U330p touchpad too few options under Windows

Hey,
I bought my u330p some days ago and can't get my touchpad correctly working under Windows.
The problem that I have is that I want to use a 2-Finger tap as right-click and a 3-finger tap as middle click. I'm using the Elantech driver from the driver site from lenovo, but I had to manually select Elantech because the installer would do nothing.
So I had to go to C:/drivers/Touchpad Driver(Synaptics, Elan)/ELAN
and then install that.
The problem with these drivers is that there is no option for 2-finger tap or 3-finger tap, only clicking.
I'm using Windows 8.1, I also tried the driver under Windows 7 same result.
Then I installed Ubuntu and that worked without a manual driver download. So Is there a way to get the touchpad working like I want it to under Windows? Because there kinda has to be when linux dev's got it working.

I already tried that but sadly it doesn't work. Weirdly enough it isn't even the right driver, because in the device manager it shows as Microsoft PS/2 mouse, but when the driver is correctly installed it should show Lenovo pointing device.
After all that experimenting with my drivers, I can't get back to a working touchpad... Now not even 2 finger scroll works.
Edit: I kinda know why scrolling with 2 fingers doesn't work anymore. The Driver-Software has a yellow triangle with a !
And if I go into the Elan tab under Mouse the device doesn't show up. Has anyone a idea how to atleast go back to where I was?
I tried uninstalling the driver/ or using a earlier version, not the actual Software but the driver itself in the device manager.

Similar Messages

No library panel option under windows menu PC signed in to cloud

I have photoshop at home and work I want to use shape captured on my ipad noticed no library panel option under windows menu.
in general Cloud, Bridge andLlibraries confuse me obviously not the same but after viewing tutorials more confused.
Damian Burns smart and stupid at the same time!

Chris and Gener7here are my system details below
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2491 MHz
Built-in memory: 8074 MB
Free memory: 5400 MB
Memory available to Photoshop: 7045 MB
Memory used by Photoshop: 60 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Disabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
thankyou for trying to help me
Damian Burns
Sent from my iPad

How to get Ant option under windows- Preferences in Eclipse Luna?

Hello Eclipse Support,
I switched from Eclipse Kepler(windows 64-bit) to Eclipse Luna(eclipse-cpp-luna-SR2-win32-x86_64.zip) and I see that Ant option is missing under windows->Preferences.
I tried this way:
I saw there was an Apache ant(eclipse\plugins\org.apache.ant_1.9.2.v201404171502) plugin in Eclipse-Luna package like in Eclipse-Kepler.
I tried to install it through Help->install new software. I was unsuccessful even by giving local path point to the plugin directory of eclipse - it showed error msg stating "could not find file at the location that I had selected"
or
the path from apache-ant website(followed the instructions available in ant website to install).
Could you please let me, whether I am doing wrong and If yes, then what are the right steps to acheive this?
Thanks & Regards,
Rashmi

Hi,
I found the answer within the eclipse forum.
My beginning search was not optimized and so, could not reach this post.
https://www.eclipse.org/forums/index.php/m/628964/?srch=No+Ant+Editor#msg_628964

Photoshop CS3 has no Print Option under Windows 7 64 bit

Owing to a severe power problem with my old desktop I have had to buy a new desktop PC, which has Windows 7 64 bit installed. My previous desktop has Windows XP.
I have successfully installed CS3 and have been able to open and manipulate images but when I come to print anything the Print option(s) are all grayed out! The options I am talking about are:
Page Setup
Print
Print One Copy.
Has anyone else experienced this?

Hi John,
I did nothing out of the ordinary when installing CS3 (that I know of). I don't recall being presented with options that gave me cause for concern.
This problem occurs when I run CS3 ordinarily and also when I right click and run it as an Administrator.
I'm a little wary about installing an emulator on top of my 'nice clean installation'. I guess I'll have to bite the bullet though. I'll definitley follow through on your link to the MS XP emulator.
Thanks.

