U2414H, HDMI to HDMI compatibility?

I am interested in purchasing the U2414H Monitor & have a few questions. I am sorry to say, but the Dell Support team in India is just not able to answer my queries. Really hope you would be able to solve them. My queries are :
1) I have the following 3 ports at the back of my CPU : a regular HDMI, DVI & VGA port. Can I use the HDMI Port to connect this monitor & will I get the full 1920x1080 @60Hz resolution on display? (I have Windows 8.1 as my OS &  an OnBoard Intel HD Graphics 2500 Card & it does list 1920x1080 (32bit) @60Hz list mode option)
2) Which particular HDMI Cable do I need to buy for connecting the monitor ? Will a regular HDMI-to-HDMI Cable so ? Please do help me with any specifications for the HDMI-to-HDMI Cable.
3) The Monitor has USB 3.0 ports at the back panel. Are there any USB ports on the side panel, as the pictures do not clearly indicate.
4) Is there any problem of the icons at the edge of the desktop screen getting stretched on using HDMI Display connectivity Option.
Hope to hear from you soon & help me choose my monitor.
Thanks,
Prashant.

Thanks a lot Chris for your prompt reply ! Really appreciate your help.
Sorry, I have 3 more questions : Hope you can help me with them.
1) I am a home user and would be mainly using the monitor for more like email, browsing the internet, using Word, Excel, etc & watch an odd movie or so.
What would you suggest : Going for the U2414H or the U2412M Monitor? I am leaning towards the U2414H because of the HDMI connectivity & the USB3.0 ports.
2) Will I need to update my Intel Graphics 2500 drivers to be able to use the U2414H monitor at 1920x1080 resolution with HDMI connectivity?
3) Is the U2414H Monitor Panel glossy & reflects light ? Since, my Desk is facing a wall & behind me there is a huge window? Will there be too much reflection?
Thanks again for your help.
Prashant.

Similar Messages

  • Outraged by lack of info in iTunes about iPad HDMI compatibility?

    I bought an iPad 2 as well as the HDMI adaptor so I could download movies on the go on my iPad and also watch them on my HD TV.
    Turns out that you can't watch every film you download through iTunes on your TV. So, I download The Princess Bride from iTunes, which plays on my TV fine. And then I pay £6.99 for Moon, which all my friends tell me is brilliant. And no. I am not allowed to play this from my iPad to my TV
    Now, I know this is not necessarily Apple's fault, but due to the Canute-like inability of certain studios to engage with the modern world and what consumers actually want.
    However, I do find it obnoxious that in the iPad version of iTunes there is no mention of this fact BEFORE you buy a movie.
    Fine, invent some cockamamie rules about which content I can watch where - but at least let me know about it before I pay you money.
    Has anyone else noticed this? Is anyone else as annoyed as I am?
    Matt ski

    There shouldn't be any licensing restrictions since you've purchased all of that.
    The addition of the copy protection logic certainly complicates the issue and you could have incompatibilities between your TV, cable, and iPad. One suggestion I've seen is to just power cycle all of the devices.
    If that doesn't work, check out the links in this thread: HDMI Digital AV Adapter / FairPlay Movie / Display not Authorized
    If that doesn't work, contact Apple. It should work.

  • Hdmi compatibility with yosemite

    Is it possible that the yosemite update would not allow an hdmi adapter to work on my macbook pro (2012)? Because when we use the adapter on my boyfriends macbook it would work and his laptop wasn't updated with yosemite.

    My CS5, everything the suite works on Yosemite, the latest Java Runtime will be required, that's a simple free upgrade.
    However, for me personally it is running EXTREMELY sluggish! PS is ok at first, but after 15, 20 minutes simple things like selection tool, switching to another layer, clone brush.
    Then erasing..I'll erase something...I get the rainbow spinning wheel for 5, 10 seconds then It shows what I erased, then CTRL+Z to undo and then redo. It lags. not fun!
    Not sure..I've read forums where people are ok with Adobe programs, others state the same issues like I am having, Sucks the RAM dry and I have 12GB of it  Tweaked the cache and scratch disc settings and no improvements.
    Depends on how old the Mac is, mine is a mid 2011 iMac 27in. It ran so amazing in SnowLeopard, Lion. Mavericks, I noticed a slight lag but nothing horrific that annoyed me to no end.
    Now. eh.

  • Apple tv and smartboard projector ux60 not compatable?

    Our school bought a new apple tv to connect to our smartboards. The smartboard projector we use is a UX60. We've connected them via HDMI but the signal does not project. I have a feeling it's an HDMI compatability issue. Sometimes we get a quick green screen, some static, and I've even seen the apple tv screen for a brief second. Overall we just get nothing at all. Has anyone else had this problem and is there something we can do to make it work?

    UPDATE!
    We finally had success by using a shorter HDMI cord (3 ft.)
    So the answer to the question is "yes" but use a very short cord.

  • IMac Display as Monitor for PC

    I have an iMac 2.66 GHz Intel Core 2 Duo, 2 GB RAM, OS X 10.6.2 and an old Dell Pentium III 933 MHz which I would love to somehow connect together. I am considering to install Linux on my Dell and use both computers for different reasons. I wonder if I would be able to use my iMac like a monitor for the old PC.
    I have come across the following discussions but it seems that they don't cover my case, i.e., an old Dell that does not have a port for a display port.
    http://discussions.apple.com/thread.jspa?threadID=2246912
    Any suggestions and thoughts would be most appreciated.

    Ron-
    There are more details here--
    http://discussions.apple.com/thread.jspa?threadID=2205633&start=30&tstart=90
    --but the basic problem is that you need a DisplayPort signal to drive the iMac monitor. You can convert a digital DVI output (or HDMI which is the same thing with audio and a different physical connector) to DP format with an expensive converter, but there is no way to convert an analog VGA signal to DP format. The cheaper but more complicated solution for a PC with DVI output, and the only solution for one with VGA output, is to replace your video card with a DisplayPort or Mini-DisplayPort card. Mini-DisplayPort has the same signal but a smaller physical connector.
    This was not actually Apple being arbitrary: DisplayPort is more efficient and less expensive than DVI/HDMI because it dispenses with a lot of the conversion hardware needed for that format. Therefore Apple couldn't provide DVI/HDMI compatibility without increasing the iMac cost substantially.
    -JAFDC

  • Ipad 1 and Apple TV2

    My brother, who lives in a nursing home with Wi-Fi, wants to "show" the photos on his ipad (1st generation) on a large HDMI compatable television screen (to teach a class).an  He does NOT have a computer. Can he use Apple TV2 to "project" the pictures one at a time (not a slideshow)?
    Thanks, Patricia

    I have the original iPad,too! Until iPad3 comes out and I can see what significant advances/advantages it will have over my iPad1, I have stayed with my iPad1 and it gets a lot of use everyday. I would love to see video mirroring implemented, as well. That said, the reason it, probably, hasn't happened is that the iPad1 may not have enough bulit-in RAM to support both video on the iPad and outputting of video to another device simultaneously.
    Also, these discussion boards are user to user forums. There are no, regular, Apple employees monitoring anything going on anywhere in these boards.
    If you want to request a feature, fix a feature or suggest a new feature for iPad, you can go here to do so.
    http://www.apple.com/feedback/ipad.html

  • TS1741 where can i go to see if my tv is compatible with Apple TV

    I cannot seem to find out if my apple tv is compatible with my TV. I have a 42 Flat screen with HDMI compatibility. its a Sanyo. Can n e one help?

