U330 System Image = System recovery disk?

hi all
i have created a system image into a portable external harddisk for my U330 laptop.
once that is done, i was prompted if i want to create a system recovery disk.
just wondering, do i still need to create a system recovery disk if i have already created an image?
if i want to recover my system, just plug in the hard disk containing the system image during boot-up, and follow the onwards instructions?
also, in what ways is this way of recovering different from the one-key recovery by Lenovo?
pls advise.

if windows vista installed, run one-key recover 6.0.
already got backups, skip "back up" otherwise click that.
select full backup, quick compression and next >
choose the path or leave it default and next >
and start.
after back up ends, restart the application one-key recover 6.0
click "create recovery disc" and next >
select the backup you have and next>
this screen will tell you how much cd or dvd you need, min 2 dvd or 8cd, max 7 dvd or 28 cd. and next>
insert the blank cds or dvds into driver and wait until done.
you may need the system image, you can lose your back-up cd, or  cds may not working after a while, so , i still recommend that you keep the original copy or more than one backup.
size of recovery  cd depens on how much size of disk space you use. its up 2-7 dvd or 4-28 cd.
after upgrading to win7, have you seen new part of hard disk such as lenovo system and backup files included?
http://img194.imageshack.us/img194/8528/99892440.png
one-key recover 6.0 doesn't work on win7, at least for me, but you can try.
i got error when i want to ""an internal program error has occured error code : 0xe0dd001f."
and for that, i'm still working on and waiting for the solution.
http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Onekey-recovery-error-y550-serie/td-p/182...

Similar Messages

  • Can I use HP System Recovery Disks on a new hard drive replacement with a lower storage capacity?

    Can I use the HP System Recovery Disks from my HP Pavilion dv7t-4000 CTO Select Edition Entertaimnent Notebook PC when I replace the failing hard drive with a smaller storage capacity hard drive?  Right now it is a Toshiba 750GB SATA hard disk drive, 5400 RPM, 2.5 inch small form factor (SFF) and I am planning to replace it with the Toshiba HDKCB26 500GB 2.5 inch Hybrid Hard Drive.  I read that I cannot use a System Image to restore the hard drive because it is a smaller capacity then the original Hard Drive. If this is true, it seems that my only option is to use the HP Recovery Disks.

    Hi:
    Normally the HP recovery disks don't work on a smaller hard drive either, but it may be possible in your case if HP offered a 500 GB HDD in that model series.
    No guarantees though.

  • System Recovery disk for Windows 8.1

    Hi, I have upgraded my pc from Windows 7 to Windows 8. Every thing went ok. Now I have upgraded it to Windows 8.1. So far every thing went fine. However, can some one tell me how I can create a System Recovery Disk at this stage? I have managed to create
    a Recovery Drive USB stick. 

    Hi,
    According to your description, I suggest you use system image backup to create a System Image.
    You may refer to the following steps:
    1.Press Win+Q, search File history. Then click it in the display list.
    2.In the File History control panel that appears, look in the lower left corner. The option you're looking for is System Image Backup. Click that, and the familiar Create a System Image wizard appears.
    Hope this helps.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • U110 System Recovery Disk

    Hi,
    How can I create a System Recovery Disk for Lenovo U110?

    OneeKey can be invoked in tow ways: One when the system is off, and anotehr within windows. When you press NOVO button when the system is off , I  mean the OneKeyRecovery button, you get two option OneKey Antivirus, and OneKey Recovery. If you press OneKey recovery it will set you laptop to factory default, meaning wiping out all your apps that you installed.
    Within Windows, if you click on Onekey Recovery, there is an option which creates bootable CDs/DVDs. That CDs/DVDs will have all uoir apps that you installed. I don't have U110; but I have S10 and U330. I have tried the DVD option and it works great.
    I hope I have answered all your question. I don't know , like the other folks, how to screen capture and post it here.
    Thanks 

  • The system recovery disks I made for my HP dv7-1132 NR running Vista Home Premium 64 bit won't work.

    I just bought this laptop and I want to wipe the drive clean. It is an HP dv7-1132 NR with Vista home premium 64 bit but still on Service Pack 1. It came with no system restore disks so I made my own through the System Recovery Manager. Apparently the disks were created without any problems as there were no errors.
    When I tried to use the first disk however (by inserting the first disk into the dvd drive and re-starting the computer, Once it has re-booted I get the message:  
    "This PC is not supported by the system recovery disks. You will not be able to recover this system with these disks"
    Can anyone help me help me to either get these discs working or give me another work around that will wipe this hard drive? I am not a techie so my knowledge base is rudimentary. If you can give alot of detail in any possible fixes, that would be great!!!1
    Thanks. and Happy 4th of July Americans!!!!

