U100 Key Swap BIOS Request
I tried following instructions, I searched for an hour and could find no links, went to BIOS section and followed link to U100, instructions said to post request for download link, but the U100 thread was closed on 25 March.
May I please have a link to download modded BIOS for U100 to swap the CTRL and FN keys? Thanks.
Well what's the price? Since this is a "voluntary donation" I need to know what the cost is please....
Quote from: Svet on 11-May-10, 21:50:28
Hello,
The request can be proceed on donation https://forum-en.msi.com/index.php?topic=134259.0
Once done, the request will be e-mailed to you.
Best Wishes,
Svet
Similar Messages
-
Request for GX 633 fn key swap with left ctrl
Hi Svet,
Request for GX 633 fn key swap with left Ctrl please
Mainboard : Gx630/GX633
PCB Version : Ver.001
BIOS Version : E1652NMS VER.10P
BIOS Date : 12/02/2009
EC Version : 1652EMS1 Ver1.16 11/27/2009
thank youQuote from: RudiAk on 01-January-10, 03:45:24
Hi Svet,
Request for GX 633 fn key swap with left Ctrl please
Mainboard : Gx630/GX633
PCB Version : Ver.001
BIOS Version : E1652NMS VER.10P
BIOS Date : 12/02/2009
EC Version : 1652EMS1 Ver1.16 11/27/2009
thank you
Quote from: RudiAk on 05-January-10, 19:38:51
Hi Svet,
Anything on my request please?
Thank you
Done, check your e-mail -
Request: GX640 Fn and Ctrl Key Swap
Hi,
I'd like to request a Fn/Ctrl key swap for the GX640.
Bios Information:
BIOS Version: E1656IMS.106
BIOS Build: 02/12/2010 11:06:43
EC Version:1656EMS1 Ver4.06
EC Build: 12/15/2009
ThanksQuote from: Pherein on 24-March-11, 12:56:03
Hmm trying to flash the bios now but it's being stuck on the screen in the images linked to this post for about 15 minutes :S Have I bricked it? What should I do?
http://img858.imageshack.us/i/dscf4542.jpg/
http://img29.imageshack.us/i/dscf4543k.jpg/
Quote from: Pherein on 24-March-11, 19:46:50
I performed a hard-reset and the computer still worked fine, it seems the flashing process never started. I noticed I had the USB stick plugged into the USB/eSata combo port...wonder if that made a difference. I'll try flashing again using a regular usb port.
Edit: This flash worked perfectly ) Don't know what happened the first time...
Thanks,
Pherein
well done
the lockup behaviour exactly as described can hapends in very rare cases in ratio 1/100,
its hapends to me think around 4-6 times [from 500 ec updates one after another in a loop],
and in some very rare cases the EnE flasher hangs at startup and FAN spinup @100% and do nothing,
i suspect ec unable to enter in reset mode or its some kind of the EnE flasher bugs,[too small delay to wait the EC for reply]
but its not dangerous, etc: do not contain deadly properties. -
Swapping of request through prompt selection
Hi!
can i swap the request with the help of propmt? My requirment is, in dashbord i have to give prompt selection and according to the prompt valve my request should be changed ,how can i achive it?
thanks
DeepakLink????
That article will not talk about link..
it just displays the requests it self that you added in the dashboard sections, but depends on the prompt value you select the guided navigation properties are changes and will hide that particular section and will only show the section where the condition you specify is met...
Hope you are clear..
if not.. give clear idea what you want exactly? -
We have a simple update statement to Oracle 11g Database. When running the statement the data is not getting updated and we are getting an error "Auto-generated keys were not requested, or the SQL was not a simple INSERT statement. ErrorCode=0 SQLState=HY000". We found this error by dumping the SQL to a file.
But most other Update statements are working fine.
Also, the same statment works for Oracle 10g and Coldfusion 9.0.0.
Any idea if this is a problem with Coldfusion or Oracle? Is there any resolution.
I found the CF 8 had a similar issue and was fixed in a hotfix (http://helpx.adobe.com/coldfusion/kb/error-auto-generated-keys-requested.html).Hi,
Thanks. I compiled my code using JDeveloper 10.1.2, didn't dare to use the latest. It works in 10g apps server. When I deployed to 9ias apps server, those weird errors showed up. Unfornately, our dev environment is at a newer version than the production one.
So, you think the error is generated because I referenced some newer technologies that was not provided by 9ias?
Jia -
Generation of 1024 bits key certificate signing request-sun one app srvr 7
Kindly help to generate 1024 bits key certificate signing request in sun one application server 7. The problem faced by me is that during csr generation the key lengh is 512 as this is the default value.Now i would like to change this default value and would like to generate a key with length 1024.Kindly help me.
Thanks in advance
Vishnu PriyanOK, post a new Topic, title it Need help with self-signed certificate
Before you post, search the forums for the problem. Do the footwork.
