeth

Thank you again Tony
I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
Elizabeth

Calling Sub Report which is in Different project

Hi All,
Can we Call sub Report which is in different project? If so, How? Can you please help me out.
Thanks
sush

Hi susheel1347,
In Reporting Services, when we call a sub report, in the Subreport Properties, we can only select the report in current project (from the drop down list) as a subreport. If we type a report which is in another project, this report can't be found
and it will return the message like below:
So your requirement can't be achieved currently, we suggest you copy that subreport into current project.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Can any one explain about the SAP Testing process in Implementation Project

Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..

hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus

Can I re-use a parameterized manual test case with different set of parameters in a different test plan?

Can I re-use a parameterized manual test case with different set of parameters in a different test plan without impacting the parameters in the first test plan?

Hi ssteele_1,
Thank you for posting in MSDN forum.
Generally, I know that if you want to re-use a parameterized manual test case and without impacting the parameters in the first test plan.
I suggest you could try to right click this parameterized manual test case ->Select the Create copy and add to suite option like the following screen shot.
Then the parameterized manual test case can be re-used as a new test case in this MTM and it will did not impact the original parameterized manual test case.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ChaRM and test management in implementation projects

Hi
I am doing implementation projects in solution manager. i have activated charm in the project so as to transport all the changes related to the project with the project lifecycle.
I have got confusions regarding CHarm and Test MAnagement.. when we activated CHaRM the tester can logon to the system and perform testing and pass the Change Document to the next phase.
What is the standard flow when both CHaRM and TEst Management for a project exists??
Thanks

Please can someone tell me how to use TEST MANAGEMENT and ChaRM for Implementation Project together??
Edited by: Hasan Sidra on Jan 2, 2012 11:11 AM
Edited by: Hasan Sidra on Jan 2, 2012 11:11 AM

A totally different project is played when project is played in full screen view and project is not editable

Hi
I have problems with my imovie 09. After several days of work with an imovie project I was again about to start editing my project after startup of my mac. I played through the project and everything seemed fine, but when a movie clip was moved infront of a still picture instead of after, the whole project became uneditable and unplayable. When trying to play the project in full screen mode a totally different project is played. Shutting Imovie and/or the mac down does not help. In some cases I have managed to get the red cursor moving along in my project. However, no movie is played in the screen in the right hand corner, -it is totally black, and the audio is again from a totally different project. I am not able to export the project as all the export options are grey. Some of the other projects worked fine and some did not, -and the functionality seemed a bit random from time to time after rebooting/ exiting and reentering imovie. My first guess would be that this is a memory porblem. However, looking at my activity monitor it seems that I'm only using 1.73 GB of system memory of a total of 4....I have tried remove old projects and also quite a bit of clips in my library to minimize memory use. Now it seems that all the rest of the projects are working fine, but my current project is still corrupt. I have tried copying the first clip of my project into a blank project, but it will only play in full screen mode, not in the screen in the right hand corner.
I am working on a mac mini with 2.26 Ghz intel Core 2 Duo, 4GB 1067 MHz DDR3.
I would be very grateful if anyone out there could help me out...Is my project totally corrupt beyond the point of no repair? Why has this happened, and how is it possible that something like this can happen without any kind of warning?
Thanks!

Thanks for your reply AppleMan1958. Unforunately the playback problem was only experienced in the project described, - all other projects played fine....and I tried a lot of different ways to do it...so I really believe the whole project, including the playback (which did not work in the editing window in the right hand corner either, -nothing was shown there and the red marker line would not move across the project) just suddenly become totally corrupt...However, after deleting the project as described above and installing imovie11 I have done the whole thing over again and completed the project without problems this time.
But thanks for the tip anyway!