    If it has HDMI with HDCP and supports 720p or 1080p (AppleTV3) you should be fine.
    There are occasional incompatibilities but these are uncommon.
    AC

  • Apple TV (new) reboots often

    I just bought a new Apple TV (model is MD199LL/A.).   I have not used Apple TV before.
    When it works, it works great.  But it sure reboots (crashes) quite a lot, like when making any setting changes.  I also have used it for MLB.tv with a paid Premium subscription, and I cannot watch more than 10-15 mins of a game before it reboots spontaneoulsy.
    I did a reset already.  No change.  Its running 5.0 (4099).
    My internet connection is excellent.  The Apple TV was to take the place of a Roku box, which worked just fine on same connection.  I can stream MLB.tv just fine to my computers, Ipad, IPhone, or Roku.   Its just the Apple TV that reboots often.  To be clear, MLB.tv is what I mostly use it for - and it experiences reboots.  But it will reboot just going thru my settings and say changing the account for PhotoStream.
    Without a reference point, I am wondering if I may have just gotten a lemon - a defective unit.  Or is it this shaky right now ?   I don't know if I should take it back to the Apple Store and ask for an exchange, or maybe I should wait for a firmware update for it.     What are others seei

    That's not normal or satisfactory.
    They are never 100% stable these devices but what you describe does not sound normal.  It should not reboot just changing Settings.
    Never used MLB.tv so can't help you on that but doesn't sound right.
    Personally I'd get it exchanged in case it is faulty.  Not sure if you've done a software restore via itunes with a microUSB to USB cable alone, but I'd have concerns about an underlying hardware fault and want it exchanged.
    If you can before doing so it would be worth testing with a different TV and HDMI cable in case of an HDMI compatibility issue with the TV or an intermittent lead fault causing the reboot.
    If a second unit does it there's probably something about your specific setup that's tripping it up and that can be difficult to p[in down except by a process of exclusion.

  • Force RGB over HDMI connection??!! (Dell U2414H)

    Since Apple's support refuses to help me, nor do they seem to grasp incredibly basic technical information regarding monitors, I'm turning to you, dear forum.
    I just bought two brand brand and professional calibrated Dell U2414H monitors to use with my Mac mini workstation in an extended desktop environment.  ...even though Apple themselves erroneously told me I'd be able to daisy chain these monitors over the Thunderbolt connection using MiniDisplay Port 1.2 MST... (they were wrong, their GPU doesn't support DP 1.2)...  So, I resorted to plugging the second monitor into the available HDMI port.
    Problem:  The Mac OS will not send the right color space (RGB) over HDMI.  It sees the monitor as a TV for some reason, and will only send YPbPr... Therefore, my monitors that I paid extra to have calibrated perfectly, do not match.
    I ran this script: http://embdev.net/topic/284710#3027030
    but it didn't change anything.  I'm searching for new solutions now...
    Can anyone help?

    Here... I solved it:
    Dell U2414H Monitor - RGB COLOR ISSUE [SOLVED!] - The EASY way!

  • HDMI Capture Card as ExpressCard and FMLE compatibility

    Hi,
    I want to live stream HDMI video through my laptop with express card slot via FMLE into the net. Did anyone try these cards and can tell me about their compatibility to FMLE?
    I can run both windows and osx.
    DELOCK HDMI Capture Card / ExpressCard (this one has microsoft directshow)
    MOTU Express Card HDMI IN device (without the MOTU HDX-SDI interface) (didn't find anything about directshow)
    YUAN SC500 N1 EC (didn't find anything about directshow)
    do you have more ideas?
    Best,
    effraenk

    The manycam product trial is useless for what I am trying to do, which is what I beleive pomtom44 is trying to do. I need a capture card of some kind, prefereably an HD capture card, to be seen as Skype as a video and audio source that I can use.

  • IMAC 8.1 IS IT COMPATABLE WITH MINI ADAPTOR TO HDMI CABLE TO TV?

    I have a imac 8.1 running 10.6.8, Im tryint to get the picture and sound to the Tv for viewing and screen sharing. I have the Mini DisplayPort to HDMI Adaptor to the HDMI Cable but cannot get it to work as when i go to system preferences, Display, I cannot find appearances.   Cananyone help me, I was told I have the correct accessories but cannot get it to work, the Tv is new and has the correct HDMI connections, Thanks Paula

    I looked up "iMac 8.1" on everymac.com and it indicates this model has a DVI output, not a miniDisplayPort output.  Are you sure you are using the correct adapter?
    Also, your TV has to be set to the same HDMI input that you connected to your iMac.  If its set to a different input, the Mac will not "see" your TV.   (eg, if your iMac is connected to the TV's HDMI-1 input, on the TV you must select the HDMI-1 input).    Note, also, that some TVs only support computer connections on certain inputs.  Check the manual for instructions on this.  (On my Sony Bravia HDTV, the manual is explicit that computers need to be connected to HDMI-4, for reasons not explained.)

  • Displayport /USB to HDMI adapter compatibility under the Bootcamp

    I read that the Displayport/ USB to HDMI adapter works well with Apple but has anyone tested within Windows environment under Bootcamp? Are there drivers that support the adapter already?

    Usually, A *[USB to HDMI Adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in MacBook/Windows OS.. You just need to download the usb display adapter driver.. But i have on idea that a *[usb hdmi adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in Bootcamp. Maybe it's OK.

  • HDMI cable compatibility with Computer

    Hi, I tried buying a Google Chromecast, it didn't work they said because it's Windows Vista. Then I bought an HDMI cable to connect my TV to my computer, that's what I heard to do. There is no connection to the computer for the HDMI cable. Is that because it's too old? Its about six years old. Will a new computer be compatible?

    Laptop or Desktop.
    If your computer has HDMI output it should project on the TV.
    However, you need to extend your display to the TV.
    If your on a laptop there may be a key on the keyboard, often a secondary function of an F# key, that you can press and extend your display.
    Or, and I don't know how to get into it on Vista, you need to go into your display properties and extend the display to the TV.   Possibly a right click on your desktop.
    and I am not certain how display properties look on Vista.  
    Do this with the hdmi cable plugged into your TV and computer.  In display properties if you only see one monitor there should be an option to add a second,  Then there should be an option to EXTEND the display.  You can either show the same thing on both displays or set it up as a second display.
    I know Vista can support this.  I installed a GPU with an HDMI output on my fathers computer some years ago so he could watch Netfliix on his TV
    Do a Google Search for 
    about tech display vista
    The third hit when I did it is for online-tech-tips and it gives a good simple way to do this with pictures.