Extra microphone options under windows 7

Hi, i have a creative soundcard PCI Express X-Fi Titanium Fatalty Pro Series, and on the newest drivers it says that it adds
Adds?Silencer, a noise-cancelling?technology for use?with Creative Fatalty Professional Series Gaming Headset MK II.<
Adds?VoiceFX, a voice-morphing feature.<
I got them in windows vista, but why cant i get them in windows 7? any ideas? need to no asap, as i was ment to be? hosting a party, and need these options!!

,_ I got these options by using the newest drivers available on the Creative Labs' site located here......
?http://support.creative.com/downloads/download.aspx?nDownloadId=0933
I then ran the software auto update, and I noticed that it says for CONSOLE Launcher 2.6.30, that it adds new audio features, such as "SILENCER....." etc, exactly as you were looking for. This update is also for Windows 7. Sounds like you might have a plan.........
and here is the link.........http://support.creative.com/downloads/download.aspx?nDownloadId=056
This is also what I use in Windows 7 and Vista 64.
Message Edited by jmacguire on 08-7-2009 0:26 AM

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

HT1414 I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my OC runs under Windows 8.1. IOS 7.1. Someone can help me, please?

I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?

It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant.

I have Windows XP Pro as my Bootcamp option under Snow Leopard. If I upgrade to Lion will I still be able to use this Bootcamp Windows XP operating system as I dont have Windows 7 yet

I have Windows XP Pro as my Bootcamp option under Snow Leopard which works very well indeed.
I would like to upgrade to Lion but am concerned re its lack of support for Bootcamp Windows XP
Can I upgrade to Lion and boot into my old Windows XP BootCamp partition as I do at present OR
must I buy Windows v7 and install under the new Bootcamp system.
Also what happens to my Snow Leopard Time Machines backups - can I see them under Lion?
Many thanks
Peter B.

Boot Camp- Some computers require Microsoft Windows 7

Why is extension not a drop down option for me under window (window extension) in Illustrator CC 2014?

Why is extension not a drop down option for me under window (window > extension) in Illustrator CC 2014?
I need to open an extension I have downloaded and added to the Adobe Extension Manager CC but the extension option on the window drop down is not present.

SUCCESS!! I figured out that you need the Application Frame option checked in order to achieve the layout I like. Silly me.

MacBook Pro 1,1 will not wake up under Windows XP

I have an "old" macbook pro 1,1 (one of the first Intels) with ATI Radeon X1600 128MB and I am having trouble with it waking from sleep under Windows XP bootcamp.
This is a similar problem as in this thread:
http://discussions.apple.com/thread.jspa?threadID=2306325&tstart=1
I have seen that there is a similar problem with iMacs which may have been solved by updating the EFI firmware to 1.4
http://support.apple.com/kb/ht3561
"Update addresses issues where iMac computers with ATI Radeon HD 4850 graphics intermittently stop responding and addresses wake-from-sleep issues in Boot Camp"
The problem is that my macbook pro is version 1,1 and the latest EFI firmware for updating is 1.2. as seen here:
http://support.apple.com/kb/HT1237
1. Can I install a firmware which is higher than 1.2 with my mac?
2. Is there anything else I can do to solve this problem?
3. Would updating the ATI Radeon x1600 graphics drivers help?
Please Help!

Hey there,
i know it is an old Thread but i had the same Problem a few Moments ago. Don't know if it helps everyone but i just moved the 3 .AEX files from the Pluginfolder to another Place. This solves the Start-Up Problem. Rename is not an Option because Premiere finds the renamed files. But if you move them in another Folder Premiere 1.5 starts (compatibility set to XP SP2)
BUT: I dont know which effects this will cause inside the Program. I just wanted to export an existing Project again. Start-up, loading the Projectfile and loading the original clips and pictures works. So far the export seems to work too.
regards
Edit: Sorry about the capital letters. I am German

Firefox 6 running under Windows 7 64-bit does not render fonts correctly.

