TYPING AUTOMATICALLY GENERATES MULTIPLE LETTERS AND ERASES BY ITSELF

While texting my keyboard has started to generate multiple letters, periods after words, and to erase letters that I just typed.
I need to retype everything.
is it a bug, is it broken, do I have an incorrect setting?

Try Pulling the Battery out without turning the phone OFF.
Make sure its not connected to anything (cable, charger), Make sure its turned ON, then pull battery out.
OR
It sounds like a software fault. Even more so if nothing is behind the buttons to cause them getting stuck.
You need to download the latest version for your device from the carrier the phone was sold with.
Save the folder to your desktop, double click it to install it your computer. (can take 40 mins to download)
Then you connect up the blackberry and using the program called application loader,(which is built into the desktop manager program that came on the cd) push the new software to the device. Ensure when you see an 'advanced' box, you click into it, to check both check boxes to remove all current installed software.
Here is a list of software carrier sites:
http://na.blackberry.com/eng/support/do ... _sites.jsp
And Also
Use BlackBerry Application Loader to install BlackBerry Device Software
Good Luck and let us know how you go..
9/10 times this is a software fault.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Similar Messages

  • Automatically generating multiple pdf reports from single(*.rpt) report file

    Post Author: msam
    CA Forum: General
    I would like to be able to automatically pass a parameter list to a single report, and have it automatically generate multiple reports (as saved pdf files), based on the parameter list.
    Is this possible?  If so, could someone point me to some documentation?  Thanks.

    What you probably need to do is generate each bio
    individually with the
    <cfdocument...> tag just the way you want them. And
    then use some of
    the advanced <cfpdf...> functionality that allows you
    to append two or
    more individual PDF's into a single large PDF.
    Here are some resources that describe some of the
    <cfpdf...> functionality.
    http://www.coldfusionjedi.com/index.cfm/2007/7/9/ColdFusion-8-Working-with-PDFs-Part-1
    http://www.coldfusionjedi.com/index.cfm/2007/7/10/ColdFusion-8-Working-with-PDFs-Part-2
    http://cfpdf.blogspot.com/
    http://cfpdf.blogspot.com/2007/06/cfpdf-action-merge_27.html
    http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=cfpdf_02.html

  • Text getting highlighted and erased by itself

    Big Problem with my Mac Book Pro. The cursor moves back as I am typing
    text. Sometimes, text will be highlighted and erased.

    Peter: I know this will sound silly but it's happened to me - the trackpad on my MBP is very sensitive and if I'm typing quickly I'll sometimes 'drag' my thumb (especially my right thumb as that's the one I hit the spacebar with) over and on the trackpad causing the cursor to move. You may want to consciously keep your thumbs higher when you type and see if this solves the problem.
    Just a suggestion...

  • My itune gift card says it's not authorized.  I've tried to redeem by typing in upper case letters and lower case letters.  I've never had this problem before, what do I do so I can use this gift card?

    I bought an itunes gift card yesterday and I have tried to redeem, but when I do I get a message the card has not been authorized.  I have typed in typed in the code as seen mostly upper case and I have tried lower case also.  Neither is working.  I've never had this problem before.  Should the store where I purchased it from done something to supposedly "activate" it.  I'm at a loss.  I do not have the store reciept a friend does, and I'm sure she desposed of it.

    Yes, the retailer is supposed to activate the card. Otherwise they'd lose hundreds to shoplifting. What you normally should do is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. If they refuse to help, as some retailers do, or this was a gift so you cannot contact the retailer, go here:
    iTunes Support
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Multiple T and F records in 1099 Misc.

    We have a scenario where for various company codes there is one 1099 electronic file (magnetic media) to be generated. These company codes have a different TIN hence "Multiple company code" flag can not be used in the country specific section. We have modified the DMEE to fetch company code details from the Company code configuration.
    Now when we generate the 1099 electronic file via program RFIDYYWT. It creates the file with Multiple T, C and F records i.e. per company. Please note that the Transmitter is 1. Hence it should just create 1 T record, multiple A records (payer), Multiple B records ( Vendor), Multiple C record, Multiple K records, and one F record.
    Please note i tried running with maintaining payer details in the country specific screen (with std SAP configuration) it is still generating multiple T and F records.
    I checked on IRS website for the specification it also expects 1 T and 1 F record.
    I looked at the various SAP notes or blogs did not find conclusive solution on this issue. Can somebody help me please ? Am i missing any configuration or setting in RFIDDYYWT ?

