Typical requirement - Help needed!!
Dear all,
I have the below requirement. I have 2 keyfigures.
1. Allocated Qty (from APO)
2. Order Qty (From ECC)
I have Allocated Qty in Cube1 and Order Qty in Cube2.
I have built a multiprovider on Cube1 and Cube 2 and my report looks like this.
PLANT*********SHIPTO**********CALMONTH**********ALLOCQTY**********ORDERQTY**********REMAININGQTY
2222***********83747338**********09/2009*************2000******************1000******************1000***********
Remaining Qty = AllocQty - Order Qty
However, I have Sales Document in Cube2. When I drill down Sales Order into the report my report looks like this since I dont have Sales Order in Cube1.
PLANT*********SHIPTO**********CALMONTH***SALESORD*****ALLOCQTY**********ORDERQTY**********REMAININGQTY
2222***********83747338**********09/2009********509388********000000******************1000******************-1000*******
2222***********83747338**********09/2009***********#*************2000******************1000**********************1000*******
But my requirement is even if I pull the Sales Order the report should showthe allocqty like below
PLANT*********SHIPTO**********CALMONTH***SALESORD*****ALLOCQTY**********ORDERQTY**********REMAININGQTY
2222***********83747338**********09/2009********509388********2000******************1000***********************1000*******
Can any one help me how I can achieve this. Is this possible in BEx. I dont want to go with the change to Database option if this can be done in the Query. I have used the Constant selection feature but it adds up all the values.
Any one has a solution to this? If not possible in BEx what is the best way to do it in the backend at the cube level. This is simple example I have put here but my cubes are much more complex than what I have given here.
Any solution would be highly appreciated.
Hi KK
The only way you can address this, as I know it, is constant selection which you seem to have done already.
The other solution is to include Sales document in your second cube. This of course means design changes as well as data load. What are the fields that you have in the second cube.
Will you be able to look up Document number from another target or load from the source of your cube? These are the things that you need to consider before starting the changes.
Regards,
Similar Messages
-
KM&C Requirement - Help Needed
Hi
I have installed portal with KM. My requirement is i need to create a folder under Content Administration --> KM Content. I name it as Test Folder.
I need to assign some list of properties ( for example property1,property2,property3...).to the above folder and i want to search for documents based on these properties.
I have installed TREX.
Is it possible to assign properties to the KM Content --> Test Folder.? Whr r u?
Can I search the above uploaded document through search?
Thanks
RaviHi,
You can create your own custom properties:
https://forums.sdn.sap.com/thread.jspa?threadID=115589
https://forums.sdn.sap.com/thread.jspa?threadID=48500
http://help.sap.com/saphelp_nw70/helpdata/EN/1a/9a4a3b80f2ec40aa7456bc87a94259/frameset.htm
So for your custom properties you should define Folder Validity Patterns, so that the property is valid for the specified folder and all subfolders.
To search your custom properties, you should extend the Search Options set of your standard search:
http://help.sap.com/saphelp_nw70/helpdata/EN/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm
https://forums.sdn.sap.com/thread.jspa?threadID=152201
Add your properties to Additional Search Properties property.
Regards,
Praveen Gudapati -
CS4 technical requirements, help needed
I am a complete novice when it comes to stuff like this, so I apologise in advance if the question I'm about to ask may seem a bit stupid.
I saw the following technical requirements for Adobe CS4: 2GHz or faster processor for DV; 3.4GHz for HDV; dual 2.8GHz for HD
Do I need a dual core processor with at least 3.4 ghz to be able to edit HDV, or will a dual 2.8 Ghz meet all of those requirements? Essentially I am wondering if those technical requirements are in ascending order, or just specific to different tasks. Is it a matter of "the more cores the better", or do they have to have at least 3.4 GHz to be able to do the job?
There are 2 laptops I am looking at, at the moment.
Sony FW51ZF
Intel Core 2 Duo processor T9600
(2.80Ghz, 1066Mhz, 6MB Cache)
ADVENT 8555 GX
Intel Quad-Core processor Q9000
(2Ghz, 1066Mhz, 6MB Cache)
Would these suit the requirements and if so, which one would be better?
I would greatly appreciate your responses.
KonradMost of which are erroneous guesses.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Ian Edwards" <[email protected]>
wrote in message
news:ggb7c1$qtg$[email protected]..
> Hi
>
> it would he if you uploaded the code so we can see it.
If you do that then
> no doubt you will be deluged with solutions.
> cheers
>
> Ian
> "martcol" <[email protected]> wrote in
message
> news:ggavg8$gf7$[email protected]..
>>
quote:
Originally posted by:
[email protected]
>> ....when I place other divs on top, they wont stay
where I put them. I
>> have
>> taken absolute positioning off, but then they fly
off position
>> totally.
>>
>> Do the< div> tags sit under each other rather
than if it is what you
>> want, sit
>> side-by-side? Or do they actually, "fly off
position?" Have you thought
>> about
>> the "float" property?
>>
>> Sometimes, leaving off a single closing tag in my
code can have
>> catastrophic
>> results for positioning - have you checked if your
HTML validates.
>> Often, that
>> can be a useful way of checking if your code is the
problem.
>>
>> Martin
>>
> -
PI sheet new requirement, help needed.
