[u][b]Pending Transactions SQL Queries[/u][/b]

Hi,
Can anyone pls help to provide me with the sql queries to extract the number of pending transactions so that I could run the query from backend?
Currently, I have to select organization by organization at front end to view the number of pending transactions. Would appreciate any help. Thanks in advance!
1. Resolutions Required
- Unprocessed Material
- Uncosted Material
- Pending WIP Costing
- Uncosted WSM txn
- Pending WSM interface
2. Resolution Recommended
- Pending Receiving
- Pending Material
- Pending Shop Floor Move
3. Unprocessed Shipping Transactions
- Pending Transactions

Unprocessed material transaction are stored into the table
MTL_TRANSACTIONS_INTERFACE
Pending material transactions are stored into the the table MTL_MATERIAL_TRANSACTIONS_TEMP
Pending and Unprocessed Shopfloor move transactions are stored into the table WIP_MOVE_TXN_INTERFACE
Uncosted material transaction are stored into the table MTL_MATERIAL_TRANSACTIONS with COSTED_FLAG not null (N for uncosted, E for error)
Uncosted WIP transaction are stored into the table WIP_COST_TXN_INTERFACE
Please refer also to the Pending transaction guide you will find in Metalink note Note:102878.1.

Similar Messages

Erratic Report Region Behavior with Dynamic SQL Queries

I'm running HTMLDB v 1.5.1.00.12 and I've noticed some odd behavior with report regions using dynamic SQL queries. Every so often, our testers will run a page containing a dynamic sql report region and get the following error, (despite the fact the query was working only moments ago and no other developer has touched it):
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
or sometimes
failed to parse SQL query:ORA-01403: no data found
The only solution I've found so far is to:
1) Make a copy of the failed report region.
2) Disable or delete the original failed report region.
The new copy of the report region runs without issue.
My search of the forums turned up the following two threads, but neither provided me with a clear explanation of the cause, and how to avoid it:
ORA-06502:PL/SQL: numeric or value error: character string buffer too small
Re: Import Export Error (ORA-06502)
The columns being returned are below the 4000 character limit, and the rows being returned are far less than 32k in size.
Could this have anything to do with the way HTMLDB is internally storing the PL/SQL used to generate the dynamic SQL Query? Is there any known issue related to this with that version of HTMLDB?
This problem occurs without any discernable pattern or consistency, making it hard to determine where I should focus my efforts in tracking down the cause.

Hi all,
My report seems to be behaving correctly once i set it to "Use Generic Column Names (parse query at runtime only)" :)
Cheers,
Joel

Error while running the sql queries in unix as cron job..

Hi,
I've configured some sql queries to run as cronjob from unix,i'm able to excute all the sql queries with out any error,after all the queries are executed,I'm getting the following error message.
ORA-00600: internal error code, arguments: [4080], [1], [131], [], [], [], [],
Could any one advise me why this error is being thrown?
How to avoid this error?
Thanks,
Anil

Are you running these queries through TopLink?
If so, the error seems to be occurring on the database, when the query is being executed.
I have never seen that error before. Performing some websearches it seems to be a general database error, potentially something to do with synchronization. Sorry I can't be of more help, perhaps the database forum can provide more insight...

Transact-SQL debugger not working in SQL Server 2008: "...debugger does not support SQL Server 2005 or earlier..."

I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?

Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang

Need help in SQL Queries using GUI controls or variables

Hello, all
I have a big problem (I have already had with Visual Basic a few mounths ago) with Java while writing my SQL Queries.
I would like to know how I must do to use variable data or GUI control data in my SQL Query to select only some records.
Here, my first Query that works without any problem (no WHERE clause !!!) :
Statement requeteBedes = connectBedes.createStatement();
ResultSet resultatSeries = requeteBedes.executeQuery("SELECT * FROM Series");
initComboBoxSeries(resultatSeries);the method "initComboBoxSeries" fills a JComboBox with all the names of the series in my database.
Here comes my problem.I would like to use the value of the selected "series" in the JComboBox to search in another table of the same Database. I made another statement but it returns a Null ResultSet :
ResultSet resultatSearchAlbumsFromSeries = requeteBedes.executeQuery("SELECT * FROM bandes_dess WHERE ser_nom = '" + strComboBoxSeriesSelected + "' "); The variable strComboBoxSeriesSelected contains the value of the selected line in the combobox with all the series, filled after the first query that is here above and that works very well.
Could some one help me and tell me how I must use variables or GUI controls values in my SQL Queries or tell me if there is a place where I could find an explanation of that kind of problems (like more "advanced SQL Queries", as the ones currently used in all the Learning Java 2 books)
Thank you all for your help.
Christian.

executeQuery() will never return null. At least that's what the spec says. You are probably catching an exception (probably a syntax error caused by a single quote in strComboBoxSeriesSelected) and ignoring it. Or do you mean the ResultSet contains no rows?
Anyway, to use parameterized queries, take a look at PreparedStatements. Your code should look like this using PreparedStatement:Statement requeteBedes = connectBedes.prepareStatement("SELECT * FROM bandes_dess WHERE ser_nom = ?");
requeteBedes.setString(1, strComboBoxSeriesSelected);
ResultSet resultatSeries = requeteBedes.executeQuery();Alin.

