U330 Touch - Manufacturer number?

Hello ,
I've got a little question about the different U330 Touch versions,
I'm looking for the
grey
i5 4200u
128gb ssd
win 8.1 preinstalled
version of the U330 Touch
So I figured out that 59405810 is the orange version of the one I'm looking for, what is the number of that version in grey?
Until now I found:
59393202 grey version with win 8.0
59405811 grey version with win 8.1 but only i3 and hybrid hdd
I also figured out that
5939xxxx are versions with 8.0
and
5937xxxx are the older versions with hybrid hdd
Thanks, I hope you can understand my issue

I'm starting to doubt that this version is existing in grey...

Similar Messages

  • Cannot install windows 7 (downgrade from Windows 8.1 on Lenovo U330 Touch)

    Hello.
    I wanted to downgrade my new Lenovo U330 Touch from Windows 8.1 to Windows 7 (x64 Home Premium). I followed the instructions from this previous forum post...
    https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/U330-Touch-Downgrading-to-Windows-7/m-p/15...
    I accidentally deleted the partition with Windows 8.1 on it by mistake. Good riddance to it.
    Now, when I try to install Windows 7 from the boot sequence, I get the message saying that "Windows cannot be installed to this disk. The selected disk is of the GPT partition style".
    How do I install Windows 7 please?
    Solved!
    Go to Solution.

    benpatient wrote:
    Hello.
    I wanted to downgrade my new Lenovo U330 Touch from Windows 8.1 to Windows 7 (x64 Home Premium). I followed the instructions from this previous forum post...
    https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/U330-Touch-Downgrading-to-Windows-7/m-p/15...
    I accidentally deleted the partition with Windows 8.1 on it by mistake. Good riddance to it.
    Now, when I try to install Windows 7 from the boot sequence, I get the message saying that "Windows cannot be installed to this disk. The selected disk is of the GPT partition style".
    How do I install Windows 7 please?
    I have tried this a few months ago. You can study the steps and try it on your unit.

  • Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?

    Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?

    No.
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How do I highlight phone numbers, in documents such as .pdf or pages or numbers, so I can call that number simply by touching that number?

    I save a document into my iPhone 6's pdf reader, such as a pages, word, excel doc   Sometimes the phone numbers are highlighted, so that I can call the number just by touching that number.  Other times the phone numbers are not "live."  How do I make the phone numbers work?

    If I go to my notes app ( not a note in a contact) and I add a phone number and tap done the number becomes live.  However if I then copy the live number from the notes app and try and paste it into the notes field in a contact it is no longer live.  Weird huh

  • I have here an iPod touch Model number a1288 but the last number to me also looks like a 3. But that isn't my point. I'm here asking this question,. I broke my screen today and I was wondering if it mattered or not if i put on a ipod touch 2nd or 3rd then

    I have here an iPod touch Model number a1288 but the last number to me also looks like a 3. But that isn't my point. I'm here asking this question,. I broke my screen today and I was wondering if it mattered or not if i put on a ipod touch 2nd or 3rd then LCD and Screen. I really don't want to buy a new iPod and i've had this for a long time and its still working fine for me. Ijust need something that will play my music at work. Please someone helpp.

    You can check your model here: iPod Touch - Wikipedia, the free encyclopedia
    and search this place for parts that would fit.

  • External Manufacturer number field in vendor master (EMNFR)

    Hello Experts
       I am trying to search for a field  External manufacture number i.e EMFNR , I checked in OBD3 this field is maintained as a mandatory field I can see this field in LFA1 table But when I go to XK01,I can't see this field in cantrol tab is there any other setting I need to do for activate this field ?

    Hi Expert,
    The Field you mentioned is not correct, it is LFA1-EMNFR and You need to change the Field Status for the Client level to activate the field. That is done in the T-Code: OB23.
    There select the Option - Double Click - Create Vendor (Centrally) and then try again with T-Code: /NXK02..
    This will solve your issue..
    Regards,
    GK
    SAP

  • U330 touch screen randomly not working

    My laptop is U330 touch. Recently, I found that my touch screen function randomly works. When I start my computer, it works but when I put my computer asid, after the turning off of display, the touch screen cannot work. And then I turn the computer off or turn to sleep and restart, the touch screen works again. Is that there any setting goes wrong? Can anyone teach me how to solve this problem?