  • [Solved] Issue setting HDMI audio to default

    Hoping I'm not overlooking something very simple here.
    I have a Radeon HD4650 in my HTPC which I'm trying to run the audio through the HDMI output. I've set the kernel parameter "radeon.audio=1" and am able to hear sound through HDMI when I specify it manually within each application (for example XBMC or VLC going to Audio->Audio Device->HD-Audio Generic, HDMI 0 HDMI Audio Output).
    From there I tried to set the HDMI audio as default by following the wiki here:
    https://wiki.archlinux.org/index.php/Al … sound_card
    And here:
    https://wiki.archlinux.org/index.php/Al … s_not_work
    I've tried several combinations within my .asoundrc and asound.conf including:
    pcm.!default {
    type plug
    slave.pcm {
    @func getenv
    vars [ ALSAPCM ]
    default "hw:0,3"
    defaults.pcm.card 0
    defaults.pcm.device 3
    defaults.ctl.card 0
    pcm.!default "plughw:0,3"
    ctl.!default "plughw:0,3"
    pcm.dmixer {
    type dmix
    ipc_key 2048
    slave {
    pcm "hw:0,3"
    period_size 512
    buffer_size 4096
    rate 48000
    format S16_LE
    bindings {
    0 0
    1 1
    pcm.!default {
    type plug
    slave.pcm dmixer
    pcm:iec958 {
    type plug
    slave.pcm dmixer
    pcm.!default {
    type plug
    slave {
    pcm "hw:0,3"
    ctl.!default {
    type hw
    card 0
    Most of these I just copied from the wiki or various forum posts I found and edited the proper device in. These appear to work, as the HDMI card shows up as default in alsamixer (I've made sure everything is unmuted here), but selecting the default channel in VLC still results in no sound, not even from the built in audio (I can change the output to the HDMI option and it works fine).
    I've also tried this which results in no sound:
    aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    Is there something I'm missing here?
    Here's my aplay -l:
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    A quick note here: I set this option in /etc/modprobe.d/:
    options snd_hda_intel index=-2
    This moved the HDMI card up to device 0 instead of 1. I've tried everything above as well with plughw:1,3 when that was the HDMI device.
    aplay -L:
    null
    Discard all samples (playback) or generate zero samples (capture)
    hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
    sysdefault:CARD=Intel
    HDA Intel, ALC1200 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Digital
    IEC958 (S/PDIF) Digital Audio Output
    lsmod | grep snd:
    snd_hda_codec_hdmi 29701 1
    snd_hda_codec_realtek 35517 1
    snd_hda_intel 35309 0
    snd_hda_codec 147474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6332 1 snd_hda_codec
    snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    snd 58950 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5418 1 snd
    amixer -c 0:
    Simple mixer control 'PCM',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [on]
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013
    [ 0.000000] Command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ee6ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ee70000-0x000000007eecbfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007eecc000-0x000000007fdf4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fdf5000-0x000000007fe00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007fe01000-0x000000007fe97fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fe98000-0x000000007fee7fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007fee8000-0x000000007feebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007feec000-0x000000007fef0fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007fef1000-0x000000007fef1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fef2000-0x000000007fefefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007feff000-0x000000007fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
    [ 0.000000] [mem 0x7fa00000-0x7fbfffff] page 2M
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ee6ffff]
    [ 0.000000] [mem 0x7c000000-0x7edfffff] page 2M
    [ 0.000000] [mem 0x7ee00000-0x7ee6ffff] page 4k
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7eecc000-0x7f9fffff]
    [ 0.000000] [mem 0x7eecc000-0x7effffff] page 4k
    [ 0.000000] [mem 0x7f000000-0x7f9fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdf4fff]
    [ 0.000000] [mem 0x7fc00000-0x7fdf4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] [mem 0x7fe01000-0x7fe97fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] [mem 0x7fee8000-0x7feebfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] [mem 0x7fef1000-0x7fef1fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] [mem 0x7feff000-0x7fefffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x7e79a000-0x7ee6efff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
    [ 0.000000] ACPI: RSDT 000000007fefd038 0004C (v01 INTEL ECG3510M 00000076 01000013)
    [ 0.000000] ACPI: FACP 000000007fefc000 00074 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000007fef6000 05BEB (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000007fe98000 00040
    [ 0.000000] ACPI: APIC 000000007fef5000 00078 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 000000007fef4000 00040 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000007fef3000 0003C (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: ASF! 000000007fef2000 000A6 (v32 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007fef0000 0020C (v01 INTEL CpuPm 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feef000 001B7 (v01 INTEL Cpu0Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feee000 001B7 (v01 INTEL Cpu1Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feed000 001B7 (v01 INTEL Cpu2Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feec000 001B7 (v01 INTEL Cpu3Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    [ 0.000000] NODE_DATA [mem 0x7fe93000-0x7fe97fff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c600000-ffff88007e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008efff]
    [ 0.000000] node 0: [mem 0x00100000-0x7ee6ffff]
    [ 0.000000] node 0: [mem 0x7eecc000-0x7fdf4fff]
    [ 0.000000] node 0: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] node 0: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] node 0: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] node 0: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] On node 0 totalpages: 523716
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3982 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8124 pages used for memmap
    [ 0.000000] DMA32 zone: 519734 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000007ee70000 - 000000007eecc000
    [ 0.000000] PM: Registered nosave memory: 000000007fdf5000 - 000000007fe01000
    [ 0.000000] PM: Registered nosave memory: 000000007fe98000 - 000000007fee8000
    [ 0.000000] PM: Registered nosave memory: 000000007feec000 - 000000007fef1000
    [ 0.000000] PM: Registered nosave memory: 000000007fef2000 - 000000007feff000
    [ 0.000000] e820: [mem 0x80000000-0xffefffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86144 r8192 d24448 u524288
    [ 0.000000] pcpu-alloc: s86144 r8192 d24448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515507
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2042856k/2096128k available (4920k kernel code, 1264k absent, 52008k reserved, 4046k data, 1124k init)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2188.974 MHz processor
    [ 0.006671] Calibrating delay loop (skipped), value calculated using timer frequency.. 4379.36 BogoMIPS (lpj=7296580)
    [ 0.006675] pid_max: default: 32768 minimum: 301
    [ 0.006714] Security Framework initialized
    [ 0.006729] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006937] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008033] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.008556] Mount-cache hash table entries: 256
    [ 0.008842] Initializing cgroup subsys memory
    [ 0.008862] Initializing cgroup subsys devices
    [ 0.008864] Initializing cgroup subsys freezer
    [ 0.008866] Initializing cgroup subsys net_cls
    [ 0.008868] Initializing cgroup subsys blkio
    [ 0.008905] CPU: Physical Processor ID: 0
    [ 0.008907] CPU: Processor Core ID: 0
    [ 0.008910] mce: CPU supports 6 MCE banks
    [ 0.008918] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.009009] Freeing SMP alternatives: 20k freed
    [ 0.010372] ACPI: Core revision 20130328
    [ 0.013611] ACPI: All ACPI Tables successfully acquired
    [ 0.014894] ftrace: allocating 19564 entries in 77 pages
    [ 0.020479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055426] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.056666] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.056666] ... version: 2
    [ 0.056666] ... bit width: 40
    [ 0.056666] ... generic registers: 2
    [ 0.056666] ... value mask: 000000ffffffffff
    [ 0.056666] ... max period: 000000007fffffff
    [ 0.056666] ... fixed-purpose events: 3
    [ 0.056666] ... event mask: 0000000700000003
    [ 0.090007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.076769] smpboot: Booting Node 0, Processors #1
    [ 0.090021] Brought up 2 CPUs
    [ 0.090024] smpboot: Total of 2 processors activated (8759.72 BogoMIPS)
    [ 0.091305] devtmpfs: initialized
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7ee70000-0x7eecbfff] (376832 bytes)
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7fe98000-0x7fee7fff] (327680 bytes)
    [ 0.091305] RTC time: 21:34:09, date: 08/06/13
    [ 0.091305] NET: Registered protocol family 16
    [ 0.091305] ACPI: bus type PCI registered
    [ 0.091305] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.091305] PCI: not using MMCONFIG
    [ 0.091305] PCI: Using configuration type 1 for base access
    [ 0.093396] bio: create slab <bio-0> at 0
    [ 0.093411] ACPI: Added _OSI(Module Device)
    [ 0.093411] ACPI: Added _OSI(Processor Device)
    [ 0.093411] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.093411] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.094284] ACPI: EC: Look up EC in DSDT
    [ 0.097855] ACPI: Interpreter enabled
