U310 Touch pad functions not working after opening Office 2010

Hey, I've been having problems with loosing my touchpad capabilties after opening office. It doesn't come back until I restart the laptop. I've read many threads and updated my touchpad driver to the latest one I could find for my latop. Any other solutions? Thanks
-Ash

Touchpad was working fine until I install office 2010. A week later, the touchpad is working real funny and not responding at times. I tried restoring a couple of time and problem is still there, Uninstall Office 2010 and problem is solved.

Similar Messages

  • Media Smart touch (tx1005au) function not working after upgrading to windows 7

    I have successfully upgarded my tx1005au vista OS to Windows 7. It seems others things are allright but when i tried to use Media Smart fingure touch to rotate pictures it didnt work however my fingure touch was fine for opeing and closing functions.
    Please suggest me a solution.
    Thanks in advance.

    For Treble&Bass functionality on HDX16 and HDX18 install the Tone Control driver SP45617.exe
    For Touch buttons install QuickLaunch driver SP45058.exe
    Before installing Tone Control you need to have the IDT audio driver for HDX16/HDX18 installed - SP45011.exe
    Message Edited by ArtAppreciator on 10-23-2009 11:57 PM
    Although I am an HP employee, I am speaking for myself and not for HP

  • Touch-pad "click" not working after waking-up from

    Hi,
    I hope the subject is kind of a give away. Basically, I've finally gotten around to sorting out ACPI for my Dell 9600 laptop. I've configured, via KLaptop, for the machine to go into Standby when I close the lid. This works ok except that when I resume, my touchpad isn't as fully functional as before. In particular, I can't "click" with the pad by tapping on it, as is the normal way I use it.
    I can't imagine why this suddently stops working. Does anyone have any clues? Below is the relevant section of my acpid log, if it helps.
    Cheers
    [Mon May 16 22:05:27 2005] received event "button/lid LID 00000080 00000001"
    [Mon May 16 22:05:27 2005] executing action "/etc/acpi/handler.sh button/lid LID 00000080 00000001"
    [Mon May 16 22:05:27 2005] BEGIN HANDLER MESSAGES
    [Mon May 16 22:05:27 2005] END HANDLER MESSAGES
    [Mon May 16 22:05:27 2005] action exited with status 0
    [Mon May 16 22:05:27 2005] completed event "button/lid LID 00000080 00000001"
    [Mon May 16 22:18:13 2005] received event "ac_adapter AC 00000080 00000001"
    [Mon May 16 22:18:13 2005] executing action "/etc/acpi/handler.sh ac_adapter AC 00000080 00000001"
    [Mon May 16 22:18:13 2005] BEGIN HANDLER MESSAGES
    /etc/acpi/handler.sh: line 36: /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed: Permission denied
    [Mon May 16 22:18:13 2005] END HANDLER MESSAGES
    [Mon May 16 22:18:13 2005] action exited with status 1
    [Mon May 16 22:18:13 2005] completed event "ac_adapter AC 00000080 00000001"
    [/code]

    I think you have to toggle the synaptics driver... if you check the output from X you should have like "Synapitics Device On/Off" if you switch to a console... I'm not sure how to control it, but I have a feeling that shut off and never restarted

  • Touch pad is not working

    【help】
    T440p Windows 7
    bought it in this March.
    touch pad is not working.
    "ThinkPad UltraNav Pointing Device  is unenabled " is said by  "Lenovo Solution Center"
    when open the device manager, Ultranav device can not be found in "Mouse"
    the driver of the  ThinkPad UltraNav is intalled well by  "Lenovo Solution Center"
    I can not use my touch pad even restart my PC.
    BTW, sometimes the keyboard can not working suddenly.
    in that case, when i restart my PC, the keyboard becomes woking.
    Best wishes, any idear will be welcomed.
    Thanks in advance.

    Hi Epco_yangchao,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing an issue with Touchpad on your ThinkPad T440p.
    Boot the system in safe mode and work for a while to confirm if it is working in safe mode.
    Uninstall UltraNav application for Control panel – Program and feature option and restart the system and check if you’re able to see any adapter in Device Manager under Mouse adapter.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Why is my touch screen function not working when using facetime

    Why is my touch screen function not working when using facetime

    Hello megascones,
    After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Restart your device. If you can't restart, reset your device.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Why is the scroll function not working after accessing the voice feature in settings?

