U00BFHow I can register two equals SID SAP Systems?

Hi,
I work in a SAP VAR, I've configured service desk scenario and other scenarios, I've registered some customers SAP Systems at SAP Solution Manager,
and all is OK. I've registered these SAP Systems using smsy transaction.
I've created a SAP System ECC 6.0 with SID=DES, this SAP System owns to Mercury Customer, I created this SAP System using smsy transaction and all is ok.
It's well registered at ib52 transaction. Now, I've other customer, name is Onix. Onix customer has SAP SAP System ECC 6.0 with SID=DES too.
So, when I try create this SAP System a pop-up error appears at transaction smsy: "System already exists. Change or enhance the system name". I attached a word file with screenshot pop-up error.
Please could you help me?
Thanks and Reagrds
Raul

Hi Raul,
Usually we follow a concept called SIDCID (SID: SID of the SAP system, CID: Customer ID), which allows unique identificaiton of systems with same SIDs.
Hope this will help you.
- Hari

Similar Messages

Can we connect to any SAP system if we have connection details.

Hi Experts,
Can we connect to any SAP system if we have connection details.
In this thread I found Diego Lombardini asking connection details.
Needed help on this report
I am working in ABAP for couple of years but donu2019t have much idea about connection to SAP system, Please let me know how it is possible .
High points will be rewarded for any helpful answer.
Regards
Bikas

Hi Bikas,
That reply is just because Diego got irritated by Ravi asking the same question in many threads many times .
Otherwise if a SAP server is not secureed using secureclient you can always connect to that SAP system using the internet and your own SAP GUI ( perhaps based on the GUI compatibility )
But i bet, nobody will reveal SAP server as open for you.
Cheers
Kothand

Same Program ID registered two times at SAP gateway

Hi Experts,
I Developed RFC to File scenario. In the sender rfc adapter i provided program id PID_SAP_ID. I used this program id in TCP/IP rfc destination.of r/3 system. I am running one report ZPM_SCHEDULE_OUTBOUND in r/3 to send data to XI. The problem is that, there are two instance of program id PID_SAP_ID registered in sap gateway because of this some times when I run the ZPM_SCHEDULE_OUTBOUND program, nothing is being passed to XI. What could possibly cause two instances of PID_SAP_ID program to run?
If anybody knows solution please let me know.
Thanks,
Venky

Hi Jakub Turminski ,
I am using that program id in one communication channel.
Thanks,
Venky

Can I view two documents side-by-side?

Can I view two documents side-by-side? Using Pages on iMac.
Thank you.

I guess my question was incomplete. You say, yes, I can view two documents side-by-side. How is that accomplished?
Thank you,

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Two solamn sap systems in One host ????

Experts,
Is it possible to install two solman 7.0 sap systems in single host.
Aleady i have installed solman 7.0/Ms sql 2005 in the Windows Host. I want to install another solman 7.0 in different SID in same the host for testing purpose.
(I installed ECC and CRM servers in the same host its works fine.)
PLease give your suggesstion
Thanks
Thirumal

Hi thirumal,
we can install two solman in one system through a concept called MCOD ie multiple components in one Database.
just as we can different SID's in one database.
for more information refer this site:
http://www.doag.org/pub/docs/sig/sap/2002/04/GeorgLeffers_SAP.ppt#550,29
Regards
Manjula.
u manjula on Aug 22, 2008 3:12 PM

Is there a way I can view two pages at once on Adobe for Windows 8 Metro?

I'm not talking about the one document. I'm talking about multiple documents. Say I need to view two documents at once, side-by-side while I study (one is a formula sheet and the other is a question sheet).

No. Adobe Reader Touch is a Windows Store app with "modern" UI. None of Windows Store apps with "modern" UI can open two windows side-by-side. That's the Windows 8/RT application design decision that Microsoft has made.
If you want multiple documents/windows for the same app, your only choice is to use a desktop app (e.g. Adobe Reader XI) in the Windows 8 desktop environment.

SAPConsole can address to 2 SAP System ?

Hello,
The possibility exists that can address SAPConsole to 2 SAP systems at once?
Or is always directed to a single SAP system?
Thanks,
Enrique.

Hi ,
If you are asking whether you can connect to two SAP systems with a single click on SAP logon pad then no. At any given point of time it will connect to only one SAP system, no matter even if there are two sap instances installed in the same server.
This is defined by the ip address and system number.
Regards,
Ravi.

