Typical issue while approving workitems from SBWP.

Hello All,
I have an issue while approving workitems massivley from SBWP. I think we can approve bunch of workitems which corresponds to a single task at once.
But for me iam not able to approve all the related workitems at once. When i select and try approve , it asks me to approve one at a time ( i get screen by screen) . Where some are able to approve at once, i verified my user settings with them and every thing seems to be normal ( Parametes of SU01D).
What could be the reason, please suggest.Its very important for me.
Regards
Mahesh.

Hi,
Sometimes mass approvals are needed. At my client there is a rule that ALL refunds need to be approved by a person - they cannot go out automatically.
So we allow multiple (small-value) refunds to be selected by one user and approved en-masse. It works quite well in SBWP.
As for the problem being discussed, if it works for one user, it should work for all. Are there differences in authorizations between the users?
cheers
Paul

Similar Messages

Approve workitems from outlook

Dear Experts,
I want to approve workitems from outlook. I learnt that we can use Microsoft Duet for this. Can you please tell me whether Duet can be used for approval from outlook for both standard workflows as well as custom workflows. Also please tell me whether irrespective of workflow being standard or custom the features, content and process of approving workitems from outlook, will it be the same for both the case. Or will there be any features or functionality that will be missing or can't be incorporated in case of custom workflows. Will only a link be displayed in outlook clicking on which it will open the workitem or will the workitem similar to that displayed in SBWP be displayed. In caseof link then it will a round about way of approving from SBWP.
I also learnt that this can be done by extended notifications. Can workitems be approved in case of using extended notifications or just notications can be sent using this. Please highlight me in this regard.
KR,
Bharath
Edited by: bharath padmanabhan on Oct 27, 2009 8:44 AM

Hi bharath ,
You are asolutely right ,there are 2 appraoches -
1) Microsoft Duet
SAP provides Leave Management in Duet .
With duet , any SAP workflow approval step can be handled Through Microsoft outlook .
For this the prerequisites are
a) MS office client
b) MS windows server
c) SAP ERP
d) MS exchange
in Duet the user is logged on to windows and gets validated with SAP,
you can search more on leave management through duet .
2) extended notifications
In extended notification , workflow work item would be sent in MS outlook inbox .User will be asked to provide SAP login and id and password to access the workitem .This will open SBWP for them .
this can be checked using report RSWUWFML2.
http://wiki.sdn.sap.com/wiki/display/ABAP/Workitemintimationintheemail
you will find a lot on this in sdn .
hope this helps.
thanks,
sahiba

Issue while loading data from DSO to Cube

Gurus,
I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
All the loads are managed through Process Chains.
Would there be any reason in specific/particular for this type of problem?
Any pointers would be of greatest help !
Regards,
Yaseen & Soujanya

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Special character issue while loading data from SAP HR through VDS

Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
Thanks

We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards.

Error in RAR while approving request from CUP

Dear GRC Gurus,
I am getting error while approving request in CUP for RAR. Checked the related threads for this issue but still not getting any solution.
Connectors are working fine. Also web service URL is maintained correctly and password for the same is working fine in backend.
Error message is
Risk analysis failed: Exception in getting the results from the web service : Service call exception; nested exception is: java.rmi.RemoteException:
Pl help.
Regards,
Muskaan

Hi ,
You need to clarify what you are trying to do, type of request, timeout time, moment it fails...
If you are referring to the RAR SOD web-service call from CUP, the timeout defined may be too short, problems on the web service/backend connectors configuration or performance/resources available. I advise you to see the SAP Notes below.
Troubleshoot issues with risk analysis, see the SAP Notes 1136379, 1049058, 1145700, 1234807, 1085586, 1061088, 1003239, and 1166368.
This is the most common issue between CUP and RAR when running the SOD analysis, and some times the only solution is to improve the performance of the server with more memory/processor.
Regards,
N

Issue while uploading data from flatfile to Transaction(VK13).