    [ 0.097864] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [ 0.097879] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.097881] ACPI: Using IOAPIC for interrupt routing
    [ 0.097896] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.098027] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
    [ 0.115962] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.116042] ACPI: No dock devices found.
    [ 0.121485] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.122691] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
    [ 0.122777] PCI host bridge to bus 0000:00
    [ 0.122781] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.122783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.122786] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.122788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.122791] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
    [ 0.122793] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
    [ 0.122795] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
    [ 0.122806] pci 0000:00:00.0: [8086:2980] type 00 class 0x060000
    [ 0.122920] pci 0000:00:01.0: [8086:2981] type 01 class 0x060400
    [ 0.122965] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.122994] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.123063] pci 0000:00:19.0: [8086:104b] type 00 class 0x020000
    [ 0.123081] pci 0000:00:19.0: reg 10: [mem 0x90b00000-0x90b1ffff]
    [ 0.123089] pci 0000:00:19.0: reg 14: [mem 0x90b24000-0x90b24fff]
    [ 0.123098] pci 0000:00:19.0: reg 18: [io 0x30c0-0x30df]
    [ 0.123156] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.123180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 0.123224] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.123264] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.123345] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.123387] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.123427] pci 0000:00:1a.1: reg 20: [io 0x3080-0x309f]
    [ 0.123507] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.123560] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.123579] pci 0000:00:1a.7: reg 10: [mem 0x90b25400-0x90b257ff]
    [ 0.123661] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.123725] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.123775] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.123790] pci 0000:00:1b.0: reg 10: [mem 0x90b20000-0x90b23fff 64bit]
    [ 0.123859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.123926] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.123974] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.124043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.124074] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.124118] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    [ 0.124188] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.124220] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.124264] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    [ 0.124333] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.124366] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.124414] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.124454] pci 0000:00:1d.0: reg 20: [io 0x3060-0x307f]
    [ 0.124522] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.124567] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.124607] pci 0000:00:1d.1: reg 20: [io 0x3040-0x305f]
    [ 0.124675] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.124717] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.124757] pci 0000:00:1d.2: reg 20: [io 0x3020-0x303f]
    [ 0.124827] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.124880] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.124899] pci 0000:00:1d.7: reg 10: [mem 0x90b25000-0x90b253ff]
    [ 0.124981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.125043] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.125088] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.125156] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.125205] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
    [ 0.125284] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.125289] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    [ 0.125293] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    [ 0.125376] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
    [ 0.125390] pci 0000:00:1f.2: reg 10: [io 0x3438-0x343f]
    [ 0.125399] pci 0000:00:1f.2: reg 14: [io 0x344c-0x344f]
    [ 0.125407] pci 0000:00:1f.2: reg 18: [io 0x3430-0x3437]
    [ 0.125415] pci 0000:00:1f.2: reg 1c: [io 0x3448-0x344b]
    [ 0.125423] pci 0000:00:1f.2: reg 20: [io 0x3410-0x341f]
    [ 0.125432] pci 0000:00:1f.2: reg 24: [io 0x3400-0x340f]
    [ 0.125461] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.125543] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.125555] pci 0000:00:1f.3: reg 10: [mem 0x90b25800-0x90b258ff]
    [ 0.125582] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.125683] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
    [ 0.125697] pci 0000:00:1f.5: reg 10: [io 0x3428-0x342f]
    [ 0.125706] pci 0000:00:1f.5: reg 14: [io 0x3444-0x3447]
    [ 0.125714] pci 0000:00:1f.5: reg 18: [io 0x3420-0x3427]
    [ 0.125722] pci 0000:00:1f.5: reg 1c: [io 0x3440-0x3443]
    [ 0.125730] pci 0000:00:1f.5: reg 20: [io 0x30f0-0x30ff]
    [ 0.125739] pci 0000:00:1f.5: reg 24: [io 0x30e0-0x30ef]
    [ 0.125768] pci 0000:00:1f.5: PME# supported from D3hot
    [ 0.125901] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
    [ 0.125917] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.125930] pci 0000:01:00.0: reg 18: [mem 0x90a00000-0x90a1ffff 64bit]
    [ 0.125939] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
    [ 0.125954] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.125992] pci 0000:01:00.0: supports D1 D2
    [ 0.126044] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
    [ 0.126060] pci 0000:01:00.1: reg 10: [mem 0x90a20000-0x90a23fff 64bit]
    [ 0.126130] pci 0000:01:00.1: supports D1 D2
    [ 0.126194] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.126198] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.126201] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.126206] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.126282] pci 0000:02:00.0: [1106:3432] type 00 class 0x0c0330
    [ 0.126300] pci 0000:02:00.0: reg 10: [mem 0x90900000-0x90900fff]
    [ 0.126416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.130024] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.130034] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.130126] pci 0000:03:00.0: [1131:7164] type 00 class 0x048000
    [ 0.130153] pci 0000:03:00.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.130174] pci 0000:03:00.0: reg 18: [mem 0x90400000-0x907fffff 64bit]
    [ 0.130281] pci 0000:03:00.0: supports D1 D2
    [ 0.130283] pci 0000:03:00.0: PME# supported from D0 D1 D2
    [ 0.136688] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.136698] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.136792] pci 0000:04:00.0: [197b:2368] type 00 class 0x010185
    [ 0.136823] pci 0000:04:00.0: reg 10: [io 0x1018-0x101f]
    [ 0.136837] pci 0000:04:00.0: reg 14: [io 0x1024-0x1027]
    [ 0.136851] pci 0000:04:00.0: reg 18: [io 0x1010-0x1017]
    [ 0.136866] pci 0000:04:00.0: reg 1c: [io 0x1020-0x1023]
    [ 0.136880] pci 0000:04:00.0: reg 20: [io 0x1000-0x100f]
    [ 0.136906] pci 0000:04:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.137025] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.137035] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.137039] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.137098] pci 0000:05:03.0: [1814:0301] type 00 class 0x028000
    [ 0.137116] pci 0000:05:03.0: reg 10: [mem 0x90800000-0x90807fff]
    [ 0.137237] pci 0000:05:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.137254] pci 0000:05:05.0: reg 10: [mem 0x90808000-0x90808fff]
    [ 0.137329] pci 0000:05:05.0: supports D1 D2
    [ 0.137331] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.137409] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
    [ 0.137415] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.137421] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.137423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.137426] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.137428] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
    [ 0.137431] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
    [ 0.137433] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
    [ 0.137455] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.137457] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.137544] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137753] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.137887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.138021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.138507] ACPI: Enabled 4 GPEs in block 00 to 1F
    [ 0.138515] acpi root: \_SB_.PCI0 notify handler is installed
    [ 0.138552] Found 1 acpi root devices
    [ 0.138645] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.138645] vgaarb: loaded
    [ 0.138645] vgaarb: bridge control possible 0000:01:00.0
    [ 0.138645] PCI: Using ACPI for IRQ routing
    [ 0.141702] PCI: pci_cache_line_size set to 64 bytes
    [ 0.141771] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
    [ 0.141774] e820: reserve RAM buffer [mem 0x7ee70000-0x7fffffff]
    [ 0.141776] e820: reserve RAM buffer [mem 0x7fdf5000-0x7fffffff]
    [ 0.141778] e820: reserve RAM buffer [mem 0x7fe98000-0x7fffffff]
    [ 0.141780] e820: reserve RAM buffer [mem 0x7feec000-0x7fffffff]
    [ 0.141782] e820: reserve RAM buffer [mem 0x7fef2000-0x7fffffff]
    [ 0.141784] e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    [ 0.141898] NetLabel: Initializing
    [ 0.141900] NetLabel: domain hash size = 128
    [ 0.141901] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.141917] NetLabel: unlabeled traffic allowed by default
    [ 0.141945] Switching to clocksource refined-jiffies
    [ 0.148603] pnp: PnP ACPI init
