U00A7VC in Purchasing, Purchase requisition of configurable material

Hello Experts,
We have the scenario as described below:
Material A - Parent KMAT (Internally Manufactured)
Material B - Child KMAT (Internally Manufactured, Has its own BOM &assigned to BOM of Parent KMAT with item category L)
Material C - Child KMAT (Externally Procured, No BOM of its own & assigned to BOM of Parent KMAT with item category N).
All the 3 materials have their own Chars,Class& config.profile.
Now, In CU50 while configuring Material A, we see a separate line for Material B under Material A for configuration. The values are assigned and the process goes as expected till BOM explosion and no issues with it.
However Material C does not show up in CU50 for configuration while configuring Material A. If Material C is entered in sales order, no Purchase Requisition is created in MRP run (Sourcing,info record.etc have been taken care of and the material can be procured with no issues when directly creating the PR).
It would be of great help if someone could help me solve this. We should be able to configure Material C while configuring Material A in CU50 and a PR should be generated with assigned values for Material C.
Any solution will be amply rewarded.
Thank You,
Manoj

Hai Manoj,
i have a few clarifications on your request. You have explained that
Material C - Child KMAT (Externally Procured, No BOM of its own & assigned to BOM of Parent KMAT with item category N).
If material C does not have BOM then why do you maintain this as KMAT. Cos KMAT are materials which have super BOM and it gets picked from the characteristic values which we provide.
So can you please check on this. Please reply me back for us to discuss further.
Thanking you in advance.
Regards,
Kris.S

Similar Messages

  • Purchase Requisition restriction at Material Type level

    Hi MM Guru's
    as per Client requirment
    we want to restrict the Purchase Requisition creation at Material type level (i.e system should raise the error messege when we try to create the PR against Finished Goods) is that possible
    if yes how can we restrict the PR ?
    Thanks in advance

    Hi,
    Please do the following setting in SPRO-LOgistics general-Materila master- Basin setings- DEfine attribute for materila type . Here select FERT as materila type and go to details and select tab
    Internal and external urchase orders and give zero -External POs not allowed.
    While creating PR for this materila type, system will issue error message.
    REgards
    Ram

  • How to create a Purchase Requisition for a material component in WBS or NW?

    Hello All,
    I have created a project with the following structure:
    Project Defination (Construction of Sub station)
          Main WBS
                   Level 1 WBS
                             Level 2 WBS
                                       Network for level 2 WBS
                                                      Activity  (Procuring Material)
                                                                 Material Component - MATXXX (Stock Item)
    Now in the above structure i have a activity where in i am procuring all the materails required to construct a Substation.
    So under this activity i have assigned all the materials which are needed to build Substaion.
    After i change the status of the project to release, there  a reservation created for the quantity of the material which i have mentioned in the material component under the activity.
    Now my querey is, how should i create a Purchase requisition for the reserved materail quantity in order to bring in the stock against the WBS / network / Project ?
    Awaiting your reply.
    Thanks and Regards,
    Sudarshan.

    Hi Sudarshan,
    In your case you can run Me5J to check the list of PR created against your project.
    Then Create PO and similarly you can check list of PO in Me2J.
    Then followed by GR and check if any GR release exist in MIGO. Then once after doing GR you can check the Material in Stock which will move material from Unrestricted stock to Project Stock which you can check it in MMBE.
    Then you can do the Good Issue in MIGO itself and run MIRO to complete the cycle.
    Regards'
    syed

  • Service purchase requisition/order with Material group optional

    Is it possible to create a purchase requisition/order with item category D (services) without entering any material group?
    We would like to enter only the G/L account but not the material group.