Can PPDS be linked to non sap system which records production

Hi, We are currently planning with SNP and PPDS but for part of our business, the manufacturing execution occurs in a non sap black screen archaic system. Is there any way to consume PPDS planned orders with the data from an external Production recording system? Or is the only way to consume PPDS planned orders via using SAP R3/ECC?
I have dug through the MES PDF and the BAPIs and cant find a way to "consume" the PPDS planned orders without using SAP R3.
Thanks
j

Hi Lokesh,
There is no limitation to connect two non SAP Systems,PI will support to connect two differt non SAP Systems.
The reuirement you mentiioned bit not clear,what i understood is use JDBC Adapter at sender side and SOAP adapter at receiver side.How to use these adapters search in sdn you will find tons of documents.
Regards,
Raj

Registering Purchase information in SAP

Hi All,
I was working out on a scenario. I want to know what is the transaction code for registering purchase information in SAP system. And when a new purchase information is registered is there a standard program available which will generate report of registered purchased information?
Thanks
Rakesh

Hi Kushal,
Take the following example...
Product "A"
Price : Rs.100
Purchased Order created for 100 quantity: No Accounting Entry
GR done for 50 qty : Inventory A/c - Dr - 5000
                              GR/IR             Cr - 5000
IV done for 60 qty:   GR/IR    A/c -   Dr - 6000
                              Vendor A/c -   Cr - 6000.
To deal with the differences in Period-End, the relevant following transactions are...
MB5S : GR/IR Analysis
F.13 : GR/IR Clearing
MR11 : Maintain GR/IR Clearing Account...
Srikanth Munnaluri

Whether this function module K_DOCUMENT_UPDATE can send IDOC to Non SAP Sys

Hi,
I know function Module K_DOCUMENT_UPDATE can sent IDOC to R/3 systems.
1.Whether this function module can sent the IDOC to Non SAP System?.
2.How to make sure, that the function module can sent IDOC to Non SAP System?.
Please advise.Thanks.
Regards,
Dinesh

Hi Dinesh,
      Inside this function module K_DOCUMENT_UPDATE there is a FM available
CALL FUNCTION 'K_DOCUMENT_SEND'
       EXPORTING
            I_LOGSYS      = LOGSYSTEM
            I_COBK        = COBK
       TABLES
            T_COEP        = LT_COEP
            T_COEPL       = LT_COEPL
       EXCEPTIONS
             This FM is responsible to send IDOCs to the defined logical system LOGSYSTEM. No matter this logica; system is SAP or non-SAP IDOC will be sent. Prerequisite are,
1) RFC connection exist between system
2) Partner profile is configured between the system.
Regards
Ram

Register precalculation server as my company SAP system ?

Hello,
I need to provide WTS connection to our precalculation server for SAP support.
To configure that I need to register that host as SAP system (correct me if I'm wrong).
How should I do that ?
Standard SAP system registration includes generating license request, sending it to SAP and etc - this is simple windows host with precalc service running ?
thanks
Vilius

Hi,
May help you:----
establish a WTS connection for a new installed SAP system
Connection opening for SAP
About the STM tool~
Regards,
Suman

SAP System Message: Syntx error or generation error in a screen

dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
albert

hello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert

How to execute one sap gui script in different SAP system component versions.

Hi Experts,
I am having a task to write a script which can be executed in different SAP systems , explained as below.
I have created a script to do password reset for mass users in one system (TC6) & it's working fine. But when i load same script in other system(QR5) to do the same activity , the system unable to execute the same script.
One thing i found that by comparing in the two systems that the screen-ids in QR5 system is different than TC6 system.
My question
1-> why it is different even though the scripting language is same.
2-> How can i overcome it & make a common script for all the systems.
Please help me to resolve this.
Thanks in Advance,
Khagendra