    [ 0.148630] ACPI: bus type PNP registered
    [ 0.148744] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
    [ 0.148747] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.148750] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.148753] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.148756] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.148758] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.148761] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.148764] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
    [ 0.148767] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
    [ 0.148769] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.148774] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.148919] pnp 00:01: [dma 4]
    [ 0.148948] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.148992] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.149031] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.149063] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.149126] system 00:05: [io 0x0500-0x053f] has been reserved
    [ 0.149129] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.149132] system 00:05: [io 0x0360-0x0361] has been reserved
    [ 0.149135] system 00:05: [io 0x0680-0x06ff] has been reserved
    [ 0.149139] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149220] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149501] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.149573] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.149624] pnp: PnP ACPI: found 9 devices
    [ 0.149626] ACPI: bus type PNP unregistered
    [ 0.156213] Switching to clocksource acpi_pm
    [ 0.156232] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.156236] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.156264] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.156267] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.156276] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.156279] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.156288] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
    [ 0.156291] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
    [ 0.156304] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156307] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156310] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.156313] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.156315] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156318] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156324] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156327] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156330] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
    [ 0.156334] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8600000-0xf88fffff pref]
    [ 0.156337] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.156340] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.156344] pci 0000:01:00.0: BAR 6: assigned [mem 0x90a40000-0x90a5ffff pref]
    [ 0.156348] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.156351] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.156355] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.156358] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156363] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.156366] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.156371] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.156375] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156381] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.156384] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.156389] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.156393] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156400] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8600000-0xf860ffff pref]
    [ 0.156402] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.156405] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.156410] pci 0000:00:1c.2: bridge window [mem 0xf8400000-0xf85fffff]
    [ 0.156414] pci 0000:00:1c.2: bridge window [mem 0xf8600000-0xf88fffff pref]
    [ 0.156421] pci 0000:00:1e.0: PCI bridge to [bus 05]
    [ 0.156425] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.156425] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.156425] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.156425] pci_bus 0000:01: resource 1 [mem 0x90a00000-0x90afffff]
    [ 0.156425] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156425] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.156425] pci_bus 0000:02: resource 1 [mem 0x90900000-0x909fffff]
    [ 0.156425] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156425] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.156425] pci_bus 0000:03: resource 1 [mem 0x90000000-0x907fffff]
    [ 0.156425] pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156425] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    [ 0.156425] pci_bus 0000:04: resource 1 [mem 0xf8400000-0xf85fffff]
    [ 0.156425] pci_bus 0000:04: resource 2 [mem 0xf8600000-0xf88fffff pref]
    [ 0.156425] pci_bus 0000:05: resource 1 [mem 0x90800000-0x908fffff]
    [ 0.156425] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:05: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:05: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] NET: Registered protocol family 2
    [ 0.156425] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.156425] TCP: reno registered
    [ 0.156425] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] NET: Registered protocol family 1
    [ 0.156791] pci 0000:01:00.0: Boot video device
    [ 0.156891] PCI: CLS 64 bytes, default 64
    [ 0.156941] Unpacking initramfs...
    [ 0.310182] Freeing initrd memory: 6996k freed
    [ 0.313496] Scanning for low memory corruption every 60 seconds
    [ 0.313787] audit: initializing netlink socket (disabled)
    [ 0.313804] type=2000 audit(1375824849.313:1): initialized
    [ 0.326819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.328674] VFS: Disk quotas dquot_6.5.2
    [ 0.328731] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.328948] msgmni has been set to 4003
    [ 0.329231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.329273] io scheduler noop registered
    [ 0.329276] io scheduler deadline registered
    [ 0.329310] io scheduler cfq registered (default)
    [ 0.329439] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.329503] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.329571] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.329644] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.329814] intel_idle: does not run on family 6 model 15
    [ 0.329849] GHES: HEST is not enabled!
    [ 0.329917] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.350447] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.350819] Linux agpgart interface v0.103
    [ 0.350895] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.353919] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.353952] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.354077] mousedev: PS/2 mouse device common for all mice
    [ 0.354143] rtc_cmos 00:02: RTC can wake from S4
    [ 0.354275] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.354297] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram
    [ 0.354307] cpuidle: using governor ladder
    [ 0.354309] cpuidle: using governor menu
    [ 0.354362] drop_monitor: Initializing network drop monitor service
    [ 0.354438] TCP: cubic registered
    [ 0.354554] NET: Registered protocol family 10
    [ 0.354764] NET: Registered protocol family 17
    [ 0.354780] Key type dns_resolver registered
    [ 0.355037] PM: Checking hibernation image partition /dev/system/swap
    [ 0.397240] PM: Hibernation image not present or could not be loaded.
    [ 0.397253] registered taskstats version 1
    [ 0.397804] Magic number: 9:719:600
    [ 0.397885] rtc_cmos 00:02: setting system clock to 2013-08-06 21:34:10 UTC (1375824850)
    [ 0.398920] Freeing unused kernel memory: 1124k freed
    [ 0.399295] Write protecting the kernel read-only data: 8192k
    [ 0.402578] Freeing unused kernel memory: 1212k freed
    [ 0.404163] Freeing unused kernel memory: 408k freed
    [ 0.412320] systemd-udevd[45]: starting version 204
    [ 0.417813] [drm] Initialized drm 1.1.0 20060810
    [ 0.423117] [drm] radeon kernel modesetting enabled.
    [ 0.423539] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE180).
    [ 0.423580] [drm] register mmio base: 0x90A00000
    [ 0.423582] [drm] register mmio size: 131072
    [ 0.424493] ATOM BIOS: CAICOS
    [ 0.424939] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 0.424942] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [ 0.425844] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 0.425848] [drm] RAM width 64bits DDR
    [ 0.425929] [TTM] Zone kernel: Available graphics memory: 1026308 kiB
    [ 0.425931] [TTM] Initializing pool allocator
    [ 0.425937] [TTM] Initializing DMA pool allocator
    [ 0.425964] [drm] radeon: 512M of VRAM memory ready
    [ 0.425966] [drm] radeon: 512M of GTT memory ready.
    [ 0.426256] radeon 0000:01:00.0: ffff88007e85a800 unpin not necessary
    [ 0.881477] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90008be6118
    [ 0.881489] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 0.882702] [drm] Loading CAICOS Microcode
    [ 0.901197] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 0.901323] radeon 0000:01:00.0: WB enabled
    [ 0.901327] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880079fd2c00
    [ 0.901330] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880079fd2c0c
    [ 0.903890] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc90009432118
    [ 0.903895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.903897] [drm] Driver supports precise vblank timestamp query.
    [ 0.903924] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 0.903940] radeon 0000:01:00.0: radeon: using MSI.
    [ 0.903977] [drm] radeon: irq initialized.
    [ 0.920415] [drm] ring test on 0 succeeded in 2 usecs
    [ 0.920480] [drm] ring test on 3 succeeded in 1 usecs
    [ 1.106683] [drm] ring test on 5 succeeded in 2 usecs
