U2415, MBP Pro Thunderbolt 2 Multi-Stream Transport

Has anybody tried and successfully configured two U2415 with the latest Apple MBP Pro Laptops?
Apple say it should work on the latest models, but as long as I keep the DP1.2 option enabled, I just get a black screen (apple shows me that one display is connected). Any idea?
* What is the 20 digit alpha-numeric monitor serial number? CN-008dxd-74261-48u-4c9l
* What specific computer model? MBP 13/15" Q1 2015
* What operating system? Apple OSX Yosemite
* What video card? Intel Iris Pro Graphics and NVIDIA GeForce GT 750M
* Video card driver version? ????
* What video out ports are available on the video card? Thunderbolt 2 
* What video out port are you using from the video card to what video in port on the monitor?Thunderbolt 2 --> mDP to DP cable --U2415
* What cable are you using to attach the video card to the monitor? MiniDisplay to DisplayPort
* Was the monitor purchased from Dell or some reseller? Reseller

Dell does not test/validate this monitor model on apple proprietary hardware and software. We are not convinced that the apple computer thunderbolt port meets the standardized mDP/DP specifications. The most I can say is that the apple proprietary thunderbolt port is hit or miss connecting to our monitors simply using our mDP to DP cable. Some apple users have mentioned that using a thunderbolt to DP adapter or thunderbolt to mDP adapter has had better results. Ask the apple users on their forum where to purchase one.
apple thunderbolt out --> thunderbolt to DP adapter --> Dell DP to mDP cable --> Dell monitor mDP in
apple thunderbolt out --> thunderbolt to DP adapter --> DP to DP cable --> Dell monitor DP in
apple thunderbolt out --> thunderbolt to mDP adapter --> Dell mDP to DP cable --> Dell monitor DP in
apple thunderbolt out --> thunderbolt to mDP adapter --> mDP to mDP cable --> Dell monitor mDP in

Similar Messages

  • Macbook pro thunderbolt to Imac Mini Display Port

    Hello everyone,
         As the title above says I would like to use my Imac (27 inch, Late 2009) as a moniter for my Macbook Pro ( 15 inch, Early 2011). As you may know Macbook Pro has a Thunderbolt port on it and I was wondering if it is compatable to go to my Imac's Mini Display port?
    Thunderbolt > Mini Display Port ( Use as moniter not data trasnfer )
    If anyone can sheed some light on this area I would be very thankful!
    Cgrichyrich

    dsimagry, Mark wasn't asking about a Mid 2011 iMac, he was asking about a mid 2010 iMac with a 2011 MBP. That link is not applicable.
    Mark, I have a similar setup (same iMac, 2012 MBP with thunderbolt) and have been working on it for a while. While the Thunderbolt ports are supposedly backwards compatible with the Mini DisplayPort interface, a bunch of reading (and an experimental purchase (and subsequent return) of a $70 Thunderbolt cable to try it out) indicates that you can't do that with a Thunderbolt cable but that a Mini DisplayPort <--> Mini DisplayPort cable should work.
    As I'm in Canada, it's been a right pain to get one of those (less selection on our Amazon than yours) but I finally got one and only just tried it out this morning. It _DOES_ work, but there are some display refresh/jaggies issues on the iMac. I don't know if that's maybe because the MBP is running on battery at the moment & doesn't have enough power to consistently drive the larger display or whether there's something else wrong, but I'll be spending the remainder of my long weekend trying to figure that out. The issue is that any mouse movement on the screen causes bands of what looks like loss of frame sync 'static'.
    I'll let you know here if what I eventually figure out. On the up side, this is by FAR the closest I've gotten so far.

  • Is there a way to roll ab roll and cut between the two as in final cut pro which has multi clip

    Is there a way to AB roll as in Final Cut Pro which has multi cut

    There is another workaround that enables you to see 2, 3 or 4 videos simultaneously and make decisions about where to cut from one to another.  It's not the exact same thing as FCP's multiclip feature but it does work.
    Download & install Piero's QuarterPIP filter.  Place each of your videos on a separate track (up to 4).  Apply the QuarterPIP filter to each, placing each video on a separate quadrant of the canvas.  (You may have to sync their placement on the track if there is common audio among them.)
    You can then play the timeline and see all 4 videos simultaneously in the Canvas.  You can then place markers and make cuts & deleted unwanted portions of selected tracks as desired.  The limitation is that you can't just cut from one track to another on the fly as you can in FCP - you have to actually cut & delete the portions of the video tracks that you don't want in the final video.
    When you are done you can remove the QuarterPIP filters and will be left with one resulting video.