There is a requirement from the user to add 2 new machines onto PI sheet.
Can anyone tell me is this possible? How to do this?> this button should send the PDF form to a pre-defined e-mail address in the BACKGROUND
This would not only be a HUGE security hole if this were allowed (you can have any PDF form out there e-mailing any information it wants to any address without you even knowing it) but it would also require Acrobat to handle SMTP transfers to a mail sever.
The solution of allowing the OS-defined default mail client to handle this solves both problems. Aandi's option is what you would have to do - submit the data via webservice and have your remote server e-mail out the data. -
Help Needed !!!!! in New Hire Proration and Carryover (PTO Accruals)
Dear All,
We are facing a problem in Accrual formula where
Accrual Term is 1-July to 30 June
Accruing Multiplier is 'M'
Accruing Frequency is 3 Months
Accrual Rate is 5 Days
Employee gets Leave at the end of each quarter
1st Quarter (July-Aug-Sep) - 5 Days
2nd Quarter (Oct - Nov - Dec) - 5 Days
3rd Quarter (Jan - Feb - Mar) - 5 Days
4Th Quarter (Apr - May - Jun) - 6 Days
Total 5+5+5+6 = 21 Days
This accrual Plan is working fine for employees joining before the accrual start date of 1-Jul or employees joining on the first date of the first month of any quarter.
But for any employee joining after 1-Jul we should get the prorated leave entitlement
We have identified and developed the logic for the number of days a new joinee would accrue if he joins in the middle of a Accrual period. I am detailing out the following logic
The SQL for this is as follows
SELECT (ROUND((21/365*(fffunc.days_between(:Hire_date,:Current_accrual_Period_End_Date)+1))/5,1)*5)*-1 FROM DUAL
My query to all Fastformula Gurus is that how can i incorporate this leave proration logic for employees joining in the middle of the accrual period into my Accrual Fastformula.
Any help is appreciated guys.
If anyone wants to look at the code for the Accrual fastformula, you guys can Message me on the forum
Cheers
SachinTo achieve your requirement, you need to change the accrual sub formula PTO_PAYROLL_PERIOD_ACCRUAL. Follow the below steps.
A.Create a pl/sql function :
1. Create a new Pl/Sql Function in similar lines with parameters as p_assignment_id, p_date_earned, p_plan_id and p_number_of_years;
2. The new function should call the pl/sql function per_utility_functions.Get_Accrual_Band passing values of p_plan_id and p_number_of_years.
3. After the above function call, invoke your custom procedure to get the accrual value based on grade (passing p_assignment_id and p_date_earned as parameters).
4. call the procedure per_formula_functions.set_number to set the ceiling value.
So overall your function should like this
FUNCTION <function name>(p_assignment_id NUMBER,p_date_earned DATE,p_plan_id NUMBER, p_number_of_years NUMBER ) RETURN NUMBER IS
< variables declaration>
l_ceiling number;
BEGIN
l_return := per_utility_functions.Get_Accrual_Band(p_plan_id,p_number_of_years);
IF l_return = 1 THEN
return l_return;
ELSE
l_return := <your custom function>(p_assignment_id,p_date_earned,l_ceiling);
l_error := per_formula_functions.set_number('CEILING' ,l_ceiling);
END IF;
END <function name>;
l_error := per_formula_functions.set_number('CEILING' ,l_ceiling);
B. Create a Formula Function with the above pl/sql function with p_assignment_id, p_date_earned, p_plan_id as context usages and p_number_of_years as parameter.
C. Copy the Formula PTO_PAYROLL_PERIOD_ACCRUAL and replace the entry of Get_Accrual_Band with your custom formula function defined in step B.
D. Copy the formula PTO_PAYROLL_BALANCE_CALCULATION and replace the entry of PTO_PAYROLL_PERIOD_ACCRUAL with your custom formula defined in step C.
Hope this helps.
Regards,
Sharath -
Hi All,
I am new to oracle.I have a requirement. i need to display sales fields for a particular time as below.
