U2 20G is getting a weird error

It has been acting up today so I brought it home to "restore." It is now telling me after i hit the "restore" key that "There was a problem downloading iPod software to the iPod. The requested resource was not found." Click on OK and nothing happens. I think I may have toasted a hard drive because I was getting an error message on the iPod earlier with the dreaded unhappy iPod graphic. Thought?
Dell Windows XP Pro

Did you read this to see if it helped?
Good luck

Similar Messages

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Getting this weird error

# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d03b7cd, pid=2752, tid=2804
# Java VM: Java HotSpot(TM) Client VM (11.0-b12 mixed mode, sharing windows-x86)
# Problematic frame:
# C [awt.dll+0x3b7cd]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x02ee4400): JavaThread "AWT-Windows" daemon [_thread_in_native, id=2804, stack(0x03220000,0x03270000)]
siginfo: ExceptionCode=0xc0000005, writing address 0xe1fe8c80
Registers:
EAX=0x17e4d6c4, EBX=0x00000bf4, ECX=0x00000100, EDX=0xe1fe8c80
ESP=0x0326f3a4, EBP=0x00000400, ESI=0x17e4d6c4, EDI=0xe1fe8c80
EIP=0x6d03b7cd, EFLAGS=0x00010206
Top of Stack: (sp=0x0326f3a4)
0x0326f3a4: 0326f47c 00000100 0326f484 00000100
0x0326f3b4: 6d0a462a 00000400 00000400 00000100
0x0326f3c4: 00000100 0326f600 0326f400 00000000
0x0326f3d4: 00000000 00000100 02be8828 00000100
0x0326f3e4: 00000400 e1fe8c80 0010e4c0 00000000
0x0326f3f4: 00000000 00000100 00000100 00000000
0x0326f404: 00000000 00000100 00000100 00000000
0x0326f414: 00000000 00000004 00000400 00000000
Instructions: (pc=0x6d03b7cd)
0x6d03b7bd: 00 00 00 8b 4c 24 14 8b e9 c1 e9 02 8b f0 8b fa
0x6d03b7cd: f3 a5 8b cd 83 e1 03 f3 a4 8b 74 24 18 8b 4c 24
Stack: [0x03220000,0x03270000], sp=0x0326f3a4, free space=316k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [awt.dll+0x3b7cd]
[error occurred during error reporting (printing native stack), id 0xc0000005]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.awt.windows.WToolkit.eventLoop()V+0
j sun.awt.windows.WToolkit.run()V+69
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02f00400 JavaThread "Thread-6" daemon [_thread_blocked, id=4036, stack(0x04050000,0x040a0000)]
0x02fd5c00 JavaThread "Thread-5" daemon [_thread_blocked, id=3692, stack(0x03990000,0x039e0000)]
0x02fe7c00 JavaThread "Thread-4" daemon [_thread_in_native, id=2840, stack(0x03940000,0x03990000)]
0x02fcb000 JavaThread "Thread-3" daemon [_thread_blocked, id=2820, stack(0x038f0000,0x03940000)]
0x02fa8000 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=2000, stack(0x03870000,0x038c0000)]
0x00396400 JavaThread "DestroyJavaVM" [_thread_blocked, id=2360, stack(0x003b0000,0x00400000)]
0x02f6d800 JavaThread "TimerQueue" daemon [_thread_blocked, id=2228, stack(0x03670000,0x036c0000)]
0x02f6ac00 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=580, stack(0x03620000,0x03670000)]
=>0x02ee4400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=2804, stack(0x03220000,0x03270000)]
0x02ec7000 JavaThread "AWT-Shutdown" [_thread_blocked, id=3564, stack(0x031d0000,0x03220000)]
0x02e94000 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1264, stack(0x03180000,0x031d0000)]
0x02e9e400 JavaThread "EventQueue" daemon [_thread_blocked, id=728, stack(0x030e0000,0x03130000)]
0x02b21400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2384, stack(0x02dd0000,0x02e20000)]
0x02b1b000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1532, stack(0x02d80000,0x02dd0000)]
0x02b19800 JavaThread "Attach Listener" daemon [_thread_blocked, id=3844, stack(0x02d30000,0x02d80000)]
0x02b18400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3968, stack(0x02ce0000,0x02d30000)]
0x02b13400 JavaThread "Finalizer" daemon [_thread_blocked, id=2356, stack(0x02c90000,0x02ce0000)]
0x02b0ec00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2644, stack(0x02c40000,0x02c90000)]
Other Threads:
0x02b0d000 VMThread [stack: 0x02bf0000,0x02c40000] [id=1772]
0x02b23400 WatcherThread [stack: 0x02e20000,0x02e70000] [id=2316]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 960K, used 761K [0x16960000, 0x16a60000, 0x17d10000)
eden space 896K, 77% used [0x16960000, 0x16a0e630, 0x16a40000)
from space 64K, 99% used [0x16a40000, 0x16a4fff8, 0x16a50000)
to space 64K, 0% used [0x16a50000, 0x16a50000, 0x16a60000)
tenured generation total 11972K, used 8697K [0x17d10000, 0x188c1000, 0x26960000)
