U2515H, mac book pro, no USB devices seen?

Hi I cant see on my mac book pro any of my devices connectted to teh USB ports on my new U2515H - help?

Dell does not test/validate this monitor model on apple proprietary hardware and software. Per the User's Guide, did you plug the monitor USB upstream cable into the monitor bottom USB upstream port and the other end into a USB port on the computer? If yes, the computer should have notified you that "new hardware" was found.

Similar Messages

DO I NEED AN ADAPTOR TO PROJECT FROM MY MAC BOOK PRO OR USB CABLE IS ENOUGH?, DO I NEED AN ADAPTOR TO PROJECT FROM MY MAC BOOK PRO OR USB CABLE IS ENOUGH?

MY MAC BOOK PRO OR USB CABLE IS ENOUGH?, DO I NEED AN ADAPTOR TO PROJECT FROM MY MAC BOOK PRO OR USB CABLE IS ENOUGH?

What do you mean "project"?
What are you trying to accomplish?
BTW, typing in all caps indicates shouting, is considered rude, and is difficult to read.
Many simply do not read such posts.

DNP DS80 printer to Mac Book Pro via USB

I have a DNP DS80 photo printer that I was told cannot be used with Snow Leopard because of the interface issue with USB devices on Mac Book Pro. I upgraded from Tiger to Snow Leopard recently, and after it the print link to Mac Book Pro was disabled. Can anyone help?

Dave, Thanks for your kind reply. I found out that Apple does not support this printer yet. Meanwhile, I have to downgrade my OS from Snow Leopard 10.6.8 to Leopard version 10.5.6. I need help with this downgrading process because when I load the disk for OS 10.5.6 (Leopard) the message comes up telling me that I cannot load this software in my laptop (Mac Book Pro). I don't know if I have to erase Snow Leopard before loading Leopard, or do something else. I have to tell you that the Leopard disk did not come with Mac Book Pro (it's original OS was Tiger), it is the disk for my iMac G5 and I wonder if it can be used for the laptop. Can you advise!
Gene

How to use multiple midi controllers with Mac book pro (2 usb)?

I have a newer macbook pro that has 2 USB ports, and a lightning port and a firewireport.
On stage I will be using the firewire port connected to a Presonus Firestudio mobile to use as the interface to the house mixer.
I will use 1 USB for my M-audio Axiom 61
I will use the other for my Yamaha WX-5 Wind synth
I'd like to be able to get the apogee midi foot controller to control the playback audio. For example I'll be using it to stay in a solo section, then step on it to move it forward ot the next section when I am done soloing
I'd also like to use some sort of midi switch to turn on vocal effects of the mic.
Anyway since I only have 2 USB ports, how should I connect the 3rd, or 4th USB midi controller?
Will a USB hub work to do this? If so, will I always have to remember to use the same controler in the same exact hub input to make sure everything maps the same?
I guess I'll also have to learn how to setup multiple controllers in Mainstage as well.
Thanks
Dan

Hi there,
is a question which many of us have spent ...
I think the obvious answer is that yes you can use a hub and connect everything. however ....
sincerely advise you to buy a good hub that is well feasible, the last thing you want on stage / rehearsal is one of midi controllers stop responding, or stay with hanged notes... etc., do not buy just because it is cheap it has to be stable and viable, some bring cable for connecting wall power just to not drain power from the USB port.
Other things to try is to distribute as much equipment for USB / Midi.
For example one of midi controllers connect via USB but not by Midi outside the Presonus Firestudio. Connecting Presonus Firestudio to a single USB port as it is a main equipment.
but it really is an issue that greatly limits the use of USB devices.
Try it and tell me how it went. Good luck
(sorry for my english i´m Portuguese)

HT3669 Epson SX 535WD Unable to send scans to Mac Book Pro via USB from Epson Printer screen?

Hi,
I have recently updated to mavericks, I am having porblems opperating my Epson sx 535wd scanner? The printer side seems to work fine!
I have downloaded the latest software form the EPSON www site however I am unable to download the Scanner drivers as my Mac tells me it doesn't reckognise the developer?
Do I change the gate keeper settings on the mac to allow this software to be installed or not? (This was recomended by EPSON? )
Also I have some old Epson software Circa 2012 on my Mac , I asume this is no longer required so can I remove it or would that affect the printer?