Dynamic link confusing two separate AE compositions in PPro from different projects

I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
Any help with ths problem would be appreciated,
J

Thanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
Date: Mon, 24 Oct 2011 19:47:03 -0600
From: [email protected]
To: [email protected]
Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
    Re: Dynamic link confusing two separate AE compositions in PPro from different projects
    created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Invoking a process in a different project & deployed on same engine

Hi,
I would like to know if we would be able to invoke a process with is already deployed in the engine from a new process. Please note that both the processes would be in different projects but will be deployed on the same engine. Also, we would like to avoid using any polling activity for this purpose and would want the process to get invoked like a process creation activity. Please let me know if anyone has tried this or have any idea for dealing with such situations.
Thanks,
Sree

You can do this using the process interfaces. The steps are.
1.- Create a process interface of the process that you are going to call that is in Project 1, select the process right button and generate process interface.
2.- Export this interface and import in your project (Project 2) that is going to be where you will call the process.
3.- Put a process creation activity that and put as the related process this interface.
In this way when you publish both projects in enterprise the interface is not going to be deployed, it will be deployed the real process and when the call is made it will call the real process of Project 1.
Hope it helps

Different movement types for Goods Issue for different Order Types

Hello Experts,
Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
Thanks and regards,
Satyajit

Satyajit,
Folow the link given,
Re: How to add new movement types when creating reservation?
Hope this helps you.
SmanS

Can I work on a different project in After Effects while rendering another (AE) project in Media Encoder?

(I'm using the current AE CC 2014)... I've tried twice to start working on a project in After Effects while a DIFFERENT project is rendering in Media Encoder. Both times it (Media Encoder) hung up/crashed. I thought the point of a separate encoder program was so I COULD work on another project in AE at the same time another project was rendering in Media Encoder.
Am I doing something wrong, or do I just have to WAIT for the encoding in Media Encoder to finish before I can do other things in AE?
[I tried searching through help. If I it's there... I just missed it.]
Thanks (in advance) for the help.

AaronJamesLee wrote:
Am I doing something wrong, or do I just have to WAIT for the encoding in Media Encoder to finish before I can do other things in AE?
You should wait.
What are the specs of your computer?

Two different projects spliced together over each other some how?

Greetings everyone,
I thought forum users might be interested in this one. I don't use the forum often so I don't know the history but has anybody ever had two different projects spliced together over each other some how? For example, I was tweaking a project and left it alone for several months. I came back today to work on it and clips from other projects were in it some how. Also the audio from the new clips were in the new project and overriding the existing project. Does anybody know how to restore the two and make them separate them without losing any info. from either one? The thing's a mess. I had 1 video track w/ some subtitles, a voice over, and some music in the background. Now it has two video clips, and two of everything else. It's crazy. I don't think it's a virus or anything. Nothing else on my machine is acting strange. I hope nobody else has experienced this yet can help.
Peace

If you have a backup external drive and Time Machine, I would suggest the following:
Locate this specific clip in your Finder. Highlight it and rename it "old", or something similar.
Launch Time Machine.
Go back to a date in time when this clip was as you properly edited it.
Again, make sure Finder is still open and highlight the clip.
Click "restore" in Time Machine.
Open iMovie and you will see your project as you had it all those months ago.
This works for me when I have an iMovie project behaving badly.
iMovie is a great application: but just like us, it has good days and bad days.
Dan

How to copy test cases from one project to another?

Currently we have several projects withing the oracle test manager suite with test cases in each of them. I need to be able to copy some of the test cases to other projects or atleast select them to run under a new project instead of retyping them everytime. Is there a way to do this? I see that I can copy within a project and paste but have not be able to find way to do it outside of a project. Maybe there is a way to export and then import? Any ideas would be helpful?
Thanks

Hi
You can always export a test Summary table Report in XLS and import it in the new project, however that will not give you results or test steps but at least is a start.
Also there is something called Data Links have a look at the help file you may be able to use that when creating test cases, you could create the test case in CSV first and then upload it to multiple projects using the data link.
Hope this helps
Alex

Types of testing performed in different projects

Similar Messages

Maybe you are looking for