    Hi Ashish,
    I'm having the same issue when creating a single 1099 file with multiple co codes. SAP (S_P00_07000134) is breaking it up into different batches within the 1099 file. So in other words .. it inputs the "F" & "T" record lines in between each company codes. As per the IRS this is unacceptable, and the file should have only one "F" & "T" record.
    Could you please share your solution if resolved or please update us on the progress.
    Regards,
    Barnabas

  • Generating multiple recordset names

    Hi All,
    I am doing a scenario which is File to IDOC.
    I am reading a file which is of variable structure , so in FCC i have used the RecordSet Sequence : Variable
    after reading the file i have the structure as
    example:
    - <RecordSet>
    - <W6>
      <WE601 />
      <W602 />
      <W603 />
      <W604 />
      <W605>D</W605>
      </W6>
    - <N1>
      <N101>ST</N101>
      <N102>ZZ</N102>
      <N103></N103>
      <N104></N104>
      <N105>R</N105>
      <N106 />
      </N1>
    - <N4>
      <N401>ST</N401>
      <N402></N402>
      <N403>SD</N403>
      <N404></N404>
      <N405>US</N405>
      </N4>
    - <N1>
      <N101>WH</N101>
      <N102>ZZ</N102>
      <N103>2070</N103>
      <N104> SCS</N104>
      <N105 />
      <N106 />
      </N1>
    - <N4>
      <N401>WH</N401>
      <N402></N402>
      <N403></N403>
      <N404></N404>
      <N405>US</N405>
      </N4>
      </RecordSet>
    But i have to get the recordset name <RecordSet> twice as given below after mapping
    - <RecordSet>
    - <W6>
      <WE601 />
      <W602 />
      <W603 />
      <W604 />
      <W605>D</W605>
      </W6>
    - <N1>
      <N101>ST</N101>
      <N102>ZZ</N102>
      <N103></N103>
      <N104></N104>
      <N105>R</N105>
      <N106 />
      </N1>
    - <N4>
      <N401>ST</N401>
      <N402></N402>
      <N403>SD</N403>
      <N404></N404>
      <N405>US</N405>
      </N4>
      </RecordSet>
    - <RecordSet>
    - <W6>
      <WE601 />
      <W602 />
      <W603 />
      <W604 />
      <W605>D</W605>
      </W6>
    - <N1>
      <N101>WH</N101>
      <N102>ZZ</N102>
      <N103>2070</N103>
      <N104> SCS</N104>
      <N105 />
      <N106 />
      </N1>
    - <N4>
      <N401>WH</N401>
      <N402></N402>
      <N403></N403>
      <N404></N404>
      <N405>US</N405>
      </N4>
      </RecordSet>
    i.e., i am getting 1 recordset after FCC and then after mapping i need to generate 2 recordsets and pass 2 IDOCS.
    Please suggest me how can i generate  multiple recordsets.
    Thanks
    Sai_SHA

