Typing text onto a Customized Slide which has been imported in Final Cut  10.0.7

Is there a way to type text onto a Customized Slide in which I imported into Final Cut Pro 10.0.7 (my operating system is Snow Leopard)?

I don't think you understand the question, I want use a slide that I generated from outside of Final Cut Pro and want to be able to modify that slide by typing text or taking text that I generated outside of Final Cut Pro and pasting it into the slide without having to import the slide into Final Cut Pro.  The reason I want to do that is because the Slides in Final Cut Pro do not do what I want it to do....I am putting large amounts of text in my presentation and to have to import each slide individually takes too much time.

Similar Messages

  • Iv'e synced and backed up my ipod onto my old laptop which has now broken, how can i sync and back it up on a new computer without everything being lost?

    Ive synced and backed up my iPod onto my old laptop which has now broken, how can i sync and bakc it up onto a new computer without everything being wiped?

    you will have to plug it into your new computer and connect it to itunes, then hit the backup button it should start backing up. THERE YOU GO! HOPE IT HELPED! please hit the "this solved my question" button

  • Im trying to get some purchased songs to sync onto my ipad, but when i try it says they could not be synced as i need to authorise my computer which has been done already but its still not syncing them can someone help please?

    Im trying to get some purchased songs to sync onto my ipad, but when i try it says they could not be synced as i need to authorise my computer which has been done already but its still not syncing them can someone help please?

    Hello there, Gemss.
    The following Knowledge Base article offers up some great recommendations for the issue you're describing:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Although all of the scenarios may be applicable, many folks find that the following section helps resolve their issue most often:
         Authorize using the correct account name
    The items you're trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
    Select a purchased song in your library and choose File > Get Info.
    Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you'll need to use when authorizing your computer to play this purchase.
    Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
    If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
    If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Does Adobe Acrobat 8 Professional support image which has been converted to a PDF to be edited?

    Hi,
    Does Adobe Acrobat 8 Professional support the content of an image which has been converted to a PDF file to be edited?
    Sometimes when I try to edit the content of a PDF file which was created by converting an image into a PDF file, I notice that Adobe Acrobat 8 Professional tells me that this Adobe Acrobat 8 Professional cannot support this content.
    On the other hand, even if Adobe Acrobat professional could edit a PDF file, I notice that there are far too many restrictions to edit the content, for example, if your new editing words are more than the old then the line goes out the page instead of going to a new line. In addition, if you reached to the end of a line, and then you press 'Enter' to let the rest of words of the last line be written  on the next line, you notice that the words  writes on the words of  line which follows the line which is being edited. As a result, the text would be quite crazy.
    Any comments would be highly appreciated
    Thanks a lot,

    Thanks very much,
    Sometimes when I try to edit the content of PDF files which were created by converting an image into a PDF file, I notice that that Adobe Acrobat 8 Professional tells me that tells me that this content cannot be supported 
    Even in the case of files created from word processing files, I notice that there are far too many restrictions in editing the content. For example, if you insert extra words or characters, the text does not automatically word-wrap. In addition, the "Enter key" does not work properly to insert a new line at the expected position. As a result, the text is quite crazy.

  • I have an ipad3 which has been spontaneously restarting and is not connecting well to either mobile service or wireless networks.

    I have an ipad3 which has been spontaneously restarting and is not connecting well to either mobile service or wireless networks. It has become unusable. Is there  a software update to fix this issue?
    I have tried removing and reinserting the sim card - I am not even being asked to put in the sim pin to unlock the sim
    I have reset the network settings and reconnected to my wireless network. I can get onto the wireless network but the ipad does not connect to my carrier even though my mobile phone (same carrier) has great service.
    It seems to me that due to the connecton issue the ipad then restarts itself so I cant even use it for the local apps that do not require any connection to run because every few minutes the unit reboots.
    heading to an istore tomorrow to have it looked at but wondered if there is a software upate or setting I can change myself to fix this isse.
    not happy after the cost of the unit and ony had a few days use before the issues started!

    Thanks Alan,
    in the end it was replaced at the Apple iStore, they restored factory settings and it was still playing up for them too. Weird but the replacement is working perfectly!!

  • How to get value of a textfield which has been set as Renderd false.