the space 11972K, 72% used [0x17d10000, 0x1858e578, 0x1858e600, 0x188c1000)
compacting perm gen total 12288K, used 5163K [0x26960000, 0x27560000, 0x2a960000)
the space 12288K, 42% used [0x26960000, 0x26e6afd8, 0x26e6b000, 0x27560000)
ro space 8192K, 63% used [0x2a960000, 0x2ae6bdf8, 0x2ae6be00, 0x2b160000)
rw space 12288K, 52% used [0x2b160000, 0x2b7ba3c8, 0x2b7ba400, 0x2bd60000)
Dynamic libraries:
0x00400000 - 0x00424000      C:\WINDOWS\system32\javaw.exe
0x7c900000 - 0x7c9b5000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c900000      C:\WINDOWS\system32\kernel32.dll
0x77f40000 - 0x77feb000      C:\WINDOWS\system32\ADVAPI32.dll
0x77da0000 - 0x77e32000      C:\WINDOWS\system32\RPCRT4.dll
0x77f10000 - 0x77f21000      C:\WINDOWS\system32\Secur32.dll
0x7e390000 - 0x7e421000      C:\WINDOWS\system32\USER32.dll
0x77e40000 - 0x77e89000      C:\WINDOWS\system32\GDI32.dll
0x76330000 - 0x7634d000      C:\WINDOWS\system32\IMM32.DLL
0x7c340000 - 0x7c396000      C:\Program Files\Java\jre6\bin\msvcr71.dll
0x6d800000 - 0x6da56000      C:\Program Files\Java\jre6\bin\client\jvm.dll
0x76af0000 - 0x76b1e000      C:\WINDOWS\system32\WINMM.dll
0x6d280000 - 0x6d288000      C:\Program Files\Java\jre6\bin\hpi.dll
0x76bb0000 - 0x76bbb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d7b0000 - 0x6d7bc000      C:\Program Files\Java\jre6\bin\verify.dll
0x6d320000 - 0x6d33f000      C:\Program Files\Java\jre6\bin\java.dll
0x6d7f0000 - 0x6d7ff000      C:\Program Files\Java\jre6\bin\zip.dll
0x6d000000 - 0x6d136000      C:\Program Files\Java\jre6\bin\awt.dll
0x72f70000 - 0x72f96000      C:\WINDOWS\system32\WINSPOOL.DRV
0x77be0000 - 0x77c38000      C:\WINDOWS\system32\msvcrt.dll
0x774a0000 - 0x775dd000      C:\WINDOWS\system32\ole32.dll
0x5b190000 - 0x5b1c8000      C:\WINDOWS\system32\uxtheme.dll
0x6d220000 - 0x6d274000      C:\Program Files\Java\jre6\bin\fontmanager.dll
0x10000000 - 0x10171000      C:\WINDOWS\system32\nview.dll
0x77e90000 - 0x77f06000      C:\WINDOWS\system32\SHLWAPI.dll
0x7c9c0000 - 0x7d1e2000      C:\WINDOWS\system32\SHELL32.dll
0x770e0000 - 0x7716b000      C:\WINDOWS\system32\OLEAUT32.dll
0x5d4e0000 - 0x5d57a000      C:\WINDOWS\system32\COMCTL32.dll
0x77bd0000 - 0x77bd8000      C:\WINDOWS\system32\VERSION.dll
0x77390000 - 0x77493000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\comctl32.dll
0x77650000 - 0x77671000      C:\WINDOWS\system32\NTMARTA.DLL
0x71b80000 - 0x71b93000      C:\WINDOWS\system32\SAMLIB.dll
0x76f20000 - 0x76f4d000      C:\WINDOWS\system32\WLDAP32.dll
0x03380000 - 0x033ce000      C:\WINDOWS\system32\NVWRSNL.DLL
0x746a0000 - 0x746ec000      C:\WINDOWS\system32\MSCTF.dll
0x03410000 - 0x0346d000      C:\Program Files\Actual Window Minimizer\awmemb.dll
0x75250000 - 0x7527e000      C:\WINDOWS\system32\msctfime.ime
0x4fd10000 - 0x4feb6000      C:\WINDOWS\system32\d3d9.dll
0x6deb0000 - 0x6deb6000      C:\WINDOWS\system32\d3d8thk.dll
0x6d610000 - 0x6d623000      C:\Program Files\Java\jre6\bin\net.dll
0x71a30000 - 0x71a47000      C:\WINDOWS\system32\WS2_32.dll
0x71a20000 - 0x71a28000      C:\WINDOWS\system32\WS2HELP.dll
0x6d630000 - 0x6d639000      C:\Program Files\Java\jre6\bin\nio.dll
0x036d0000 - 0x036e5000      C:\WINDOWS\system32\nvwddi.dll
0x719d0000 - 0x71a10000      C:\WINDOWS\System32\mswsock.dll
0x76ee0000 - 0x76f07000      C:\WINDOWS\system32\DNSAPI.dll
0x76f70000 - 0x76f78000      C:\WINDOWS\System32\winrnr.dll
0x16080000 - 0x160a5000      C:\Program Files\Bonjour\mdnsNSP.dll
0x76d20000 - 0x76d39000      C:\WINDOWS\system32\Iphlpapi.dll
0x76f80000 - 0x76f86000      C:\WINDOWS\system32\rasadhlp.dll
0x61200000 - 0x61259000      C:\WINDOWS\system32\hnetcfg.dll
0x71a10000 - 0x71a18000      C:\WINDOWS\System32\wshtcpip.dll
VM Arguments:
jvm_args: -Xmx256m
java_command: com.speljohan.rsbot.Application GUIController nonmembers
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\TortoiseSVN\bin;C:\Program Files\QuickTime\QTSystem\
USERNAME=gavin van der star
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 4, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 2 (2 cores per cpu, 1 threads per core) family 15 model 6 stepping 4, cmov, cx8, fxsr, mmx, sse, sse2, sse3
Memory: 4k page, physical 2095532k(1209308k free), swap 4032792k(3244508k free)
vm_info: Java HotSpot(TM) Client VM (11.0-b12) for windows-x86 JRE (1.6.0_10-beta-b25), built on May 29 2008 00:51:46 by "java_re" with MS VC++ 7.1
time: Thu Nov 20 17:54:40 2008
elapsed time: 9 seconds