How to view pending transactions?

I have a problem where for some reason, things that should be rolled back when ocirollback is called, aren't. I'd like the user to be able to see a list of pending transactions, on that connection, but I haven't had any luck. All I find are posts about tables that I don't have.
I wish I could tell you what version of Oracle I have, but I don't even know. rpm -qa | grep -i oracle turns up empty. I can tell you that lsb_release -a gives
LSB Version: :core-3.0-ia32:core-3.0-noarch:graphics-3.0-ia32:graphics-3.0-noarch
Distributor ID: RedHatEnterpriseAS
Description: Red Hat Enterprise Linux AS release 4 (Nahant Update 8)
Release: 4
Codename: NahantUpdate8

Make sure that every ociexecute call uses OCI_DEFAULT, else the active transaction in the connection will be committed.
Make sure that your application isn't doing DDL, e.g. CREATE TABLE, since this will commit the active transaction.
Pending transactions are shown in v$transaction, which may (or should) not be visible to normal users.
By "list of pending transactions, on that connection" do you means list of SAVEPOINTS, or are you suspending transactions via
a transaction manager or even by DBMS_XA?
Use <?php phpinfo(); ?> and check you have a recent version of the PHP OCI8 extension. 1.3 onwards is OK, 1.4 onwards is good.
You can get the latest source from http://pecl.php.net/package/oci8

How to get the SQL queries based on SQL_ID.

Hi Experts,
I want to get the SQL queries based on SQL_ID.
I have tried the following query,but I am not getting full query.
[code]SET linesize 132 pagesize 999
column sql_fulltext format a60 word_wrap
break on sql_text skip 1
SELECT   REPLACE (TRANSLATE (sql_text, '0123456789', '999999999'), '9', ''),sql_id
FROM   dba_hist_sqltext s
WHERE   s.sql_id = '7tvurftg8zryb';[/code]
One of my friend said use grid to get full query text.
Can you please help me how to use grid ,else any other method to get the full query based on SQL_ID.
Please help me.
Thanks in advance.

You have these many options to set, if sql_text is really huge. But better use a tool(TOAD) as it's really helpful and easy to use instead! (See my previous comment).
column sql_text format A10000
set echo off
set head off
set feed off
set verify off
set termout off
set lines 10000
set long 1000000
set trimspool on
set pages 0
Thanks!

Developing portlets for dummies (sql queries)

Hello, I've been trying to build a dynamic menu. First I went with just plain old plsql: i created a function in the portal schema that returns an unordered, nested list of the pages in my pagegroup and called that function in a regular pl/sql item on my portal page. I did this by querying the wwpob_page$ table and that went just great in my test&development setup (of which I am the admin of course :))
Then I realized that since I'm not an administrator of the server hosting our portal and I only have very limited privileges (I am only a page group administrator) I will probably not be allowed to utilize this function nor will they agree to install it in the portal schema, and I decided I should build a portlet that does the same thing (so it can be registered and so on, and so it can use the synonyms and tools that are available to registered providers). There already is such a portlet (and provider) registered for use in the target portal, but I don't like it because i uses tables and hard-coded styles so I will cook my own, better version. :)
So I downloaded an example portlet and am getting the hang of it, but now I just can't for the life of me figure out how to enable any sql-queries. I have run the provsyns-.sql script, logged in as test_provider/portal and installed my portlet-package as test_provider user. I can see the available pl/sql packages in Toad, but there are no tables or views for me to to see. That means I can't query the portal tables that I need to.
edit: ok, stupid user error; I suck at using Toad, so I was looking at the wrong schema altogether :D So now i see the public views and packages, so forget that bit of the question.
But still, I cannot see even wwsbr_all_folders -view, much less the wwpob_page$ -table. I cannot see any way to find the pages that are in my page group. Somehow it must be doable, right?
Have I done something wrong, missed a step in enabling my test-provider / schema perhaps? I don't really know what I'm doing, but I followed instructions here: http://home.c2i.net/toreingolf/oracle/portal/my_first_plsql_portlet.htm (excellent instructions, thanks!)
So should my portlet be able to access those tables or not? How the heck has the third partly portlet maker done it?
i'm on OracleAS Portal 10g Release 2 (10.1.4)
Edited by: Baguette on 23-Apr-2009 05:13
Edited by: Baguette on 23-Apr-2009 05:32