    Hi all
    how to get value of a TEXTFIELD which has been set as Renderd false.
    i am getting the value of this textfield from an lov but dont want to show it to the user.
    getting error as:
    attribute xxxx required for view object yyyyy.
    pls help
    naveen

    You can create item inside your LOV region, set the item style to formValue. You can associate this to a View Object field. It can also act as mirror of any other text input field.
    FormValue can hold the value and will not be diaplyed to user. You can read value from it controller
    example
    OAFormValueBean orgValue = (OAFormValueBean)webBean.findChildRecursive("OrgIdFormVal");
    Or you can read it fro the VO associated with this form value.

  • PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a yhearÉ

    PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ

    Thanks for the quick response ...
    I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
    I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
    Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

  • [svn] 612: Updated milestones.html to mention creation of tags/3.0.0.477 ( rather than tags/3.0.0, which has been deleted)

    Revision: 612
    Author: [email protected]
    Date: 2008-02-21 17:34:50 -0800 (Thu, 21 Feb 2008)
    Log Message:
    Updated milestones.html to mention creation of tags/3.0.0.477 (rather than tags/3.0.0, which has been deleted)
    Modified Paths:
    flex/sdk/milestones.html

    Thank you for this.
    I have been messing around with this last few days, and i really love the feature to pinpoint the validation errors on map.
    I has always been so annoying to try pinpoint these errors using some other GIS software while doing your sql.
    I have stumbled to few bugs:
    1. In "Validate geometry column" dialog checking option "Use DimInfo" actually still uses value entered in tolerance text box.
    I found this because in my language settings , is the decimal operators
    2. In "Validate geometry column" dialog textboxs showing sql, doesn't always show everything from long lines of text (clipping text from right)
    3. In "Validate geometry column" dialog the "Create Update SQL" has few bugs:
    - if you have selected multiple rows from results and check the "Use Selected Geometries" the generated IN-clause in SQL with have same rowid (rowid for first selected result) for all entries
    Also the other generated IN clause in WHERE-clause is missing separator if you select more than one corrective function
    4. "Validate geometry column" dialog stays annoyingly top most when using "Create Update SQL" dialog

  • Just purchased a new pc. Downloaded Itunes. Downloaded some new music. Went to add the new music to my iphone off my new computer but it wants to wipe all of my existing music which has been purchased from itunes. HELP! What should i do?

    Just purchased a new pc. Downloaded Itunes. Downloaded some new music. Went to add the new music to my iphone off my new computer but it wants to wipe all of my existing music which has been purchased from itunes. HELP! What should i do?

    Kford_red wrote:
    Feel a bit gutted as spent £££'s downloading music tonight and not been able to get the songs onto my phone so far!
    The music you just downloaded tonight to your new computer is safe. The music you purchased on your phone is safe.  You shouldn't feel gutted.  It's your other music that you should have taken better care of.  That would include any music you ripped yourself or purchased outside of iTunes.  That you can't get back.
    It has always been the user's responsibility to back up and protect downloaded music.  If you didn't have a backup of your computer before it started acting funny, that's your fault.  It would be no different than if you lost a music CD.  It would not be a record store's responsibility to replace if you lost it.  Digital music is no different.  Similarly, a phone is not a backup medium.  Phone's break, get misplaced or stolen all the time and are not a substitute for a backup copy of your music and media.
    Computers WILL break.  Hard drives WILL fail.  That's why you back up your data. 

  • I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    What happens when the iPod is plugged in?  anything?  any errors?
    Why is 50GB of music gone?  All music should exist on the computer.  Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

  • I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

    I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
    Thanks in advance.
    EtreCheck version: 1.9.15 (52)
    Report generated 19 September 2014 08:07:14 GMT+8
    Hardware Information: ?
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
    Disk Information: ?
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
      [loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
    Launch Agents: ?
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [running] com.sophos.uiserver.plist Support
      [running] com.trusteer.rapport.rapportd.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.amazon.music.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items: ?
      iTunesHelper
      TomTomHOMERunner
      AdobeResourceSynchronizer
      Dropbox
    Internet Plug-ins: ?
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      EPPEX Plugin: Version: 10.0 Support
      Default Browser: Version: 537 - SDK 10.9
      OVSHelper: Version: 1.1 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ?
      Ultimate
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Perian  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 99
      Oldest backup: 2012-04-20 17:05:32 +0000
      Last backup: 2014-09-18 23:49:25 +0000
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          6% InterCheck
          5% iCalExternalSync
          3% WindowServer
          2% CalendarAgent
          2% SystemUIServer
    Top Processes by Memory: ?
      152 MB SophosScanD
      147 MB InterCheck
      106 MB SophosAntiVirus
      66 MB Dropbox
      57 MB com.apple.iTunesLibraryService
    Virtual Memory Information: ?
      161 MB Free RAM
      1.55 GB Active RAM
      1.41 GB Inactive RAM
      902 MB Wired RAM
      611 MB Page-ins
      0 B Page-outs

