U can hide the message by using #EC! Wht does it mean?

Hi Experts,
When am doing Extended Prog. check, am getting,
1- U can hide the message by using #EC!
Wht does it mean?
2 - No read access to field my_field!
Wht does it mean?
thanq.

Hello,
This is error is gave by Tcode SLIN,
Now in ur case the ur_field is not used any where in the report except the declaration line.
So this error is give by SAP.
In order to hide thiw warnigng u can use the word " # EC NEEDED.-
This is will hide the warning.
But my suggestion is remove the field from declarion.
Regards,
Vasanth

Similar Messages

When I plug my iPod in my computer, "This iPod cannot be used because the Apple Mobile Device Service is not started" message pops up. What does this mean and how can I fix it?

When I plug my iPod in my computer, "This iPod cannot be used because the Apple Mobile Device is not started" message pops up. What does this mean and how can I fix it?

Hello di_gitrdone,
Start with this article describing how to restart this service.
http://support.apple.com/kb/ts1567
B-rock

Hi, I have a problem that I receive lots of Spam messages from my office, which are of no use for me. I am not in a position to bar the message from the service provider due to official constrains. I want to know if I can bar the message on Iphone

Hi, I have a problem that I receive lots of Spam messages from my office, I cannot bar the spam text from service provider due to official constrain.
I just want to know if there is any mechanisme where i can bar the message from a specific sender. I know there are some apps like Iblacklist available but we do not find it in any Iphone which is not jailbreak. I was just thinking of developing some code for it.

No. You can't. Filtering would have to be done at the server level.

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

HT201514 Time Machine gives following error message;- The backup disk image "/Volumes/Data/JOE OTOOLE's Computer.sparsebundle" is already in use. What does it mean?

My normally reliable Time Machine is giving following error message;-
The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use.
What does it mean and how do I deal with it?

I have loaded it into ML using a great and free utility unpkg.. it probably works much the same as Pacifist.
Locate your downloaded 5.6 dmg file.. click it so you can see the pkg but don't bother opening it.
Download, install and run unpkg.
http://www.timdoug.com/unpkg/
Drag the airport utility 5.6 pkg over to unpkg.. and it will create a new directory on the desktop.. named AirPortUtility56.. drill down to Applications, Utilities and you will find the unpackaged utiity.. drag it to your main utilities directory or just run it where you are..

Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
Library Upgrader IS NOT WORKING. Please help

Thx Leonie,
Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>OSBuild</key>
<string>10.10.2:14C109</string>
<key>appRecords</key>
<array>
<array>
<string>AppRecord</string>
<string>DiskImageMounter</string>
<string>com.apple.DiskImageMounter</string>
<string>396</string>
<string>10.10.1</string>
<integer>7</integer>
<integer>0</integer>
<integer>1</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
</array>
<array>
<string>AppRecord</string>
<string>com.apple.ncplugin.weather</string>
<string>com.apple.ncplugin.weather</string>
<string>32.3</string>
<string>1.0</string>
As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

I can't access the contents of my email. I can see the message, but the email itself won't open.

I can't access the contents of my email on my i-pad 2. I can see the message, but the email itself won't open.

There are 3 things you can try:
1. Fully close you mail app. From your home screen, press your home button twice to bring up your most recently used apps (task bar). With your finger, hold it on any of those apps until they all start to jiggle. You'll see a minus sign sign on the upper left side of each app. Touch the on the Mail icon. Touch your home button once more to stop the apps from jiggling and then again to return to your home screen.
2. If that doesn't work, reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.
3. If that doesn't work, the last resort might be to delete this mailbox from Settings > Mail COntacts Calendars, then re-install the mailbox.
I hope one of these suggestions helps.......

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.

First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?

Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

I cannot open mail messages on my ipad mini. I can see the message in the bar on the left, but it will,not open in the message area

MAil will not open the message in the message area...i can see the message content in the side bar, but it doesn't open when I tap on the message

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

How I can hide the iCloud music library in iTunes?

How I can hide the iCloud music library in iTunes? I want to see only my local music library.

If you go into edit and click preferences there is a checkbox in the "store" tab that says "Show iTunes in the Cloud purchases" if you uncheck that it will show only the local content.

How/ where can I download the newest version? Some of the games i used to play does not load now?

where can I download the newest version? Some of the games i used to play does not load now?

http://forums.adobe.com/thread/1195540

How do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes? Once is enough and no checkbox exists to say "do not show this message.....".

When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."

Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

U can hide the message by using #EC! Wht does it mean?

Similar Messages

Maybe you are looking for