Time Sales
6-7 3333
7-8 45345
8-9 546
But the min time and max time are coming from different query and sales fields coming from different.Now i need to join both queries to get the results.But there is no common column.I tried with sub query there also i am getting error.Please find the queries and help me
Hour Group Query:
select
time1.*,
(select if (time_format(dt.curr_time, '%H') <
time_format(ifnull((SELECT prop_value FROM cust_conv_properties c where prop_key = 'DayStartingTime'), '00:00:00'), '%H'),
date_format(date_add(dt.curr_time, INTERVAL 0 DAY),'%d/%m/%Y'),
date_format(dt.curr_time,'%d/%m/%Y')) as curr_date
from
(select concat(date_format(str_to_date('23/10/2011','%d/%m/%Y'),'%Y-%m-%d'), ' ', '00:00:00') as curr_time) dt) as report_date
from
(select
-- 'S' temp,
cast(min(cchg.from_hour) as unsigned) as min_value,
cast(max(cchg.to_hour) as unsigned) as max_value,
concat(concat(min(cchg.from_hour),''),'-',concat(max(cchg.to_hour),'')) as time_diff
from
cust_conv_hour_group as cchg
where
cchg.group_value in (SELECT distinct if(group_value = (SELECT min(group_value) FROM cust_conv_hour_group),
(SELECT max(group_value) FROM cust_conv_hour_group), group_value-1) as group_value
FROM cust_conv_hour_group c where from_hour <= cast(time_format('23:00:00','%H') as unsigned)
and
to_hour > cast(time_format('00:00:00','%H') as unsigned))
group by
cchg.group_value
) time1
Sales Fields Query:
SELECT
if(count(cons.wr_tarSale)=0,0, cons.wr_tarSale) wr_tarSale,
if(count(cons.wr_actSale)=0,0, cons.wr_actSale) wr_actSale,
if(count(cons.wr_tarTrans)=0,0, cons.wr_tarTrans) wr_tarTrans,
if(count(cons.wr_actTrans)=0,0, cons.wr_actTrans) wr_actTrans,
if(count(cons.tarSale)=0,0, cons.tarSale) tarSale,
if(count(cons.actSale)=0,0, cons.actSale) actSale,
if(count(cons.varSale)=0,0, cons.varSale) varSale,
if(count(cons.tarTrans)=0,0, cons.tarTrans) tarTrans,
if(count(cons.actTrans)=0,0, cons.actTrans) actTrans,
if(count(cons.actAds)=0,0, cons.actAds) actAds,
if(count(cons.actUpt)=0,0, cons.actUpt) actUpt,
if(count(cons.tarAds)=0,0, cons.tarAds) tarAds,
if(count(cons.tarUpt)=0,0, cons.tarUpt) tarUpt,
if(count(cons.actConv)=0,0, cons.actConv) actConv,
if(count(cons.tarTplh)=0,0, cons.tarTplh) tarTplh,
if(count(cons.actBlank1)=0,0, cons.actBlank1) actBlank1,
if(count(cons.actBlank2)=0,0, cons.actBlank2) actBlank2,
if(count(cons.actTplh)=0,0, cons.actTplh) actTplh,
if(count(cons.sDTarSale)=0,0, cons.sDTarSale)sDTarSale,
if(count(cons.sDTarTrans)=0,0, cons.sDTarTrans)sDTarTrans,
if(count(cons.sDTarQty)=0,0, cons.sDTarQty)sDTarQty,
if(count(cons.sDTarFF)=0,0, cons.sDTarFF)sDTarFF
FROM
SELECT
ifnull(sum(ccsr.target_sale),0) wr_tarSale,
ifnull(sum(ccsr.actual_sale),0) wr_actSale,
ifnull(sum(ccsr.actual_transaction_count),0) wr_actTrans,
ifnull(sum(ccsr.target_transaction_count),0) wr_tarTrans,
round(ifnull(sum(ccsr.target_sale),0),2) tarSale,
round(ifnull(sum(ccsr.actual_sale),0),2) actSale,
round(round(ifnull(sum(ccsr.actual_sale),0),2)- round(ifnull(sum(ccsr.target_sale),0),2),2) varSale,
round(ifnull(sum(ccsr.actual_transaction_count),0),0) actTrans,
round(ifnull(sum(ccsr.target_transaction_count),0),0) tarTrans,
0 actBlank1,
round(ifnull((sum(ccsr.actual_sale)/sum(ccsr.actual_transaction_count)),0),2) actAds,
round(ifnull((sum(ccsr.target_sale)/sum(ccsr.target_transaction_count)),0),2) tarAds,
round(ifnull((sum(ccsr.actual_quantity)/sum(ccsr.actual_transaction_count)),0),2) actUpt,
round(ifnull((sum(ccsr.target_quantity)/sum(ccsr.target_transaction_count)),0),2) tarUpt,
round(ifnull((sum(ccsr.actual_transaction_count)/sum(ccsr.actual_footfalls))*100,0),2) actConv,
0 actBlank2,
0 actBlank3,
round(ifnull((sum(ccsr.actual_footfalls)/sum(ccsr.actual_man_hours)),0),2) actTplh,
round(ifnull((sum(ccsr.target_footfalls)/sum(ccsr.target_man_hours)),0),2) tarTplh,
round(ifnull(ccsrs.target_sale,0),2) as sDTarSale,
round(ifnull(ccsrs.target_transaction_count,0),0) as sDTarTrans,
ifnull(ccsrs.target_quantity,0) as sDTarQty,
ifnull(ccsrs.target_footfalls,0) as sDTarFF
FROM
cust_conv_store_report ccsr
inner join cust_conv_store_report_summary ccsrs on(ccsrs.brand_code=ccsr.brand_code and ccsrs.category=ccsr.category and
ccsrs.store_date=ccsr.store_date and ccsrs.value_type=ccsr.value_type)
WHERE
ccsr.value_type='B' and
ccsr.brand_code= ? AND
ccsr.store_date = date_format(str_to_date(?,'%d/%m/%Y'),'%Y-%m-%d')
AND HOUR((TIME(ccsr.transaction_time))) >= (?) AND HOUR((TIME(ccsr.transaction_time)))< (?)
GROUP BY
ccsr.brand_code
) cons;
Edited by: 992887 on Mar 10, 2013 4:25 AM992887 wrote:
Hi All,
I am new to oracle.code below is NOT valid Oracle syntax.
post results from valid Oracle SQL below
SELECT * FROM V$VERSION;
I have a requirement. i need to display sales fields for a particular time as below.