i see your perspective now. and let me give a perspective to my first reply too.
what i proposed to you was the answer of what i quoted in the message. that is, why didn't you see those views in the new schema you created! and it is still ok but it is done in the portal schema for which you should have privielges too and i assumed you had. my mistake!
now, i can relate your privacy concerns with your earlier message:
Hello, I've been trying to build a dynamic menu. First I went with just plain old plsql: i created a function in the portal schema that returns an unordered, nested list of the pages in my pagegroup and called that function in a regular pl/sql item on my portal page. I did this by querying the wwpob_page$ table and that went just great in my test&development setup (of which I am the admin of course :))
+Then I realized that since I'm not an administrator of the server hosting our portal and I only have very limited privileges (I am only a page group administrator) I will probably not be allowed to utilize this function nor will they agree to install it in the portal schema, and I decided I should build a portlet that does the same thing (so it can be registered and so on, and so it can use the synonyms and tools that are available to registered providers). There already is such a portlet (and provider) registered for use in the target portal, but I don't like it because i uses tables and hard-coded styles so I will cook my own, better version. :)+
+So I downloaded an example portlet and am getting the hang of it, but now I just can't for the life of me figure out how to enable any sql-queries. I have run the provsyns-.sql script, logged in as test_provider/portal and installed my portlet-package as test_provider user. I can see the available pl/sql packages in Toad, but there are no tables or views for me to to see. That means I can't query the portal tables that I need to.+
- by downloading an example portlet, you probably mean you created a new schema. because provsyns work on a schema.
- if you are not the administrator of the portal, and may not be able to access some portions of the portal, it means that you do not use the portal user (the user which serves as the owner of the portal schema).
- now, your plan to create a new schema and give those privielges would still not work. because, by creating a new schema you cannot sneak in to the oriignal portal schema if you do not have privileges to do it. obvious, right? otherwise, it would be a vulnerability of the software that you can see what you are not allowed to see by creating a new schema.
- however, there is a bright side here. the views give records based on your privileges.
- so if your administrators have generated them already or if they generate on the original portal schema, then you may see the pages and items that you have privileges to see and no more.
so now, you may ask the administrators if they have already done it, and if not, then if they would be willing to do it.
hope that helps!
AMN

Ruby code for sql queries

Hello everybody,
First off, let me apologize if my inquiry does not belong on this forum. I am confident however, that someone here has had experience with this since Oracle and ruby on rails/ruby are used frequently. My fingers are crossed, here's is my problem:
I am currently working on a database system that utilizes ruby on rails
with a oracle database. Here's the situation:
the ruby on rails web application is up and running;
my oracle database is full of tables that are populated with data;
there is a successful connection between rails and my oracle database;
however, what isn't finished is I currently have data mining queries in
sql (eg. find minimum time someone has been employed = "Select
min(time) from table...etc") and what I need to do is write one ruby
program for each of my sql queries so that the ruby program:
1) connects to the oracle database each time the query is called
2) runs the sql query on the oracle database
3) takes the results from the query and returns them in an array or
something of that nature (so that I can use the results in an html file
on the ruby on rails web application).
Again, I apologize if this question does not belong on this forum. If someone however has experience with this could you please give me example code of what this would look like (using different sql queries). Thank you

I apologize if this question does not belong on this forum. OTN does have a forum dedicated to Ruby/Ruby On Rails. I admit it doesn't seem to get much traffic. I think that's because most people working with Ruby tend to go for F/OSS products.
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

SQL queries parser.

Hello,
I have quite strange question related to my research.
Probabley within Oracle DB there is some dynamic library which is parsing SQL queries,
for example.
SELECT * FROM schema.table which is able to extract informations from SQL listed above that we want to display all columns from selected table.
When this construction is valid ( SQL standard ) the next step is verification the object existence in DB. It means
that there are two separated actions which are analyzing queries.
I need only first part of that process, which will give me informations about all object used in SQL query
is it possible to accomodate that internal parser witin stand alone middleware like Weblogic Event Server ?
I can do it with regular expression patters, but it's not going to be fast and effective for subqueries and all advanced
constructions for DHW like MODEL, etc.
Thank You,
R.