    Hi,
    It is not possible to create PR/PO without material / Service group & Item catagory D.
    Better create service groups like material group which will help you for reports also.
    Regards,
    Manish Jain

  • Purchase requisition with out material master - options

    Hi experts
    I wish to establish a control in Purchase requisition that, when the user enters item with out material master record (only enters text), system should give  a pop for decision options yes or no.
    Please let me know the userexit useful to map this while saving the document.
    regards
    marias

    Hi
    This userexit is specifically for Customers' Own Data in Purchase Requisition. we need to provide data. My scenario does not involve entry of new data and to verify the PR item data already entered.
    regards
    marias

  • Display purchase requisition for a material

    Hai...,
    can any one help me in developing a report to display purchase requisition based for perticular material number.
    tell me the tables and fields to  use..
    if possible sample code tooo....
    thanks in advance.

    Tables for Purchase Requsition.
    For Purchase Requisition
    EBAN Purchase Requisition
    EBKN Purchase Requisition Account Assignment
    EBUB - Index for Stock Transport Requisitions for Materi
    EINA - Purchasing Info Record: General Data
    EINE - Purchasing Info Record: Purchasing Organization D
    EIPA - Order Price History: Info Record
    EKAB - Release Documentation
    EKAN - Vendor Address: Purchasing Document
    EKBE - History per Purchasing Document
    EKBEH - Removed PO History Records
    EKBZ - History per Purchasing Document: Delivery Costs
    EKBZH - History per Purchasing Document: Delivery Costs
    EKEH - Scheduling Agreement Release Documentation
    EKEK - Header Data for Scheduling Agreement Releases
    EKES - Vendor Confirmations
    EKET - Scheduling Agreement Schedule Lines
    EKETH - Scheduling Agreement Schedules: History Tables
    EKKI - Purchasing Condition Index
    EKKN - Account Assignment in Purchasing Document
    EKKO - Purchasing Document Header
    EKPA - Partner Roles in Purchasing
    EKPB - "Material Provided" Item in Purchasing Document
    EKPO - Purchasing Document Item
    EKPV - Shipping-Specific Data on Stock Tfr. for Purch. D
    EKRS - ERS Procedure: Goods (Merchandise) Movements to b
    EKUB - Index for Stock Transport Orders for Material
    EORD - Purchasing Source List

  • Purchase of variant configuration material from external source

    Hi,
    I am working with variant configuration scenario , Here some material procured from external source and per characteristics requirements , these characteristics have varied price , these price should be maintain at condition level .
    The Material purchases from external source its price according to characteristic select.
    Pl helps me how these scenario resolve.

    H Rajesh,
    1.Create another New characteristic called ZPrice .Give the description and go directly to Addnl Data Tab.Here in the table name Enter "MMCOM" and in the Field Name Enter "VKOND" at CT04 & save .
    2.Now Goto CT04 in change mode, for Zprice Go to values tab and select RED &.Goto Extras-> Object Dependencies->Editor and then select Procedure & define condition.
    3. Goto Inforecord Choose Extras ->Variant conditions.
    Enter a variant key. Choose the desired condition type and specify the period during which the discounts and surcharges are to apply.
    Enter the amount and save.
    For More help please Refer Below SAP link
    [Variant Configuration |http://help.sap.com/saphelp_47x200/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm]
    Regards
    Pradeep
    Edited by: Pradeep Kumar on Mar 4, 2008 10:36 AM
    Edited by: Pradeep Kumar on Mar 4, 2008 10:37 AM

  • Material description in logon language at Purchase Requisition

    Hi firends,
    I am working an international company. Our manager is login system different language (DE) When I create a new Purchase Requisition (My logged language is TR) my PR document contain materials TR description. For release manager cann't understanda something from this PR because he logged to system DE and all PR material rows are have Turkish description.
    How can I fix this? Do you have any solutyion?
    Thanks
    Mehmet Avsar

    For example I want to buy 1234567 material
    TR : Malzeme
    EN : Material
    DE : das Material
    I have been sign in system TR language. And I am creating new Purchase Requisition. 1234567 material now in my requisition list. And it is looking 1234567 Malzeme
    My manager sign in system DE language. When he looking my requisition for approvment. He see my requisition list
    1234567 Malzeme
    But my manager want to see is 1234567 das Material.
    How can I do this?

