U-Exit, BADi for MM01/MM03

Hi,
I was thinking if there is any enhacement for my scenario :
Thing is quiet simple, user wants to change some data of the material index in MM02, but because there are some limitations f.e werks, lgort, etc. user must to click appropriate tabstrips after which the data should be loaded for the specific structures f.e:
If we want  WMARC-WERKS to be filled (in mm02, exit ZXMG0U02->EXIT_SAPLMGMU_001) user must to click on the "Purchasing TabStrip"...
Question is how to avoid case like that ...
Thanks in advance,
Daniel.

Solved
IF_EX_BADI_MATERIAL_OD~READ_OTHER_MATERIAL_DATA

Similar Messages

  • Reg. Exit/BADI for changing item data of PO in ME22N

    Hi all,
    My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
    I have tried the BADI  ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
    Could you please suggest me some suitable Exit/BADI for this requirement.
    Regards,
    Anbarasan K

    Thanks Martin.
    Problem solved by implementing the method Process_Header.
    1. Get the items from Header                              -  im_header->get_items
    2. Loop the item list and get the line item record   - re_item-item->get_data
    3. <- Logic to Update the line item - >.
    4. Update the line item                                       - re_item-item->set_data
    Thank you very much.. Martin.
    Regards,
    Anbarasan K

  • User exit / BADI for training and event management

    Hi all,
    Can anybody tell me if there is any user exit / BADI for training and event management module?
    Thanks & regards,
    LOI

    Hi
    BADI's for Training and Event Management
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
    HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
    HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
    HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
    HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
    HRTEM_READ_OBJECT      Customer Enhancement: Name Format
    RHPV0001 Customer      Enhancement for Additional Checks for Booking
    Enhancemnet Spot:
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    ~~~Ganesh Kumar K.

  • User Exit/Badi for G/L account assignment in ME21n/ME22n

    Hi All,
    I need user exit/badi for account assignment in item details for following requirement.
    If user changes G/L account of the first line item then I have to copy same G/L account to all line items.
    Please suggest me suitable user exit for this.

    hello,
    follow the steps.......
    For User Exit's
    goto to tcode->status->program name->double click on that,
    then goto to-> attribute take the package name and
    Goto SMOD tcode ->Utilities->give the package name and F8
    then a list of exits will display for that tcode as well as that package.
    u can check the table MODSAP
    For BADI's,
    1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
    keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
    then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
    2)Goto to tcode->status->program name->double click on that program will display's
    then  press crtl+F then cl_exithandler
    Thank u,
    santhosh

  • Request for info. on USER EXIT/BADI for FB60

    Hi,
    This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
    ]Please guide some alternative solution rather than user exit and badi.
    I dont think the following user exit and badi are used for withholding tax.
    I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
    F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002 FIDCC1: Change IDoc/do not send
    F050S003 FIDCC2: Change IDoc/do not send
    F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001 Balance Sheet Adjustment
    FARC0002 Additional Checks for Archiving MM Vendor Master Data
    FEDI0001 Function Exits for EDI in FI
    RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00 Line item display: Checking of selection conditions
    RFKORIEX Automatic correspondence
    SAPLF051 Workflow for FI (pre-capture, release for payment)
    Badi
    FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
    Every expert answer will be rewarded.
    Thanks in advance
    Cra

    Try Business Transaction Events. Transaction code BERP.
    Regards,
    Zoltá

  • User Exit/ BADI for ME01- Sourcelist creation

    Hiii
    We need a place exit/ BADi to do vendor validation before saving soource list in transaction ME01.
    Please provide suitable exit / badi for above requirement.
    Thanks ...in advance.!!
    Regards,
    Nilesh

    EXIT_SAPLMBMP_003     AMPL0001     User subscreen for additional data on AMPL
    EXIT_SAPLMEKO_001     LMEKO001     Extend communications structure KOMK for pricing
    EXIT_SAPLMEKO_002     LMEKO002     Extend communications structure KOMP for pricing
    EXIT_SAPLMEQR_001     LMEQR001     User exit for source determination
    EXIT_SAPLMEQR_001     LMEQR001     User exit for source determination
    EXIT_SAPLQBCK_002     QBCK0002     Extended check in procurement

  • User Exit / BADI for  F-02 during SAVE to update BSEG Line Items.