  • Smart audio multi stream

    hello
    I have a t400 thinkpad. I choose the multi stream option in the smart audio softwere but still only the external (connected via the headphone jack) work. the internal speakers of the laptop do not produce any noise. As I understood the multi stream option suppose to enable both internal and external speakers.
    Can anyone help? I really want to use both at the same time... 
    PS: when I press the red and blue play demo buttons on the smart audio (multi stream) page I can hear the demos on both internal and external speakers , but in winamp and all other sounds I can only hear in the external speakers.
    Thank you

    Hello.
    So how do I take advantage of this feature? I want to play music through the mini-jack port and play youtube video through the internal speakers. Before somebody asks why, it's so that two people can use the computer at once. One can watch youtube and the other can listen to music. If it's possible, please step-by-step instructions. I have played around with the SmartAudio software and read the shoddy help file, and not had a clue as to why they would show this feature only to play two pre-recorded sound files. 
    Thanks in advance

  • Enable Multi Stream ICA parameter in WAAS(5.1.1c)

    Hi all!
    I have questions about the settings of Multi Stream ICA(MSI) in WAAS (ver 5.1.1c).
    (1) Setting Parameter
    * Enable only the parameter "Enable Multi Stream ICA" ?
    * Is there other parameter for such quality of service(QoS)?
      We should set the parameters in WAAS?
      We don't have the information of how to set it and the meaning.
    (2) Impact when enabling "Enable Multi Stream ICA"
    * In our network, ICA stream go thourgh WAAS, but not MSI. If we enable MSI parameter, do outages of current ICA stream happen?
      If so, the outage means "connection failure happens"?
    Regards, Satoshi

    Hi all!
    I have questions about the settings of Multi Stream ICA(MSI) in WAAS (ver 5.1.1c).
    (1) Setting Parameter
    * Enable only the parameter "Enable Multi Stream ICA" ?
    * Is there other parameter for such quality of service(QoS)?
      We should set the parameters in WAAS?
      We don't have the information of how to set it and the meaning.
    (2) Impact when enabling "Enable Multi Stream ICA"
    * In our network, ICA stream go thourgh WAAS, but not MSI. If we enable MSI parameter, do outages of current ICA stream happen?
      If so, the outage means "connection failure happens"?
    Regards, Satoshi

  • T520 Beta Sound Driver doesn't support multi stream output with docking station

    I always used (and loved) the ability to use the laptop speakers and the headphone jack as independend outputs. For Windows 8 it doesn't work. Neither Win8 beta driver nor the latest Win7 driver brings this feature to Win8.
    The option for Multistream is still selectable in SmartAudio. Selecting this option makes Win8 installing some things but doesn't actually make MultiStream work 
    Hope this is just because of the drivers beta stage...
    Solved!
    Go to Solution.

    The new audio driver for windows8 brings back the multi stream output. It also fixes the crash on selecting VoIP-Settings in SmartAudio application Driver is here.

  • Adobe Premiere Pro Help | Editing multi‑camera sequences (CS6)

    This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/editing-multi-camera-sequences1.html