  • Material not maintained by purchasing : error in purchase requisition

    Dear Experts ,
    I have created a new material of material type ZSPR where the purchasing view is already extended. I can see
    the purchasing view after selecting the plant in the material master. But when trying to add the line item in
    Purchase requisition for this material ,then i am getting message "Material xxxxxxxxxxxx not maintained by
    purchasing".
    when I go the material master & click on the purchasing view , message in bottom is shown with tick in green
    round background "No plant-specific data exists"
    I have created hundreds of materials in past 10 days , but this problem comes only for 3 to 4 materials.
    Kindly advise how to resolve.
    Thanks in advance.
    Regards,
    Anil Shanbhag

    Hi Anil,
    Good day.
    This problem occurs because there is no purchasing view plant specific i.e. you may be extended the purchasing view for some other plant.
    1. Go to MM01.
    2. Select Purchasing view.
    3. Enter appropriate plant.
    4. Enter relevant data & save.
    If this doesn't help revert back.
    Regards
    Anil

  • Delivery Date - Purchase Requisition from PM Order

    Hi All,
    For "normal" material added to the PM Order (on an Operation of Control Key PM01), the system picks up the Early Start Date from the Operation as the Delivery date of Purchase Requisition for the material. However, if a "service" is added to the PM Order (on an Operation of Control Key PM03), the system picks up the Early End Date from the Operation as the Delivery date of Purchase Requisition for the service. I'm not sure if the problem is being caused by the Control Key PM03 configuration or if it is being caused by something related to the "services" setup.
    Any Clues?
    Regards
    Pankaj.

    Hi,
    I think that you will find that it is the "scheduling" indicator on the control key that is doing this.
    In PM03 it is normally left unflagged and this means that these operations use a duration of 0 and so it assumes a start and end date of the previous operation end date.
    Try it in your "play" client and see if setting this flag sorts it out for you.
    Steve B

  • Create another purchase order for a material ordered in full

    Hello friends,
    I have a little MM question for you.
    I've created a purchase requisition with a material A and quantity 100 UN
    I've then created a purchase order in reference to this PR.
    This PO has been released.
    Is it possible, in standard SAP, to create another purchase order in reference to the same purchase requisition for the same material and the same quantitiy ?
    How does SAP control that ? (customizing path ??)
    Regards,
    Bahia.

    Dear,
    Is it possible, in standard SAP, to create another purchase order in reference to the same purchase requisition for the same material and the same quantitiy ?  Yes it is possible in SAP
    How does SAP control that ? (customizing path ??): SAP controls in that way, when ever you create purchase requisition with a material A and quantity 100 UN...Now PO created and released...
    Now again if you try to create PO wrt PR, you can observe this time you will get all deatils in PO without quantity...reason behind that is, you have already released an order for full qty w.r.t. that PR...So this time qty field will be empty..You have to manually enter this field.
    Now the same you can see in the the PR status in ME53N Tcode.
    Regards
    Utsav

  • Reqmt qty of variable size item in purchase requisition

    Hello All
    I am having a FG "A" & components "B" & "C" out of these two components "B" is variable size item with Base UOM as M, I have given two sizes of "B" as 3M & 2M in the BOM., i.e. material "B" is added two times as a component with variable size item.
    For 1SQM of A"  require 3M & 2M of "B" & 1KG of "C". When am having a reqmt of 10SQM of "A" the sys calculates the dependent reqmt correctly as 30M, 20M of "B" & 10KG of "C", but the purchase requisition of "B" is coming as of 50M.
    My problem here is that how the user would come to know how many qty of "B" is reqd of 3M &  2M length.
    Please throw some light on this behavior of the system. Looking forward to your valuable inputs & guidance.
    Regards,
    J K Tharwani