>
http://search.cpan.org/~rehsack/SQL-Statement-1.23/lib/SQL/Statement.pm
BUGS AND LIMITATIONS ^
* currently we treat NULL and '' as the same - eventually fix
* No nested C-style comments allowed as SQL99 says
>
That's the reason why I want to use dedicated for 11g EE library ;-)
Thanks for quick reply

? in SQL Queries and not using prepared statements

Using EclipseLink 1.1.1
Prepared Statements are disabled
In our production server something went wrong and one of our Read Queries started erroring. A DatabaseException was thrown and we log the "getQuery.getSQLString()" statement. We found this query in the logs:
SELECT t1.ID, t1.NAME, t1.DESCRIPTION, t1.EXTREFID, t1.STYLESHEET, t1.DDSVNVERSION, t1.FIRSTNAME, t1.LASTNAME, t1.EMAILADDR, t1.PHONENUMBER, t1.ADDRESS, t1.ADDRESS2, t1.CITY, t1.STATE, t1.POSTALCODE, t1.COUNTRY, t1.ADMINACCTNAME, t1.HASDOCUMENTS, t1.HASTIMEDNOTIFICATIONS, t1.STATUS, t1.ENTRYDATE, t1.EVALEXPDATE, t1.LASTREMINDDATE, t1.FULLUSERS, t1.LIMUSERS, t1.REQUSERS, t1.ISENTERPRISE, t1.EXPDATE, t1.ISDISABLED, t1.DISABLEDDATE, t1.NEEDLICENSEAGREEMENT, t1.ISWARNINGDISABLED, t1.LOCALE, t1.TIMEZONE, t1.CURRENCY, t1.DOMAIN, t1.DOCUMENTSIZE, t1.EXTRADOCUMENTSTORAGE, t1.ONDEMANDOPTIONS, t1.SSOTYPE, t1.RESELLERID, t1.ACCOUNTREPID, t1.LASTUSAGEREPORTDATE, t1.NEXTUSAGEREPORTDATE, t1.USAGEREPORTATTEMPTS FROM T_SSOOPTIONS t0, T_CUSTOMERS t1 WHERE *((((t0.SSOENABLED = ?) AND (t1.SSOTYPE IN (?, ?))) AND (UPPER(t1.DOMAIN) = ?)) AND (t0.CUSTOMERID = t1.ID))*
Notice the values weren't entered into the where clause. We had to bounce the application to fix the problem. I've never seen this before. I've added more debugging statements to the code - so if this happens again in the future I'll have more information to report on. In the mean time I'm wondering if anyone else has every seen a problem of this nature.

Database error due to invalid SQL statement.
I don't have a stack, we were catching the exception and not printing the stack :(
Like I mentioned in my first post, I added more debugging code (e.printStackTrace()). I understand this is hard to track down without more information. I was just hoping you guys had seen something like this before and had any insight. Like I mentioned before: this is on our production server. I've never seen this type of error before. That particular server (we run in a cluster mode) had been up for several days and then started generating that error. IT bounced the node and everything went back to normal. We have been using toplink for about 5 years now and have never seen this problem, until August 3rd 2009. The only thing that has changed recently is our migration from toplink 10 to EclipseLink. I was wondering if anyone knows if anything had changed in EclipseLink/toplink 11 with the generation of SQL queries.
I'll keep looking. There is more debugging code in there now. Since the error was "Database error due to invalid SQL statement" this implies the SQL was generated, exited that part of the code and was sent to the db where it failed. I'm afraid the printStackTrace won't help if this error happens again.

SQL queries in JSP

Does anyone know how to create a JSP which allows the user to input data into a simple database and then allow the user to input SQL queries? I can do this in a servlet but must hard code the query. It would be great to be able to type in differnet queries to see the results.
Thanks
Michael

hai,
I am giving u a small example which allows user to enter data in the html page and the same is submitted by the Jsp page in the database.
<%@ page language="java" import="java.sql.*" %>
<html>
<body bgcolor="#FFd08d" >
<%!     Connection conn;
     Statement st,st1;
     ResultSet rs,rs1;
     int i,j;
%>
<%
     try{
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          conn=DriverManager.getConnection("jdbc:odbc:--DSNName--","--DataBaseUserName--","--DataBasePassword--");
     catch(Exception e)
%>
     Error in Saving : <%=e%>
<%
     try
     String email_address=request.getParameter("email_address");
     String query_text=request.getParameter("query_text");
     PreparedStatement st=null;
     String inst="insert into databasename..DataBaseTableName(email_address,query_text) values (?,?)";
     st=conn.prepareStatement(inst);
     st.setString(1,email_address);
     st.setString(2,query_text);
     st.executeUpdate();
     conn.close();
%>
Your query is Submitted.<br>
Thanks.
<%
     catch(SQLException e)
%>
Error in Saving : <%=e%>
<%
%>
</body>
</html>
I think this will solve ur query.
bye
sameer

