U0093Production Order Finish Dateu0094 is updated w/the current date.

After removing the delivery block on a sales order schedule line, the
Production Order Finish Date is updated w/the current date. It is happening in Release 4.7.
Why it's happening.

Thanks for the reply, Dharma!
I check my config and the system has the following settings:
OPU3 - Start date in the past is set to 30 days w/backwards scheduling. The production order in question has a start date less than 1 week old.
OPPQ - Indicate start date in the past is allowed.
It's also worth noting that a new schedule line is created after the finish date is updated. The new schedule line delivery date is equal to the current date.
Any other ideas?
Edited by: Cal on Jan 25, 2008 5:32 PM

Similar Messages

I pre-ordered an iPhone 6 Plus and the delivery date now says October 14th. The point of the pre-order is to get it on release day (or shortly thereafter). Can I go to a Verizon store to pick up my new phone on release day?

I pre-ordered an iPhone 6 Plus and the delivery date now says October 14th. The point of the pre-order is to get it on release day (or shortly thereafter). Can I go to a Verizon store to pick up my new phone on release day?

I'm not sure that answers the question Candice.
I'm in the same situation. I was up trying to get on the Verizon page at 11:55, kept getting the ECPD error. When finally got through, the Silver Iphone Plus 64 showed arrival of 9-19. At every step of the process, it seemed that I was ordering a phone that would arrive on day1. At no point did it say this was an estimate. At no point did it say it might change. In a big yellow box, it said "9-19". Ordered it, then got confirmation email stating it should arrive at 9-19. Seems like all should be good, right? Order site said 9-19, I've got a confirmation email saying 9-19, done and done.
Then I check the website, and suddenly it changed to 10-14?!?!?!? I feel like this was a bait and switch. I was able to pickup an iphone5 in a local store on launch day, and would not have locked myself into a preorder through Verizon if I had known this would happen!
So, that leads back to the original questions. Lets assume I walk into a Verizon store on 9-19, and there is an available iphone6 plus just sitting there, can I either get that phone as fulfillment of my pre-order. Or, cancel my pre-order and buy that phone right then and there?
JJK
PS: It seems there are many people you misled this way. For every person who takes the time to post on this site, there are going to be many many more who are silently ****** off.

IPod "cannot be updated. The current file is in use."....how to fix?!

I have a MacBook and the iPod Nano that came with it. I also have a 4G(I think) 20GB iPod. I have both configured to my Macbook, using only certain playlists to be updated on each iPod.
I don't get any problems when I connect the 20GB iPod(w/ the Firewire), but whenever I connect my Nano(w/ the USB, I have to, it doesn't support Firewire), I get a message saying the iPod"cannot be updated. The current file is in use."
How do I fix this problem? I have my iPod to "Enable disk use", but everything else is OK, and I have separate playlists and designate each iPod to Sync Selected Playlists Only, and have different playlists selected.
How do I fix this and/or why is this problem happening?
(and I'm still going to ask any kind souls to check my previous posts and answer my Playlist Question thread, as that is a nagging problem as well)

I fiddeled around and I am still having this problem. Can someone help me.

After updating to the current versions of Adobe, I can no longer scan and send emails.

After updating to the current versions of adobe, I can no longer scan and send emails nor can I open an attachment upon receiving an email.

Capt Camo wrote:
After updating to the current versions of adobe...
What exactly is "adobe"? Adobe is the name of a company that has hundreds of software products, each with a distinct name.
You are posting in the Flash Player forum; do you really receive emails with Flash attachments?
Flash Player also cannot scan or send emails.
Finally you give no information regarding your operating system, email client, etc.

Will ios6 be available as a free update on the current new iPad

Will iOS 6 be available as a free download update on the current 3gen iPad or will it be something that have to be purchased????

The only iOS Updates Apple charged for were iOS 2 & 3, and that was for iPod Touch....
It's always been free since then...

Will the iPod nano 7 get a new update from the current 1.0.3?

