U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed

so i did a fresh instal of windows xp pro sp3.
device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything.
i have installed the 2 broadcom drivers for windows xp listed on lenovos website. i made sure that wireless switch is on, and fn+f5 wireless option is set to on as well.
LAN shows up. and so does the 1394 on the network connections, but no wireless.
(note: on my server 2008 os, the new windows troubleshooting instructed me to turn on a specific service, which then enabled my wireless to work.)
however i cant seem to find a way to get the wireless to work.
Could someone tell me all services exactly need to be enabled for the wireless to work? and why does the network controller still show up on device manager even after i have installed the drivers?
please help, totally lost.

Your "yellow" device is Bluetooth, not WiFi.
Fn+F5 utility work depends on both of them, so you need all drivers to be installed before it will work.
Install bluetooth drivers for your model. Also, your WiFI also may be Broadcom (Gemtek) and you may be trying to install Intel WiFi.
//help will save the world

Similar Messages

New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

New release of QuickVPN client version 1.4.0.5 for windows 7 is not working properly.
We can not connect; instead we receive this message:
"Remote Gateway is not responding, do you want to wait?"
Dear Cisco,,,,
Your release is not complete; please correct issue and advise after it has been tested.
Rgds, EM

Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE the error above. If not, than any other problem you have. Follow all the hints here in this thread.
If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
Juergen
Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
Fortunately, I never was a Cisco partner, only a poor user ;)

Re: HP 15-d053sr drivers for Windows 7 x64 not installed

Hello!
I have the same problem!!!
Notebook HP 15-d053sr, Product No. F7R72EA#ACB, Serial No. [edited by Moderator], Bios Version F.11
On clean install Windows 7 x64, Can't install all Chipsets, USB 3.0 and Video drivers! Error message: "This computer does not meet the minimum requirements for installing the software"
On clean install Windows 8.1 x64 Can't install "IMEI" (sp64344) driver and maybe more!
HP Support Assistant find only 4 drivers (Atheros Bluetooth, Wireless LAN, Synaptics TouchPad and Realtek Audio drivers)...
Need working, supported, compatible drivers for Windows 7 x64!
Please HELP!!!

Hi @Ainars_LV ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Skype for Windows 8 will not work

Hi. I have a HP laptop with Windows 8 already installed. It'When I first got the laptop my skype worked fine but a few weeks ago I logged out and it won't work. This message appears everytime I try to log in: "Ooops... there was a problem. Please restart skype or try again." This happens after an extremely long loading time. I uninstalled and reinstalled Skype for Windows 8. I tried this several times and it still will not work. I greatly appreciate any help.

The same thing is happening to my Skype on new Windows 8 Ansus Laptop. Can someone at Skype please resolve this issue.

Dual-Boot; Restart and boot other o/s USB devices not working

I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
System no hang or occur any error/BSOD message.All startup programs run as normal.
I tried to re-plug usb devices but notting happens... Still not working
But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
After power up PC and boot with windows 7 all usb devices works normaly.
I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
I'm sure other H/W is OK, but I thnik this mobo have a fault.

Thank you for reply.My PC system specs:
CPU:    Intel Pentium G3258 3.2ghz
Board:    MSI Z97-G43 /Bios: Ver. V17.7
MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
VGA:    Sapphire AMD Redeon HD6670
CASE:    Zalman z3 plus white (5x 120mm fan)
PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
COOLER:    Akasa 92mm PWM Blue Led
OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
I think msi z97-g43 mainbıoard have a problem.

Downloaded drivers for the MS6570 do not WORK - HELP!

Hello,
I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php
and from:
http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
I appreciate any info.

I appreciate everyone's reply....
Here is what I have done.
I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
Thanks for any help again.

I have win 7 pro and the download for jre 7u10 does not work on Firefox17, I have installed and uninstalled, but works on internet explorer.