Time Sales
6-7 3333
7-8 45345
8-9 546
But the min time and max time are coming from different query and sales fields coming from different.Now i need to join both queries to get the results.But there is no common column.I tried with sub query there also i am getting error.Please find the queries and help me
Hour Group Query:
select
time1.*,
(select if (time_format(dt.curr_time, '%H') <
time_format(ifnull((SELECT prop_value FROM cust_conv_properties c where prop_key = 'DayStartingTime'), '00:00:00'), '%H'),
date_format(date_add(dt.curr_time, INTERVAL 0 DAY),'%d/%m/%Y'),
date_format(dt.curr_time,'%d/%m/%Y')) as curr_date
from
(select concat(date_format(str_to_date('23/10/2011','%d/%m/%Y'),'%Y-%m-%d'), ' ', '00:00:00') as curr_time) dt) as report_date
from
(select
-- 'S' temp,
cast(min(cchg.from_hour) as unsigned) as min_value,
cast(max(cchg.to_hour) as unsigned) as max_value,
concat(concat(min(cchg.from_hour),''),'-',concat(max(cchg.to_hour),'')) as time_diff
from
cust_conv_hour_group as cchg
where
cchg.group_value in (SELECT distinct if(group_value = (SELECT min(group_value) FROM cust_conv_hour_group),
(SELECT max(group_value) FROM cust_conv_hour_group), group_value-1) as group_value
FROM cust_conv_hour_group c where from_hour <= cast(time_format('23:00:00','%H') as unsigned)
and
to_hour > cast(time_format('00:00:00','%H') as unsigned))
group by
cchg.group_value
) time1
Sales Fields Query:
SELECT
if(count(cons.wr_tarSale)=0,0, cons.wr_tarSale) wr_tarSale,
if(count(cons.wr_actSale)=0,0, cons.wr_actSale) wr_actSale,
if(count(cons.wr_tarTrans)=0,0, cons.wr_tarTrans) wr_tarTrans,
if(count(cons.wr_actTrans)=0,0, cons.wr_actTrans) wr_actTrans,
if(count(cons.tarSale)=0,0, cons.tarSale) tarSale,
if(count(cons.actSale)=0,0, cons.actSale) actSale,
if(count(cons.varSale)=0,0, cons.varSale) varSale,
if(count(cons.tarTrans)=0,0, cons.tarTrans) tarTrans,
if(count(cons.actTrans)=0,0, cons.actTrans) actTrans,
if(count(cons.actAds)=0,0, cons.actAds) actAds,
if(count(cons.actUpt)=0,0, cons.actUpt) actUpt,
if(count(cons.tarAds)=0,0, cons.tarAds) tarAds,
if(count(cons.tarUpt)=0,0, cons.tarUpt) tarUpt,
if(count(cons.actConv)=0,0, cons.actConv) actConv,
if(count(cons.tarTplh)=0,0, cons.tarTplh) tarTplh,
if(count(cons.actBlank1)=0,0, cons.actBlank1) actBlank1,
if(count(cons.actBlank2)=0,0, cons.actBlank2) actBlank2,
if(count(cons.actTplh)=0,0, cons.actTplh) actTplh,
if(count(cons.sDTarSale)=0,0, cons.sDTarSale)sDTarSale,
if(count(cons.sDTarTrans)=0,0, cons.sDTarTrans)sDTarTrans,
if(count(cons.sDTarQty)=0,0, cons.sDTarQty)sDTarQty,
if(count(cons.sDTarFF)=0,0, cons.sDTarFF)sDTarFF
FROM
SELECT
ifnull(sum(ccsr.target_sale),0) wr_tarSale,
ifnull(sum(ccsr.actual_sale),0) wr_actSale,
ifnull(sum(ccsr.actual_transaction_count),0) wr_actTrans,
ifnull(sum(ccsr.target_transaction_count),0) wr_tarTrans,
round(ifnull(sum(ccsr.target_sale),0),2) tarSale,
round(ifnull(sum(ccsr.actual_sale),0),2) actSale,
round(round(ifnull(sum(ccsr.actual_sale),0),2)- round(ifnull(sum(ccsr.target_sale),0),2),2) varSale,
round(ifnull(sum(ccsr.actual_transaction_count),0),0) actTrans,
round(ifnull(sum(ccsr.target_transaction_count),0),0) tarTrans,
0 actBlank1,
round(ifnull((sum(ccsr.actual_sale)/sum(ccsr.actual_transaction_count)),0),2) actAds,
round(ifnull((sum(ccsr.target_sale)/sum(ccsr.target_transaction_count)),0),2) tarAds,
round(ifnull((sum(ccsr.actual_quantity)/sum(ccsr.actual_transaction_count)),0),2) actUpt,
round(ifnull((sum(ccsr.target_quantity)/sum(ccsr.target_transaction_count)),0),2) tarUpt,
round(ifnull((sum(ccsr.actual_transaction_count)/sum(ccsr.actual_footfalls))*100,0),2) actConv,
0 actBlank2,
0 actBlank3,
round(ifnull((sum(ccsr.actual_footfalls)/sum(ccsr.actual_man_hours)),0),2) actTplh,
round(ifnull((sum(ccsr.target_footfalls)/sum(ccsr.target_man_hours)),0),2) tarTplh,
round(ifnull(ccsrs.target_sale,0),2) as sDTarSale,
round(ifnull(ccsrs.target_transaction_count,0),0) as sDTarTrans,
ifnull(ccsrs.target_quantity,0) as sDTarQty,
ifnull(ccsrs.target_footfalls,0) as sDTarFF
FROM
cust_conv_store_report ccsr
inner join cust_conv_store_report_summary ccsrs on(ccsrs.brand_code=ccsr.brand_code and ccsrs.category=ccsr.category and
ccsrs.store_date=ccsr.store_date and ccsrs.value_type=ccsr.value_type)
WHERE
ccsr.value_type='B' and
ccsr.brand_code= ? AND
ccsr.store_date = date_format(str_to_date(?,'%d/%m/%Y'),'%Y-%m-%d')
AND HOUR((TIME(ccsr.transaction_time))) >= (?) AND HOUR((TIME(ccsr.transaction_time)))< (?)