    jitendra,
    as i post in my earlier reply ,
    there is one work around which will work for you is that , use lead time offset ( with positive + or negative quantity of day ) in component detail screen for one of the position of B in the BOM so in that case you will have 2 different purchase requisition for B.
    Check it out and revert back , i am sure it will work for you.
    Only problem is the date will be delayed by one day or prepone by one day for the second position where B is assigned.
    other wise there for getting this information in PO , you need to go for Z development.
    for it you need to keep a check on specific plant , what are the purchase requisition that have material which are being used as variabble size item category in BOM and for this material you need to Pull values from Variable size field of Item, details screen.
    ROM1 and ROM2 and publish it in text of PR and PO.
    Check and revert back.
    Regards
    Ritesh

  • Purchase Requisition with mat-nr and without mat-nr

    Hi,
    if I create a Purchase Requisition with a material number it will be transfered into the EPRTRANS,
    but if I create a Purchase Requisition without a materialnumber (only with account assignment)
    then it will be not transfered into EPRTRANS .
    Do you have an idea why this strange behaivour happens.
    Maybe there must be made some changes in Function Module BBP_EPRTRANS_MAINTAIN ?
    Regards
    ilhan

    in order to perform a Purchase Requisition-Upload from R/3 Backend system into another system there
    are several steps necessary.
    When I am creating a Purchase Requisition at the Backend regarding a valid material-number,
    the Purchase Requisition will be automatically inserted into the table EPRTRANS.
    But not in case of if you create a Purchase Requisition without a Material-Numnber.
    e.g. Purchase Requisition with free text and account assignment.
    Function Module BBP_EPRTRANS_MAINTAIN is reposible for transfering of Purchase Requisition
    into table EPRTRANS.
    I need these PR in the EPRTRANS in order to perform the report BBP_EXTREQ_TRANSFER finally.
    It trnasfers all Purchase Requisition from EPRTTANS to the external system.
    I hope it clarifys some of the confusion .
    regds
    ertas

  • Query for MRP Purchase Requisition

    Hi Gurus,
    Currently system is creating Purchase requisition for BOM Material, which I don't want system should create PR for this material.
    I know MRP type ND but i need someother ways to stop it
    Appricate your response
    Thanks
    Sastry

    Hi,
    You can try the following option-
    1) Tcode - MM02-> MRP1 view - > Plant sp-matl status - 01 ( Blocked for procment/whse)
    2) Tcode - MM02-> MRP2 view - > Procurement type - Blank(No procurement)
    Sudarshan

  • Copy purchase requisition with me51n

    Hi,
    I have a problem when I want copy a purchase requisition in me51n.
    I have two documents types in specific and I use a variant of transaction who fixed the document type.
    I execute me51N
    I search a purchase requisition with other types.
    I do a drag & drop to copy the purchase requisition.
    But in the first copy, there is a document type present on header level was copied and in the second copy it is a document type comes from reference that is copied.
    I want for the first copy, the document type comes from reference in the copy.
    What am I doing ?
    Thanks.

    in order to perform a Purchase Requisition-Upload from R/3 Backend system into another system there
    are several steps necessary.
    When I am creating a Purchase Requisition at the Backend regarding a valid material-number,
    the Purchase Requisition will be automatically inserted into the table EPRTRANS.
    But not in case of if you create a Purchase Requisition without a Material-Numnber.
    e.g. Purchase Requisition with free text and account assignment.
    Function Module BBP_EPRTRANS_MAINTAIN is reposible for transfering of Purchase Requisition
    into table EPRTRANS.
    I need these PR in the EPRTRANS in order to perform the report BBP_EXTREQ_TRANSFER finally.
    It trnasfers all Purchase Requisition from EPRTTANS to the external system.
    I hope it clarifys some of the confusion .
    regds
    ertas

Maybe you are looking for