    According to the tutorial at http://www.video2brain.com/en/videos-13067.htm audio now defaults not to Track 1 of the source sequence as it used to, but to the video first selected when choosing between the multiple cameras.
    I understand TimB was wishing to mix audio in the audio mixer in the source sequences and apply that to the multicam sequence without export audio and re-importing.
    According to my notes to self in June 2012 when I used CS6 to do a multicam project, I wrote:
    “To enable audio for all cameras, right click on the Source Sequence and ‘Open in Timeline’
    Enable all the audio tracks you want.”
    And that was all.
    However the PremPro instructions for CS6 says:
    Enabling audio in the multi-camera source sequence
    By default, Premiere Pro only enables audio channel one in the multi-camera source sequence. For multi-camera editing workflow, enable each audio track manually before editing the target sequence. To enable audio tracks for the multi-camera source sequence, do the following:
    1. Open the multi-camera source sequence by selecting the multi-camera source sequence icon in the Project panel, right-click
    (Win) or Ctrl-click (Mac OS) the icon, and then choose Open In Timeline.
    2. The Timeline opens. Select the audio tracks, and then enable the other audio tracks by clicking the Toggle Track Output
    button for each audio track.
    3. Now that all audio tracks are enabled, you can close the sequence
    This is how I remember it but it doesn’t gel with TimB’s post. There are two sections in the Help pdf, one for CS5.5 (and I think CS5) and a separate one for CS6 as quoted above.

  • Custom Streaming Transport Settings

    I can't get QT preferences to retain custom settings for Streaming Transport. I need to see if I am receiving stream via http port 80 or UDP 554. Each time I change and apply settings then close the window, re-open preference the streaming Transport is re-set to automatic
    I have Windows version of QTPro 7.04

    My location: at work:
    If you are using a workplace computer on a local network this may well be the case. A Firewall blocks out all Internet traffic except those services that local network administrators consider essential. You will need to contact your local network administrators and have the University's streaming server included in the acceptable services. There's an adminsitrator's guide to allowing streaming Quicktime through a firewall <a href "http://www.apple.com/quicktime/resources/qt4/us/proxy/proxy.html">here. To check to see that you can access any streaming movie, open the Quicktime Player and clicking Edit > Preferences > Quicktime preferences > Streaming transport. Click the Auto Configure button. Quicktime should confirm that it can use UDP/RTSP port 554. If it switches to http:// port 80, then you are most likely behind a firewall that is configured to block Quicktime streaming files.
    My location: at home:
    If you have a DSL router with a NAT firewall you will need to configure it to allow streaming media files. Open the Web-based interface for the router, select Advanced and choose "Port forwarding" (wording may differ for your router). Open port 554 for RTSP/TCP data and ports 6970 through 6999 (inclusive) for RTP/UDP data. Consult your router's documentation for specific instructions on configuring port forwarding, or contact the router vendor. To check to see that you can access any streaming movie, open the Quicktime Player and clicking Edit > Preferences > Quicktime preferences > Streaming transport. Click the Auto Configure button. Quicktime should confirm that it can use UDP/RTSP port 554. If it switches to http:// port 80, then you are most likely behind a firewall that is configured to block Quicktime streaming files.

  • HT4463 Recent MBP Pro Retina purchase, Garage Band "registry error".  Uninstall and reinstall help.

    Got an MBP Pro Retina recently, Garage Band is not working and is stating a potential "registry error".  I'd like uninstall and reinstall. However, I am unable to redownload the dmg. Help?

    It's ok I've done this numerous times. Drag the iLife app to the trash. Enter your passward. Now refresh MAS and you'll see installed changes to install because MAS doesn't see it anymore. You can now click to redownload that App again.
    You don't have to empty the trash btw just yet, that way you can always redo the original from the trash if you really want to. Maybe that will make you feel a little easier now.
    Let us know how it goes.

  • 2 weeks trying to find out how to use the media live encoder in multi stream. And  I can not find an

    2 weeks trying to find out how to use the media live encoder 3.2 in multi
    stream. And  I can not find any clear instructions guide. Please from
    my soul, taught me clearly, how  I can stream to 2 different site
    using live media encoder. what I do with ftml values and the other
    one , wich everyone site give me, where should I put them, in what
    order ... everything I tried, I got an error. I realy please you,
    please !!!! thanks in advance !!

    [Moved to Flash Media Live Encoder forum.]

  • Does anyone know how to put 6 windows in premiere pro cc  for multi cameras,  for 6 cameras actually

    Does anyone know how to put 6 wndows in premiere pro cc for multi cameras, for 6 cameras actually.