GROUP BY
ccsr.brand_code
) cons;
Edited by: 992887 on Mar 10, 2013 4:25 AM -
HELP NEEDED WITH ADDAPTER-DVI TO VGA.
PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me. -
Help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
How to handle method on_costing_component_to_outtab which belongs to badi gui_itemization_ck. This is to revaluate CCR in CJ20N.
From sale transaction(va01/va02) i need to call cj20n/cj9ecp for revaluating cost estimates. Can anyone say how to proceed with this thing.
Can any one say how to handle pop up window in CJ20N/CJ9ECP when clicked edit ecp button. Later how to revaluate cost estimates. For this should i need to go for call transaction or is there any method available. If so how to handle method for revaluating cost estimates for ECP of WBS elementsThanks Amol for the advice.
My friend doesn't belong to an engineering background and had not worked in a manufacturing environment.
He holds an MBA degree specialised in systems and has worked in software companies supporting software projects and the functions(like HR,Procurement in the same setup) as a software quality guy.
Moreover the modules mentioned by you requires engineering background with manufacturing exposure.
He had enquired for the course at siemens and they said that he may not be suitable for any of the modules offered by them as per the above reasons.They also mentioned that they have to check with SAP Labs for expert opinion.
Please provide your inputs.
regards,
Zubair. -
Help needed to optimize the query
Help needed to optimize the query:
The requirement is to select the record with max eff_date from HIST_TBL and that max eff_date should be > = '01-Jan-2007'.
This is having high cost and taking around 15mins to execute.
Can anyone help to fine-tune this??
SELECT c.H_SEC,
c.S_PAID,
c.H_PAID,
table_c.EFF_DATE
FROM MTCH_TBL c
LEFT OUTER JOIN
(SELECT b.SEC_ALIAS,
b.EFF_DATE,
b.INSTANCE
FROM HIST_TBL b
WHERE b.EFF_DATE =
(SELECT MAX (b2.EFF_DATE)
FROM HIST_TBL b2
WHERE b.SEC_ALIAS = b2.SEC_ALIAS
AND b.INSTANCE =
b2.INSTANCE
AND b2.EFF_DATE >= '01-Jan-2007')
OR b.EFF_DATE IS NULL) table_c
ON table_c.SEC_ALIAS=c.H_SEC
AND table_c.INSTANCE = 100;To start with, I would avoid scanning HIST_TBL twice.
Try this
select c.h_sec
, c.s_paid
, c.h_paid
, table_c.eff_date
from mtch_tbl c
left
join (
select sec_alias
, eff_date
, instance
from (
select sec_alias
, eff_date
, instance
, max(eff_date) over(partition by sec_alias, instance) max_eff_date
from hist_tbl b
where eff_date >= to_date('01-jan-2007', 'dd-mon-yyyy')
or eff_date is null
where eff_date = max_eff_date
or eff_date is null
) table_c
on table_c.sec_alias = c.h_sec
and table_c.instance = 100; -
Help needed for using BASIC authentication through JDBCRealm
Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
<Realm
className="org.apache.catalina.realm.JDBCRealm"
driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
connectionName="username" connectionPassword="password"
digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
userRoleTable="user_roles" roleNameCol="rolename"
/>
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
---------------------------------------------------------------- -
Urgent help needed on deployment facts
Hi
I had completed a Java Web based application using JApplet, which in turn uses Java Media Framework and Java Communications APIs. So when i deploy this application and let the clients use this application. I need to dump some jar files and properties files into the clients JRE so that all the APIs will work properly. Without any installations. I tried doing this manually by copying these files into client machines So is there a direct method for performing the task. Or i need to add some additional code to my applet so as to find the clients current JRE version and place the required files under using FTP? Can i write a setup routine or something which does all these operations once the client access the applet?
Help needed in the above issues
Thanks in advance
SwarajWhat you will want to do is look into JNLP and Java WebStart. They allow you to write a setup for your product that makes installation as easy as InstallShield™ does for the Windows™ platform (ie: it allows customers who cannot tell Java from Perl to install your product).
-
Help needed:Printing HTML file using javax.print
Hi
I am using the following code which i got form the forum for rpinting an HTML file.