The problem I'm having is that I can not seem to access the Epson 1280 from my Dell PC, nor can I access the files on the PC via my Mac Book.
I suggest that you check out the following iFelix articles to see if they will help:
- Printing to a printer on an Airport Extreme Base Station or Airport Express from an XP PC
- Sharing files between a Windows XP PC and a Mac running OS 10.4.x

Can you connect the TC directly to a Mac Book Pro thru either USB or Ethernet?

Can you hook a Time Capsule directly to a Mac Book Pro thru USB Port or Ethernet or?
So that you can speed up the transfer time??
It's so slow compared to directly connected FW800 and Thunderbolt Drives...
It's painful...
Thanks

Ethernet, yes. Connect the Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule. This should be 4-5 times faster than wireless. Be sure to turn off wireless on the Mac.
USB,no.

Im going miss old mac book pro

I'm going to miss my old MacBook Pro I remember the first day I got it to the last time I used it it made me feel like I could do anything 9 years I thought id get 12 years out of it I'm truly going to miss my old laptop but I know it's time to move on it's not easy when you have a laptop for 8 years I'm just going to keep it maybe someday I don't know when someday maybe should I go up to a recycle center try to find parts?I'm sad but happy at the same time voice over was my favorite feature fn for it seems like yesterday when I first opened itI remember using it throughout high school it would always would help me be there for me when I needed it I guess in a way it was like a teacher to me a friend someone I can depend on I wish I had a few more year with my Mac book pro I just never seen that the money fix it

I. honestly believe the laptop was. ahead of its time at the time my friend Alex was vision impaired I remember to turn on voice over and she was a little bit small sentence this laptop is cool with the light up keys to help her with the zoom in screen that's what made me want to be more of an apple and owner gived me hope

Mac book pro don't recognize usb 3.0 devices after installing ntfs-3g

I have installed OS X Mavericks after deleting everything in the hard drive (i.e. complete new installation). It should work fine, nevertheless the problem persist, in my case my mac book pro doesn't recognize a nexus 4 conected to the USB port, but before installing the ntfs-3g software the mac book recgnized that device. So I don't know how to resolve this problem because it hadn't solved even doing a completely new installation of the OS X Mavericks.

I had a similar problem that arose because Apple over-rode the original USB drivers with a kernal extension.
UNloading the extension fixed my problems. Perhaps it will help you.
In a terminal, type this:
sudo kextunload -b com.apple.driver.AppleUSBFTDI
If it solves your problem, keep in mind you'll have to do it after every reboot (a good use for command line history.)
If it doesn't, you can put it right back with this:
sudo kextload -b com.apple.driver.AppleUSBFTDI
Hope that helps. I should also warn you that in my experience, 10.9.3's USB performance is terrible.
--Ben

How do I Install Windows 7 on Mac Book Pro via a Bootable USB Drive

Hi Guys,
I have a Mac Book Pro 13 inch, Early 2011 Processor 2.3 GHz Intel Core i5 (I initially had OS 10.5.8 which I upgraded to OSX 10.9.4 a few months ago).
When purchased it, I installed Windows via Super Drive (that being the only time i ever used the super drive). My Windows got corrupted for some reason 2 months ago. Hence, I removed the windows via Bootcamp to perform a fresh install. I discovered my Super Drive was no longer working.
Thereon I have been trying to install Windows via a bootable USB Drive but am failing to do so. After going through several forums, I have reached the following stage.
1. Created Bootable Windows USB Drive using Windows USB (http://www.wikihow.com/Create-a-Bootable-Windows-7-or-Vista-USB-Drive). Have used this USB drive to install windows on a DELL Computer
2. Bootcamp wasnt creating a partition for windows since no Windows Installation disc was being detected in super drive. (Solved it by downloading Toast Titanium and loading the .iso file on a virtual drive).
3. Boot menu was initially not detecting external drive, so installed rEFIt - An EFI Boot Menu and Toolkit. Now it is detecting the USB Drive.
Now when I boot from this device, it get a black screen with the message "No bootable device - Insert Boot Disk"
Request someone to please help me install windows as some softwares which I work with are windows based.

smartestidiot wrote:
So my understanding is that my Boot Camp Assistant (BCA), since it does not allow USB installer, it sets NVRAM to boot from Optical Drive. Right?
Yes.
So can I change it or update it to another BCA version which supports the same??
All BCA versions drive the logic based on the Mac Model Identifier. Unfortunately there is no real workaround. .
Please see https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Early+2011+Optical+Driv e+Replacement/5122
and https://www.ifixit.com/Store/Mac/Unibody-8x-SATA-SuperDrive-Post-Early-2009/IF16 1-073-2.

