U0094Generate Export data Source" form multi provider.

Hi,
If we give the context menu to the multi provider we get an option that Generate Export data Source. That means is it possible to generate the data source from multi provider. If yes , then we will load data from one multi provider to another data target.
How can we see the data in Multiprovider.
Regards,
Venkata Sharma

A Multiprovider has no storage of data.
But you use a query build on top of it, and see the data from the Datatargets that are used on that Multiprovider (can be cubes, info-objects, info-sets).
I am working in BI 7.0 and I don't have the option of generating the export datasource!
Hope it's clear now.

Similar Messages

80IC_C03 Export data source

Hi,
As far as I know, fact table of cube 0IC_C03 stores only inflow and outflow key figures and not the main key figures.
Hence, the cube does not have a record for every 'Calday'. In query, Stock is calculated for any 'Calday' at runtime.
When I generate export data source, it provides 'Inflow', 'Outflow' as well as main stock KF.
Shall I conclude that the export data source gives me record for every 'Calday'.
If not, please give me suggestion how to get stock for every calday so that I can update it into another data target,
Thanks,
Anup

Hi
You can take a query based on 0calday and you can use APD to upload the query data into any data target
Look this
http://help.sap.com/saphelp_nw70/helpdata/en/dd/88a1004d16824dac8b40cc223d466e/frameset.htm
Cheers
gn

Diff b/w Data Mart & Generate Export data source

HI All
Here i want one small clarification.
will you plze help me regarding of the following
I want to know the Difference between Data Mart & Generate Export data source.
In my point of you both are little bit same.
any way some budy explain with full details.
If you provide any help doc its too help ful for me.
Regards n Thanks
kgb

Hi kgbm,
This my point of view:
1)DataMart: in BI you use this term for identify a specific area of analysis in your DataWarehouse. Generally it is obtained with an aggregation of data of other structures, or combining internal data with external data.
2)Generate Export D.S.: it is the technical tool to obtain an extractor to feed other structures, called DataMart.
Ciao.
Riccardo.

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Data load issue with export data source - BW 3.5

Hi,
We are facing issues in loading data with the help of export data source.
We have created export data source of 0PCA_C01 cube. With the help of this export datasource, we are loading data to other custom cube. Scenario is working fine in development server.
But when we transported objects to quality server data is not getting loaded to custom target cube.
It is extracting zero records. All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs. Every object is active but data is not getting extracted.
RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development. We are in BW 3.5 with patch level 19.
Please guide us to resolve the issue.
Thanks,
Aditya

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Error While Transporting export Data Source

Hi Experts,
We have a requirement to transport a data source from development to quality system through acceptance box.
We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
Please suggest how to get these 2 fields in acceptance box.
Thanks,
Sachin Motgi

Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S

Creation of the export data source failed

trying to activate ods but getting this message that the creation of the export data source failed.
and it also gives message that RFC Connection to source system is damaged===> no metadata upload
Please can someone help me with this.
Thanks in advance.
Michelle

Hi,
Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
Or try restoring ur source system connection by
Source system-> Restore.
Its sets all the default conenctions b/n ur systems.
Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
Hope this helps-
Regards-
MM

Problem with delta update on customised export data source.

Hi all BW gurus,
I have created several customised export data sources in the R/3 system. And I have made use of the utility program <Z_CHANGE_DELTA_PROCESS> to update the ROOSOURCE table.
While this can result in being able to do initial update (instead of full update), the subsuquent delta update is not working.
In RSA7, the datasource is with green light and in RSA3, the extractor can extractor data out of it.
Does anybody have some idea on this?
I heard that there is a way to change the Business Transaction Event (BTE), but I don't quite understand how this is performed. And wonder if this is the only way out. To me, the triggering point would be the same, meaning the InfoPackage would be executed, then call the extractors in R/3 to extract the delta update in order to load into the InfoCube.
And how do others do for executing delta update of the customised data source?
Thanks a lot!!
The utility program of <Z_CHANGE_DELTA_PROCESS>:
=================================================
report z_change_delta_process .
*P_DATAS DataSource
*P_DELTAP Delta Process for DataSource
parameters:
p_datas type roosource-oltpsource,
p_deltap type roosource-delta.
tables:
roosource.
data:
ls_roosource type roosource.
if p_datas(2) ne 'Z_'.
   message 'The DataSource needs to begin with ''Z_''.' type 'E'.
endif.
select single * from roosource into ls_roosource
       where oltpsource = p_datas
       and objvers = 'A'.
if sy-subrc eq 0.
   ls_roosource-delta = p_deltap.
   update roosource from ls_roosource.
message 'The DataSource has been updated successfully.' type 'I'.
else.
   message 'The DataSource entered is not valid, try again.' type 'E'.
endif.

Doesn't anyone have any idea on this topic?
Appreciate for all the help. Thanks.

How to see data in the multi-provider ?

