U310 screw kit part number

HI,
I am planning to upgrade HDD in my u310 to solid state drive. Service manual says I cannot reuse the screws, I contacted Lenovo parts dept to get the new screw kit, they want part number to order the screw kit, technical supprt says they don't have the part number. Can someone please help me to find the part number of screw kit, even better if I can order online.
Thanks!

I dont know if its the same as with the U410, but the screws are defenietly reusable there. Imho a laptops inside got nothing to endure, so no worries reusing screws there.

Similar Messages

  • W700 LCD bezel screw caps part number?

    Hi everyone,
    I've had the LCD screen replaced in my W700 recently. One of the plastic square screw caps that mask the bezel screws is peeling off however (it seems they don't like being re-used). 
    I've looked in the Hardware Maintenance Index PDF but can't seem to find the part number to re-order the screw caps so I can just stick a new one on (I presume it's a CRU part given how easy it is to install by the user).
    Can anyone here (Lenovo staff or otherwise) tell me what part number I need? As far as I can tell the W700 screw packs don't contain these screw caps. Maybe it's part of the LCD screen bezel? 
    I just want to get someone at Lenovo to pop some in an envelope for me, first thing's first though is the part number.
    Many thanks all,

    If you need the square caps for the LCD bezel you can order the screw kit 60Y5510. It's normally for T510/W510 but the caps are the same. The only difference is the number. TheW700 has 6 screws, T510/W510 just 3. But the kit might have enough caps.
    Hope this helps.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • On the connector block CB-68LP, there are few screw terminals. I am trying to find the maker and the part number of this screw terminal. Any help is much appreciate​d.

    I am designing a new product to use in our environment and I am trying to go from the I/O card to the PCB eliminating the connector block. For this purpose, I need to find out the screw terminal part number as well as the makers name. Please help.

    The screw terminals are made by Phoenix:
    The 14 screw terminal row is P/N 18-69-33-4
    The 12 screw terminal row is P/N 18-69-31-8

  • Need hard drive screw part number for T500 please

    I want to buy a spare screw for the screw used to screw the hard drive cover to the base of my T500 notebook.
    Where is it possible to find the part number so I can buy this??
    What IS the part number/name I should use??
    Perhaps someone knows the specific size/dimensions/etc. required to buy an off-the-shelf screw??
    I tried calling support but there is no way to speak to a human to explain what I'm looking for, which is unusual and specific.
    Thank you, Tom

    Hi tlyczko,
    The part number for the screw set is listed in the Hardware Maintenance Manual. You can buy them here.
    Hope this helps, and come back and tell us how it goes!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Need the screw model and number

    I am needing to get replacement screws for the above referenced laptop.  My laptop is missing the two screws at the back of the laptop securing the base to the remainder of the device.  I have seen so many different "screw kits" but would like the precise part number from someone so i can ensure I order the proper product.  Thanks in advance for any help on this one.

    Well, first of all if those screws have come loose there is a reason for it and it is likely to be the screen hinges. So just replacing the screws is not likely to do much and in fact the screwholes are very likely stripped. Having said that, this is the description of the case screws including the two you are asking about:
    seven Phillips PM2.5×5.5 screws (2) in the that secure the base enclosure to the computer.
     Here is a bag of 50 for sale on amazon.com.
    http://www.amazon.com/M2-5x5MM-PM2-5X5-0-notebooks-Alienware-LaptopScrewsDirect/dp/B00BW3QRD8
    They mention a seller or manufacturer called laptopscrewsdirect.com which might be worth trying to find to see if you can buy a smaller portion of them. 

