U-verse Internet Speed is TOO SLOW

Unfortunately AT&T only offers 3 mbps internet service in our area.  The speed is unacceptable for streaming.  Before deciding to drop AT&T service and go to Suddenlink, what can I do to get faster service?  Apparently, AT&T has no plans to offer faster service in our area.

Without having any idea of where you live, or any inside knowledge of AT&T's expansion plans, there's not a whole lot we can tell you.
One option AT&T provides is this, though it could turn out pricey:
http://www.att.com/cellphones/att/wireless-home-phone-and-internet.html#sku=sku7130587
Other carriers have similar offerings.
 

Similar Messages

  • After updating to 4.3 I can't connect to wi-fi because the "internet speeds are too slow". How much speed does this require?

    After updating to 4.3 I can't connect to wi-fi because the "Internet speeds are too slow". So what speed does it need?

    I called tech support and I got the same **** canned response, backup and reset to factory settings.  Yeah right!  Everything was fine until Verizon shoved the software update down my throat.  I finally unchecked the box in Wi-Fi settings for auto network switch.  However, I still get the "Your Internet connection is unstable" warning no matter what Wi-Fi connection I hit.
    In a related story, I received a new or refurbished phone as my original SIII had AC/charging connection issues.  I called probably three times to attempt to back up my data, went into two stores in attempts to have them transfer the information over, and all were too incompetent and inept to assist me.  Only when talking to someone about this Wi-Fi issue, did someone actually know how to back up everything.  Of course by this time, I had to send the new phone back because Verizon charged me $400 before I got everything squared away.  What a colossal waste of my time!

  • My internet speed appears too slow

    My 4 yr. old HP/PC laptop (1.79 GHz 1.0 GB RAM) is twice as fast on the wireless internet in our home than my new Mac Book Pro (2.4 GHz 4GB RAM). How do I increase the speed of my MAC?
    All streaming videos are also slow downloading and constantly pause during play.

    Get rid of all and any 3rd party stuff in your system like those you mentioned: iAnti and MacKeeper for sure.
    There are other things to improve overall performance.
    This is a non-notebook forum.
    You'll get more help in the MacBook Pro and Mountain Lion Communities.
    MacBook Pro 
    https://discussions.apple.com/community/notebooks/macbook_pro  https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro

  • Internet speed is very slow

    Even the macbook is connected to wifi, the internet speed is very slow, even disconnected, if it isn't problem with my house modem, is it related with macbook problem?

    Hi there peihannn,
    You may find the troubleshooting steps in the article below helpful.
    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
    http://support.apple.com/kb/ts3408
    -Griff W. 

  • I am U.S. iPhone 4S user traveling in China.  Data speed is too slow to be usable.  Verizon says that it because iPhone 4S connects to strongest signal even if slowest.  Any work arounds for this design flaw?

    I am U.S. iPhone 4S owner traveling in China.  Data speed is too slow to be usable.  Verizon says that is because iPhone 4S connects to strongest signal, even if slowest (virtually non-existent) data network.  Does anyone know how to work around this design flaw?

    I spent 2 months in china with my old iphone 3gs.  Both China Unicomm and China Mobile were accessible through my US phone.  (for you other users, yes my phone bill was sky high, but it's a small price to pay when you get instant access to your wife while you are gone... and to be able to use the google translate app).  I had a GSM phone (obviously) and had the ability to choose what carrier I wanted my phone to connect to (the same thing was available when I was in italy as well). 
    it was under
    general-> network> then there was a new field (that does not normally show up when in the US) that listed the available networks to connect to.  my phone always attempted china unicomm first, and switched to china mobile only when unicomm was unavailible. 
    but if wjosten is correct (and i imagine he is), cdma phones may not be able to choose what network to connect to. 

  • My internet speed is too low. How to increase the internet speed?

    I am using the broadband internet connection. I check my internet speed.
    My internet speed is too low. How to increase the internet speed?
    Message was edited

    Hi
    :D you cannot increase internet speed!!!
    It depends on your internet service provider and only the ISP can increase it!
    If you have some issues with the data transfer speed then I recommend contacting your internet service provider!
    Bye

  • Windows 7 internet speed is very slow.