[DW 8.02 + PHP] how to use variables in advanced SQL queries

Hi all,
I can't find a way to use variables in an SQL query after
updating
dreamweaver 8.02.
I always get error messages that says: 'missing variable
type:myvariablename', undefined#myvariablename... and so on.
What is the correct way to use variables?
I usually set a variable in a PHP statement (example: <?
$today=date('Y-m-d'); ?>)
and then I compare this variable in the SQL query.
What is the correct syntax for variable in DW 8.02 in
advanced SQL
queries?
TIA
tony

sweetman wrote:
> I'm editing a website created with DW 8.01 and MX
Kollection.
>
> I updated DW to 8.02 and now I can't edit an existing
SQL query.
> I always get an error message 'Missing variable type'
and I can't go
> on.
InterAKT released a new version of Kollection to cope with
the 8.0.2
changes. AFAIK, you should be able to download the updated
version from
your InterAKT account area.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Guide to differences between SQL Server Transact SQL and Oracle PL/SQL

Does anyone know of a good book (or online guide) that has an in-depth comparison of the differences between SQL Server Transact SQL and Oracle PL/SQL? (Something more than a beginner's guide)

Hello,
Below links will surely be helpful
Discontinued features in SQL 2012
Depricated features in SQL Server 2012
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Multiple SQL Queries in SAP BPC 5.1 EVMODIFY

Hi All,
We have multiple SQL Queries in Outlooksoft 4.2 which extracts data from Oracle source system with different set of selections and conditions and parameters. We were able to use multiple SQL Queries in Outlooksoft 4.2 using Transform Data Flow Task and paste parameters using evModify dynamic script task, where ever extract to source system is needed.
According to SAP BPC 5.1, all these multiple SQL Queries and extracts by passing parameters will be coded in EVMODIFY dynamic script editor.But, EVMODIFY dynamic script editor is not working with the sets of multiple SQL Queris.It's able to recognize and execute the first SQL Query, but not able to execute from the second SQL Query.
Does any body, did multiple extracts using SQL Queries to the source system by passing parameters using SAP BPC 5.1 data manager and SSIS Packages, please let me know, how you did achieve the above functionality.
Regards,
Sreekanth.

Hi Sorin,
Thanks for your update, I tried declaring the variable between %%....GLOBAL(%GTIMEID%,%SELECTION%) and the package runs now but the problem is that the package is executed using the default date value for the variable GTIMEID declared in the DTSX package and its not taken the date that I'm trying to pass from BPC. As showed below, please if you could take a look to the ModifyScript and see the last line for the global variable and line 13 PROMTP(SELECTINPUT,%SELECTION%,,,%TIME_DIM%) where I am selecting the TIMEID:
DEBUG(ON)
PROMPT(INFILES,,"Import file:",)
PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
PROMPT(RADIOBUTTON,%CLEARDATA%,"Select the method for importing the data from the source file to the destination database",0,{"Merge data values (Imports all records, leaving all remaining records in the destination intact)","Replace && clear data values (Clears the data values for any existing records that mirror each entity/category/time combination defined in the source, then imports the source records)"},{"0","1"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after importing",1,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
INFO(%TEMPFILE%,%TEMPPATH%%RANDOMFILE%)
PROMPT(SELECTINPUT,%SELECTION%,,,%TIME_DIM%)
TASK(CONVERT Task,INPUTFILE,%FILE%)
TASK(CONVERT Task,OUTPUTFILE,%TEMPFILE%)
TASK(CONVERT Task,CONVERSIONFILE,%TRANSFORMATION%)
TASK(CONVERT Task,STRAPPSET,%APPSET%)
TASK(CONVERT Task,STRAPP,%APP%)
TASK(CONVERT Task,STRUSERNAME,%USER%)
TASK(Dumpload Task,APPSET,%APPSET%)
TASK(Dumpload Task,APP,%APP%)
TASK(Dumpload Task,USER,%USER%)
TASK(Dumpload Task,DATATRANSFERMODE,1)
TASK(Dumpload Task,CLEARDATA,1)
TASK(Dumpload Task,FILE,%TEMPFILE%)
TASK(Dumpload Task,RUNTHELOGIC,1)
TASK(Dumpload Task,CHECKLCK,1)
GLOBAL(%GTIMEID%,%SELECTION%)
Do you guess That I am missing something?
Thanks in advanced
Regards

[u][b]Pending Transactions SQL Queries[/u][/b]

Similar Messages

Maybe you are looking for