Then, take your time, post exactly which of these steps you have taken, what the results were, and exactly where you are having problems, what the exact problem is (error message, whatever).
You are going to have much better response if someone can easily figure out what the problem you are having is. If you look at this thread, you will see "I have tried these 10 steps and they don't work". You are going to get nowhere with that.
I have to sleep now, good luck. -
GOP /UEFI bios request for GTX N770 TF 2GD5/OC
Symptoms: System will not POST after ASUS Z9PE-D8 WD mobo update to latest BIOS. Worked fine previous. System will POST and run fine with other graphics cards.
The card will POST and run fine in ASUS MAXIMUS V GENE mobo with not current bios. With which I have pulled GPU-Z info as required for a BIOS request.
Prompt response greatly appreciated! There is work I need to be doing! Thank you so much.
S/N: 602-v282-220B1308092571
NVIDIA Firmware Update Utility (Version 5.141)
Adapter: GeForce GTX 770 (10DE,1184,1462,2825) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1112 bytes
IFR CRC32 : 189B4216
IFR Image Size : 1536 bytes
IFR Image CRC32 : 4552879D
IFR Subsystem ID : 1462-2825
Image Size : 99328 bytes
Version : 80.04.C3.00.21
~CRC32 : D6321A32
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20050000
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 770
Board ID : E12D
PCI ID : 10DE-1184
Subsystem ID : 1462-2825
Hierarchy ID : Normal Board
Chip SKU : 425-0
Project : 2005-0000
CDP : N/A
Build Date : 06/03/13
Modification Date : 06/18/13
UEFI Support : No
UEFI Version : N/A
UEFI Signer(s) : Unsigned
Board: Asus Z9PE-D8 WS
Bios: Version 5206
VGA: MSI GTX 770 2GB/OC
PSU: Corsair TX750
CPU: Intel Core E5-2687W Default CPU settings, no OC
MEM: Crucial 2133Mhz 16GB
HDD: Kingston HyperX 250GB SSD
COOLER: Thermaltake
OS: Windows 7 64x Pro
Sign-On Message : GK104 P2005 SKU 0000 VGA BIOS
MSINV282MS.352Quote from: flobelix on 19-November-13, 16:07:12
Don't bump your posts: >>Please read and comply with the Forum Rules.<<
I guess you mean ASUS Z9PE-D8 WS and not WD. That is a dual cpu socket XEON workstation board not meant for gaming (hardware). The NV282MS.352 vbios the vga uses is a current one. Contact Asus and report the compatibility issue and maybe they can help you with.
My use of my system is video editing. It uses gpu heavily for encoding. Hence, the hot GFX card I just purchased. I have been in contact several times with Asus, since they also produce an N770 card, and they do not have any known compatibility issues with their own products, at least. The card worked perfectly with this N770 card when it had the previous BIOS. It was when I upped the BIOS to the latest version that I had the issue. Other GFX cards do work. The N770 wont finish POST. 100% fail. I ended up purchaseing a new BIOS chip with the previous bios flashed, since they could not produce a procedure for me to downgrade. However, I will not be able to use new CPUs with the later micro-codes until I find a way to update the BIOS. Otherwise, I would be FD&H with the old one.
Thanks for the reply,
Rod -
UEFI Bios Request for MSI Twin Frozr III HD 7950 O/C Non Boost card, has 7970pcb
Its this one Version: 015.020.000.000.001083 You make this forum far to complicated to navigate for old people , could not figure out how to insert an image, and you can't post external links either. So i linked the bios version, great cards by the way i have two of them, purchased a new motherboard that supports UEFI so I wanted to try. Thanks. More info:
GPU Device Id: 0x1002 0x679A
113-C3861300-X01 113-MSITV277MS.202 TAHITI B0 PROH C38613 GDDR5
3GB 500E/150M
(C) 1988-2010, Advanced Micro Devices, Inc.
ATOMBIOSBK-AMD VER015.020.000.000.001083
C3861300.101 PowerTune Limit: 175 to 260
CCC Overdrive Limits
GPU Clock: 1100.00 MHz
Memory Clock: 1575.00 MHz
Clock State 0 Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Boot Clock State 1
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Optimal Perf Clock State 2
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: UVD Clock State 3
Core Clk: 300.00 MHz
Memory Clk: 150.00 MHz Flags:S/n : 602-v277-05sb1205073711 first card S/n 602-v277-05sb1206017147 for Msi Twin Frozr III Hd 7950 o/c regarding UEFI bios request.
-
"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
S/N: 602-V277-310B1407096530
Installed BIOS: TV277MS.3A0
Hi,
I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
I have to use "Legacy" mode because of my PC does not start otherwise.
Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
Thank you.here is .3A1
TV277MS.3A1 legacy
TV277MH.3A1 uefi
flash guide:
Quote
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
Rename TVxxxxx.zzz to zzz.rom.
Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios. -
BIOS Request for G580 Model 2189 Windows 7 x64
Hello, could someone please provide an original BIOS for G580 Model 2189 x64 Windows 7? Thank you!
Not to difficult to find... Why the "original" BIOS request? Usually not a good idea to backstep BIOS unless directed to by support professionals. Also, BIOS updates are independant of Windows Versions, the installer or "flashing": program used to install the BIOS file is sometimes Windows version dependant.
Either way - check this page for BIOS files: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
Good luck. -
Need GX740 Fn+Ctrl swap BIOS
Hi there,
I need the fn + Ctrl key swap for the GX740 - can you do this for a donation?
ThanksCheers Svet - got it and it works like a Boss!
-
Access key invalid for request
How can I resolve this exception?
Servlet failed with Exception
java.lang.IllegalArgumentException: Access key invalid for request
at com.bea.wcp.diameter.sh.ShSession.createRequest(ShSession.java:40)
at com.bea.wcp.diameter.sh.ShSession.createPUR(ShSession.java:26)
at com.bea.wcp.diameter.sh.ShApplication.putDocument(ShApplication.java:147)
at com.bea.wcp.diameter.sh.WlssShApplication.putDocument(WlssShApplication.java:79)
at com.bea.wcp.profile.ShProviderDirect.putDocument(ShProviderDirect.java:63)
Truncated. see log file for complete stacktraceHello David,
Could you please post the entire exception trace here?
Also, is this related to your post :
http://forums.bea.com/thread.jspa?threadID=300005777
If so, could you point to the link from where you are trying this example?
Another thing to try would be invoking this sample using a SIP message instead of http. I see from the other trace that the putDocument is being invoked from a http context.
thanks,
Mihir -
MSI GT70 0NC FAN always 100% (Unblocked Bios Request?)
Hello, I have a problem with my GT70 CPU Fan.
It keeps running at full speed since I use the Internal GPU because my graphic card is dead and removed.
I have found few similars topics that always ended up by unblocked bios request so I tried to update with the latest versions available on the website but it didnt solve the problem.
My current settings are
EC: 1762EMS1 ver4.14
BIOS: E1762IMS.10U
Running on Win 7 64b
The link for my exact same problem : https://forum-en.msi.com/index.php?topic=254778.0
Thanks in advanceyes, i can start work on it once donation is received: https://forum-en.msi.com/index.php?topic=134259.0
and to send it back to you when its done 3-4 hours later -
UEFI bios request for N780 TF 3GD5/OC
UEFI bios request for N780 TF 3GD5/OC
S/N: 602-V298-010B1308089788
ROM: 80.10.37.00.15 (P2083-0020)Quote from: Marski69 on 14-May-14, 01:44:02
Hi Svet
Any chance that my Bios is the same?
And i can use it?
Can i post my Bios.rom?
Tnx for reply!
Em, we don't have a second sight... You need to at least supply some info on your card namely S/N and a copy of your vbios saved to file (that you uploaded to some file hoster and added link here). -
Custom BIOS request: GT60-20C - swap Fn and Windows key
Hi. Just got myself a brand new GT60-20C, and the lack of a left Windows key is driving me nuts. Sounds like you can mod a BIOS that would swap the left Fn and right Windows keys. If you can do that, I'd greatly appreciate it.
System details:
Mainboard: MS-16F4
Mainboard version: REV:0.C
BIOS version: E16F4IMS.506
BIOS date: 05/22/2013
Please let me know if there's anything else you need to do this.
Thanks!oki, i can start work over it once donation is received: https://forum-en.msi.com/index.php?topic=134259.0
and will send back to you when its done
EDIT: Received it, working on it
Maybe you are looking for
-
greetings, this may be a stupid question, but is it possible to access the mac half of your drive whilst in the bootcamp/windows side? I ask this because i was silly and didnt make the partition big enough (why waste it to windows junk right?) But i'
-
Hi, I have a Z-report which needs to call some bapi in APO and pass the data retrieved in R/3 to APO Bapi ....whats the way out? bapi to be called in R/3 is BAPI_POSRVAPS_GETLIST3... and need to fill my internal table with the data retrieved from thi
-
How to Enable firewall on Solaris 10 SPARC Machine?
Hi All, I have installed Solaris 10 SPARC & by default the firewall is disabled. Now i need to enable firewall? Can i know how to enable firewall Solaris 10 SPARC Machine? Also can i know how to open up specific TCP & UDP ports?
-
How to customise the URL on endsession button and point it to a third-party Application?
Hello , I have a scenario where i want to redirect to a third-party application instead of OPA summary screen on hitting the close-->end session button. How to customize the URL behind the end session button to point to the third-party URL? Thanks, C
-
Waveform with time stamps randomly separated
Folks, I'd like to get your advice on the following task. A spectrometer takes data at arbitrary, not foreseeable instants. To each new point a time stamp is attached. The data shall be displayed in a waveform graph with the data coordinate on the y-