Hey Guys I was wondering will the iPod nano 7 get a new update from the current 1.0.3?
If anyone knows or has and info or rumors pleas tell me.
Thanks
email *****
<edited by host>

Apple might release small updates for 4th generation iPods touch if they find serious issues like the FaceTime problem that made Apple release iOS 6.1.5 for the 4th generation iPod touch. However, this device won't receive any major iOS update.
The 4th generation iPod touch has got 256 MB of memory, and iOS 7 devices have got 512 MB or more of memory

How to find photos which have not been updated to the current Process Version?

How can I search and/or filter to find photos which have not been updated to the current Process Version? I would like to get a list of the photos rather than going through them one by one and looking for the lightening bolt.

Thank you! As my memory fades, it is good to know that my memory is backed up with you and others on this forum!

HT4972 How does someone who has a 1st generation iPad but no computer update to the current operating system?

How does someone who has a 1st generation iPad but no computer update to the current operating system?

You take the iPad to someone or somewhere where you can update the device using iTunes on a computer. There is no other way to do it. You must use iTunes on a computer.
Apple Stores will update the device for you. Make an appointment at an Apple Store for help.

SCCM Reporting: Software Updates / Apllication the "Installed date" is missing or null in reports

When the “V_GS_Add_Remove_Programs” or “V_GS_Quick_Fix_Engineering” queried for installed date (the views that contains information on updates/application
installed date), the “installDate0” Column returns “Null” or is
"blank" on most of the rows.
The machine in this example is “X”
2. As you can see from the machines X's add remove Programs installed Date is given clearly.
Appreciate your help on this as its for an audit report of windows updates and applications installed date, I know that some applications do not populate this value but my argument is if its visible from Programs and Features why isn't the data being collected.
Best Regards,
Michael

Duplicated post.
http://social.technet.microsoft.com/Forums/en-US/678489ad-3289-4fd6-8e84-bbaf487abacf/sccm-reporting-software-updates-apllication-the-installed-date-is-missing-or-null-in-reports?forum=configmanagergeneral
http://www.enhansoft.com/

How can I make iCal in Lion open to the current date?

I just updated from Snow Leopard to Lion and have had all of the frustrations with changes to iCal that are well-documented here and elsewhere. One issue I haven't seen addressed, however, is a new behavior after quitting and re-starting.
Previously, no matter what month/day/week I was viewing when I quit iCal, it would open the next time to the current (month/day/week). Now, it opens to whatever date(s) I was last viewing when I quit.
This is highly annoying - 99% of the time, if I quit iCal while looking at (some date 6 months into the future), that is NOT the date I'm looking for when I re-launch. It's much more consistent behavior to always re-open to the current date, in whatever view (month/day/week) I previously used. So if today I launch iCal and I'm thinking about adding an event a month in the future, I open iCal, change to month view if needed, and go forward one month. This is the way iCal always worked previously. Instead, the version in Lion might leave me on any random month, depending on what I was doing when I closed the program the last time, and so I have to figure out "what month/week am I looking at?" before I know how to navigate. Very irritating. (As is the move of the forward/back buttons away from the month/day/week buttons, necessitating that I move the cursor to two different areas of the screen in order to navigate. Whose idea was THAT?)
I haven't found a preference to resolve this bizarre behavior change. Can anyone help?

Hi,
I don't know of a preference, but have you used ⌘-T in iCal?
Best wishes
John M

FI line items up to the current date

Hi all,
I read the SAP note 485958 "BCT-FI:Extracting FI line items up to the current date" and I have some doubts here:
1. After I've set parameter BWFIOVERLA to 'X' and extract delta at 6PM, will FI data that is changed before 6PM for example a gl entry at 5PM, goes into my delta extraction?
2. What does BWFITIMBOR mean by having default value 02:00:00?
3. Is this note applicable if my R3 PI release is at 2003_1_46C?
Please advise.
Thank you.
Celeste

Hi Celeste,
Pls go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm
Excerpts from this link regarding your doubt:
BWFIOVERLA: The logic of this parameter prevents records with the previous day as their CPU date from still being in the update at the time of extraction.
If X is set for this parameter, selection is made up to the previous day if the time limit is not reached.
If <space> is set for this parameter, selection is made up to the day before the previous day if the time limit is not reached.
BWFITIMBOR: This parameter designates 02.00 (2 A.M.) as the time limit for extraction. If this limit is not reached, the system uses a security interval of one day to determine the To-value of the selection. If extraction is started before 02:00 therefore, the selection takes place only up to the day before the extraction run.
Hope it helps you!!!!
Regards,
Amit

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Goods Receipt in the Current Date however Goods Issue in the previous date.