The folllowing code is working fine, but the problem is the content of HTML file is not getting printed. I am geeting a blank page with no content. What is the change that is required in the code? ALso is there any simpler way to implement this. Help needed ASAP.
public boolean printHTMLFile(String filename) {
try {
JEditorPane editorPane = new JEditorPane();
editorPane.setEditorKit(new HTMLEditorKit());
//editorPane.setContentType("text/html");
editorPane.setSize(500,500);
String text = getFileContents(filename);
if (text != null) {
editorPane.setText(text);
} else {
return false;
printEditorPane(editorPane);
return true;
} catch (Exception tce) {
tce.printStackTrace();
return false;
public String getFileContents(String filename) {
try {
File file = new File(filename);
BufferedReader br = new BufferedReader(new FileReader(file));
String line;
StringBuffer sb = new StringBuffer();
while ((line = br.readLine()) != null) {
sb.append(line);
br.close();
return sb.toString();
} catch (Exception tce) {
tce.printStackTrace();
return null;
public void printEditorPane(JEditorPane editorPane) {
try {
HTMLPrinter htmlPrinter = new HTMLPrinter();
htmlPrinter.printJEditorPane(editorPane, htmlPrinter.showPrintDialog());
} catch (Exception tce) {
tce.printStackTrace();
* Sets up to easily print HTML documents. It is not necessary to call any of the setter
* methods as they all have default values, they are provided should you wish to change
* any of the default values.
public class HTMLPrinter {
public int DEFAULT_DPI = 72;
public float DEFAULT_PAGE_WIDTH_INCH = 8.5f;
public float DEFAULT_PAGE_HEIGHT_INCH = 11f;
int x = 100;
int y = 80;
GraphicsConfiguration gc;
PrintService[] services;
PrintService defaultService;
DocFlavor flavor;
PrintRequestAttributeSet attributes;
Vector pjlListeners = new Vector();
Vector pjalListeners = new Vector();
Vector psalListeners = new Vector();
public HTMLPrinter() {
gc = null;
attributes = new HashPrintRequestAttributeSet();
flavor = null;
defaultService = PrintServiceLookup.lookupDefaultPrintService();
services = PrintServiceLookup.lookupPrintServices(flavor, attributes);
// do something with the supported docflavors
DocFlavor[] df = defaultService.getSupportedDocFlavors();
for (int i = 0; i < df.length; i++)
System.out.println(df.getMimeType() + " " + df[i].getRepresentationClassName());
// if there is a default service, but no other services
if (defaultService != null && (services == null || services.length == 0)) {
services = new PrintService[1];
services[0] = defaultService;
* Set the GraphicsConfiguration to display the print dialog on.
* @param gc a GraphicsConfiguration object
public void setGraphicsConfiguration(GraphicsConfiguration gc) {
this.gc = gc;
public void setServices(PrintService[] services) {
this.services = services;
public void setDefaultService(PrintService service) {
this.defaultService = service;
public void setDocFlavor(DocFlavor flavor) {
this.flavor = flavor;
public void setPrintRequestAttributes(PrintRequestAttributeSet attributes) {
this.attributes = attributes;
public void setPrintDialogLocation(int x, int y) {
this.x = x;
this.y = y;
public void addPrintJobListener(PrintJobListener pjl) {
pjlListeners.addElement(pjl);
public void removePrintJobListener(PrintJobListener pjl) {
pjlListeners.removeElement(pjl);
public void addPrintServiceAttributeListener(PrintServiceAttributeListener psal) {
psalListeners.addElement(psal);
public void removePrintServiceAttributeListener(PrintServiceAttributeListener psal) {
psalListeners.removeElement(psal);
public boolean printJEditorPane(JEditorPane jep, PrintService ps) {
if (ps == null || jep == null) {
System.out.println("printJEditorPane: jep or ps is NULL, aborting...");
return false;
// get the root view of the preview pane
View rv = jep.getUI().getRootView(jep);
// get the size of the view (hopefully the total size of the page to be printed
int x = (int) rv.getPreferredSpan(View.X_AXIS);
int y = (int) rv.getPreferredSpan(View.Y_AXIS);
// find out if the print has been set to colour mode
DocPrintJob dpj = ps.createPrintJob();
PrintJobAttributeSet pjas = dpj.getAttributes();
// get the DPI and printable area of the page. use default values if not available
// use this to get the maximum number of pixels on the vertical axis
PrinterResolution pr = (PrinterResolution) pjas.get(PrinterResolution.class);
int dpi;
float pageX, pageY;
if (pr != null)
dpi = pr.getFeedResolution(PrinterResolution.DPI);
else
dpi = DEFAULT_DPI;
MediaPrintableArea mpa = (MediaPrintableArea) pjas.get(MediaPrintableArea.class);
if (mpa != null) {
pageX = mpa.getX(MediaPrintableArea.INCH);
pageY = mpa.getX(MediaPrintableArea.INCH);
} else {
pageX = DEFAULT_PAGE_WIDTH_INCH;
pageY = DEFAULT_PAGE_HEIGHT_INCH;
int pixelsPerPageY = (int) (dpi * pageY);
int pixelsPerPageX = (int) (dpi * pageX);
int minY = Math.max(pixelsPerPageY, y);
// make colour true if the user has selected colour, and the PrintService can support colour