Hi All,
I am facing an issue while uploading the data from flatfile to the transaction(vk13). My flat file is as shown below.
SalesOrganization DistributionChannel Customer Material Releasestatus Amount Currency Quantity UOM ValidFrom ValidTo
2000 01 0010029614 AT309739 A 20.00 USD 1 PC 09/11/2014 12/31/9999
If I upload these data using the RV_CONDITION_COPY FM it is succesfully uploading to the relevant tables(konh,konp) but in the tcode VK13 I am getting all values fine, except UOM. Instead of PC it is showning as ***. I did not understand why it is happening please give an idea to solve my issue.
Regards,
Chakradhar.

Hi Raymond,
Thanks for your reply.Yes,If I use CONVERSION_EXIT_CUNIT_INPUT in my program the issue is, Assume If the user is giving PC as value for UOM field in flat file and upload the flat file.It is successfully uploading the value PC to the UOM field in transaction VK13 but the in the database table(konp) it is showing the value as ST.
Regards,
Chakradhar.

Deadlock issue while sending data from PI to JDBC !!!

Hi All,
We are getting below error while sending data from PI to JDBC (Database).
Error - JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'store_order_details' (structure 'Order_details_Statement'): com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 61) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
This is happening when more than one PI message is trying to deliver data at the same time to database.
Can anyone let us know the root cause of this issue and how we can rectify this.
Is there some setting which we can use to do parallel processing as Delivering one message at a time to database is causing performance issues & taking lot of time.
Thanks
Neha Verma

Hello Neha,
Strange but can please get below information.
Please check with the DB admin about if the user is getting locked or is there any hanging threads related to user.
Also confirm with DB admin if the exclusive lock is on table or on the row when you try insertign or updating information.
You can share the user from the receiver channel.
Regards,
Hiren A.

Forward mail with attachment (not WorkItem) from SBWP to Outlook

Hallo,
we want to forward mails (not WorkItems) form SBWP to Outlook.
The forwarding works fine for the mail but if the mail includes an attachment from type object (e.g. send object with note in MM03) we are not able to open the object in the mail. We want to open the object so that automatically SAP GUI is started and the corresponding object is shown in SAP.
In SBWP we are able to open the attachment in Outlook not. Are there any settings in SAP where we can define that.
Have we to define something parameters of the Integrated ITS?
We want the same behaviour for mails with attachments as for WorkItems if they are forwarded to Outlook.
We get an HTML mail in Outlook like
If you are not forwarded automatically, use the following link:
If the link is not to a valid server, log on to the SAP system and check the following object:
System: XYZ
Client: 300
BOR Object Type BUS1001006
BOR Object Key 0000700075
But there is no link to follow in the mail and nothing happens.
Thanks
Edited by: Arnfried Doetsch on Sep 29, 2010 10:28 AM

Hello,
Check if your SMTP node in transaction SCOT is configured to send attachments of all types.
Have a look at the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/08/e043c4c18711d2a27b00a0c943858e/frameset.htm
Regards,
Siddhesh

Facing Issue while Extracting Data from Essbase using CalcScript

Hi All,
we are getting this error while extracting data from Essbase by CalcScript using ODI.
Does anyone have the answer
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5046.f$0(<string>:1)
     at org.python.pycode._pyx5046.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Hi Now i am getting this error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5054.f$0(<string>:1)
     at org.python.pycode._pyx5054.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Currency conversion issue while creating PO from Shopping cart

Hello Experts,
I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
Scenario:
Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
Please give me some idea how to fix this issue.
Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
Regards
Pratap J

Hello,
Read information available in KBA 1862453.
It mentions this issue.
Regards,
Ricardo

Issue while sending SMS from JavaMail in languages like Russian & Japanese

Hi,
We have a requirement to send multi lingual SMS to users mobile number.
We are using JavaMail API for this. The only changes we have done to send SMS (instead of EMAIL) using a standard JavaMail code are –
1)     Use the suffix @sms after the mobile number. For eg: 919923456789@sms.<domain>.com.
2)     Use “text/plain” instead of “text/html” while setting the content type.
The SMS is sent fine for English and French but we get junk characters for languages like Japanese and Russian even on phones which support these languages.
Could anyone please advice on the below points –
1)     Is this a limitation with respect to JavaMail? If yes, is there any other api that can be used?
2)     Does some setting needs to be done in the SMS gateway to enable sending SMS in Japanese and Russian?
3)     Does some setting needs to be done in the mobile phone to receive SMS in Japanese and Russian?
Any help on this issue will be appreciated.
Thanks and Regards,
Jacob