The default sans-serif font for Firefox is Arial. Running Firefox 6 under Windows 7 32-bit, the font renders properly, but under 64-bit Win7, the font is too heavy, and bold or strong makes no difference. I run Win7 64-bit on a laptop computer and use Firefox 5 on it, and the fonts render properly. Possibly a Firefox 6/64-bit problem?

Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
* [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
* [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help]

Unable to calibrate X201t pen under Windows 8

I am unable to calibrate the pen of my X201t any longer. The first time I click the "Calibrate" button in Tablet PC Settings the white screen with the crosshair markers in the four screen corners appears but it always disappears by itself within seconds (i.e. before I even have a chance to hit any corner). Apparently this thing crashes, because subsequent clicks on "Calibrate" are then always ignored. (i.e. there is no reaction if I click the button again). A reheat brings this back as described, i.e. for a single time and for a few seconds only.
Please advise, what I can do to get this operational again, as I urgently need to recalibrate my pen as its calibration is increasingly off and it gets harder and harder to use it decently.
This is on a X201t running Windows 8 Pro (x64 version).

Hi, mmo
I would recommend booting the machine into Safe Mode to see if the calibration works here. As the calibration program keeps crashing quickly, it sounds like it is a software issue, and attempting the calibration while in Safe Mode is a good step.
To boot into Safe Mode in Windows 8:
Open the Charms Bar on the right-hand side.
Select Settings.
Select Change PC settings.
Select General.
Scroll to the bottom of the right-hand pane.
Select Restart Now under Advanced startup.
Select Advanced Repair Options.
Select Troubleshoot
Select Advanced Options
Select Windows Startup Settings
Click Restart.
Upon rebooting, press 4 to boot into Safe Mode or 5 to boot into Safe Mode with Networking (allows Internet access.)
Try using the calibration here and see if it goes any better for you.
Best of luck,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Problems with saving a html webpage under windows 7

Hello people,
Ik have the next problem. When I an webpage witch I have made for instanse webpage.html open and I change something in it en I wanna save this changes in my webpage I get the next message (maybe the translation is not the right one) An error occurred while accessing E:\users\name\websites\MFC936D.tmp.
This tmp file has every time a different name. The site is not saved (webpage.html) but the html page disapeares when I click the eroor message away. And the tmp file displays in the map where the files are being saved.
My dreamweaver cs4 runs under windows 7
I hope someone can help me.
Thanks a lot.
Bart

E: is another partition were I save my data too.
The file is maybe read only you say. But 2 things sometimes it saves right after I have tried it a few times. And second I have started dreamweaver with administration rights, so you think he has all the rights. But the sme thng happened.

All-in-one driver installation fails under Windows 7

I am trying to install the all-in-one printer driver for Windows 7, 64-bit, Service Pack 1. I have downloaded the installer from HP (AIO_CDB_Net_Full_Win_WW_130_141.exe), downloaded it using HP Print and Scan Doctor 4.3 and using the HP Printer Install Wizard (hppiw.exe). All methods fail. My computer is a new Dell Inspiron (Intel i5-4440 @ 3.1GHz, 8GB RAM, 64-bit OS). The printer I am installing for is a HP 6310, which is old but which has worked well for years under Windows XP. I don't think the printer is an issue since the installer never reaches the point of scanning for hardware.
Symptoms:
Installing using the downloaded installer, the initial splash screen displays. Selecting "Install" displays a second screen with several progress indicators beginning with "Checking system...". After checking for a few seconds, an error box pops up complaining that it can't find a file named "hpzpnp.ice_suffix..exe".
There are two files in the Setup directory named "hpzpnp01.exe" and "hpzpnp04.exe". The Autorun file contains many references to an %ICE_SUFFIX% environment variable.
I guessed that the installer executables did not have enough privelege to set environment variables, so I went through the installer directories and set all the executables to run with administrator privelege.
After that, running "Setup.exe" from the top of the install tree, the initial splash appears, followed by the second "checking system..." progress display. Then a new window with advice about keeping firewalls turned on, etc. pops up. Continuing from that point pops up a new error box saying:
"The specified path is too long C:\Program Files (sLar dig mer med hjalp av en demo pa skarmenHitta enkelt dina foton med onskad metod-Datum, Markning, Mappar, Sok, Favoriter)\HP\."
I have done this multiple times, and the parenthesized phrase (Swedish?) is sometimes different, but always wrong. It looks to me as though the installer is trying to decide whether to install 32- or 64-bit drivers, but can't decide which. It fails to initialize a string variable and concatenates garbage onto the "C:\Program Files" path string.
I have also seen an error box with the following error near this point:
"C:\Users\Sid\AppData\Local\7zS4689\Setup\hpzrein01.exe" "-wStub" "3...
"The parameter is incorrect."
Clicking OK on the error box aborts the installation.
Installing using the HP Printer Installation Wizard produces the same error message as the initial attempt with the downloaded installer about missing files with names containing "ice_suffix".
Installing using the HP Print and Scan Doctor progresses as far as the "path is too long" message.
I've done this now many times, trying different things, without success. After each attempt, I run the Uninstall_L4 utility in utils\ccc under the installer tree, then run the OS Disk Cleanup utility. Following an earlier post, I installed the latest version of Flash Player, with no change in symptoms.
Any fresh ideas would be much appreciated.