prakashdewangan wrote:
This is not a weird error... This is Java HotSpot... It comes when java is unable to continue run and it has to Exit. Like in windows you would have seen error box when program terminates.
The posted trace is from a windows box.
Java HotSpot generely I have seen because of Too High CPU usage (and memory too). Java does not get enough resource to run... Please check your code where is the Loop which needs high resource... try to refactor that code...No.
Standard general causes of this.
- Use of JNI or a third party library that uses JNI
- A combination of video drivers, video card and fonts. This one is less prevalent than it used to be.
- Bad environment, memory, installs, programs, etc.
- Bug in the VM.
Presuming in your reported case that none of the other causes applied then you found a bug in the VM. That doesn't mean that anyone else found the same one.

Keep getting a weird error message in AE CS4

I keep getting this error message concerning a few of the files in my Project bin:
I get this message multiple times when I open this particular project and repeatedly click "OK" until the project finishes opening up. The result is missing files. When I go to replace the file with the proper file which it already should be anyways it pops up this error message on me again. What does this mean and why are my files not able to be in AE? Sometimes they are and sometimes not.
I can drag the same file into the project bin and it will work fine (but I have to go through the trouble of putting it back in the correct spot in the layer stacking order in my compositions that use this particular file).

Hi, still having this problem. What's weird is it's intermittent. I'll go to open the project one day from the same drive hooked up the same way and it will work and then the next day, without even having imported anything into the project the previous day, it will give me the error and I'm screwed because there's so many files that are "missing". I tried renaming a long file name with only 10 characters in the finder and then replacing the file in AE and when I hit OK it gave me the same exact error message.

When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.

This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformat

Hey donovanjj,
Thanks for the question. Let’s try to recreate your SC Info folder:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
If the above does not resolve your issue, you may want to look over the following resources:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thanks,
Matt M.