  • Mid-2010 MacBook Pro 15" 2.8 GHz Logic Board Part Number

    Hi all,
    I have been searching for a few hours trying to find the part number for the logic board one of my MBPs.  I, unfortunately, have the Mid-2010 15" MBP with the bad GPU that results in endless kernel panics.  (I also had the first Pentium chip, the pentium 60 with the floating point error in 1995 too).  I upgraded the MBP to the 2.8 GHz, core i7 (2 core) processor when I ordered it in 2010.
    Anyway, the apple tech guide exploded view does not show the part number for the 2.8 GHz.  It only shows the part numbers for the other 3 configurations - 2.4, 2.53 and 2.66.  I took the cover and discovered my my EEE code is "QAG".
    I have just started trying to figure this issue out (too much time has passed and Apple will charge me to fix).  I want to try and find a replacement logic board and do it myself.   Does anyone have an idea what my part number is for the logic board?  None of the sites I searched have a 2.8 GHz board listed just 2.66.
    An alternative question - In my PC building days, some motherboards were compatible with multiple speeds of main processors.  My computer model number
    MC373LL/A
    is the same as the 2.66GHz model.  Does the 2.66 GHz logic board support the 2.8 core i7 too?  I don't want to screw up and order the wrong part.
    OSX Yosemite is installed.
    Thanks,
    Tony

    http://www.powerbookmedic.com/MacBook-Pro-15-Unibody-28GHz-Core-i7-Logic-Board-p -36842.html

  • What part number for storEdge power cables?

    I purchased a used StorEdge cabinet like the one pictured below.
    [http://imgur.com/kdnNM.png]
    No cords were included. I'm wondering:
    1. What part number is the external power cord? (red circle)
    2. What part number(s) fit the internal power connectors
    3. Would the power output of the internal connectors be sufficient/correct to distribute power to various non-sun servers?
    4. What is the purpose of the connections in the blue circle
    Thank you in advance for your help.

    You are welcome.
    This is peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP.  I suggest contacting HP Customer Service to see if the part is available.  I couldn't find it anywhere.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • DC Power Jack part number Satellite M105-S3041

    Greetings,
    My Toshiba laptop (M105-S3041) seems to be having a lot of problems with the power.
    My OEM Power adapter broke and i bought a replacement (non OEM) from ebay.
    That has been working fine till about a month ago I started having problems charging my laptop.
    I believe the power adapter is working fine (as the light on the adapter lights up) and I may be having a problem with my power jack.
    I have been searching for the model / part number for the DC Power jack without any luck. Would someone please help me out with the correct model/part number, where to buy and the approximate price for it?
    Secondly, does anyone know if the power jack is plug 'n' play or does it need to be soldered into the mother board?
    I have been pretty good at dis-assembling the laptop and putting it back together (except for one damn screw that does not agree to come off, I will probably saw that guy off).
    Thank
    Ajay

    Hi
    Im not quite sure but I think the DC-in socket is soldered to motherboard.
    In such case it would be tricky procedure in order to replace this.
    But it seems that you are not 100% sure that this part malfunctions.
    It could be also the AC adaptor issue as you said, you bought an not original part.
    Its just a suggestion but I would try to replace the AC adaptor with an Toshiba recommended one before trying to disassemble the notebook and to replace the DC-in socket.
    PS: All parts can be ordered from local Toshiba ASP!

  • Assembly part number for individual PXI chassis slot blockers?

    I need the individual assembly part numbers (not the catalog or packeaged kit number) for the standard 3U PXI chassis slot blockers.  The ones we have accumulated are stamped with the part numbers below but I need to know if this is the part number for the "assembly" with fasteners, or just aluminum plate.
    1 slot   185365C-01
    2 slot   185365C-02
    4 slot   185365C-04
    also is there a there 3 slot available (perhaps a -03)?
    Thanks,
    Darrow

    Hi Darrow,
    The part numbers listed above are indeed for the plates. Those three sizes are the only ones available through National Instruments; unfortunately there is no three-slot plate.
    Best regards,
    Tim

  • I need to know what the part number is for a replacment hard drive chasis - 8460p

    I need to order a replacment chassis that the hard drive screws into for the 8460p, does anybody know the part number for this piece?

    Hi:
    You are going to have to contact HP for that--1-800-334-5144.
    The only parts listed in the service manual are for the actual hard drives.
    Paul

  • What is part number number for 19" rack mount on 526 controller

    I am looking for part number for the rack mount kit for a 526 conbtroller - nono is listed on the price sheet

    Check out this discussion:
    https://supportforums.cisco.com/message/3077633#3077633
    Marcos

  • Adding a secondary hard drive to P300 SFF- bracket part number?