Dear Experts,
I am doing a GR through MB1C (Movement Type 561) in the Current Date (Both Posting and Document Date are current) for a Particular batch of Material. However when I am trying to create a sales order->Delivery and PGI in the past date the system is allowing me to do so. What could be the issue ?
Example : On 23-02-2010 Goods Receipt of Material "A" for 50 Tons for Batch "B100" done through MB1C Movement Type 561.
Stock in System as on Date 23-02-2010 in MMBE is showing 50 Tons of Material "A", Batch "B100".
A Sales Order is created for 22-02-2010 for the same Matrial, qty, batch and PGI is done on 22-02-2010.

Hi,
Issue is that previous period is not closed that is why system allow to create delivery in back date.
Kapil

How to get the "current date" in the BEx?

Hi all,
I need to get the "current date" in my Bex report in order to make a comparison. I know there is a "How to" which shows how to get the current date via a User Exit, but I didn't find it. Could you please help me?
Thanks

1. Create a New Formula in Key Figures structure
2. Give tech name and description and Select "New variable" option
3. Next screen will launch Variable Wizard -> create a new variable with replacement path as processing type
4. in next screene select the date characteristic that represents the first date to use in the calculation (From Date)
5. In the next screen select Key in the Replace Variable with field. Leave all the other options as they are
6. In the next Currencies and Units screen select Date as the Dimension ID.
6. Save variable
repeate the Above steps to create another variable (To Date)
and now you can use these two new replacement path variables in your new formula.
Dev

Acrobat 9 - how do you create a dynamic stamp to include the current date (java script)

I have seen my question multiple places and times but the resolutions provided have not worked for me.
I am running Acrobat 9 Pro, cannot run X or XI due to the use of ProSystem fx Engagement.
I want to create what I thought would be a simple stamp. My initials and the current date. i.e. "crm 01/10/13".
Simple right? I created a PDF of my initials. Now I just need the text field with the proper Java Script to insert the date, correct?
I have tried opening "Dynamic.pdf" and copying and pasting the text field that includes the Java Script:
" event.value = (new Date()).toString(); AFDate_FormatEx("h:MM tt, mmm dd, yyyy"); "
The date does not update, it stays static.
I have manually entered the Java Script.
I have edited the Java Script to remove the "Ex".
I have edited the Java Script to revise the "yyyy" to "yy".
I have edited the Java Script to remove the " h:MM tt, " trying different formats to get "dd/mm/yy".
I have selected "Use single-key accelerators to access tools" in Preferences/General.
I have tried PDF files, PNG files. I have created the image files from Word and Excel.
I am at my wits' end. Can someone PLEASE assist me to resolve what should be a simple issue (I hope).
Thank you in advance.

Thank you for your response.
Your script works well, but I still have the same issue. The date is remaining static to the system date when the stamp is created. My initial idea was to create a pdf of my initials "crm" and then add the text field with the java script for the date behind my initials. "crm" + (TEXT FIELD with JS). I wanted 3 stamps, red, blue and green. The colors correspond to specific processes in our workflow.
Your script adds my initials as well as the date.
My machine is running Windows 7.
My stamps are located:
C://Documents/Acrobat Stamps/...
Acrobat templates:
C://Program Files (x86)/Adobe/Acrobat 9.0/Acrobat/plug_ins/Annotations/Stamps/ENU/...
I have no problem creating stamps, just a stamp that will use the current system date. I HATE using the typewriter for my initials and the date. I guess I can stamp my initials and then type the date...but what is the point?
Do you have any further thoughts or suggestions?
Thank you very much.
crm 01/11/13

U0093Production Order Finish Dateu0094 is updated w/the current date.

Similar Messages

Maybe you are looking for