I get a weird error message when I boot up the computer

Every once in a while when I boot up my computer it gives me an error message that says:
"Your computer’s clock is set to a date before March 24th 2001. This may cause some applications to behave erratically."
But my clock is not set to an old date/time. And when I go into the date/time settings to check, they are always set correctly. Why am I getting this message??

it could be logic board problem (just a guess at this point and not a conclusion), unless some software setting changes date/time as was suggested.
logic board is the main electronic board inside, containing processor, video chip etc., it also includes the chip controlling real time and date.
it is possible that the time chip is failing for some reason and it can't be replaced on it's own - the whole board may need to be replaced.
if the iBook is out of warranty it will be to expensive and probably not worthwhile just for the clock problem.
if it's in warranty (1 year from purchase date or 3 years with AppleCare warranty) any authorized service provider will get it fixed:
http://www.apple.com/buy/locator/service.html
you can look up the warranty here by entering serial number for the iBook where it says "About Your Support Coverage":
http://www.apple.com/support/
also someone may have other suggestions on software causes.

Should I reformat my mac? Getting a weird error.

First of all, my 2012 15" rMBP on Yosemite 10.10.3 runs perfectly fine. I have very small issues here and there but it's rare. Every few months I do repair disk permissions and do a verify disk thing using the disk utility though. I don't remember the last time I actually verified the disk itself, maybe a year or so ago. Anyways, today during my rare check up, it said that I in fact did need to repair the disk, and I needed to restart the computer and go into the disk utility during the restart. Easy enough!
Well, upon running that process for a few minutes, I get this error...
Once again, my mac runs perfectly fine right now. Haven't had any issues. I backed it all up today too so I do have a very recent backup. Is it worth me reformatting the disk and restoring my files if I'm not having issues? Does this error somehow spell doom for my mac or something? Rather confused that it's asking me to perform such a serious task considering things are running well and have been for a while.
Or should I just make sure I make backups pretty regularly and wait for something to actually happen before I reformat?

Eventually, they may. Do as instructed. Backup the drive. Boot from the Recovery HD:
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.
This should install the version of OS X that you had installed. You can restore your data from the backup.

I'm getting a weird error message:

I just installed zonelabs antivirus, and ever since then I get this error message when I try to open iTunes:
The iTunes Music Library.itl file is locked, on a locked disk, or you do not have write permission for this file.
I've set the user priviledges to high for my login, and it still doesn't do anything. Help!

If you disable zonelabs software, does iTunes run OK?
There has to be a way to tell that software not to scan or lock anything in the iTunes folder. But, I don't have that software....best to check on their website, maybe.
Tell it to leave this folder alone
C:\Documents and Settings\username\My Documents\My Music\iTunes

When left clicking a prompt that would allow me to download something, I get a weird error.

Not sure how this happened, but when I left click a link that normally bring up a prompt to download/save something, I get this:
C:\Use>@ᰬÏjlᱬÏ׈Ï could not be saved, because an unknown error occurred.

This looks like a codec issue. Try this add on [https://addons.mozilla.org/en-US/firefox/addon/quick-media-codec/]

Getting a weird error in Report Writer Report(ABAP Reporting tool)

Hi Guys,
If anybody has worked on Report Writer Report.Can you help me in this regards?
There is a peculiar problem for the (Column block) .In the Column block there are 3 key figures(Quantity,Local Currency and Group Currency).
Of these in the output of the Report Writer Report the Quantity Column is not getting summed up properly.Though the other 2 columns(Local Currency and Group Currency)are reflecting the proper summed up data.
According to the tables, all of them are reflecting the accurate data.But only for the Quantity column though its reflecting the actual data,but the summation for it is not reflecting the correct data.
Can anybody tell me if we can attach screen-shots for Questions posted in Forums?
Please help me in this regards.

Hi James,
Thank you for your quick response.
I checked the report and the remainder functions is not being used.
The only formulas being used in the report are the following.
UpperCase ([1])
+ ", " + - This is set to @name
{@name} + " (" + + ")"
There are some formatting formulas set on the above values, but other than that, there is a sql query and the "select distinct rows" and "perform grouping on server" is selected.
Thanks,
Jayashree