Hi ehildum,
Thank you for the time and effort you put into your post. I can see you have done plenty of troubleshooting on your own, but I do have an idea.
If the USB cable is plugged in this could be causing issue. Assuming it is connected, let's unplug and take a look at the Device manager. The hpzpnp.ice_suffix indicates a plug and play 'pnp'.
Follow these steps and let me know what happens.
Click on Start
Right click on Computer
Select Manage
On the left panel, click on Device Manager
Click on View at the top and select Show hidden devices
Look in the list for Other devices
If you see the printer here, right click and select uninstall
Look in the list and click on the arrow next to Printers
If you see the printer here, right click and select uninstall
Delete all files in the %temp% folder
Restart the computer
Open the installer from your download (AIO_CDB_Net_Full_Win_WW_130_141.exe)
Do Not plug the USB cable in until the software says so.
Please let me know the outcome of these efforts. If your USB cable was not connected please complete the above steps anyway to see if there is something stuck in the Device manager that could be causing the conflict.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Mac doesn't boot after splitting BOOTCAMP drive under Windows 8.1

Macbook pro mid 2012, OS X Mavericks
I've installed Windows 8.1 x64 using Bootcamp assistant. In Windows I went to Disk Management and shrank drive C: from 200 GB to 94 GB and created a new drive D: from unallocated space.
After restart Windows doesn't boot giving some error and quickly restart. If I hold "Option" key I see only Windows. Mac OS X disappeared.
How to fix?

So, I've tried 1001 ways to recover. Nothing worked. Interned Recovery gives -2002F error. Macbook pro 2012 can't boot from bootable DVD to use DiskWarrior, Drive Genius or similar. It can't boot from OS X Lion install DVD. I had only Windows PC to fix this. So
I asked a friend with latest Mavericks(which I had too) to make a Recovery USB and make a DMG file from it and send me over internet. Then I used the TransMac application under Windows and burned DMG on my USB stick. My god it worked. After 2 days of struggle I found this solution. I was able to boot from this USB stick into Recovery Mode and from there I can reinstall Mac Os X Mavericks. Somehow it sees my Ethernet cable and doesn't give error.
Note: that Disk Utility wasn't able to recover partitions. I tried to run DiskWarrior from terminal but it gave me an error. TestDisk didn't run too. So I'm doing a clean installation.
I could recover or backup my files using Paragon Mac Recovery Bootable DVD, but there was no need since it's my new macbook and I didn't have much files there.
Windows had changed the HD partition map from GUID Partition Table(GPD) to MBR. And made HD a "dynamic disk". This is why Mac Os wasn't able to boot.
If anyone knows how to convert a disk back to GPD and make Mac OS able to boot please let me know. I'm still installing Mac Os X on USB stick and didn't change my HD.

U330p touchpad too few options under Windows

Similar Messages

Maybe you are looking for