Thanks for your replies...... Please find below the code snippet where I am setting the encoding.....Could you please confirm if this is the correct way?
String subject = "\u0421\u0442\u0430\u0442\u0443\u0441 \u043F\u043E\u0441\u043B\u0435\u0434\u043D\u0435\u0433\u043E \u043E\u0431\u043D\u043E\u0432\u043B\u0435\u043D\u0438\u044F";
String body = "\u0421\u0442\u0430\u0442\u0443\u0441 \u043F\u043E\u0441\u043B\u0435\u0434\u043D\u0435\u0433\u043E \u043E\u0431\u043D\u043E\u0432\u043B\u0435\u043D\u0438\u044F";
*//Both 'body' and 'subject' are set as the russian translation of 'Status last updated'.*
MimeMessage msg = new MimeMessage(mailSession);
msg.setHeader("Content-Type", "text/plain; charset=UTF-16");
msg.setSubject(subject, "UTF-16");
msg.setText(body, "UTF-16");
I tried this but still not getting correct text. If I try with "UTF-16BE"/"UTF-16LE", then I do not get an SMS at all. I have tried with UTF-8 as well.
Does it matter if I change the phone language before/after I receive the message in a language different from the currently set phone language?
I am based out of India and am trying to send these messages to some of my colleagues who are all using Indian service providers. I have tried this on phones which have Russian as a language option.
Regards,
Jacob

Linking issues while Migrating code from SUN CC 4.3 to SUN CC 5.8

Hello,
I am migrating code written in SUN CC 4.3 to SUN CC 5.8
I have compiled entire code with SUN CC 5.8 with -compact=4 option ,on machine with OS SunOS 5.8 Generic_Virtual sun4v sparc sun4v.
during linking phase i am facing issues like
(cd msggen; make CG="-fast -O3 -compat=4 -lC -features=extensions -i" all)
/opt/SUNWspro/bin/CC -o msggen msggen.o licensemessage.o ../../../../libs/lib/libgeneral.a
Undefined first referenced
symbol in file
cerr ../../../../libs/lib/libgeneral.a(string.o)
unsafe_ostream::operator<<(long) ../../../../libs/lib/libgeneral.a(string.o)
operator delete(void*) msggen.o
operator new(unsigned int) licensemessage.o
Iostream_init::Iostream_init(void) msggen.o
Iostream_init::~Iostream_init(void) msggen.o
istream::operator>>(char*) ../../../../libs/lib/libgeneral.a(string.o)
setw(int) ../../../../libs/lib/libgeneral.a(string.o)
unsafe_ostream::outstr(const char*, const char*) ../../../../libs/lib/libgeneral.a(string.o)
exrethrow_q msggen.o
ld: fatal: Symbol referencing errors. No output written to msggen
I felt like these issues are due to the standard header files. I am including the headers which comes with SUN CC 5.8 and I am using Rogue Wave rwav/ver09.1.
I am not getting any pointers to solve this issue,any pointer will be highly appriciated.
Thanks in advance,
Revathi R