    The workflow that Jim spelled out is for doing what's called a "multi-cam edit." This allows you to conveniently switch among different video clips, often from multiple cameras that shot the same performance or event. The end result is a segment where only one clip is visible at a time.
    The way I read your question, what you want to do is show six clips all at once, which is typically referred to "picture in picture." To do that, follow the first 3 steps Jim provided. (By the way, in Step 2, the key is to stack the clips on six different tracks, as opposed to lining them up head-to-tail.) Then select each clip in turn and use the Position and Scale controls in the Effect Controls Panel to shrink it and move it where you want within the frame. Here's a tutorial video on this workflow: http://tv.adobe.com/watch/adobe-beginner-classes-with-dennis-radeke/episode-7-adobe-premie re-pro-picture-in-picture/.

  • MBP Pro wifi keeps dropping

    The wifi on my MBP Pro Retina (Mid 2012) - (16GB, 2.6GHz i7) keeps dropping.  I have to disable and enable the wifi and it continues to work for a while.  The latest OSx patch 10.10.1 helped for a while but the problem is back and it is even more frequent.
    I have been following this online and have tried many ideas suggested online and none seems to work.
    Thank you in advance...
    PS. I use a apple bluetooth keyboard and mouse and have multiple screens connected to the laptop (i.e. the laptop much more like a desktop) and all patches through AppStore are installed.

    Try following
    Goto System settings network -->  options --> WLAN/Wifi --> change your Wifi to top
    Find out which DNS is best for your Wifi by installing and running namebench (Link: https://code.google.com/p/namebench/)
    Change your WiFi DNS to that result (Goto System settings network -->  options --> DNS --> DNS-Server)
    Last (wait to) install OS X 10.10.2! I'm using the beta and that fixes the issues on my old router.

  • [svn] 3486: Updates to support reliable messaging over streaming transports .

    Revision: 3486
    Author: [email protected]
    Date: 2008-10-05 12:51:04 -0700 (Sun, 05 Oct 2008)
    Log Message:
    Updates to support reliable messaging over streaming transports.
    QA: No
    Doc: No
    Checkintests Pass: Yes
    Details:
    Unbind subscription invalidation from streaming connection close. New behavior is for subscription invalidation to be bound to session invalidation, in the same fashion as simple polling or long-polling works.
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/client/EndpointPushNotifier.java
    blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

    nokia will have this on there NSU by end of month or into next month.
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

  • I am setting up my new MBP Pro with Retina with Time MACHINE

    Brand new MBP Pro with Retina   I have an existing wireless network do not have an ethernet connection to plug the time machine into.  Its int the attic
    Having issues with this.
    Would love some simple step by step directions
    When I tried to set it up it wanted to create a new network.  Don't want that.  I want to be in the existing network.  
    Thanks in advance 

    If you want to back up a computer running Yosemite just at this point in time.. I would buy a USB drive and plug it into the laptop and use that as the backup target..
    It is simple and is likely to work just fine.. you can leave the USB unplugged and just do the backup once  every few days.. when you plug the drive in.. a small 2.5" 2TB will self power from the USB on the Mac and is fast and very convenient.
    I suggest that only because it is so much harder to get Yosemite to work on the TC.. and if you have it plugged in remotely.. it can be most unreliable.
    A tech cannot really help.. this is an OS problem.. he can set it up to run perfectly and it will fail the next day. Apple need to come out with some fixes.
    For now.. if you want to have a go.. please just go and plug the TC into your router. Use ethernet.. plug it WAN port of the TC to the LAN port of the router.
    WAN on TC..
    Read the apple setup info.
    http://manuals.info.apple.com/MANUALS/0/MA428/en_US/TimeCapsule_SetupGuide.pdf
    Run the setup wizard in the airport utility.. on iOS device like ipad is often better than computer running Yosemite..
    It should pretty well set itself up.. you can then setup Time Machine.. on the computer which again should be able to find and use the TC without issues..
    Tell us if you run into trouble and we can give specific help.

  • Mbp pro retina 13" after installing mavericks keeps fans running in sleep mode.

    Hi. my Mbp pro 13" retina keeps fans running in sleep mode, tried to reset smc but not helping. So maybe someone have some solutions?

    Information.
    Fans – Monitor Computer Temperature – iStat Pro (widget)
    Fans – Operating Temperature

Maybe you are looking for