Trying to generate a form twice and get a weird error message

Hi,
I installed the last version of Designer and Oracle Database 10G on my computer. Everything seems to be fine. The next thing I did was to unlock the HR schema in the database and capture it in Designer.
Now I "design" a simple form to display the table REGIONS. If I generate the form, it works fine (I have few warnings). But if I try to generate again, I got the following message:
Form Generator : Version 10.1.2.0.2 (Build 10.1.2.6.18) - Production on Mon Nov 09 15:02:12 2009
Copyright (c) 1995, 2005 Oracle Corporation. All rights reserved
Generating Module 'MODULE_01' (1 of 1)
An internal error has occurred, context and traceback follows...
Last CV function: cvfqgv
Last CV object: Module MODULE_01
Current preference object: Module MODULE_01
Last function recorded: cgen45() :633
Repos container name: HR
Repos module name: MODULE_01
Generation Complete
Also, if I close Designer and go back in and try to generate, the form is generated without errors.
So I would like to know what is the meaning of this message and how I can fix the problem.
Thanks in advance for any help
P.S. The order in which I did the installation, in case there is a relation with my problem, was:
1. Designer
2. Database
3. Include the database in the tnsnames.ora of Designer
4. Repository

The problem is you are using LDAP for connection instead of Database Authenication.
Designer is not certified for LDAP connection and this is only the first of a long list of problems you are going to have using LDAP
Michael

Help. Can't purchase iWork get this weird error.

When my wife tries to purchase Apples Numbers from the App Store it won.t let her and gives the following error...
She is signed in to her account OK and has no trouble purchasing music etc through iTunes.
Any help greatly appreciated.

Done that, didn't help. Changing Cirtificate prefs in Keychain enabled the purchase. However now the App's not installing even though it says it is. Hvae tried installing half a dozen times, each time the app doesn't appear in apps folder!

Weird Error!!cant figure it out

Good day ppl! i posted in the Vga section of this forum but noone seems to reply with a clear cut answer..someone said memtest and it reported no errors??pls read my post and give me a diagnosis!! ure help is very much appreciated!
i have a slight problem which i cant seem to find a solution to...
whenever i run games like Counterstrike 1.6 and Warcraft FT, a few mins in the game, i get a weird error which closes the application...the error is as follows:
Microsoft Visual C++ Runtime Library
Runtime Error !
Program D:\Valve\hl.exe
abnormal program termination
once this error shows, i have to click the OK button as nothin else can be clicked.on clicking another error appears....
CiceroUIWndFrame: hl.exe -Application Error
The instruction at "0x10232929" referenced memory at "0x10528688".The memory could not be read.
Click ok to terminate program..
I have to click ok and this terminates my game...becos of this problem i reinstalled my windows XP pro SP1 again and then reinstall my MSI gfx latest drivers again, then also reinstalled the games again.but it still keeps coming..PLS HELP ME!!!
any solution ppl...u all are geniuses as i have come to see and very helpful
MSI 875p Neo Fisr Bios 1.6
512 DDR 400 Twinmos Rams
MSI GF4 FX5600 VTD 128
i dont know but is this a problem with my vga card and if so how can it be solved..
ive run adware, spyware, antivirus, tuneup utilities 2003 to check for any possible errors or virus or worms or trojans but it all comes empty..i have pc-cillin 2003 also and ran a scandisk with no reported viruses..
my power supply is the Vantec ION 400 Wtt powersupply SATA ready..
3.3V 26A
5V 40A
12 16A
i have Twinmoss Pc3200 DDR 400 512 MB ram(single stick)--- no memory issue as of sort as i have more than 70% of it free whenver running windows and programs in the background...
i have 5 cooling fans including a Vantec Tornada( 3 intake and 2 exhaust) with 2 HDD( 80gb and 40gb barrcudas)
i hope this info will be good enuf for u ppl to diagnos my problem
again i thank u all for ure time

Agreed; Since the FX-5800 and up GPU's Require up to 7 Amps from the +12V Rail, then Yes 16 Amps is Very Light indeed , Dont Forget your P4 CPU under Stress (Gaming) Can require up to 10-11 Amps, combine that with the 7 Amps that your GPU May Require, and you are Over your +12V Rails Power capabilities...You should have at Least 20Amps on your +12V Rail, and because you are a Gamer! You should Have one of the Better PSU's Available that have 30 Amps + available on the +12V Rails. ie Enermax 465W or Antec 480W..............Sean REILLY875

Weird error message on Adobe Reader XI installation.

I've just downloaded Adobe Reader XI and started to instal it but get this weird error message: "The ordinal 459 could not be located in the dynamic link library urlmon.dll". What does this mean and what can I do about it?