975741 wrote:
Yes i did migration by following the Migration Guide, while Migration i ve come across situations where a class method is invisible at many situations like...
C.h
class C
f1();
B.h
#include<C.h>
class B
f2();
A.C
#include<B.h>
class A:B
f1();-----> Error Not accessible so I changed to C::f1() then worked like this I ve came across many will it be a Problem, in migration Guide i haven't seen any of such.
}When you post a code example, it is best to copy/paste from actual code that you verified shows the problem. This example is nowhere near valid for any compiler, even with your suggested change.
- The class declarations are not terminated by a semicolon
- You can't call C::f1() using that syntax outside of class C or a class derived from class C because it is not a static function, and requires an object. You could call it as c.f1() if you had a c object of type C, except that f1() would still not be accessible.
The rules about accessibility have never changed. Please post an example that actually works with C++ 4.x or with C++ 5.x in -compat=4 mode, but that fails with -compat=5 mode.
>
Like this for operator overloading also , I haven't got any way to make function body available to function call, so i ve changed those functions to normal functions...I don't understand what you mean. An example would help.
>
what is a template cache?? How to delete it??
The template cache is also known as the template repository. See section 3.3.5 Template Repository in the Migration Guide. To delete the cache (repository) just remove the entire cache directory.
>
>
Another task of mine is, i am compiling a code written in SUN CC 5.5 to 5.8, would you suggest me the migration guide, I could get from 4 to 5 and 3 to 5 but
not from 5.5 to 5.8, I am not sure about in which compiler code is written but, I could able to compile the code with out compact option with SUN CC 5.5, CC 5.5 and 5.8 are fully compatible. There should be no migration issues. The exceptions would be invalid code that compiled due to a bug in the earlier compiler but is correctly diagnosed as an error with the later compiler. In rare cases, the later compiler has a bug not present in the earlier compiler (a regression). When found, regressions are fixed in patches. If you have an Oracle service contract, you can download patches from My Oracle Support. Otherwise, get the most recent compiler, which should not have those regressions.
but while trying to compile with 5.8 i am facing issues like
1. typecastingI would have to see an example.
2.virtual vector<int> getProcedureArgs() { return 0; } -----> Error: Cannot use int to initialize std::vector<int>
The compiler error message is correct. The function returns a vector<int>, but you can't create a vector<int> from an integer 0. That is, the vector template has several constructors, but none that accept a single integer argument.
At this point we have moved away from the original topic. If you have further questions, please start a new thread.

Authorization Issue while Data Preview from HANA View

Hi Experts,
We are using BW on HANA. We have created DSOs (info provider) in BW and generated HANA views from there. We have also created analysis authorizations in BW for authorization relevant characteristics. In HANA, we are able to go to the generated analytic view and preview the data from it successfully.
Now I have created a test user and assigned a custom role with below authorizations to this user in HANA:
- bw2hana/../REPORTING role (this role is automatically created by activation of DSO in BW).
- Roles MODELING, MONITORING, CONTENT_ADMIN, USER.
- Multiple system privileges although not needed, like REPO.EXPORT, REPO.IMPORT, etc.
- Analytic Privilege _SYS_BI_CP_ALL
- Package Privilege: REPO.READ for all required packages (tried with ROOT package also).
In BW system also, the test user has analysis authorizations providing access to the relevant info objects.
But when I am trying to preview data for HANA view, I am getting attached error (also listed below):
"Cannot get the data provider outline
SAP DBTech JDBC: [2048]: Column store error: Search table error: [2950] user is not authorized"
I tried to trace the situation is HANA and got below details in 2 trace files:
indexserver_alert_saphana.trc:
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541187 e CalcEngine       ceAuthorizationCheck.cpp(02365) : AuthorizationCheckHandler::addAPsToSearchObject: Error during converting SqlAPs to Query entries
indexserver_saphana.31003.075.trc
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541197 i TraceContext     TraceContext.cpp(00702) : UserName=TEST_SSO, ApplicationUserName=<<computer name >>, ApplicationName=HDBStudio, ApplicationSource=csns.modeler.datapreview.providers.ResultSetDelegationDataProvider.<init>(ResultSetDelegationDataProvider.java:118);csns.modeler.actions.DataPreviewDelegationAction.getDataProvider(DataPreviewDelegationAction.java:278);csns.modeler.actions.DataPreviewDelegationAction.run(DataPreviewDelegationAction.java:242);csns.modeler.actions.DataPreviewDelegationAction.run(DataPreviewDelegationAction.java:127);csns.modeler.command.handlers.DataPreviewHandler.execute(DataPreviewHandler.java:53);org.eclipse.core.commands
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541187 e CalcEngine       ceAuthorizationCheck.cpp(02365) : AuthorizationCheckHandler::addAPsToSearchObject: Error during converting SqlAPs to Query entries
Do you know what this "Error during converting SqlAPs to Query entries" actually means"? How can we resolve this issue? The authorization is working properly for our user ids. But we need to provide restricted access for business users so trying to create test user and custom role.
Thanks
Nitesh Gupta