I have uninstalled jre7u10, the latest version of java, and re-installed this several times and it will NOT work on Firefox 17. I have checked that the plugins are downloaded in the add-ons tab and made sure they are Enabled. I have tried disabling every plugin I have on the page, but it still will NOT run on FF 17. So, I have uninstalled jre7u10 in windows control panel. I got the jre7u10 download for windows 7 from the actual java website.
I don't know what else to do. I am totally confused as to why it works on Internet explorer but not Firefox 17. It gives me an error message on a chat window on one of my sites that says error client class not found, But I DON'T get this error when I use Internet explorer because the chat window works with it. HELP PLEASE ???????????
I am not that good with computers so take it easy on me please.
Thanks in advance

I questioned that 64 bit version thing and when I checked the download it sent me to the java version 32 bit for windows 7. The download of jre 32 bit works for my computer on internet explorer but not for firefox 17. I also checked firefox and there is not a 64 bit version browser. so I don't get this at all. anyway, I don't know what a 64 bit vs a 32 bit means but someone asked me to check that too on the site I went to they thought it might be different browser. It's not.

IPod formatted for windows... not working on mac! ***????

Hi all...
My iPod mini was my first apple product over a year ago... worked awesome on my Dell laptop. Then I got this Dual Core G5 and the dang thing isn't recognizing any music?!?! Because it is formatted for windows, I can't install an update it is telling me it needs. I am assuming this is why itunes can't see it and my kick butt G5 is being ******** with not showing any of the music on it... any ideas?
I have read the other threads and can't find anything like this... so how can I use this thing on both machines? or did Apple "F" this thing up?
Thanks

Yes, it shows up on desktop but only the calendar, notes, contacts are accessible...
No, iTunes does not recognize it even if I force it into Disk Mode... weird. I am beginning to think I need to keep it on the mac 100% and stop using it on me PC... but that stinks? My Dell is portable, this G5 is not!

IPhone Config Utility 1.1 for Windows: Cert Chooser not working for SSL

I have installed the iPhone Configuration Utility for Windows 1.1 and I cannot add SSL certificates into Configuration Profiles. The Certificate Chooser opens, but there is no way for me to add an SSL certificate. Blank list and no button to browse or add a certificate.
Any solutions to this? Has anyone else seen this? I have tried repairing the installation, and uninstalling/reinstalling the application to no avail.
Sorry to open a new post for a supposedly closed topic, but the old thread does not contain any real answer...just an 'I fixed it myself' post with no description of the solution.

Hi Aaron,
Did you open a TAC case for this?
Escalations team found a problem with the format of the xml file in a very similar issue reported in a TAC case. The format needs to be as below:
<?xml version="1.0" encoding="utf-8"?>
9905
9.0.3
http://server.domain.com/update/CiscoJabberSetup.msi
or just:
9905
9.0.3
http://server.domain.com/update/CiscoJabberSetup.msi
Thanks,
Maqsood

Spotify for Windows Phone 8 Not Working

Hello, I have installed the Spotify app for Windows Phone 8 but it does not work. When I try and log in, it says that I need a premium account error code 409. I tried uninstalling it and reinsallting it and it still does not work. I can log in and use spotify radio on my ipod touch with no problem. I tried logging in with my spotify user name and my facebook user name and both give the same error. I have an AT&T Nokia Lumia 920 Windows Phone 8 smartphone. Thanks.

Ummm, maybe if windows phone requires a premium membership (which i understand was probably because of microsoft trying to push xbox music) maybe you should go ahead and stop advertising that its free for 'mobile' on the spotify app. you know since at this moment i have the mobile app and would require premium. specify apple and android. or continue to get a load of complaints and some bad reviews (incase you haven't noticed your windows marketplace rating recently dropped to 2.5 stars.

In SSRS , after exporting report in excel,wrap text property for cell and freeze column for SSRS table header not working in Excel

I am working no one SSRS my table headers are freeze cangrow property is false and my report is working perfect while rendering data on RDL and i want same report after exporting in Excel also , i want my table header to be freeze and wrap text property
to work after exporting in my report in excel but its not working ,is there any solution ? any patch ? any other XML code for different rendering ?