    Do you have a screen protector applied in which case try peeling it back?
    If there is very high humidity where you are it might be worth immersing device in bowl of dry rice for 24 hours as in this thread: http://talk.maemo.org/showthread.php?t=44517
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • U330 Touch - SSD Question

    Hi, I recently bought a U330 Touch i7. I hadn't realized that it shipped with a HDD/SSD combination drive. When I booted it up I found the main OS installed on the HDD along with a load of other applications, then on the SSD drive was only  McAfee and a load of drivers. The HDD is 500GB (or near enough) and the SSD 25GB. The unit is ST500LM000-1EJ162. THe SSD appears as a separate driver in file explorer but seems to be a partition of the main HDD in disk utility.
    I have a couple of questions that I can't seem to find answers to by looking around on the site:
    1. Should I just install the applications I am most likely to use straight onto the SSD - so MS Office, Chrome, Unity and a couple of steam games - assuming the benefit on having them on the SSD is going to be worth it.
    2. I was told by someone it might be a hybrid drive and the migration of software from the HDD to SSD would be handled by some software. Is it a hybrid drive?
    3. Can I actually reinstall the OS directly on the SSD and would the benefit be worth the hassle of the reinstall?
    4. If I do re-install can I get the installation files for the OS and associated software that shipped with the machine from Lenovo direct?
    Sorry for so many questions, but its my first SSD and there seems to be a lot of conflicting information out there.
    Thanks in advance.
    Solved!
    Go to Solution.

    You don't want to use the WD as the recovery drive, you want to use a flash drive.  Recovery and the factory load should fit on a 16 Gb flash drive. This will be used to refresh or repair the OS if you ever have the problem of not being able to boot.
    The WD should be used to backup your current configuration since it will be so large.  As you do Windows updates and install more programs and save more files, this backup should be replaced on the WD on a regular basis.
    The recovery flash drive will only be used to boot and install the original OS that your machine came with, or to repair or refresh the OS. Then you will use the backup from the WD to put the current OS back on.
    Once you make the flash drive, I would test it to make sure it boots and goes into the recovery environment.
    Again, the WD will only be used for backing up your current configuration and should be updated regularly.
    I've never tried to use an external hard drive as a recovery drive, it might or might not work.  The instructions are pretty specific so I doubt that it will
    You're welcome to try it though.
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Manufacturer number in purchasing tab in mm01/02/03

    Hi experts,
    the manufacturer number field in the purchasing tab in mm01/02/03 is not displayed. Where can I do the customizing to let it show?
    Best regards,
    Fan

    Hi Jürgen,
    I have already tried that. Still I do not have the field. In purchasing tab the "other data/manufacturer data" area can be seen. But not the manufacturer number field.
    Thank you for your reply.
    Best regards,
    Fan

  • How do i up date my ipod touch model number MB531LL

    how do i upgrade my ipod touch model number MB531LL

    You have a 2G iPod. Thoase can only go to iOS 4.2.1
    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
      A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later.

  • U330 touch windows 7 downgrade cache ssd

    Hi, ordered a u330 touch and it comes preloaded with win 8, need to install win 7 64bit. 
    Read a few posts here and other sites that they are having issues setting up the cache Ssd through the Intel rapid storage software (accelerate tab missing)
    It requires raid to be enabled on the BIOS does the u330 support raid?
    Has anyone managed to get the cache sad working on win 7 ?
    Thanks

    hi neovo-88,
    Upon checking the specs, the caching method used by the U330 Touch is Expresscache. To test if Expresscache s working, open a command prompt and type eccmd -info. It should return a result like this:
     - Link to picture
    The Expresscache feature is a proprietary software that's preloaded on the machine so there's no guarantee that it will work on another version of Windows. However, you may try to follow this guide on how to re-install it.
    As for the caching software via the Intel Rapid Storage Technology (acceleration tab), this will not work as it requires RAID to be enabled in the BIOS (which the system doesn't have).
    - Link to picture
    Hope this helps
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Ideapd U330 touch gibt hochfrequente Geräusche ab (fiepen)

    Hallo ihr,
    das Ideapad U330 Touch meiner Freundin fiept. Man hört es nicht allzu laut, aber natürlich, wenn man alleine im Raum ist. Woran könnte das liegen, was ist zu tun? Lüfter läuft nicht, und es ist eine SSD verbaut. Auch das Netzteil ist nicht angeschlossen.
    Danke und viele Grüße, Joner
    Edit by Mod: Betreff etwas geändert
    Gelöst!
    Gehe zu Lösung.

    Hallo Joner,
    Danke für deine Anfrage.
    Deine Beschreibung des hochfrequenten Pfeifftons weist auf folgende möglich Komponenten hin:
    -  Lüfter
    -  Festplatte/SSD
    -  Netzteil
    -  Grafikkarte oder Mainboard hin.
    Du kannst also nur ein Ausschlußverfahren durchführen oder direkt unseren technischen Support kontaktieren.
    http://support.lenovo.com/de/de/contactus
    Gruß
    Michael

  • Disable RAID U330 Touch

    I have just bought myself a U330 Touch with the intention of installing Debian on it, in common with all my other computers.
    My intention was to install on the 16GB SSD that is paired with the 500GB disk. 16GB is plenty big enough for linux.
    My question is how do I disable the RAID on the SSD so that I can partition the system? There doesn't appear to be any option in the BIOS setup. I have a Debian Live running and that cannot see the SSD.