boolean colour = pjas.containsValue(Chromaticity.COLOR);
colour = colour & (ps.getAttribute(ColorSupported.class) == ColorSupported.SUPPORTED);
// create a BufferedImage to draw on
int imgMode;
if (colour)
imgMode = BufferedImage.TYPE_3BYTE_BGR;
else
imgMode = BufferedImage.TYPE_BYTE_GRAY;
BufferedImage img = new BufferedImage(pixelsPerPageX, minY, imgMode);
Graphics myGraphics = img.getGraphics();
myGraphics.setClip(0, 0, pixelsPerPageX, minY);
myGraphics.setColor(Color.WHITE);
myGraphics.fillRect(0, 0, pixelsPerPageX, minY);
java.awt.Rectangle rectangle=new java.awt.Rectangle(0,0,pixelsPerPageX, minY);
// call rootView.paint( myGraphics, rect ) to paint the whole image on myGraphics
rv.paint(myGraphics, rectangle);
try {
// write the image as a JPEG to the ByteArray so it can be printed
Iterator writers = ImageIO.getImageWritersByFormatName("jpeg");
ImageWriter writer = (ImageWriter) writers.next();
// mod: Added the iwparam to create the highest quality image possible
ImageWriteParam iwparam = writer.getDefaultWriteParam();
iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT) ;
iwparam.setCompressionQuality(1.0f); // highest quality
ByteArrayOutputStream out = new ByteArrayOutputStream();
ImageOutputStream ios = ImageIO.createImageOutputStream(out);
writer.setOutput(ios);
// get the number of pages we need to print this image
int imageHeight = img.getHeight();
int numberOfPages = (int) Math.ceil(minY / (double) pixelsPerPageY);
// print each page
for (int i = 0; i < numberOfPages; i++) {
int startY = i * pixelsPerPageY;
// get a subimage which is exactly the size of one page
BufferedImage subImg = img.getSubimage(0, startY, pixelsPerPageX, Math.min(y - startY, pixelsPerPageY));
// mod: different .write() method to use the iwparam parameter with highest quality compression
writer.write(null, new IIOImage(subImg, null, null), iwparam);
SimpleDoc sd = new SimpleDoc(out.toByteArray(), DocFlavor.BYTE_ARRAY.JPEG, null);
printDocument(sd, ps);
// reset the ByteArray so we can start the next page
out.reset();
} catch (PrintException e) {
System.out.println("Error printing document.");
e.printStackTrace();
return false;
} catch (IOException e) {
System.out.println("Error creating ImageOutputStream or writing to it.");
e.printStackTrace();
return false;
// uncomment this code and comment out the 'try-catch' block above
// to print to a JFrame instead of to the printer
/* JFrame jf = new JFrame();
PaintableJPanel jp = new PaintableJPanel();
jp.setImage( img );
JScrollPane jsp = new JScrollPane( jp );
jf.getContentPane().add( jsp );
Insets i = jf.getInsets();
jf.setBounds( 0, 0, newX, y );
jf.setDefaultCloseOperation( JFrame.DISPOSE_ON_CLOSE );
jf.setVisible( true );*/
return true;
* Print the document to the specified PrintService.
* This method cannot tell if the printing was successful. You must register
* a PrintJobListener
* @return false if no PrintService is selected in the dialog, true otherwise
public boolean printDocument(Doc doc, PrintService ps) throws PrintException {
if (ps == null)
return false;
addAllPrintServiceAttributeListeners(ps);
DocPrintJob dpj = ps.createPrintJob();
addAllPrintJobListeners(dpj);
dpj.print(doc, attributes);
return true;
public PrintService showPrintDialog() {
return ServiceUI.printDialog(gc, x, y, services, defaultService, flavor, attributes);
private void addAllPrintServiceAttributeListeners(PrintService ps) {
// add all listeners that are currently added to this object
for (int i = 0; i < psalListeners.size(); i++) {
PrintServiceAttributeListener p = (PrintServiceAttributeListener) psalListeners.get(i);
ps.addPrintServiceAttributeListener(p);
private void addAllPrintJobListeners(DocPrintJob dpj) {
// add all listeners that are currently added to this object
for (int i = 0; i < pjlListeners.size(); i++) {
PrintJobListener p = (PrintJobListener) pjlListeners.get(i);
dpj.addPrintJobListener(p);
// uncomment this also to print to a JFrame instead of a printer
/* protected class PaintableJPanel extends JPanel {
Image img;
protected PaintableJPanel() {
super();
public void setImage( Image i ) {
img = i;
public void paint( Graphics g ) {
g.drawImage( img, 0, 0, this );
Thanks
RamRam,
I have had printing problems too a year and a half ago. I used all printing apis of java and I still find that it is something java lacks. Now basically you can try autosense. To check whether your printer is capable of printing the docflavor use this PrintServiceLookup.lookupPrintServices(flavor, aset); . If it lists the printer then he can print the document otherwise he can't. I guess that is why you get the error.
Regards,
Kevin -
I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill forms?
Well, try this (I was able to fix my with these steps):
Go Utilities > Disk Utility
Select your Startup Disk, e.g. Macintosh HD
Then, under the First Aid Tab, click Verify Disk Permissions.