Hi EbSax,
Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
~Deepak

Constantly getting kernel crash errors

Hi,
I have a Power Mac G4 Gigabit Ethernet with 704MB RAM, dual 500MHz G4 processors and 16MB VRAM and it is running Tiger (10.4.11) and I keep getting that weird error that says "You need to restart your computer" on a black dialogue with a giant power button in the center. I believe this is a kernel crash message and it's getting very annoying. I have to keep hitting the restart button or force the computer to shut down and I don't like doing this. Will my computer be harmed if I do this? Why is it doing this? I think it may be related to my really cheap USB WiFi card I have installed cause that's when it first started. When I pulled the card out (cause it wasn't working correctly) and popped it back in then I got that message a few seconds later.
Thanks

Thanks for the reply. I checked the log and it does say a few things about USB so maybe it is that. I posted the log below so you can double check. As long as it's just that WiFi card then it doesn't matter since I already ordered a new one (PCI 802.11g). But, will I have to reinstall my OS now that I got so many kernel panics? Do those mess up my hardware or software?
Here's the log: (note that this isn't the whole log, just the last two crashes since it would take up too much space to paste the whole log.
Fri Mar 14 14:25:09 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000002155000 PC=0x00000000000ACCF8
Latest crash info for cpu 0:
Exception state (sv=0x245E7000)
PC=0x000ACCF8; MSR=0x00009030; DAR=0x02155000; DSISR=0x40000000; LR=0x0027C0B4; R1=0x10ABB9D0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0027C050 0x007C37DC 0x007BFBA8 0x00474E90 0x004DF274 0x004E0680
0x004E0338 0x004E16E0 0x004E1A14 0x002D1B8C 0x002D0A54 0x000A9714
Kernel loadable modules in backtrace (with dependencies):
com.ZyDAS.driver.ZD1211RevB(4.5.7d0)@0x7be000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x59d000
com.apple.driver.AppleUSBOHCI(2.5.5)@0x4dd000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x460000
com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
Proceeding back via exception chain:
Exception state (sv=0x245E7000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x20CF8780)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x245E7000)
PC=0x000ACCF8; MSR=0x00009030; DAR=0x02155000; DSISR=0x40000000; LR=0x0027C0B4; R1=0x10ABB9D0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0027C050 0x007C37DC 0x007BFBA8 0x00474E90 0x004DF274 0x004E0680
0x004E0338 0x004E16E0 0x004E1A14 0x002D1B8C 0x002D0A54 0x000A9714
Kernel loadable modules in backtrace (with dependencies):
com.ZyDAS.driver.ZD1211RevB(4.5.7d0)@0x7be000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x59d000
com.apple.driver.AppleUSBOHCI(2.5.5)@0x4dd000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
dependency: com.apple.iokit.IOPCIF`
Fri Mar 14 14:59:08 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000021C7000 PC=0x00000000000ACCF8
Latest crash info for cpu 0:
Exception state (sv=0x24B7D000)
PC=0x000ACCF8; MSR=0x00009030; DAR=0x021C7000; DSISR=0x40000000; LR=0x0027C0B4; R1=0x10AAB9D0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0027C050 0x007C37DC 0x007BFBA8 0x00474E90 0x004DF274 0x004E0680
0x004E0338 0x004E16E0 0x004E1A14 0x002D1B8C 0x002D0A54 0x000A9714
Kernel loadable modules in backtrace (with dependencies):
com.ZyDAS.driver.ZD1211RevB(4.5.7d0)@0x7be000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x59d000
com.apple.driver.AppleUSBOHCI(2.5.5)@0x4dd000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x460000
com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
Proceeding back via exception chain:
Exception state (sv=0x24B7D000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x20CF8A00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x24B7D000)
PC=0x000ACCF8; MSR=0x00009030; DAR=0x021C7000; DSISR=0x40000000; LR=0x0027C0B4; R1=0x10AAB9D0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0027C050 0x007C37DC 0x007BFBA8 0x00474E90 0x004DF274 0x004E0680
0x004E0338 0x004E16E0 0x004E1A14 0x002D1B8C 0x002D0A54 0x000A9714
Kernel loadable modules in backtrace (with dependencies):
com.ZyDAS.driver.ZD1211RevB(4.5.7d0)@0x7be000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x59d000
com.apple.driver.AppleUSBOHCI(2.5.5)@0x4dd000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x472000
dependency: com.apple.iokit.IOPCIF`
Thanks

U2 20G is getting a weird error

Similar Messages

Maybe you are looking for