    Hi TusonP,
    Welcome to Lenovo Community Forums!
    I’m sorry to inform you that the partitions cannot be created unless and until UEFI setting in the BIOS is not disabled, restart the computer and press “F2” to enter BIOS and then in “Boot” windows disable UEFI to and new OS (Operating System) can be installed, however it is not recommended to create partitions as it may affect the “Hidden Recovery Partition” preset in the computer and the OKR (One Key Recovery) button will not work as expected.
    Hope this helps!!!
    Do post us back if the issue still persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • U330 Touch SSD Upgrade

    Hallo,
    Ich hätte eine Frage zum Aufrüsten meines Ideapad U330 Touch i3. Es ist eine HDD verbaut. Ich würde gerne eine SSD einbauen, und die HDD komplett darauf klonen, so dass auch Systemfuntionen wie "One Key Recovery" darauf funktionieren. Ist dies grundsätzlich möglich, sind alle im Handel verfügbaren SSDs geeignet, oder gibt es eine White List? Beim Umbau würde ich gerne wissen, ob die original verbaute kleine SSD als Cache in die HDD integriert ist oder ob diese extra entfernt werden muss? Muss im Bios weiteres außer dem AHCI Modus eingestellt werden?
    Vielen Dank für Antworten auf die vielen Fragen,
    freundliche Grüße, Joner
    Gelöst!
    Gehe zu Lösung.

    Hallo und willkommen,
    wie die HDD entfernt werden kann steht im HMM u330p_touch_hmm.pdf
    Es ist wahrscheinlich eine HDD Hybrid Festplatte also wo eine SSD als Cache integriert ist.
    Also braucht nur die HDD ausgebaut werden. Jede 2,5" Sata SSD passt die sind mittlerweile alle 7mm hoch.. und passen trotzdem in ein Notebook mit nur 5mm hoher HDD , wie z.B. in meinem Yoga 2 ..
    Zum Thema klonen ... damit das OKR hinterher auch funktioniert sollten die Partionen die gleiche Grösse wie auf der HDD haben... also die kleinen Partitionen vorne ... und der Teil wo sich der OKR Teil befindet...meist ganz hinten ..versteckt... auf keinen Fall automatisch anpassen lassen, sonst findet OKR hinterher keine Recovery mehr...
    Wie ich das meine kannst Du hier in dem Artikel entnehmen ...Du brauchst aber nur den Teil wo es um das eigentliche klonen und Partitionen geht dir anzuschauen...
    Festplatte zu SSD klonen  
    Ich hoffe das die Antworten dir reichen ..
    Grüsse KK
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • U330 touch

    Does the new u330 touch have aq backlit keyboard? it says in the featurs you can selected a model with a backlit keyboard, but i cant find the option to select it when customising the product. please help
    Solved!
    Go to Solution.

    Dear customer
    Yes ,Exactly
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • How to create several DB sessions, in ApEx 3.0

    Hi, I need more than one DB session in ApEx 3.0. When I used ApEx 2.2 I can changed using dads parameter: PlsqlMaxRequestsPerSession. Now it doesn't work. I set it 1000, and when I test it in 3 computers, adding data in temporary table, i can see the

  • Execute a VO '4' times and show the result in single table at once.

    Hi, I want to execute single a VO query multiple times with different parameters and show the results together in a Table at once In Detail I have a table to which is associated with a VO. The VO contains SQL whose WhereClauseParameters need to be dy

  • Application Safari Quit Unexpectedly

    I load a website, and when I'm ready to click on other links or tabs on the website a window pops up and mentions the following: The application safari quit unexpectedly. Mac OS X and othe applications are not affected. Click reopen to open the appli

  • Flashing adapter led lights - not charging

    Often (but not always) my charger flashes orange-green-orange-green etc, and the symbol in the toolbar tells me 'battery is not charging'. I had to replace my charger recently, but it was doing it with a spare that I was borrowing too. I hoped it was

  • Client status 300 not modifiable for us jobattributes infotype

    Hi Gurus, We are in ECC6.0 and recently applied HRSP22.After this,my client was not able to create jobcode in PO03.When i select us jobattributes infotype and click create Client status 300 notmodifiable message was there.I checked T000 and no change