    Hi,
    I have a MacBook Pro Lion 10.7.4 and I recently installed Windows 7 by using my install disc and through Boot Camp. I have installed the lastest drivers for Windows through the Boot Camp. Everything was fine except the internet speed on the Windows. It took a long time to load webpages and all my messages on Skype were pending which probably points to the slow internet I am getting from my wireless device. On the other hand, the speed of my internet was fairly fast with a download speed of 500 - 700kb/s on the Mac OSX. My download speed is about 30-50 kb/s on Windows. Is there a problem with my Windows drivers or maybe my wireless just doesn't like Windows?
    Thanks,
    Chris

    What level of speed and bandwidth does your ISP say you should get?
    I would look at the modem, the age of the router, etc.
    Are you on DSL? does not sound like cable.
    Run a test, see what this shows and look at the ping in milliseconds.
    http://speedtest.net/
    It use to be, and I think is still true actually, that Windows has had faster I/O but it depends on your equipment and whether it is 'current' or not. Make and brand. Even if there are firmware updates or supported any longer.
    Can you test with a wired connection? you have a tower, therefore it has two ethernet ports on the back, not a laptop. Distance and interference.
    Get your ISP - see if they have forum, phone support is often a joke but forums can really provide help, whether your equipment is rented or not.

  • My internet speed! so slow, grade D- 76% slower th...

    last nights speed!
    how ? why? can i be paying the same amout as everyone else for such a slow speed?? my kids want to watch youtube videos or even netflix, too slow for btvision, too slow for sky+ on demand.
    this is todays
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 14:11:04
    Downstream
    3,104 Kbps
    Upstream
    960 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.3
    Latency type
    Interleaved
    Noise margin (Down/Up)
    6.2 dB / 5.7 dB
    Line attenuation (Down/Up)
    50.0 dB / 26.0 dB
    Output power (Down/Up)
    0.0 dBm / 12.9 dBm

    Hi Welcome to the community forums
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Hard drive read write speeds are too slow

    I was having an issue with 17inch macbook pro. was getting 4.0mb/s read write speed tops. and smart status failure.
    So i replaced the drive. The new drive is a 7200 RPM 500GB WD drive. I'm getting 12.0mb/s on top speed. Computer feels a little quicker but still slow overall.
    I ran this test on a fresh install of snow leopard.
    Is it just me or do those read/write speeds on the new drive still seem slow?
    2007 17inch macbook pro with 2gigs of ram.

    That does seem slow - on the other hand, what are you using to measure it?
    My 1Tb 2.5" SATA drive performance shows as follows: http://grab.by/7zau
    Xbench Stats: http://grab.by/7zau
    Anything in System Profiler? http://grab.by/7zaR
    Link Speed at 3 Gb?

  • Is anyone else extremely frustrated with the way that Lion handles external monitors now? My internet speed is ridiculously slow as a result.

    I use only an external monitor as my set up will not allow me to use both my Macbook Pro monitor and external monitor efficiently at the same time. In the past, I would plug my MBP into into my external monitor with the lid closed, wake it up and then open the lid with no issues. It was kind of a pain in the rear but at least it worked. Now, opening the lid activates both the MBP and external monitors automatically instead of leaving the MBP monitor off.
    This is an issue because, well, look at the speed test that results from simply closing my MBP lid:
    Look at that MASSIVE drop in speed. I need to use just one monitor. Upon googling my problem, it seems to be widespread problem. At least there was a way to get around it before the screens autmatically changed...

    Support today quoted Apple's engineers as saying it is "expected behaviour" in Lion for the MBP's internal display to reactivate upon opening the lid, even if you want to use only your external display. A new version of the clamshell mode-related knowledgebase article (replacing HT3131) is due shortly confirming this.
    This is despite:
    - obvious temperature-related benefits that were achievable (under Snow Leopard) by opening your MBP lid whilst continuing to output solely to, say, a 27" cinema display
    - wifi connectivity benefits of having the lid open
    - the waste of energy and inefficient use of graphics processing power in needlessly running two active screens (ie if running your MBP in clamshell mode would otherwise make it too hot and/or noisy or you need it open for wifi)
    - negative longer-term impact on the battery and components from running the MBP hotter than it needs to be.
    For any chance of getting the previous behaviour back, we need to ask Apple to change how Lion handles clamshell mode. Options may include changing Lion's expected behaviour or adding a user-selectable option within System Preferences. Now the situation has been clarified as intentional, user feedback on this issue has become all the more important.
    http://www.apple.com/feedback/macosx.html
    In the meantime, a low strength fridge magnet placed on the inside surface along the right hand edge (perhaps above the Kensington lock slot) may serve to convince a MBP that the lid is still closed. It's not something I'd recommend or do personally, but some others are reportedly finding this helpful in the immediate short term.