    [ 1.106688] [drm] UVD initialized successfully.
    [ 1.106780] [drm] Enabling audio support
    [ 1.106827] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 1.106873] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 1.259354] [drm] ib test on ring 5 succeeded
    [ 1.259721] [drm] Radeon Display Connectors
    [ 1.259723] [drm] Connector 0:
    [ 1.259725] [drm] HDMI-A-1
    [ 1.259726] [drm] HPD2
    [ 1.259729] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 1.259730] [drm] Encoders:
    [ 1.259732] [drm] DFP1: INTERNAL_UNIPHY1
    [ 1.259733] [drm] Connector 1:
    [ 1.259734] [drm] VGA-1
    [ 1.259736] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 1.259738] [drm] Encoders:
    [ 1.259739] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.259818] [drm] Internal thermal controller with fan control
    [ 1.260722] [drm] radeon: power management initialized
    [ 1.313356] tsc: Refined TSC clocksource calibration: 2188.999 MHz
    [ 1.313363] Switching to clocksource tsc
    [ 1.331618] [drm] fb mappable at 0x80375000
    [ 1.331620] [drm] vram apper at 0x80000000
    [ 1.331622] [drm] size 8294400
    [ 1.331623] [drm] fb depth is 24
    [ 1.331625] [drm] pitch is 7680
    [ 1.331702] fbcon: radeondrmfb (fb0) is primary device
    [ 1.544648] Console: switching to colour frame buffer device 240x67
    [ 1.550480] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 1.550482] radeon 0000:01:00.0: registered panic notifier
    [ 1.550488] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
    [ 1.551576] device-mapper: uevent: version 1.0.3
    [ 1.551788] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
    [ 1.584940] SCSI subsystem initialized
    [ 1.587002] ACPI: bus type ATA registered
    [ 1.587124] ACPI: bus type USB registered
    [ 1.587165] usbcore: registered new interface driver usbfs
    [ 1.587199] libata version 3.00 loaded.
    [ 1.587772] ata_piix 0000:00:1f.2: version 2.13
    [ 1.587914] ata_piix 0000:00:1f.2: MAP [
    [ 1.587916] P0 P2 P1 P3 ]
    [ 1.590067] usbcore: registered new interface driver hub
    [ 1.590515] usbcore: registered new device driver usb
    [ 1.591219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.591393] ehci-pci: EHCI PCI platform driver
    [ 1.592276] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592288] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
    [ 1.592501] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 1.592673] xHCI xhci_add_endpoint called for root hub
    [ 1.592675] xHCI xhci_check_bandwidth called for root hub
    [ 1.592706] hub 1-0:1.0: USB hub found
    [ 1.592713] hub 1-0:1.0: 1 port detected
    [ 1.592813] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592819] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
    [ 1.592917] xHCI xhci_add_endpoint called for root hub
    [ 1.592919] xHCI xhci_check_bandwidth called for root hub
    [ 1.592948] hub 2-0:1.0: USB hub found
    [ 1.592957] hub 2-0:1.0: 4 ports detected
    [ 1.593131] scsi0 : pata_jmicron
    [ 1.593158] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.593424] scsi1 : pata_jmicron
    [ 1.593609] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
    [ 1.593612] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 18
    [ 1.596715] firewire_ohci 0000:05:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x80
    [ 1.740079] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.740483] scsi2 : ata_piix
    [ 1.740779] scsi3 : ata_piix
    [ 1.741044] ata3: SATA max UDMA/133 cmd 0x3438 ctl 0x344c bmdma 0x3410 irq 19
    [ 1.741049] ata4: SATA max UDMA/133 cmd 0x3430 ctl 0x3448 bmdma 0x3418 irq 19
    [ 1.741248] ata_piix 0000:00:1f.5: MAP [
    [ 1.741250] P0 -- P1 -- ]
    [ 1.741284] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 1.741526] scsi4 : ata_piix
    [ 1.741784] scsi5 : ata_piix
    [ 1.742032] ata5: SATA max UDMA/133 cmd 0x3428 ctl 0x3444 bmdma 0x30f0 irq 19
    [ 1.742036] ata6: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x30f8 irq 19
    [ 1.742228] ehci-pci 0000:00:1a.7: setting latency timer to 64
    [ 1.742244] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 1.742252] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
    [ 1.742266] ehci-pci 0000:00:1a.7: debug port 1
    [ 1.746161] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.746168] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90b25400
    [ 1.753360] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.753568] hub 3-0:1.0: USB hub found
    [ 1.753573] hub 3-0:1.0: 4 ports detected
    [ 1.753841] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.753845] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.753852] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
    [ 1.753886] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 1.754034] hub 4-0:1.0: USB hub found
    [ 1.754039] hub 4-0:1.0: 2 ports detected
    [ 1.754278] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.754282] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.754288] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
    [ 1.754321] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080
    [ 1.754470] hub 5-0:1.0: USB hub found
    [ 1.754475] hub 5-0:1.0: 2 ports detected
    [ 1.754707] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.754711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.754717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.754748] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
    [ 1.754886] hub 6-0:1.0: USB hub found
    [ 1.754890] hub 6-0:1.0: 2 ports detected
    [ 1.755113] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.755117] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.755123] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.755146] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
    [ 1.755279] hub 7-0:1.0: USB hub found
    [ 1.755284] hub 7-0:1.0: 2 ports detected
    [ 1.755501] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.755505] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.755511] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.755533] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
    [ 1.755672] hub 8-0:1.0: USB hub found
    [ 1.755677] hub 8-0:1.0: 2 ports detected
    [ 1.756794] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 1.757624] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 1.757636] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
    [ 1.757651] ehci-pci 0000:00:1d.7: debug port 1
    [ 1.761541] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.761550] ehci-pci 0000:00:1d.7: irq 23, io mem 0x90b25000
    [ 1.770027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.770236] hub 9-0:1.0: USB hub found
    [ 1.770242] hub 9-0:1.0: 6 ports detected
    [ 1.793425] hub 6-0:1.0: USB hub found
    [ 1.793434] hub 6-0:1.0: 2 ports detected
    [ 1.816762] hub 7-0:1.0: USB hub found
    [ 1.816772] hub 7-0:1.0: 2 ports detected
    [ 1.840122] hub 8-0:1.0: USB hub found
    [ 1.840131] hub 8-0:1.0: 2 ports detected
    [ 1.896698] usb 1-1: new high-speed USB device number 2 using xhci_hcd
    [ 1.911468] hub 1-1:1.0: USB hub found
    [ 1.911627] hub 1-1:1.0: 4 ports detected
    [ 2.064043] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.074751] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.096814] firewire_core 0000:05:05.0: created device fw0: GUID 009027000228f4cc, S400
    [ 2.520099] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.520116] ata4.01: SATA link down (SStatus 4 SControl 300)
    [ 2.520129] ata4.01: link offline, clearing class 3 to NONE
    [ 2.526834] ata4.00: ATAPI: HL-DT-ST BDDVDRW UH12NS30, 1.00, max UDMA/100
    [ 2.540115] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.540132] ata3.01: SATA link down (SStatus 4 SControl 300)
    [ 2.540234] ata4.00: configured for UDMA/100
    [ 2.547003] ata3.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
    [ 2.547008] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.560344] ata3.00: configured for UDMA/133
    [ 2.560526] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    [ 2.562299] scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS30 1.00 PQ: 0 ANSI: 5
    [ 2.565388] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.565443] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.565446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.565469] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.569249] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.569254] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.569537] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.582466] sda: sda1 sda2
    [ 2.582770] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.763375] usb 6-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.186725] usb 7-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.373997] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.384911] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
    [ 3.384942] usbcore: registered new interface driver usbhid
    [ 3.384944] usbhid: USB HID core driver
    [ 3.389375] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input0
    [ 3.389518] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:1d.1-1:1
    [ 3.956744] usb 8-1: new low-speed USB device number 2 using uhci_hcd
    [ 4.193021] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
    [ 4.193111] hid-generic 0003:05A4:9881.0005: input,hidraw2: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:1d.2-1/input0
    [ 4.323187] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
    [ 4.323310] hid-generic 0003:05A4:9881.0006: input,hidraw3: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:1d.2-1/input1
    [ 11.876733] bio: create slab <bio-1> at 1
    [ 12.881119] bio: create slab <bio-1> at 1
    [ 13.707370] PM: Starting manual resume from disk
    [ 13.707375] PM: Hibernation image partition 254:2 present
    [ 13.707377] PM: Looking for hibernation image.
    [ 13.707685] PM: Image not found (code -22)
    [ 13.707689] PM: Hibernation image not present or could not be loaded.
    [ 14.046090] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 14.787445] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 14.788676] systemd[1]: Set hostname to <HTPC-Arch>.