    Hi All,
    sorry the requirement is a different one
    I am reading a file which is of variable structure , so in FCC i have used the RecordSet Sequence : Variable
    after reading the file i have the structure as
    - <RecordSet>
    - <W6>
    <WE601 />
    <W602 />
    <W603 />
    <W604 />
    <W605>D</W605>
    </W6>
    - <N1>
    <N101>ST</N101>
    <N102>ZZ</N102>
    <N103></N103>
    <N104></N104>
    <N105>R</N105>
    <N106 />
    </N1>
    - <N4>
    <N401>ST</N401>
    <N402></N402>
    <N403>SD</N403>
    <N404></N404>
    <N405>US</N405>
    </N4>
    - <N1>
    <N101>WH</N101>
    <N102>ZZ</N102>
    <N103>2070</N103>
    <N104> SCS</N104>
    <N105 />
    <N106 />
    </N1>
    - <N4>
    <N401>WH</N401>
    <N402></N402>
    <N403></N403>
    <N404></N404>
    <N405>US</N405>
    </N4>
    - <W6>
    <WE601 />
    <W602 />
    <W603 />
    <W604 />
    <W605>D</W605>
    </W6>
    - <N1>
    <N101>WH</N101>
    <N102>ZZ</N102>
    <N103>2070</N103>
    <N104> SCS</N104>
    <N105 />
    <N106 />
    </N1>
    - <N4>
    <N401>WH</N401>
    <N402></N402>
    <N403></N403>
    <N404></N404>
    <N405>US</N405>
    </N4>
    </RecordSet>
    But i have to get the recordset name <RecordSet> twice , as the file is of variable structure i cannot go for RecordSet Sequence : Ascending .
    - <RecordSet>
    - <W6>
    <WE601 />
    <W602 />
    <W603 />
    <W604 />
    <W605>D</W605>
    </W6>
    - <N1>
    <N101>ST</N101>
    <N102>ZZ</N102>
    <N103></N103>
    <N104></N104>
    <N105>R</N105>
    <N106 />
    </N1>
    - <N4>
    <N401>ST</N401>
    <N402></N402>
    <N403>SD</N403>
    <N404></N404>
    <N405>US</N405>
    </N4>
    - <N1>
    <N101>WH</N101>
    <N102>ZZ</N102>
    <N103>2070</N103>
    <N104> SCS</N104>
    <N105 />
    <N106 />
    </N1>
    - <N4>
    <N401>WH</N401>
    <N402></N402>
    <N403></N403>
    <N404></N404>
    <N405>US</N405>
    </N4>
    </RecordSet>
    - <RecordSet>
    - <W6>
    <WE601 />
    <W602 />
    <W603 />
    <W604 />
    <W605>D</W605>
    </W6>
    - <N1>
    <N101>WH</N101>
    <N102>ZZ</N102>
    <N103>2070</N103>
    <N104> SCS</N104>
    <N105 />
    <N106 />
    </N1>
    - <N4>
    <N401>WH</N401>
    <N402></N402>
    <N403></N403>
    <N404></N404>
    <N405>US</N405>
    </N4>
    </RecordSet>
    i am getting 1 recordset after FCC but i need to get 2 recordsets.
    Please suggest me how can i generate multiple recordsets and pass and pass mutilple IDOCS.
    Thanks
    Sai_SHA.

  • Automatic generation of Proxies and RFC Adapters after change

    After a maintenance on the server, or new transports on the xi, uploading new RFC function modules often the Proxies and RFC Adapters have to be restarted.
    If you are not aware of that kind of changes the messages arrive in the wrong format, funny things happen and so on...
    Question: Is it possible to scedule a job on the xi which automatically generates all proxies and adapters new in order to minimize message/service errors after uploads and changes?

    Did you run program RIMODGEN in SE38 with appropriate variant to generate new integration models ? The spro settings or CFC9 have nothing to do with generation of new integration models. try to do some forum search on Integration Models and you may get some clue.

  • Iphone5 touch screen lost control and went crazy itself

    I had my iphone5 for two weeks. The 2nd day after I had it I started to feel sometimes my touch screen commands were not very responsive. The 3rd day when I was using it with Safari, I totally lost control with the phone. Touch screen commands generated itself. The phone zoomed in automatically, keyboard poped out and started inputing itself with "," , "1", etc. I went to home screen, apps randomly launched itself and the pull down menu kept pulling itself half way. I had turned off and on the phone and the same things still happening. Ended up I restored my phone and it was ok initially. But everyday I felt the non-responsiveness getting more severe and eventually the phone started to go crazy from time to time for a brief moment. Today it completely lost control same as the first time it happened again. I restored it immdiately with itunes and on the initial configuration screen, I cannot even input the wifi password as it input itselfs with random numbers. I can certainly take it to apple store but it seems the problem is intermittant.
    Anyone with iphone 5 have similar problem?

