Typical MRP Run query

Dear Gurus,
           i am having one strange requirement from client.They want to process in mass.i have given only one example.the same they want for all materials in the plant.
FG consists of two BOMs.Bom1 consists of X(FG 1nos)-Y(SFG 1nos)-Z(ROH 100kg).Bom2 consists of X(FG 1nos)-Y(SFG 1nos)-Z(ROH 10kg).I want to run MRP twice.In First time MRP system should consider BOM1 and Purchase Requistions for Z with quantity of 100kg should generate.System should not generate planned order for X and Y.in second time MRP run,system should consider BOM2 and system should generate planned order for X and Y.System should not generate Purchase requistion for z 10 kg.This is the requirement. How to map this scenario?
Please through some light to map this scenario
Guna

Hi Guna ,
                   You have twice posted the same thread . Please check my reply and let me know whether it was useful .
Check this link :
Re: Typical query-MRP-BOM selection
Neal

Similar Messages

  • Order of delivery schedule line counter at schedule agreements from MRP run

    Currently we are using schedule agreements for our long term external suppliers, but we are facing a problem with the order of new delivery schedule lines created during MRP run.
    Because of master data settings like, lot size, rounding value, plan delivery time and planning time fence to set as firm new requirements, multiple schedule lines are created with no order for schedule line counter.
    Does anyone is aware of a BADI, user exit or customizing control to have this schedule line counter in order?
    Thank you
    Daniel Guillen
    IT
    Skyworks Inc.

    Hi,
    Pls put this query in SD fourms  and get immly help because this is technical fourms.
    Anil

  • MRP Run error " Schedule Lines not generating properly"

    Hi Folks,
    I am facing a typical issue with MRP Run.
    Every time when I am running the MRP for a particular material I have made settings such that Schedule lines to be generated by maintaining the Source list and MRP relevancy as 2 in source list. Also I have fixed the vendor. Now my problem is I am getting Schedule lines for first run and Combination of Purchase requests and Schedule lines or only PRs for the next MRP run.. This is keep on repeating in such as way that the planning is shifting as said above for subsequent MRP Run.
    Note that the initial settings during MD02 remain same for all run.
    I want only schedule lines to be generated but not PR.
    Pls advise and provide input where the wrong might be.
    Quick responce would be appreciated.
    Regards
    Shash

    Dear shash,
    Check with What are the MRP control Parameters values which you are using for the MRP run.
    In MD02, For Deleivery schedules run with value 3 - That's -  Schedule lines.
    The other options are     1  No schedule lines
                                       2  Schedule lines in the opening period.
    check with this & revert back.
    Regards
    Mangalraj.S

  • Sales order link to MRP run

    Dear gurus,
    I have one query regarding sales order link to MRP run.
    I had created sales order by VA01 & also independent requirement in MD61.
    Both are acknowledged in MRP run.I know the requirement in MD61 transferred for MRP run(MD02/MDBT/MD01).
    But my question is how sales order requirement considered in MRP run i.e. link to MRP run.Is there any customization?
    Pl.suggest the same...
    Rg,
    Tushar

    Hi,
    Strategy 11  :-
    Sales Order creation - no impact.
    BSF    Gross planned independent requirements 
    KSL    Sale from stock without independent                                                                               
    Requirement reduction
    Goods Receipt - minus the quantity for the oldest planned independent in demand management. For e.g. if PIR is 100 and delivery 90, PIR becomes 10 (withdrawal 90).
    Delivery - no impact as delivery is issue from sales order.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Project Based MRP run issue

    Hi Friends,
    There is one issue reg. Project Based MRP Run as below :
    We are running MRP through MD51 (Project based MRP run). For this we are assigning FG material code under respective WBS Element which generates Network reservation with movement type 281Q  which is base of MRP run in MD51. After MRP run we get planned order generation and then convert it to Production order and execute Production Order to receive Project Stock after GR.
    After receiving Project stock and then selling it through Post Goods Issue through SD cycle, project stock is consumed but network reservation is not getting closed which results in again generation of planned order if MRP is run again. 
    I need your valuable inputs if we are missing any configuration setting which can set Final issue indicator in reservation while Posting Goods Issue (PGI) in SD because FI indicator checking will only ensure reservation doesnu2019t take part in planning again.
    Your earliest reply will be highly appreaciated.
    Regards,
    Tejas

    Hi Vivek,
    Thanks for your reply. Actually my issue has got resolved the way suggested by Mario Adler.
    Hi Mario,
    Thanks for your solution. PGI through Project is working fine for me.
    Hi Krishna,
    Follow the procedure as suggested by Mario which will resolve your issue.
    Once again thank you all for spending your precious time to respond my query.
    Regards,
    Tejas