    Hi, 
    I have recently purchased a Lenovo Thinstation P300 SFF configured with a single SSD as primary drive and no optical drive. I would like to add a secondary hard drive (for backup purposes) and to adapt 5.25" drive space to 3.5" hard drive size. I presume there is some sort of a bracket that can do this, I need this part number. Any help appreciated. Here is a photo of current configuration http://pho.to/8Nb02

    Yeah I don't see that first PN listed at all, and that second PN provided is definitely just a bezel for the front of the system.
    I'm still looking into this as the documentation I have isn't fully clear, but I think the FRU you need is 04X2310.  From what I can tell, this should come with the 2.5" HDD bracket, 2.5" HDD tray, and screws (if they are needed)
    I'm almost wondering if somehow during the communication about ordering parts if the FRU number didn't get a couple of digits transposed or something.  I don't see 04X2301 as a valid part at all for what you're doing, but 04X2310 should be the right number.

  • What is the correct part number for dvi to vga adapter for macbook pro model A1260

    Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
    My adapter has reached the end of useful life.
    Thanks!

    You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
    The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
    The DVI connector  connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
    http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
    You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

  • How to find part number on Motherboard?

    Hi all - I've got a G4 MDD dual 1g mac that I fear has a bad motherboard. I have done some preliminary research into buying a replacement board, which leads me to my question (2-parter):
    1. Can anyone tell me how to find the part number or identify the motherboard in this computer? (so I don't buy the wrong thing)
    2. Other than eBay, can someone recommend a good source for finding a replacement board?
    Any info would be MUCH appreciated. Thanks in advance!

    G4ce,
    The part number is at the end of PCI card slot 5. It will say "APPLE COMPUTER 820-nnnn 2002" (or 2003).
    820-nnnn is the part number, it'll always be 820 in the first part, but the last 4 digits can be different depending on model and manufacture date. Typical values are 1308, 1440, 1445.
    If you're planning to re-use your existing processors, the new board number should match exactly.
    I say"If" because you may find a complete MDD or one sold without certain parts a lot easier than the exact model number board.

  • R835-P56x motherboard Part number

    Toshiba R835-P56X
    Part number PT324U-008003
    I need a motherboard but there is no part number on original motherboard. would anyone know the part number or know where i can go to find out what it is? Its a I5 systemboard
    Thank you
    Solved!
    Go to Solution.

    Portege R835-P56X (PT324U-008003)
       P000542730 or P000549190
    -Jerry

Maybe you are looking for

  • How do I crop a frame in Premiere Pro CS6?

    In FCP, you can crop a frame by going to wireframe and simply adjusting it to crop the image area you want to show. I want to maintain 16:9 but simple make the clip 'zoomed in' to an area that I want. It won't be too drastic of a crop. Does Premiere

  • Workflow Manager Cumulative Update (February) error

    Hi, I've downloaded and installed Workflow Manager 1.0 Cumulative Update and Service Bus 1.0 Cumulative Update. But after installing the updates, I can't access the Library workflow settings page. I'm getting unexpected error. Then after investigatin

  • Help with network pass code

    We have a linksys router (Model # wrt54g) that we have had for YEARS.  We have always had it set up to where we didn't require a password to get on.  However we just recently moved into a new apartment and all of our neighbors are on our network.  At

  • Changing the size of images with a Mac

    Hi, I've became a Mac evangelist after I visited Apple's website for the first time last year. Finally I bought my new MacBook, but I'm not yet using it, because I find it difficult to shift. I'm a webmaster and my website developer told me that I sh

  • L'opération n'a pas pu s'achever. (NSURLErrorDomain erreur -1012).

    Bonjour Je n'arrive plus à faire de mise à jour aussi bien sur mon imac27"  2,8GHZ intel core i5 mi-2010 que sur mon mac boock13"2,13 GHz intel core 2 Duo mi-2009 merci pour  votre reponse