If there are errors, then click repair Disk Permissions.
After it is done, restart the computer and see if your problem is resolved.
I hope this help.
Zeke
www.ZekeYuen.com/blog/ -
Technical help needed for button click
Hi All,
Im new to abap, just now started working in my first project. I need some help and start from you.
In my webdynpro component FPM_OIF_COMPONENT : CNR_VIEW, Participate button is there,
so by default u201CCreate Responseu201C button is grayed out. By clicking the participate button, I need to enable the create response button. For this requirement, I need to create a custom class with two static methods : setvalue and getvalue methods. In that methods I need to set the variable = X, if participate button is pressed. And when loading WDDOMODIFY VIEW method, I need to check the value of the variable, if the value is X, then create response button will be enabled.
For this logic, Can you please frame some sample code.
Or please guide me throug some materials.
Please help me in this regard.
Regards,
Rani.
Moderator message: moved from ABAP forums.
Edited by: Thomas Zloch on Jun 29, 2011 11:14 PMHi Rani,
I understand you are new to ABAP basically the webdynpro questions are posted in webdynpro-ABAP, Forums going forward you should adapt the same practice to get a better response.
As you said u201CCreate Responseu201C button is already grayed out it must be already linked to attribute of type wdy_boolean
check the "enable property" of the button.
Coming to your question :
In the "OnAction" event of Participate button write a method for example get value
"Make the attribute" linked to create response button as abap_true hence whenever participate button is pressed it
will make your create response button enabled.
Regards
Bhanu Malik -
I require help with my first website
As you can see from many of my recent posts, I am new to web development, and I have decided that I am going to need some help.
This forum has been a huge help, and I will continue using it, but the reality of the situation is that progress is slow as I am learning as I go, each junction I reach and require help with is holding up progress, which wouldn't be a problem if I had more spare time, but I simply don't.
Is anybody willing to help me? It would be paid work so I would need to discuss how this would work with rates etc... here are some details:
The domain is already setup, and you can see the first page I have been working on here: http://www.elliotnewman.com/index/test7.html
The closet website I can find for your reference is: http://www.jaspaljandu.com/home/
My site will initially not be quite as established as Jaspal's, but in essence the functionality will be similar. The things I know of that I will need help on are:
Setting up the ordering and payment process when a customer wants to order a print, including automated email notifications, and check out forms ( this may also require membership fields or maybe through paypal)
Setting up the interactive framing graphics - ref - http://www.markgray.com.au/gallery/limited-edition-prints/forgotten-island.php
Potentially helping to setup a blog
Work with me on integration - and updates (ie build the all the templates needed so updates and new images can be posted by myself easily)
Automation of the counts of the limited editions
Setting up links to Facebook, twitter, linkedin etc
Reviewing and testing any code that I create
Along with these points I will also need standby help with the code I am directly working on, so file sharing may have to be setup. It is also worth noting that I will supply all the graphics and the design elements for every page, I will also be very specific with briefs as I know exactly what I want to achieve.
If anybody is interested please send me a private message, I would need to see some examples of your experience, details on your availability and your rate - whether thats per day, per hour and a rough estimate on how long you think the work will take.
Also, if anybody knows somebody outside this forum that you think could help me then please also forward this on.
Apologies if this is not the best place to post this.
Elliot.Hi
In addition to Nancy s comments, reading the following line -
Along with these points I will also need standby help with the code I am
directly working on, so file sharing may have to be setup.
What you are basically after is a tutor, to guide you in what you are doing. In this respect it may be worth your while to read-up on designing web pages,as after a quick glance of the code, (from your previous post regarding the background image ) the main problem you are having is that you are not 'implementing' a consistent design/development procedure.
Try reading the following -
General tutorials on html, css, etc - http://www.w3schools.com/.
Design of web site, general - http://articles.sitepoint.com/article/principles-beautiful-web-design.
PZ
www.pziecina.com
Maybe you are looking for
-
Can't Print from various Applications
Safari Application will print, Appleworks, Excel, Word, PowerPoint will not print. E-Mail will. I have a HP Business Jet 1200 v3.3 driver and a HP Color LaserJet 3500 with the most current drivers. I have reset the printer settings, run a program Dis
-
Upgrade of OS 9.1 to 9.2.1 to 9.2.2 errors and system freezes on a G3 Pismo
I am trying to upgrade OS 9.1 to 9.1.2 to 9.2.2 I have downloaded both upgrade packages onto my G5 iMac, burnt them on to a CD and copied them onto a G3 Pismo Powerbook. I unstuff the 9.2.1 upgrade download with its .smi suffix using Stuffit Expander
-
IPhone 4, Display is broken, white, black, grey lines
Sorry if this is in the wrong place! My problem is very hard to understand, basically, I cannot use my iPhone. The screen is 'wobbling', it is 'flashing', has turned white, grey and black! Help! A few weeks ago I did crack the screen, I haven't fixed
-
I tried to upgrade Adobe Reader 8.1.2 to 10.1.3 and could not install it,
-
I receive messages but i can't reply or send any the error message is : Une erreur est survenue lors de l'envoi du courrier : le serveur de courrier a envoyé un message d'accueil incorrect : 5.7.1 <130.157.99.84.rev.sfr.net[84.99.157.130]>: Client ho