  • MRP run performance

    Hi,
    We have upagrded from 4.6c to ECC 6.
    During testing, we find that the MRP Run takes very long time, which is very abnormal.
    Can anybody come up with some reason for this behaviour?
    Here are some inputs.
    Planning run through program - RMMPS000
    Parameters:
    NETCH
    Purchase Req - 2
    Scheduling lines - 3
    Create MRP List - 1
    Planning Mode - 1
    Scheduling - 1
    MRP Process for all the materials - activated
    Parallel processing - activated
    Reg
    Velu

    please refer the following SAP notes
    382037
    204517MRP: Performance problems - typical causes

  • Storage location exclusion from MRP run

    Dear Experts,
    please how do i exclude a particular storage location from being considered in MRP Run? and from which table(s) can I get the list of open production orders

    Dear Vincent,
    in OMIR you can exclude particular storage location. input values as 1
    MRP - 4 view For storage location option input value as 1
    in MMSC - same input value as 1
    For your scond query what exactly you mean be open Prd orders
    You can get all details in COOIS by inputting system status
    Regards
    Madhu

  • MRP Run Error creating Requisitions instead Schedule Lines

    Hi Folks,
    I am facing  a typical issue with MRP Run.
    Every time when I am running the MRP for a particular material I have made settings such that Schedule lines to be generated by maintaining the Source list and MRP relevancy as 2 in source list. Also I have fixed the vendor. Now my problem is I am getting Schedule lines for first run and Combination of Purchase requests and Schedule lines or only PRs for the next MRP run.. This is keep on repeating in such as way that the planning is shifting as said above for subsequent MRP Run.
    Note that the initial settings during MD02 remain same for all run.
    I want only schedule lines to be generated but not PR.
    Pls advise and provide input where the wrong might be.
    Quick responce would be appreciated.
    Regards
    Shash
    Edited by: Shash on Sep 19, 2008 1:10 PM

    Can you please tell me how you solved the problem as i have the same problem .
    Quick response will be a boon.
    Regards
    Raj

  • STO issue in MRP Run

    Dear All Experts,
    I am not from SD module but i have a query related to MRP Run. In our plant we have STO and it uses the 641 movement type. As i know During MRP Run STO is considered in net requirement calculation. It is the standard process. But in one of the plant STO is not being considered in net requirement calculation.
    In MD05 it is showing the requirement but it not increases the requirement. So what could be the possible reason.
    Please answer it. It is very important for me.
    Regards,
    Saurabh

    Dear Experts,
    This is the situation in which 4th line we can see that STO having requirement of 2. But available stock is not reduced by 2.
    And Dear Srinu S in this case delivery is not happened.
    Regards,
    Saurabh

  • MM:We produce a MRP run each week. If auto PO is set up does all of the

    Dear Gurus,
    We produce a MRP run each week. If auto PO is set up does all of the
    pr's allocated to one vendor get adopted into the one PO?
    Please let me Know ASAP
    Regards
    Raj

    Hi,
    Use Tcode-ME59 ,and create single PO w.r.t Mulitple PRs ,if you want to do again advance automatic then make a Job and schedule the same as per your requirement.
    Hope this will resolve your query.
    Thanks & Regards,
    Sandesh Sawant

  • Calender During MRP Run

    Hi all ,
               During the MRP run which calender the sytem will consider to calculate the order , Where we are assigning this planning calender to plant .
    Regards ,
    Ganesh

    >
    ganesh_gk wrote:
    > Hi all ,
    >             Thank you for your replies , I will elaborate my question here ...
    >
    > For the raw material the planned deleivery time is 5 days ,(no relese time , noopening period )
    >
    > My Requirement date is   29/07/2010 (Thursday)
    >
    > when we run MRP when the what is the start date of the PR
    >
    > Whether it is 24/07/2009 (saturday)
    >
    > If i want to consider friday ,sat and sunday as as holidays the start date will become  21/07/2009 (Wednesday) .
    >
    > For this we will crete the holiday calender and facory calender ....
    > 
    > In the work center we assign this facory calender and i hope this calender will be valid for finished materials only ...
    >
    > What is the calander the system will take for raw materials?
    >
    > Where else assign the factory calender to plant / material ?
    >
    > Thank you ,
    >
    > Regards,
    >
    > Ganesh
    Dear Ganesh,
    Still Query is not that clear, But what i understand a bit from your post
    Apart from Factory calendar & holiday calendar
    You need to maintain Planning calendar as per your requirement & assign the same in MRP - 2 view
    Plz check my previous reply & do a test in sandbox
    Regards
    Madhu

  • Effect of manually created proposal on MRP Run

    if there is any proposal which might have been created by the user manually & not via MRP run, does it have effect on the results of MRP.
    will the system ignores the requirement as it has been covered already via manually created proposal.