    [ 15.226797] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 15.226858] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 15.226873] systemd[1]: Starting Remote File Systems.
    [ 15.227011] systemd[1]: Reached target Remote File Systems.
    [ 15.227023] systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
    [ 15.227118] systemd[1]: Starting Delayed Shutdown Socket.
    [ 15.227240] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 15.227251] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 15.227365] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 15.227375] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 15.227491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 15.227501] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 15.227623] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 15.227662] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 15.227875] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 15.227893] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 15.227935] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 15.227945] systemd[1]: Starting Paths.
    [ 15.228037] systemd[1]: Reached target Paths.
    [ 15.228050] systemd[1]: Starting Journal Socket.
    [ 15.228187] systemd[1]: Listening on Journal Socket.
    [ 15.249416] systemd[1]: Started Set Up Additional Binary Formats.
    [ 15.262084] systemd[1]: Starting Apply Kernel Variables...
    [ 15.262799] systemd[1]: Starting Create static device nodes in /dev...
    [ 15.263427] systemd[1]: Mounting Huge Pages File System...
    [ 15.263983] systemd[1]: Starting Setup Virtual Console...
    [ 15.264564] systemd[1]: Mounting POSIX Message Queue File System...
    [ 15.265156] systemd[1]: Mounting Debug File System...
    [ 15.280316] systemd[1]: Started Load Kernel Modules.
    [ 15.280348] systemd[1]: Mounting Configuration File System...
    [ 15.280921] systemd[1]: Mounted FUSE Control File System.
    [ 15.280939] systemd[1]: Starting Journal Service...
    [ 15.281676] systemd[1]: Started Journal Service.
    [ 15.281761] systemd[1]: Starting udev Kernel Socket.
    [ 15.281891] systemd[1]: Listening on udev Kernel Socket.
    [ 15.281945] systemd[1]: Starting udev Control Socket.
    [ 15.282059] systemd[1]: Listening on udev Control Socket.
    [ 15.282117] systemd[1]: Starting udev Coldplug all Devices...
    [ 15.282675] systemd[1]: Starting Encrypted Volumes.
    [ 15.282783] systemd[1]: Reached target Encrypted Volumes.
    [ 15.282802] systemd[1]: Expecting device dev-disk-by\x2duuid-0318dc88\x2d9059\x2d4a62\x2dbcff\x2d33265de192a4.device...
    [ 15.282920] systemd[1]: Started File System Check on Root Device.
    [ 15.282933] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 15.283591] systemd[1]: Mounting Temporary Directory...
    [ 15.420998] systemd[1]: Expecting device dev-disk-by\x2duuid-53882be2\x2d6e5d\x2d4f81\x2d8336\x2d8115b139229a.device...
    [ 15.422283] systemd[1]: Expecting device dev-disk-by\x2duuid-a510d99d\x2dd043\x2d415c\x2d9357\x2d87584ac75ce0.device...
    [ 15.753587] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 15.847848] systemd-udevd[185]: starting version 204
    [ 16.644359] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 16.644369] ACPI: Sleep Button [SLPB]
    [ 16.644450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 16.644454] ACPI: Power Button [PWRF]
    [ 16.751410] pps_core: LinuxPPS API ver. 1 registered
    [ 16.751415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 16.808340] media: Linux media interface: v0.10
    [ 16.812148] Linux video capture interface: v2.00
    [ 16.820027] PTP clock support registered
    [ 16.833228] ACPI: Requesting acpi_cpufreq
    [ 16.874833] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 16.874837] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 16.875034] e1000e 0000:00:19.0: setting latency timer to 64
    [ 16.875118] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 16.875143] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 16.914814] saa7164 driver loaded
    [ 16.916507] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
    [ 16.916513] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0x90000000
    [ 17.050022] saa7164_downloadfirmware() no first image
    [ 17.050682] cfg80211: Calling CRDA to update world regulatory domain
    [ 17.051569] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
    [ 17.187584] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:78:69:22
    [ 17.187590] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 17.187615] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
    [ 17.187944] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20130328/utaddress-251)
    [ 17.187951] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 17.187976] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 17.448874] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
    [ 17.481174] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 17.580464] saa7164_downloadfirmware() firmware read 4019072 bytes.
    [ 17.580469] saa7164_downloadfirmware() firmware loaded.
    [ 17.580471] Firmware file header part 1:
    [ 17.580473] .FirmwareSize = 0x0
    [ 17.580474] .BSLSize = 0x0
    [ 17.580475] .Reserved = 0x3d538
    [ 17.580477] .Version = 0x3
    [ 17.580479] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
    [ 17.580485] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
    [ 17.580486] saa7164_downloadfirmware() BSLSize = 0x0
    [ 17.580488] saa7164_downloadfirmware() Reserved = 0x0
    [ 17.580489] saa7164_downloadfirmware() Version = 0x1661c00
    [ 17.621991] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 17.694365] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
    [ 17.694422] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
    [ 17.694477] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
    [ 17.694908] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 17.694980] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
    [ 17.707929] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 17.907140] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907184] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907251] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 17.993729] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
    [ 18.040563] coretemp coretemp.0: Using relative temperature scale!
    [ 18.040576] coretemp coretemp.0: Using relative temperature scale!
    [ 18.100383] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [ 18.112063] iTCO_vendor_support: vendor-support=0
    [ 18.298748] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 18.298795] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
    [ 18.298917] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 18.520198] systemd-udevd[206]: renamed network interface wlan0 to wlp5s3
    [ 18.624855] Adding 10485756k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:10485756k FS
    [ 18.730190] systemd-udevd[200]: renamed network interface eth0 to enp0s25
    [ 20.673933] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 20.681617] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 20.855405] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 21.795385] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896764] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896898] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
    [ 22.415792] systemd-logind[284]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 22.415885] systemd-logind[284]: Watching system buttons on /dev/input/event3 (Sleep Button)
    [ 22.618057] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input9
    [ 22.619178] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input10
    [ 24.390026] saa7164_downloadimage() Image downloaded, booting...
    [ 24.493363] saa7164_downloadimage() Image booted successfully.
    [ 24.493397] starting firmware download(2)
    [ 26.916146] systemd-logind[284]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
    [ 27.103368] saa7164_downloadimage() Image downloaded, booting...
    [ 29.170040] saa7164_downloadimage() Image booted successfully.
    [ 29.170074] firmware download complete.
    [ 29.217377] tveeprom 9-0000: Hauppauge model 88061, rev C4F2, serial# 8524019
    [ 29.217381] tveeprom 9-0000: MAC address is 00:0d:fe:82:10:f3
    [ 29.217383] tveeprom 9-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
    [ 29.217386] tveeprom 9-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
    [ 29.217388] tveeprom 9-0000: audio processor is SAA7164 (idx 43)
    [ 29.217390] tveeprom 9-0000: decoder processor is SAA7164 (idx 40)
    [ 29.217392] tveeprom 9-0000: has radio, has IR receiver, has no IR transmitter
    [ 29.217394] saa7164[0]: Hauppauge eeprom: model=88061
    [ 29.865010] tda18271 10-0060: creating new instance
    [ 29.869343] TDA18271HD/C2 detected @ 10-0060
    [ 30.094538] DVB: registering new adapter (saa7164)
    [ 30.094548] saa7164 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 30.383509] tda18271 11-0060: creating new instance
    [ 30.387943] TDA18271HD/C2 detected @ 11-0060
    [ 30.457571] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 30.457682] e1000e 0000:00:19.0 enp0s25: Link Speed was downgraded by SmartSpeed
    [ 30.457685] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
    [ 30.457715] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
    [ 30.612017] tda18271: performing RF tracking filter calibration
    [ 32.898604] tda18271: RF tracking filter calibration complete
    [ 32.901771] DVB: registering new adapter (saa7164)
    [ 32.901779] saa7164 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 32.902195] saa7164[0]: registered device video0 [mpeg]
    [ 33.133183] saa7164[0]: registered device video1 [mpeg]
    [ 33.343857] saa7164[0]: registered device vbi0 [vbi]
    [ 33.343959] saa7164[0]: registered device vbi1 [vbi]
    [ 37.832133] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    [ 38.787420] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=0
    [ 39.333649] EXT4-fs (dm-3): re-mounted.