    I had the same issue with my iPhone 4S. When I kept my finger on the touch screen to scroll, the content was jumping up and down. Sometimes I could hold my finger 3mm above the screen and it activated wildly buttons. In short the touch function has gone crazy. The Apple support could not help.
    I suspected that it comes from an over sensitivity.
    I put then a screen protection film on (which reduces the sensitivity) and the problem disappeared.

  • While typing, the keyboard starts typing multiple letters. I'm fed up of this. I don't think I am doing something at my own, it's happening at its own. Is it because of some problem in the hardware since OS and system refresh could not resolve this.

    While i type, the keyboard starts typing multiple letters. I'm fed up of this. I think it's happening at its own. Is it because of some problem in the hardware since OS and system refresh could not resolve this please help.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If you have done this like I describe above and the problem continues I suggest you contact Apple Support or make an appointment at an Apple Store and have your iPad examined by a technician.

  • I am unable to control my iPad 2. It is generating random letters when typing and when I try to delete it generates more letters unless I go slowly! Any advice?

    I am unable to control my iPad 2. When typing and deleting it generates random letters! Any advice

    Start with this and see how it goes. Quit all apps completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How to automatically attached multiple PDF reports to an e-mail and send

    Hello.
    I have a requirement to generate multiple PDF reports using Oracle Reports 6i on the web, then automatically attach these PDF reports to an Outlook e-mail and then bring up the Outlook e-mail dialog box so the user can modify the e-mail (such as adding more attachments, adding a CC, BC, change the message text) before sending the e-mail. I want to be able to initiate all these tasks from Oracle webforms 6i in a three-tier environment.
    I have already read various notes and solutions but none of them address all my requirements. Examples:
    1. Using OLE to interface with Outlook - but OLE does now work on the Web
    2. Using Java stored procedure or UTL_SMTP - but this does not bring-up an e-mail dialog box
    3. Using mailto: in HTML and web.show_document - but this does not allow you to attach a PDF file
    Can you please advise on possible solutions to my requirements. Thank you very much.
    Regards,
    Armando

    Here is a great resource for sending binaries.
    http://otn.oracle.com/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
    You'll want to use utl_http to run each report with a destype=file and then have another procedure running to check to see when all of your reports have finished. After they are finished, you would run the stored procedure to get all of the binaries, attach them in an email and then send it.
    If you want to concate all of the PDF files into one large file, you can do this with a Java stored procedure using iText.
    http://www.lowagie.com/iText/

  • Automatically generate thumbnail image icons for all pix and vids...

    hello,
    i've searched around on the forums a bit about making the icons of my pics and vids actual thumbnail images made from the picture or the first frame of the video.
    a lot of responses are mistaking this question for "how do i put the window into icon view?" this infact is not the answer that i suspect a lot of windows converts are looking for.
    windows automatically makes such icons for all pix and vids if you put the window into icon view.
    i notice in at cmd-j or in the window preferences there is a checkbox for "show image preview" or something like that, but despite this being checked, my pix and vids do not show an image preview. i'm gathering that this information does not exist in the resource fork which mac uses to organize photos.
    is there any script or addition i can make to my system to automatically generate icons for pics and vids of all types? how to i suggest to mac that they add this functionality into the next release?
    thanks for your time,
    max

    The Finder will create icons "on the fly" for nearly all graphic type files (jpegs, tiff, psd, and so on) and display them in both icon view and column view, provided the appropriate view preference has been set. Movies will just have the generic movie icon in icon view, and have a "live" preview in column view, ie you can play them in preview mode. If you want to add a permanent thumbnail which will display in all views, and whether or not the preference has been set for a particular folder in Finder, you'll need to add a thumbnail to the file. There are lots of ways to do this for static pictures, even rather clumsy ways to do it for movies, but the easiest thing is to get CocoThumbX:
    http://www.stalkingwolf.net/software/cocothumbx/
    Drag and drop both static pictures and movie files onto the application and a permanent thumbnail is created. Indeed, it will create cool thumbs even for things like PDF and HTML files (code or rendered display). For movies to get a thumb, they must be in a format that QuickTime can read. It has a set of preferences for just how you want the thumb determined (eg random or at a certain time), and you can drop batches of movies or even folders to have it assign thumbs to multiple movies at the same time. It is a way cool piece of shareware.
    Francine
    Francine
    Schwieder

  • My other computer died and have my bookmark synced setup, however, I no longer have access to sync key and I do not want to generate a new key and erase my old bookmarks. How do I retrieve them?