Hi Holger & Stefan,
Sorry for late response first.
Now i have attached the recorded program-me for two systems for SU01 (simple user maintenance) with highlighted the text. I have highlighted both for easy understanding .
In system QR5 (upgraded one)
session.findById("wnd[0]").maximize
session.findById("wnd[0]/tbar[0]/okcd").text = "/nsu01"
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/ctxtSUID_ST_BNAME-BNAME").text = "test"
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/tbar[1]/btn[18]").press
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_LAST").text = "rest"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_LAST").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_LAST").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_FIRST").text = "user"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_FIRST").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_FIRST").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_COMM_DATA-SMTP_ADDR").text = "[email protected]"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_COMM_DATA-SMTP_ADDR").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_COMM_DATA-SMTP_ADDR").caretPosition = 21
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO").select
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/cmbSUID_ST_NODE_LOGONDATA-USTYP").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/cmbSUID_ST_NODE_LOGONDATA-USTYP").key = "A"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/pwdSUID_ST_NODE_PASSWORD_EXT-PASSWORD").text = "********"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/pwdSUID_ST_NODE_PASSWORD_EXT-PASSWORD2").text = "********"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/pwdSUID_ST_NODE_PASSWORD_EXT-PASSWORD2").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/pwdSUID_ST_NODE_PASSWORD_EXT-PASSWORD2").caretPosition = 9
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG").select
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUID_MAINTENANCE:1106/cntlG_ROLES_CONTAINER/shellcont/shell").modifyCell 0,"AGR_NAME","Z:T5_UK_WIPRO_DEV_NONBASIS"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUID_MAINTENANCE:1106/cntlG_ROLES_CONTAINER/shellcont/shell").currentCellColumn = "AGR_NAME"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUID_MAINTENANCE:1106/cntlG_ROLES_CONTAINER/shellcont/shell").pressEnter
session.findById("wnd[0]").sendVKey 11
In system DR0 (Not upgraded)
session.findById("wnd[0]").maximize
session.findById("wnd[0]/tbar[0]/okcd").text = "/nsu01"
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/ctxtUSR02-BNAME").text = "test"
session.findById("wnd[0]/usr/ctxtUSR02-BNAME").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/tbar[1]/btn[18]").press
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_LAST").text = "test"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_LAST").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_LAST").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_FIRST").text = "user"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_FIRST").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_FIRST").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtSZA5_D0700-SMTP_ADDR").text = "[email protected]"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtSZA5_D0700-SMTP_ADDR").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtSZA5_D0700-SMTP_ADDR").caretPosition = 21
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO").select
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/cmbUSLOGOND-USTYP").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/cmbUSLOGOND-USTYP").key = "A"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/pwdG_PASSWORD1").text = "********"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/pwdG_PASSWORD2").text = "********"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/pwdG_PASSWORD2").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/pwdG_PASSWORD2").caretPosition = 9
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG").select
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUU5:0106/tblSAPLSUU5TC_AGR/ctxtUSAGR-AGR_NAME[1,5]").text = "Z:T5_UK_WIPRO_DEV_NONBASIS"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUU5:0106/tblSAPLSUU5TC_AGR/ctxtUSAGR-AGR_NAME[1,5]").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUU5:0106/tblSAPLSUU5TC_AGR/ctxtUSAGR-AGR_NAME[1,5]").caretPosition = 26
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]").sendVKey 11
From the above it's clear that the screen IDs in both the systems are different as the program-me name is different for the same TA (SU01) in both the systems.
Now can you please advise how i will go with both to handle in one script (I can't put a check condition to call different scripts for the specific systems as in my landscape there are more that 100 systems).
Please help me on this.
Thanks in Advance,
Khagendra

How to implement for sap system use HADR

hi expert ，
       i am a newbie to sap basis， we have a requirement that do HA for our sap using HADR，i want know if there are some good sulotion for my scenario。
   our scenaro is we have two window 2008 sever host，one host has a sap system and we want the sap db2 database as a primary，and the other host also has a same the system which is restore from the previous sap system which we implement by system copy using database restore not migration。i want know as our secanrio could i achive SAP application HA by HADR，if we donu2018t have HA software like MSCS。whether we must manual monitor the primary sap   when it stop because any issue like hardware failed and then manual start the other sap system in the other host？
our two sap system have different sap profile beacause the hostname are different.
our aim is when one of our host can't use we can immediate start the other sap system in the other host, the less the change the better the solution .
is it possible?
thanx very much,
best regards.

hi paul ,
    thanx for your information，i have already read the inforamtion about sg247363 once-over and SAMP。 but unfortunately we have a different situation，we only have two windows servers and must installed windows server 2008 OS because some reasons。we also don't have have other host to install sap。as this situation，how could we implement HA beacuse we also don't have shared disk。the window server are isolation。
i also read some pdf which download from sdn ， in the book the HA is implemneted as the sap application has a separate host and has two host for DB2 database using HADR，the HA is rely the cluster software 。in this situation the sap application also need HA to avoid single point failure。
    as the limited i have said above， is it possible to do HA by MSCS ，can any body tell me if the MSCS is free to install in OS windows 2008？ if we can't use it free，have any other solution？in the worst ， we must manual monitor the application and when a sap application or database can't work ，we want to restart the other sap which in the other host，we need the database synchronization between two database which using HADR。is it possible ？if it do， whether there are some additional setup for sap application because the two sap application have different sap profile name（a sap is a system copy from the other by database restore）。
    any reply will be appreciated。

U00BFHow I can register two equals SID SAP Systems?

Similar Messages

Maybe you are looking for