    I seemed to have solved this by following the advice in the Gentoo wiki:
    https://wiki.gentoo.org/wiki/Radeon#Audio_over_HDMI
    pcm.!default {
    type plug
    slave.pcm "hdmi"
    Those four lines in my /etc/asound.conf work. I'm not sure what the difference is between specifying "hdmi" vs the hardware device "hw:0,3".
    I still get no sound with `aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav` however, `aplay /usr/share/sounds/alsa/Front_Center.wav` works now. `aplay -D hdmi /usr/share/sounds/alsa/Front_Center.wav` results in an error/warning:
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    aplay: set_params:1239: Channels count non available

  • How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

    May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

    It Says :
    Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

Maybe you are looking for

  • Can't pair iPhone 5s with Macbook Pro via Bluetooth

    I have an iPhone 5s and Macbook Pro with retina display (running on iOS 8.0.2 and Yosemite respectively). For some reason, my iPhone can never see my MBPr but the MBPr can see the iPhone. Pressing the "Pair" button on in the Bluetooth setting panel i

  • How to display BMP image.

    Hai I have a problem in displaying bmp image and I came to know that BMP format is not supported by java se 1.4. How can i display the image? OR Is there any third party tool (open source) that can solve my problem Thank you

  • Is Organizer lousy vs. iPhoto or is just my ignorance?

    WIth all the good stuff packed into organizer as a data mangement tool for photo and film media files, I am astonished about the lack of 2 minor features, that would have given the application an A+1 from me. First I am sooooooo missing the GPS tags

  • How to quickly combine 2GB QT files for use in FCP Multiclip?

    We have 3 Focus FS-4 Pro 80GB HD units that work with 3 Sony DVCAM camcorders. We edit on FCP 5 and 6 on Quad G5s and one Intel G5 with Mac OS 10.4.11 and 10.5. We work in DV primarily. Recently, we began to do a large number of multi-cam programs wh

  • SM37 - Add a new step job to an existing Job

    I have created step job in SM37, Is there any way to add a new step job to this existing job.?