    Usually this is caused by missing info in the BIOS and must be corrected by service from HP. Enter BIOS by tapping away at the F10 key immediately after power on. Is all system info there,serial,etc?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Running System Recovery Disk

    I had to replace the hard drive on my HP G72 notebook . Then I ran the three system recovery disk that came with the laptop and after that process is finished and the computer restarts it  proceeds straight to  a message that reads no bootable device found insert boot disk and press any key. Any feedback on this problem would be appreciated. Thank You     

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • System recovery disk failure Toshiba C655-S5300

    I tried using the FACTORY system recovery disks on my son's Toshiba C655-S5300 laptop.  During the installation of the first disk, the installation appears to bog down and stop.The disk drive begins "chugging", and will keep doing so. I terminated the recovery and made the mistake of reformatting the HDD.  Therefore, I cannot perform a system recovery form the HDD.  A subsequent try at recovery resulted in the exact same thing at the same time in the recovery process.
    I thought that maybe the HDD was bad, so I tried it on a spare HDD of identical specs.  It does the same thing on that HDD!  Both HDDs appear to be still functioning well, so something else is wrong.
    Does this mean that the factory recovery disks are bad?  What other things can cause this?  What other options do I have to restore my son's computer?
    Thanks for any help you can give me.
    Dave

    It does sound like the most likely cause is bad recovery discs. However, there could also be a hardware failure in the laptop such as the optical drive although this is less common.
    - Peter

  • I have an HP Pavilion DV 4000, I need a System Recovery Disk

      can ou help with an Pavilion DV4000 System Recovery Disk ???

    Hello Kooniebug,
    You can go to HP.com, type in your product number and you should be able to order the disks.
    You can call HP at 1-800-HPINVENT
    If the disks are not available you can go to www.restoredisks.com and order them.
    Let me know if this helps.

  • Recreate a system recovery disk

    Can get a good deal on 32GB MicroSD Memory Card + SDHC Adaptor. Is this sufficient as a system recovery disk?
    This question was solved.
    View Solution.

    JW0829 wrote:
    Can get a good deal on 32GB MicroSD Memory Card + SDHC Adaptor. Is this sufficient as a system recovery disk?
    That's sounds close but to be sure you should first attempt it and then it will tell you how much space you need from the device you pick to make the REcovery to.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • System Recovery disks not installing on new SDD drive

    Hi
    I have upgraded from the original HDD drive to SDD drive.
    I firstly cloned the old drive and installed the image but then windows updates would not work.
    Looking at all forums and tried everything I read but updates still didn't work.
    Finally formatted the drive and then used the original system restore disks that work fine on the old hard drive but Windows end up retsarting continuously after all 3 disks installed .
    It is trying to finish off the installation but then gets and error and restarts and just loops over and over.
    Is it something to do with the 4 k sectors?
    Do I need other drivers?
    How do I factory re-install my Windows 7 on the new SSHD drive?
    Thanks

    Hi
    > Finally formatted the drive and then used the original system restore disks that work fine on the old hard drive but Windows end up restarting continuously after all 3 disks installed
    Usually the Toshiba Recovery disks should install the Toshiba image on the new HDD or SSD drive and the unit should boot properly.
    To be honest, Im not quite sure why the notebook keeps restarting after the installation.
    But I assume it has something to do with the partitions and partitions sizes.
    Fact is that Toshiba recovery disks would format the HDD (or SSD) and would create the same partitions and partitions sizes.
    In case the system installation would not function using the Recovery disks, I would recommend you trying to install the system using the Microsoft clean Windows CD. The essential drivers could be downloaded from Toshiba EU driver page.

  • Can't reinstall Windows 7 with Operating System Recovery Disk x120e

    Hi,
    I dabbled with Ubuntu on my Thinkpad x120e, but found that the dual-boot was unneccessary.  I (likely foolishly) followed directions online to use EasyBCD (http://www.makeuseof.com/tag/nongeeks-guide-safely-uninstall-ubuntu-dualbooting-machine/) to overwrite GRUB.
    Of course, now Windows won't load!  I get an error
    Windows failed to start...
    1. Insert your Windows installation disc...
    2. Choose your language..
    3. Click "Repair your computer"
    If you do not have the disc, ...
    File: \Boot\BCD
    Status: 0xc0000098
    Info: The Windows Boot Configuration Data file does not contain a valid OS entry.
    I got the Operating System Recovery Disc from lenovo (thanks Lenovo for sending it) and copied it to a USB as the computer has no DVD drive.  When I start the computer from the USB and select run from USB, it begins to load Windows, then Lenovo Rescue and Recovery 4...but then it crashes and restarts.  When I hit f8 and startup in SafeMode, it begins to load the safemode screen, but then also crashes. 
    Any advice on what to do??  Many thanks.