We have a multiprovider with the key figure as total stock, and its given as a non-cumulative kf which has a check mark next to it. Its getting data from the infocube to it, I mean there are 4 infocubes and 1 ods to the multi-provider. If I right click and see the infocube or the multi-provider and select the fields by rite click and I am unable to see the total stock kf. But if I click the actual multiprovider and click display instead of display data, I am able to see the keyfigures folder, if i expand that I see stock quantity folder and many other folders. If I expand stock quantity folder, there are 3 kf's ztotalstock, 0isstock and 0recstock. In those ztotalstok is non-cumulative checked. And I am unable to see the kf value when i rite click on the mp. So any suggestion to display the data by selecting a posting date in the mp. What my guess is , will there be any internal table/view to display the mp data. Please let me know any suggestions.
Thanks for your time,

Prasanth, entering the mp name in LISTCUBE is same as right click on the mp and click on display data, where it will give the selecting criteria for the fields. But here both will display the same fields, that is not my case. I am unable to see one of the key figure which is inside the mp, have you opened any mp. Please right click on it and choose display and then go to the key figures folder , if you open that you have lot of folders in it based on the category. IN my case its the stock kf folder and if you expand that there are three kf's out of the three, one is ztotal stock which is declared as non-cumulative kf, rite next to it, option is checked. So I think that is the reson we are not able to see ztotalstock kf , no matter in the listcube or display data option on the mp. Hope you got my situation. I know how to see the data in the multi-provider or infocube. But in this case its not displaying that ztotal stock keyfigure, but in the reporting we can see the data on the mp. My question is why am I not able to see the selection for that ztotal stock key figure , either in listcube or rite clik display data option. Did anybody face this situation.
Thank You,

Export data from forms to excel

HI
In my application im trying to export data from forms to excel.Everything works fine.First of all im using get_file_name for selecttion of file and passing it to ole2 package as follows
FILENAME := GET_FILE_NAME(File_Filter=> 'XLS Files (*.xls)|*.xls|',dialog_type=>SAVE_FILE);
     ARGS:=OLE2.CREATE_ARGLIST;
     oLE2.ADD_ARG(ARGS,Filename);
     OLE2.INVOKE(WORKSHEET,'SAVEAS',ARGS);
The problem is if i select an existing file the get_file_name itself raises one message ".....file already exists Replace an existing file?"
Similarly the excel also also raises the same message "".....file already exists Replace an existing file?".I want to suppress atleast one of them? Could anyone help for this problem?
appreciate ur help
THANKS

Looks like...
ole2.set_property( ex_app, 'DisplayAlerts', false );
where "ex_app" variable Excel Application -
     ex_app:=     ole2.create_obj('Excel.Application');
and more Question:
When i close excel app - in process viewer i see "excel.exe"
ole2.release_obj don't work :(

How to find Info Source for Export Data source in Data Marts node

Hi
I need to load data from ODS to Info Cube. I created the Export Data source for the ODS. I can see the Export Data Source but in the Data Marts node of Info Source i cannot find the Info Source for the Export Data source i created. I replicated Data sources in the BW source system. I also tried to use Insert Lost Nodes from the Context Menu of the InfoSource node but nothing worked. Please let me know what i need to do to see the Info source in the Data Marts.
Thanks
Padma

In the infosource tab in RSA1 - use settings --> display generated objects
you will be able to see the datamart infosources..

Export Data Source Transport Problem

Hi All,
I have IO FI Super Number - did export data source for that and generated 8zfssupno for myself BW system in Dev system.
Used that export DS for another MD Account and created transfer rule.
Now when i try to transport the Request to QA env. the export DS request shows status succesfull but cannt find 8zfssupno DS into QA system and my transfer rule request has been failed to transport.
i collected DS twice but both requests are also not identical.
One has Object Directory Entry -->R3TRISFS8ZFSSUPNOT
and the other one dont.
i can see my export DS in t-code RSA6 also.
Do i need to transport the main IO FI Super Number before transporting export DS ?
can someone pl. give me the solution ?

the error log:
Extract structure /BIC/CE8ZFSSUPNO is not active
The extract structure /BIC/CE8ZFSSUPNO of the DataSource 8ZFSSUPNOT is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
The errors affect the following components:
<b>Thats means DEV BIW should have conversion mapping with QA BIW as the source system conversion.</b> ---> How to do that ? understood that its for myself BW system so it should be covert to QA from Dev.
Yes, finally i did it manually. but as u said it should work i can try to transport it to other env. please advise.
Message was edited by:
        Keral Smith

Export Data Sources DEV Transport to Acceptance

Hi Friends I am having a Export Data Source 80VELEXT created in Development System. When I transport that Datasource to Acceptance. It is not getting activated. I checked in RSLOGSYSMAP Table. I do not see the DB4CLNT120 --AB4CLNT110 Check mark. Is it required to be ticked to activate this. But when I consulted MY SAP Basis team they told it is not required to be checked. They told only D53CLNT120 -- A53CLNT120 ECC - ECC is only required. Please help me how to activate this Export Datasource in Acceptance.
Thanks
Soniya Kapoor

Hi Ravi, Please tell me exact step where you want me to change the source system to your Acceptance system Is it in the table RSLOGSYSMAP. OR where. I just created these datasources IN BI and nothing else is required no dtp no trans nothing. Just the Datasource and I need to transport this.
Please help
Thanks
Soniya

ERROR WHEN GENERATING EXPORT DATA SOURCE

Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.

Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish

Regarding Export Data Source !!!!!

Hi Gurus,
i have a requirement to create a export data source in production system for master data infoobject.then i have to replicate it into Development system. The doubt is once this export data source is created in the production system where i can find this? RSA5...or there is some other transaction? and before replicating these export datasource to Developmentsystem, do i need to activate it?( I know there is prefix of 8 in export data source).
Immediate reply will be appreciated.
Thanks in advance.
Regards.
Agupta

Hi,
You can create it> master data InfoObject>rt click>additional function>export data source.Now you can find it in the datasources in the Source System. Go to Source systems and go to Datasource overview for your BW system. You should find the datasource 8****** under BW Datasources-> Business Info Warehouse -> Data Marts -> Data Marts Master Data.
Regards
CSM Reddy

U0094Generate Export data Source" form multi provider.

Similar Messages

Maybe you are looking for