    Hi Experts,
    I need a User Exit / BADI for Transaction code F-02 which triggers during save to update  BSEG-SGTXT with Vendor / Customer 
    name in the Tax Line Item.This is to update table BSEG .
    Thanks in Advance,
    Nithy

    Hi,
    Do it with the BTE 00001120 (tcode FIBF).
    I hope this helps you
    Regards,
    Eduardo
    PD: I forgot, check this link. It will tell you how to do it
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
    Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

  • Exit/Badi for Accounting Document

    Dear Friends
    Is there any user exit/BADI for accounting document. My requirement is quite simple which you would also faced in many implimentation. Client wants number ranges business area/plantwise. I was just thinking as plant/business area is a line item field it may be little difficult to have different number range controll at that level, so I thought we could use user id as the import parameter. But these is possible once I get any user exit/badi for number range change. We dont want to create so many document type also.
    Thanks and Regards
    Pankaj Gupta

    Hi Marta,
    Check these notes
    SAP Note 1259505 - FAQ: New cancellation procedure in SD,
    SAP Note 400000 - FAQ: Transaction VF11: Cancellation of SD billing documents
    See with attention note 1259505 question 4. It says
    Most of the userexits in the SD-FI interface (see note 301077) will not be
    performed.
    So, try to do it with BTE's
    Sorry, try with USEREXIT_PRICING_COPY in program RV61AFZA.
    I hope this helps you
    Regards
    Eduardo
    Edited by: E_Hinojosa on Nov 21, 2011 9:15 AM

  • In ME21N,User Exit/BADI for  Defaulting  Vendor number at item level.

    Hi Experts.
    In ME21N, for every purchase order, we have condtion tab for each line item.
    Many condition typesot taxes  are listed based on the config for the materials.
    My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
    I need a user exit/BADI for defaulting the Vendor number.
    Regards
    Balaji R

    Hi,
    check with below link,
    fo this one you will find both user exit and badis
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
    Regards,
    Madhu

  • User exit/BADI for Deleting the Empty Handling unit

    Hi All,
    Can anyone give me the suitable User exit/BADI for the below scenario.
    While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
    Thanks in advance.
    Thanks
    Ramesh.

    Find below couple of  User Exits for Transfer Order.
    MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
    MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
    The Exits gives you access to LTAK and LTAP.....
    Hope this is helpful to you.
    Vinodh Balakrishnan

  • User Exit & BADI for controling the END user in co06

    Hi
    I HAVE SOME 2 DOUBTS
    1.  I  need a user exit /  BADI  for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
    the control should be actve for specfic order type for specfic users
    2  DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

    Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

  • Exit/BADi for ml81n to check GRN date should be PO Date.

    Exit/BADi for ml81n to check GRN date should be > PO Date.Kindly suggest .

    Hi,
    You can achieve it using the below enhancement.
    Enhancement: SRVEDIT
    Function module: EXIT_SAPLMLSR_001
    Regards,

  • User Exit / BADI for Transaction IW31 to create a POP-UP.

    Hi,
    I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.

    Hi!
    In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
    If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
    Regards
    Tamá

  • Exit/badi for ME22 line item change

    hi gurus,
    pls mention any exit/badi for ME22 line item changes......

    Hi,
    Check below thread
    BADI in ME21
    Regards,
    Atish

  • Looking for Exit/Badi for VA03 TC for blocking the sales order

    Dear Experts,
    I would like to know the user exit/badi for sales order(tc VA03)and program name:SAPMV45A
    1)if the minimum order quantity is less than the order quantity.the order will block and in the second line item for the same material they are charging 100$ and then they will release. the existing logic is user dont want this now.
    2)If a line item is created below the minimum order quantity, the order should get blocked and the user should get a warning message regarding the addition of ZMOQ condition type [u201C Line item Quantity is less than minimum order quantity, ZMOQ condition type is missing u201C
    Please provide the exit name and provide some inputs.
    Thanks,
    V.V.

    Hi Gurus,
    I am trying to find out the exit for warning messages where the SAP has maintained.
    whenever the salesorder creating if the order quantity is less than the minimum order quantity it will give two warning messages. 1.Take minimum order quantity 400 DEV into account in item 000010
                       2.Consider delivery unit 40 DEV in item 000010
    so i want to add the third warning message for condition type is missing.
    I am trying to find the exit in the program SAPMV45A and include names MV45AFZZ and MV45AFZB.
    Please let me know if anyone knows the exit name. where the warning messages maintaining.
    Thanks
    V.V.

Maybe you are looking for

  • All my pictures have a red flag instead of the actual picture?

    I have tried to go on several sites and all the pictures or login bars are missing there is a small red flag in its place. It is fine in internet explorer just not firefox. How can I get the pictures back?

  • Help me, I met an exception in WBXML!!! :((

    when i parse a WBXML for my SoapEnvelope, i receive an exception: "id 10 undef..." .What is it? How to solve it? help me,plz, my brothers....

  • How to make a Business Package

    Hello All I want to create Business Package of the application that I made in the CAF, that contains everything like Roles, Worksets, Pages, iViews. How can I make a Business Package out of that so that 3rd party can use it. When we deploy CAF projec

  • PowerPoint Movie does not load in Safari on iPad

    I borrowed a friend's iPad to learn how to use it. It was gift she received a few months ago from her family. So, it is this year's model. Upon doing so, I thought I would check one of my website's that has PowerPoint movies on them. I chose Safari a

  • Comcast Services are not working in Sunnyvale today (7/28)

    We are experiencing Xfinity service outage now. Does anybody else in Sunnyvale, CA is experiencing any connection issues? Mathew