    My other computer died and have my bookmark synced with Firefox sync, however, I no longer have access to sync key and I do not want to generate a new key and erase my old bookmarks. How do I retrieve them?

    Sorry, without the Sync Key you can't use Sync to recover your personal data. If you have another device that was connected that Sync account, you can recover your Sync Key from that other device in the Password Manager on non-mobile devices. See - [https://support.mozilla.com/en-US/kb/how-do-i-manage-my-firefox-sync-account?redirectlocale=en-US&redirectslug=where-can-i-find-my-firefox-sync-key#w_where-can-i-find-my-recovery-key this].
    ''Firefox Sync wasn't intended to be a "backup" medium, it was made to keep certain data synchronized between multiple devices.'' That "key" is used to encrypt your data before being uploaded to the Sync server and decrypt the data as it is downloaded to one of your devices. Only you have access to that "key", to maintain security over your data no one else knows that "key".
    If you still have that old PC or the hard drive from that old PC, you can connect it to the new PC via USB with a USB enclosure, and you should be able to recover that data if the hard drive didn't fail.<br />
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • Letters generated in bulk and attached to Accounts

    I am a business analsyt and I have just been assigned to the implementation of a Siebel 8 system on Oracle. (No previous Siebel experience)
    We are trying to find a way to send letters out to accounts. They need to:
    1. Include fields from Siebel and standard text (I.e. like a mail merge)
    2. be sent based on specific criteria (some of the criteria includes customised fields),
    3. Generated in bulk (there are too many to be created individually)
    4. Attached to the account record (so we have a record of the correspondence sent to the account).
    We have been informed by the consulting company that is providing the implementation that this is not technically feasible using Siebel/Oracle.
    We have been told that
    A. Correspondence templates will provide us with the bulk generation but will not provide us with the customised criteria and will not automatically attach the letter to the account record.
    B. Proposals will allow us to attach the record to the account record, but will not allow us to generate the letters in bulk.
    They have suggested using Microsoft Word to do a mail merge in bulk or to use proposals to create the letter individually.
    Does anyone know of a way to meet all four of our requirements using Siebel?
    Thank you heaps,
    Nikki

    It's been a while since I last worked with Correspondence, but your requirements don't sound impossible to me.
    Although Siebel might not do it out of the box, but as long as you generate Correspondence for Contacts and the Contacts are linked to an Account, the information is all there.
    It could be that you need some Workflow in the background to set all the fields, but again, doesn't sound impossible to me.
    Based on Bookshelf, you can't set criteria to generate Correspondence in bulk.
    Probably with some customization you can make it happen, but it seems it's not supported by Siebel:
    Generating a Correspondence Request Programmatically in Code (Doc ID 781252.1)
    Unless they changed that between 7.8 and 8.x.
    Metalink3 is your friend...

  • Dunning letters and automatic remittance advise for suppliers

    Hi Friends,
    Can any one please provide a document for setting up dunning letters and Automatic Remittance advise for suppliers process in R12
    Thanks in Advance.

    Hi Chery,
    Thanks for your update, Yes I have reviewed the note
    I am stuck with How to create the xdodelivery.cfg file per Oracle XML Publisher Administration
    Also can you please let me know the process of sending dunning letters automatically to the customers, As there is no standard process. I know we have to customize the process by creating bursting program and add to the request set, but I am nor aware of the process. I have seup the process till running the IEX: Send Dunnings for Delinquent Customers programm and displaying the reminders of the customers which have setup in the XML publisher
    Can you please let me know how to send dunning letters automatically to the customers
    Regards
    Vasu

Maybe you are looking for