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

  • I have a Windows 8 laptop which has been updated to 8.1. I'm trying to rename a playlist and it won't let me do it - it did last time but I've updated my itunes since then. What's happened and how can I do it, please.

    I have a Windows 8 laptop which has been updated to 8.1. I'm trying to rename a new playlist in my itunes which I could change befor the last update which was very recent. It won't do it like it used to. Help, please! reetz58

    yeah it is the gayest thing that happens :S what i do is turn off the internet, then open it, then turn on internet, then use it. :S OR make your homepage a tab.

  • HT1212 I have an iphone 3 which has been disabled, I've put it into recovery mode but itunes won't connect to it. I know the password but the device wn't give me the option to add it. What else can I do to enable the device. I can't wipe it from the cloud

    I have an iphone 3G which has been disabled after a child tried to get into it. Itunes will not connect until I have put the passcode in but the device will only enable emergency calls and does not allow a passcode to be put in. I have put it into recovery mode and itunes can't see it. There is currently no SIM card in it and it's not connectng to the wifi so I can't wipe it from the cloud. Any ideas how I can get into it?

    iPhones require a SIM for activation.
    Put the device in DFU mode (google it) and restore via iTunes.

  • I have lost my old itunes account as it had an gmail address which has been deleted by google, the rescue email address is also no longer valid

    i am unable to locate my old itunes account. I save music from my own collection and purchased tracks from itunes. i believe the account was using an old gmail account which has been deleted by google as it was inactive for a period of time. the rescue email address is also not obsolete. Is there anyway of tracking down my old account either by creditcard number or home address? i have not been able to get music on any of my devices, ipad 2 or my iphone 5. really need some help as this has been like it for several months.. probably a couple of years if i thnk about it.

    Welcome to the Apple Community.
    The following article(s) may help you.
    Look up your old and forgotten Apple ID

  • Old computer died and I am trying to install Illustrator CS5 on new computer. Last version I had before CS5 was/is Illustrator 10, which has been installed in new computer. CS5 install says I need CS2,3, or 4 before installing 5, but old computer went dir

    Old computer died and I am trying to install Illustrator CS5 on new computer.
    Last version I had before CS5 was/is Illustrator 10,which has been installed on new computer.
    CS5 install says I need CS2,3 or 4 before installing 5, but old computer went directly from 10 to CS5.
    How can I repeat this 10 to CS5 install?

    It does not seem likely that CS6 was upgraded from version 10.  You might want to check your purchase history in your Adobe account to see if there is some missing link in the chain of purchases you made.
    You can always try contacting Adobe support thru chat to see if they can find information or otherwise assist you in this matter.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Maybe you are looking for

  • Current Record Visual Attribute

    Hallo, In a Dev.2.1 Form I have defined a Visual attribute (VA01 - black on yellow) and then in a Data Base block I have assigned VA01 to the 'current record' property. One item of that block is not a Data Base one. When I scroll the rows of the Base

  • HT201210 my contact names disappeared how do i get them back?

    My iPhone erased all my contact names, but people's numbers are still listed.  Any idea how do get them back?

  • Getting an invalid Item error when resizing(maximizing) the form.

    Hi Experts,                   I have an error when in click sales A/R invoice...i have added some functionality in that as extra...all r working fine but some times when i minimize the window & again maximize(resize) it this error message is being di

  • Doubts in narrow casting

    I was looking for narrow casting examples to understand concepts better. what i have seen everywhere is that after narrow casting that i.e assigining/copying child object to parent object we can use parent object to call method  which exits in sub cl

  • Error - No update server found for context

    Hi I'm trying to write a BSP page that sends E-mail via sap connect. I did try to get the demo program bsptutorialmail from package SBSP_DOCU to work. When I try to send an E-mail, the program terminates with 500 SAP Internal Server Error Error messa