Hi Amol,
According to your description, you find the wrap text property and fix column is not working after exporting into Excel. Right?
In Reporting Services, when exporting to excel file, it has limitation for textbox.
Text boxes are rendered within one Excel cell. Font size, font face, decoration, and font style are the only formatting that is supported on individual text within an Excel cell.
Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
In this scenario, it supposed to be wrap text unless you merge cells. If cells are merged, word-wrap does not work correctly. If any merged cells exist on a row where a text box is rendered with the
AutoSize property, autosize will not work. For the Fix Data Property, it can't be working in Excel. These are features when exporting to Excel. We can't change it because it's by design.
Reference:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Drivers for ATI HD2600 PRO not working fine on Bootcamp

Hi!
I´m installing Bootcamp drivers on my iMac (2.0 and upgrading to 2.1) with Windows Vista Ultimate 32bit. The thing is that in the device administrator, my graphic card (ATI HD2600 Pro) is named ATI HD2600XT. Also, I can see a few lines when having a white screen on my monitor, like the refresh rate was not correctly configured.
There´s any way to fix this error by downloading any aditional driver?
Thanks in advance,

Hi-
The 9800 Pro is plug and play in OS X.
Did the eBay seller state Mac compatibility?
As for testing, the card is installed and either provides video through the DVI and VGA ports or it does not.
There must be power connected to the 4 pin Molex connector on the top corner of the graphics card.
A reduced ROM card won't display an error screen if power is not connected. It won't display anything at all.
A full ROM version will display a default error screen.
*Power must be connected*.
There was an individual here recently, who bought a 9800 Pro from someone on eBay who stated Mac compatibility, but sold an unflashed, vanilla PC card. There is no picture unless the card has been flashed with Mac ROM.
If power is connected to the molex connector, and all other conditions (taping, installation, cabling) are normal, I would return the card as DOA.

Hey guys please help me out in serious need wifi and bluetooth of my iphone 4s its not working toggle switch of both are showing any diplacement

Hey wifi bluetooth stopped working in my iphone 4s please need in serious help for it

Well, a couple of things...
First off, noise gating is rarely--if ever--going to yield perfect results for the application you're suggesting. I'm not just talking Audition--I'm talking every hardware or software noise gate I've ever used. The change in ambience as the mic opens and closes, coupled with the inevitable clipping of the beginnings or ends of words makes it a not-very-good tool for voice recording. I tend to use it for things drum kits with multiple mics but rarely for voice.
If I was you, before looking for an electronic solution, I'd be seeing what gains you can get with a physical re-arrangement of your recording set up. Obviously, I don't know the details but things like adding a pop screen, moving the mic a bit farther from the desk, making sure the papers you shuffle are in the null of the mic, perhaps hanging something soft behind you to deaden reflections, etc. may pay bigger dividends than noise gating.
Having said all that, setting up a gate tends not to be something I do by numbers but, rather, adjust by ear and instinct. Perhaps if you could post a brief sample of an untreated voice, we could have a play. Alas, this forum doesn't support direct uploads of audio so you'll have to use one of the many services that allow you to post for downloading...things like Dropbox or Box.net.

LJ 3600 drivers for Storage Server 2008 not working

we have several LJ 3600 printers in our environment and would like to install these on our new server:
Win Storage Server 2008-64-bit
but have had no success printing with any drivers out there.
I have certainly tried the host-based drivers
All I ever get is a page: @PJL SET JOBATTR=JobAcct4=20110426125259...etc
can you suggest a new driver to use?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
thank YOU for any help you can offer!

OK.
I can't help you with the drives then. That is out of my realm of knowledge. If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
As for the graphics driver...
Download and install this free file utility.
http://www.7-zip.org/
After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
Select 7-zip to Extract to: and let it extract the file into a folder. I let it extract to the file name of the folder.
Then just follow the rest of my instructions to install the driver.
Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed

Similar Messages

Maybe you are looking for