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

HT4061 iTunes will not open when my iPhone 4S is attached to my Mac Book Pro. iTunes will start up but as soon as my iPhone appears in the list of devices the program then quits and displays the message 'iTune Quit Unexpectedly'? Can anybody help?

The Problem/s
1. I am unable to sync my iPhone 4S with my Mac Book Pro, either by cable, wifi or bluetooth
2. iTunes will initiall open and briefly identifies the iPhone in the Device section in iTunes.
3. When iTunes starts to read the iPhone (displaying the spinning wheel), it immediately then quits and
4. Opens a 'dialogue box' which displays the message "iTunes Quit Unexpectedly"
5 The dialoge box offers the following button options to:-
'Show Details'
The 'Show Details' button will open and display a list of the 'Problem Details and System Configeration'. To the average user the information is useless, as one doesn't know what to look for to solve the problem. This is a long and detailed report (too long to include in this message), which includes information such as:-
Crashed Thread: 20
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000000006f0
'OK'
The 'Ok' button simply quits and closes the dialogue box
'Reopen'
The 'Reopen' button will again reopen iTunes, briefly showing that it is trying to read the iPhone in the Devices section, but then returns again to display the same dialogue box.
Other Information
1. iTunes will still start normally once the USB cable is removed from the Mac book Pro, but crashes again once the USB cable is reattached to the computer
Any advice or help offered would be greatly appreciated.
Sincerely
Rob
Message was edited by: Robmanrico

Hi there anaqeed,
I would recommend taking a look at the troubleshooting steps found in the article below.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

Are the two USB3 ports on a Mac Book Pro independent channels of USB?

Are the two USB3 ports on a 15" 2012 Mac Book Pro independent channels of USB? If I plug a USB2 device into one of the ports, does it slow the other as well?
Thanks
MtD

Thanks - according to this Apple KB article:
http://support.apple.com/kb/ht5172
plugging in a USB 2 device into the USB3 daisy chain slows all devices on that chain to USB2 speed.
What I am trying to find out is if the two ports on the side of the MacBook Pro are independent channels of USB, so that you could operate with a USB2 device on one port and still obtain USB 3 speeds (with USB3 only devices plugged in) on the second port.
MtD
Message was edited by: Meg The Dog to fix typo

How do I dissable write permissions to USB ports in Mac book pro

I need to dissable write pemissions to USB ports for Mac Book pro, In this I need to access data from data storage devices to system, I dont want to move data from system to data storage devices like pendrive. please reply me as soon as possible.

You can use VLC to play avi movies.

How do i transfer data from my usb to android phone on mac book pro

Hi,
I cannot transfer data from my usb to my samsung galaxy note on mac book pro.Please help me solve this issue.
Thanks
Arshad Azeez

What are you trying to transfer? What does the manual say for the Samsung to get whatever data it is that you want to transfer from one device to the other? This may be something you want to ask in a Samsung forum, since you are trying to manipulate a Samsung phone.

I have a HD video clip (MPEG 4), able to watch in VLC in my Mac-book-pro, but not in Quicktime player and FCP X - just seen as full green. Help please to view in FCP X by changing the format or what ever thats required.

I have a HD video clip (MPEG 4), able to watch in VLC in my Mac-book-pro, but not in Quicktime player and FCP X - just seen as full green. Help please to view in FCP X by changing the format or what ever thats required. Thank you.

Thanks for your reply. This video was recorded by my own professional camera, Sony PMW EX 3, two years back. But I am neither a professional cameraman nor an editor. I am just like a beginner in both. I didnt have space in my storage device, so I just copied all my clips, thinking I can edit it latter, without recompressing or editing or whatever I should have done it at that point of time. Now I need to edit it and use it in my profession. I am very upset. Please help me in going step by step to get it in FCP X for editing. Also I would like to know, do I need to buy the Compressor 4 for any reason. I dont mind in buying, if you think it is going to be useful for some reason. Thank you very much in anticipation for any kind of proper guidance.

U2515H, mac book pro, no USB devices seen?

Similar Messages

Maybe you are looking for