    Dear Geetika,
    if there is any proposal which might have been created by the user manually & not via MRP run,
    does it have effect on the results of MRP.
    Yes definitely it have effect on MRP
    MRP checks All Firmed Receipts & creates procurement proposals
    will the system ignores the requirement as it has been covered already via manually created proposal.
    Say for example demand is there for material as 50 PCS
    Now manually user created Production order for that 50 pcs
    Now if run MRP than system will not create any plan order as already Production order consists for 50 pcs
    Again we have add demand for the same as for another 50 pcs
    so now total demand became for that material is 100pcs
    Now Run MRP system will create plan order for 50 pcs
    As we have already 50 pcs of production order which is created manually
    Hope the above clarifies
    Regards
    Madhu

  • Purchase order status in MRP run

    Hi Gurus,
    I have a doubt in MRP run.
    While doing the MRP run, can there be any open PO s or is it mandatory to close them.
    Can you also please suggest me on how to run the MRP.

    Hi,
    MRP Run
    Purpose
    The Material Requirements Planning (MRP) function enables you to plan material requirements for complex manufacturing processes. You use the MRP Wizard to create and run MRP scenarios. The MRP Wizard generates recommendations for the production and purchasing orders required to produce the final product on time and in the required quantity. You then use these recommendations to create production and purchase orders in the Order Recommendation Report.
    The order recommendation cannot be issued for requirements that happened in the past (before the present day). Since the purchasing or production process cannot be completed in time, the MRP does not mix the real past data with new recommendations for the same period.
    Prerequisites
    ●     You have defined the
    ○     Planning system
    ○     Procurement method
    ○     Order mutliple
    ○     Minimum order
    ○     Lead time
    See also: Item Master Data, Planning Data Tab.
    ●     You have set the time interval between orders. See also: Define Inventory Cycles.
    ●     You have defined the appropriate items as non-production bills of materials (if required). See  also: Item Master Data, General Tab.
    ●     You have defined default warehouses. See also: Define Warehouses.
    ●     You have defined forecasts. See also: Forecasts.
    ●     You have selected the Consume Forecast option to make the system exclude existing sales orders from the forecast. If this is not selected, the forecast considers existing sales orders as an additional requirement. See also: Sales Order.
    ●     You have set the planning definitions. If you chose Consume Forecast, you have defined the consumption method, days forward and days backward. See also: General Settings, Inventory Tab.
    Process Flow
           1.      Start the MRP Wizard.
           2.      Create a new MRP scenario or select an existing one. (See also: MRP Wizard: Select New or Existing Scenario.)
           3.      Define the parameters for your scenario, such as the planning horizon and item details.
    You also choose your display preferences. (See also: MRP Wizard: Scenario Details.)
           4.      Define the data sources for requirements that you want to include in your MRP scenario.
    For example, you define whether you want to consider the existing stock or the minimum stock level. You can also include a predefined forecast. (See also: MRP Wizard: Data Source.)
           5.      Save the scenario or run it.
    After you run the scenario, the system displays the MRP Results.
    If there are red figures in the result table, solve the problem and re-run the MRP.
           6.      Analyze the MRP results. You can display the final stock quantity before the MRP run or after it.
           7.      Save the recommendations and exit the MRP Wizard.
    Result
    After completing the MRP Wizard, you still need to create the purchase and production orders in accordance with the MRP recommendations. See also: Order Recommendation Report.
    Hope this will help.
    Reward Point if helpful
    Thanks,
    Raja

  • Is there a report to track the exception messages after a MRP run ?

    We have a scenario at our client site where MRP run is not optimized to the fullest.
    The planners are not trained on how to interpret those exception messages.
    They are not trained on how to reschedule / expedite planned orders resulting from an MRP run.
    Is there a report out in SAP that keeps track of
    1) History of number of exception messages by type ( Expedite/Reschedule/Cancel)
    2) History of number of exception messages that were acted on or ignored by the planner.
    This is to create metrics on the usage of MRP exception reports by planners.
    Appreciate your inputs..

    Hi
    The exception messages are dynamic and time dependant. You cannot have history of exception message.. If your user is feeling difficult to use standard MRP reports. Create a new report using a function module MD_STOCK_REQUIREMENTS_LIST_API
    It gives all MRP data including exception messages.
    Regards
    Antony

  • When MRP run through background process in MDBT open PR and PO not comming?

    Hi,
    When MRP run through backgroung process in MDBT open PR and PO not coming in MDBT result.
    Pls advise accordingaly.
    Regards
    rk

    Ram,
    Either I am totally misunderstanding your statements, or your business people are misinformed.  
    The output of MD01 (MRP total run in foreground) and the output of MDBT (MRP total Run in Background) ARE IDENTICAL, provided you have selected the same parameters.  
    Neither output contains a discrete listing of open Purchase orders and Purchase requisitions.
    Standard output of both MD01 and MDBT are:
    1.  List of materials processed, with exception messages
    2.  Statistics
    In addition, both of these programs also write MRP records to the MRP databases, provided that the "Display Material List" parameter is set.  In this case, both of these programs will produce data that can be further reviewed and managed in MD05 and MD06. MD06 is the tool that most planners use to process the MRP database info.
    If you wish to see a listing of the entire MRP results (either MD01 or MDBT), then execute transaction MDLD.  This will produce either a spoolfile or a printed document.
    For the PO or PR listings, review my earlier suggestions.
    Rgds,
    DB49

Maybe you are looking for