    Why is the scroll function not working after accessing the voice feature in settings?

    For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
    If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
    Set the current key and tempo, name the loop, and save the loop.
    Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
    You will be able to transpose the sample as described above, like a regular loop.
    For example - a audio file turned into a loop and transposed:

  • HT204168 touch screen function not working when using facetime

    Why is my iPad touch screen function not working when using FaceTime?

    Hi megascones,
    I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Regards,
    - Brenden

  • My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6

    My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6. The screen is black and it doesn't work.

    Downgrading the iOS is not supported by Apple.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Glide pad will not work after formatting g60-630ca

    Can somebody help? my glide pad will not work after downgrading to xp.  The pad works itself for the mouse but then the scrolls on the side will not.  Please help...

    You need the driver. It is a Synaptics Touchpad and you can use this driver:
    Synaptics
    Here is a link to the General XP Downgrade guide which has a link to all the drivers you need under "Moderate models:
    XP Guide
    The touchpad is hard because Windows does load a basic driver so it does not appear with an error in Device Manager, but the "real" driver is needed for advanced features like scrolling. Be sure you have all the needed Xp drivers, by the way.

  • My touch pad does not work only when using Safari browser. The screen was grey. Help!

    My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
    Someone please help.
    Thanks

    I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and delete cache, history and cookies.

  • My Hp Pavllion dv7 keyboard and touch pad will not work

    Hi. My Hp Pavllion dv7 keyboard and touch pad will not work. Been going on for a few months now. Read in the support forum that replacing the battery might help however it hasnt. Ran updates for Windows Vista and Microsoft Security Ess. Boots up just fine however unable to place in my password to get to my user profile and always have to work from guest......unless I have a USB keyboard handly at the time. I use a USB wireless mouse as well.
    Please help and thank you

    The keyboard and mouse (touchpad) are separate devices which could go bad at the same time but that would be a huge coincidence. I would try reseating the ribbon cables to the motherboard for both. Here is the Service Manual:
    Manual

  • The scroll feature on my touch pad does not work with 4.0. Works in all other apps including 3.6. What hapened???

    I can not scroll through web pages with the scroll feature on my touch pad. It worked in 3.6 and all other programs that I use. I have tried 4.0 twice with the same results, I've restarted, rebooted etc.
    This should not be application dependant but a system function.
    Now I will either roll back to 3.6 where I have troubles with some secure sites or just dump the whole thing and try Chrome.

    I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them.  Even the guest login's trackpad worked perfectly but not the main admin account.
    First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
    So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
    I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
    Solution:
    I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions  to access the old admin users Library But I chose to boot
    from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder  BY Host. It has special hidden files. Other  way is to copy the Preferences folder we'll say into the Desktop.
    I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
    I'm leaving this solution because there's someone else in the MacWorld with the same issue.
    Ted

  • Cannot load the recovery media since my keyboard and touch pad do not work

    My labtop Toshiba C55D-A5392 may have a virus issue which cause the keyboard and touch pad do not function.  initially only a few keys don't work...after a couple days most keys don't work and now no keys are working and the touch pad failed too. I can't even load up windows now.   I bought a recovery media from toshiba and try to reset the laptop to factory settings.  I received the USB drive media from Toshiba, but I cannot load it since I cannot get the laptop into the bios (since my keyboard does not work).  Can anyone help me to resolve this issue?

    Try pressing the fn key and f2 to reach bios
    or
    try a usb mouse from your desktop
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Earbuds with Mic and Skip Functions not working after IOS 6.0.1 update?

    I have earbuds with a mic and skip buttons functions and noticed  that mic and the skip music functions stop working after updating to  IOS 6.0.1. Now when I talk on the phone the mic on iPhone itself is working and not the mic on my earbuds. Also when playing music he skip functions has stop working. Has anyone noticed these problems?

    Phone restart > if that doesn't work then do a reset of the settings. Full restore would be the last option.

  • Pinch open and close function not working after upgrade

    I'm having trouble with the pinch open and close function on my trackpad. It was working fine until I installed the new Google upgrade and now it doesn't seem to be working. Any suggestions. The other functions are working fine.

    Click on the Apple icon at the top left of the screen. Select "System Preferences", then "Trackpad".
    Be sure to select:
    "Pinch Open and Close" in the "Two Finger" Menu...
    Sly

Maybe you are looking for