  • Help!!! App Store in China has one of the biggest problems! The download speed is too slow which I do not want to use it anymore. Most of the Chinese apple users agree with this problem! I hope Apple will give me an explaination for this!

    when you log in the app store in china which has the slowest speed of downloading the apps! Apple needs to explain to us!

    when you log in the app store in china which has the slowest speed of downloading the apps! Apple needs to explain to us!

  • My internet speed is super slow with wifi. I have a 5th generation Airport Extreme

    I have a 5th generation Airport Extreme and a 2nd generation Airport Express as an extender. I have Xfinity as my broadband provider and live in a decent size condo. In the last two months, the speed through my wifi has been horrible. In most cases, I can only get 2mpbs download and barely 1mpbs upload. The hard line connection through my iMac gives me 150mpbs download and 50+mpbs upload consistently.  I've reset my routers and check for the latest software. I'm wondering if the interference from my neighbors wifi signals are to blame. Can someone please help me in restoring some decent speed with my wifi network?

    It's entirely possible that the problem is interference, although resetting the Airports should force them to search for and lock in on the clearest channel available to minimize that.
    Start by simplifying the network. Shut off the Express. Test while connected to the Extreme via WiFi. How's the performance? Can you ping the hard wired iMac from the Wireless network?

  • Mouse wheel scroll speed is too slow

    I have the problem in this(https://support.mozilla.org/en-US/questions/948356) thread and this(https://support.mozilla.org/en-US/questions/948356#answer-422916) answer was closest, but the change reverts after restarting Firefox, even though the settings stay applied. I can switch it back to the old setting, then switch it back to the answer, and that fixes it, but it still reverts after restarting Firefox.
    Still getting it in Firefox v24.0.

    No reply given here provides a valid solution!
    The key parameter here is '''mousewheel.min_line_scroll_amount'''
    One should set it to some high value. I've set it to 100 (I use smooth scrolling OFF).
    Source:
    http://askubuntu.com/questions/27270/increasing-scroll-speed

  • Slow internet speed due to Marvell Yukon LAN driver

    Hello all!
    I am a newbie here so not sure if I am supposed to ask this question here but anyway hope my problem gets solved somehow.
    I am using Toshiba Satellite A200 Notebook, I got this last week and everything works fine except for my internet speed, its too slow. I am on a 10Mb/s plan but my speed is no where close to that. I am getting speeds near 200kb/s to 300kb/s max. After a lot of googleing I came to know that the Marvell Yukon LAN driver is the problem here.
    According to some websites, we are supposed to roll back the driver to a previous version, I did this but still the speed does not want to increase. I have tried almost all the things I can do but getting nowhere so far. I have called my ISP, they say everything is looking good on their side, ran Norton Antivruis scan on this machine, disabled firewall, and the list goes on but nothing.
    It would be great if anyone could help me out here.
    Thanks in advance...

    Hi,
    did you checked your connection with another computer, if the problem still exists with another machine??
    Would be really interesting...otherwise I suggest you to recover your machine to "factory-default". Maybe it solves something.
    Another idea would be to remove the "Qos" (Quality of service)service from your network connection which virtually slows down the connection due to software reasons.
    Please give some feedback and please tell me which system youre using (Vista, XP)
    Thx
    bye

  • Internet connection too slow, is there a way to speed up the itouch?

    So I can connect to Facetime, but all I see is a picture of a person and then the Itouch freezes and shuts down. I think it is because my internet connection is too slow, because it only doesn't work in my apartment (it works at places with quicker connections).
    The question is, is there currently a fix to this problem (I can't be the only one who has it)? It all works, just freezes after connecting and showing the picture of the person I'm talking to then disconnects. Is there a way to make this work?
    I'm at college and the only reason I got the 4g from my parents is 'cause they wanted me to help my little bro with homework back home... but if Facetime doesn't work at college then I should sell mine and go with a cheaper, earlier generation. Thanks!
    Message was edited by: ClassyCoug

    By what type of security I mean, WEP (not preferred), WPA, WPAs. I would go to the support page for you router on the manufacturer's sit to see if an update to the firmware is available. You also have to enter the setup for the router to determine the installed version of the firmware. Not infrequently a firmware update fixes problems since that is one purpose of the updates.

Maybe you are looking for