    Hello,
    If you are okay with erasing the contents of the hard disk drive, you can try booting to a Windows Command Prompt, running DISKPART.EXE, selecting the hard disk drive, and issuing a "clean" command, which will erase the disk so that the operating system can be reloaded.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • NoteBook HP 620.How can you make a System Recovery Disk on HP 620 Notebook?

    The HP620 model is possible to recover the system using F11. This utility formats the hard drive and reinstall Windows 7 on the hard drive.
    My question is:
    You can make a copy on a DVD media operating system, such as is done with the Recovery Disk Utility on the desktop models?

    Hi,
    Click the Start Menu, open All Programs and scroll down the list to see if you have a folder called Recovery Manager - if you do, open it and see if it contains an applications called Recovery Disc Creator.  If you have this application, double click it to launch the program which should then guide you through the process of creating a set of Recovery Discs.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Dv9720 wont boot / cant use system recovery disk

    when trying to start system recovery, I get a 0x400110020001005 error and the system shuts down.  Is this a hard drive error or MB problem?
    thanks
    v/r
    cjl

    It's the recovery disc that we've made.  If you go on the support and drivers area of website it explains this and says to order new recovery discs.  I am having the same issue and so have ordered the discs and hope they work!
    Mine is doing the exact same thing so it's almost like it's caught in a loop.  When I reboot I have to use F11 to get back into system recovery and then get almost the same error message.  Just a few numbers changed and I suppose that is b/c we have different notebooks.
    You can use ctrl alt delete to reboot and then also try to run some of the other commands..I went in b/c I am also getting bootmgr is missing and is the setup it wasn't turned on any longer, but it still didn't help.  Anyway, I am waiting for my discs and hope they get me going again.  Good Luck!

  • Vista System Recovery Disk Boot USB CD 32-bit Utility Suite PC REPAIR

    need boot usb drive

    Hi Richard, 
    I'm sorry you had to go through some pretty emotional trauma with your U410 getting stolen and all. However, I do hope you are back on track now. 
    I haven't been as unfortunate as you. However, I need to restore Win 7 on my U410. I have with me the recovery disks purchased from Lenovo. My question is, were you able to get the image onto a USB disk to perform the restoration? If so, could you point me to some instructions? 
    Seriously, Lenovo ships laptop specific recovery images on optical disks for their laptops that do not have optical drives. Makes no sense to me. It's time they sell recovery images on USB drives. 

  • Windows update does not work after using System recovery disk

    I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
    Solved!
    Go to Solution.

    I get errors saying A problem is preventing the troubleshooter from starting.
    That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
       Trouble with reinstall of Win7 64 on a L505-ES5018
    The fix was to install a new hard disk driver.
       Intel Rapid Storage Technology
    -Jerry

Maybe you are looking for

  • I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone I need to enable. Thanks.

    Question I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone and I think I need to enable. I can't log on to Citibank to pay my bills using Firefox or Safari for that matter. Citibank say

  • I cannot add a new pop email account in my "iphone 6"

    I cannot add a new pop email account in my iphone, when i confirmed "saving account" it is automatically being closed and kick-out me from? It is iPhone 6 and the system is iOS 8.1 I am going to select "Others" and then my user name, password and "ne

  • Back-up mail, in case of ...

    I use mail. It is fitting my needs and works overall fine. But, because I have by now years of e-mail stored in the different accounts, I tend to get a bit worried. Mail is basically a database that contains links to e-mails stored in various places.

  • Renaming ICC profile in CS6

    Hi, I'm trying to simplify my print profile names. I can edit filename in Windows 8, but  not the embedded ICC name that comes up in the print module. Is there a way to do this?  thanks, James

  • Lightroom 5 re~install

    I had a problem during the setup on Lightroom 5 and needed to remove the installation. I have the serial number but starting over at www.adobe.com/go/getserial does not help. Anyone have the link to download Lightroom 5?