Hi Pinaki and Prabhith,
Yes, my issue was resolved. Sorry, missed to updated here.
I was just a beginer for BW on HANA Security at that time and didn't know many small things. The solution was pretty simple.
Whenever you assign analysis authorizations to a user in BW, you also need to generate corresponding HANA authorization. This is done through tcode RS2HANA_CHECK tcode. This tcode converts BW analysis authorizations into HANA analysis authorizations and assign to the HANA user. You can see generated HANA authorization table RS2HANA_AUTH_STR in both BW and HANA.
Once the HANA authorizations are successfully generated for a user, he should be able to see data from Views.
Let me know if this solves issues. Then I will close this thread.
Thanks

Issue while opening websites from module pool subscreen.

I have three subscreens which do open while user clicks a radio button on the main screen . Now in two of the subscreens,there are two text fields which contain url of two websites . When i am setting a GUI status when sy-pfkey/sy-ucomm = 'PICK' , they are getting set but inside the PAI of subscreens when I am writing :-
When sy-ucomm = 'PICK'.
call fn 'call_browser'.
The websites don't open because the PICK fn code is not getting triggered.
In two of the subscreens ,the website addresses / urls will be fixed whereas in the third subscreen,the website address comes from field "tline" .
So I can't handle the scenario through buttons and assigning function codes to them.
Pls advise.

Dear Subankar,
For that screen filed select option like drill down with key.
Regards,
Madhu.

Issues while migrating data from a disk based table to a memory optimized table

Hi All,
I have a Disk based table with 400000000 rows in it, We are trying to convert it into a memory optimized table.
We have already created a memory optimized table with similar structure and trying to import data into this mem optimized table using 'insert into' from the disk table.
I am trying to Migrate around 10000000 rows at a time, but I am getting an error 'There is insufficient system memory in resource pool 'default' to run this query.' Altough we have 128 GB RAM on the server and SS is utilizing more than 120 GB RAM.
Altough the query has been cancelled.
Wanted to Know how could we migrate the table with the available RAM or do we have increase our RAM?
aa

Josh,
Microsoft's documentation on this subject isn't at its best right now (I believe there will be incremental improvements for better understanding), but here is what I read so far.
http://msdn.microsoft.com/en-us/library/dn133190.aspx
"A hash index consists of a collection of buckets organized in an array. A hash function maps
index keys to corresponding buckets in the hash index."
Judging by this statement, a hash index is a hash table just like the ones used as work tables for hash operators in queries (hash matching or grouping). Doesn't contain (or include) other columns, i. e. it doesnt store any data.
"Multiple index keys may be mapped to the same hash bucket."
This means there is some kind of mapping, but this is not explained in the article above. However...
http://msdn.microsoft.com/en-us/library/dn282389.aspx
"For each hash index in the table, each row has an 8-byte address pointer to the next row in the index. Since there are 4 indexes, each row will allocate 32 bytes for index pointers (an 8 byte pointer for each index)."
Each row (in the table) has a pointer (for every index, 1:1 ratio) that points to a row (also known as bucket) in the hash index. So that is how the aforementioned mapping works huh!
> What happens if you include a column in two or three different indexes, or is that not allowed?
My conclusion is that the hash indexes works the same way as a hash worktable, with the addition of the column in the base table that is added to store pointers to the hash index.
When you create a new index, even if you use the same column twice, a hash table is created, hash calculations are distinctly made for each key and stored on it, and while this is done, the column that is exclusively used for this new index is populated
with pointers to this index. You can add a given column to the set of keys of different hash indexes as many times as you want. Correct if i'm wrong, I'm also new on this subject :D

Typical issue while approving workitems from SBWP.

Similar Messages

Maybe you are looking for