U401 touch windows 8 audio driver unable to install error could not find divice for this driver

u401 touch windows 8 audio driver unable to 0wau05w8.exe install error could not find device for this driver
kindly advise

hi karthi2lenovo,
Welcome to the Forums.
If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
1. Open Device Manager (press Winkey+R > type devmgmt.msc)
2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
3. As an alternative, try this conexant driver from station-drivers:
Conexant High Definition Smart Audio
Version 8.64.59.52 (Win8)
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

It says "can not install the driver: could not find media for this driver"

I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says "can not install the driver: could not find media for this driver", how ever i get a beep for every error message. In my device manager there is no UAA and in services.msc windows audio is started.
I have tried almost everything on net but not able to solve this, plz help.

vendor wrote:
= No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
I think there is not.
Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
jutapa

Anyone have this error "could not find information for this machine" when re-installing Lion on a new Mini?

as above
anyone face the same problem and have a fix?

What kind of Mini Mac is it ?
Is it a PPC mini mac ?

Error "Could not find a capable video driver. Update display drivers." in Pr CS6

Please help! I can't open my Pr CS6 - keep on getting error "Could not find a capable video driver. Update display drivers." How do I fix this?

Display driver http://forums.adobe.com/message/4943624 may help
For the future, please list this information when asking a question
Information FAQ http://forums.adobe.com/message/4200840
You need to post the EXACT brand and model of your graphics card, and the device driver number
If you have nVidia...
How to determine your nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install.

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.

The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list.

Satellite A205 S4797 - can not find drivers for my drive

I have recovery disks and Windows Vista installation disk. When I try to install error meesage says it can not find drivers for my drive.
I tried scannong CD drive and it cannot find them do 32-bit, 64-bit all have different drivers and if so where do I get the one I need if not from the install disk or recovery disk from manuf.?

If you cannot use original Toshiba recovery DVD for OS installation I can imagine there is some problem with DVD itself (some missing file or scratch) but Microsoft Vista installation MUST work on this notebook model.
If this doesnt work too there must be some problem with HDD. Just if you want to install WXP you need to load SATA driver at start-up but Vista must work.
Can you please tell me what happen when you try to install Vista from Microsoft Vista installations DVD?

Everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.

Hi guys,
I need some everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.
Kind regards
Ian

One correction, from the icloud I was not able to listed to the entire song. So when you purchased the song if it wasn't downloaded to your library, chances are you have lost your opportunity to listen to it.

Windows 7 64-bit Installation Error "Could not find appropriate listener"

*11.2.0.1* Installation fails on Win7 Professional 64-bit
1) Installed software (did not create database initially)
2) Create Listener via Net Config (no apparent problems here)
3) Added DB to Listener via Net Mgr
4) dbca fails in final portion of DB creation. Error states: *"Could not find appropriate listener for this database. Configuring DB control requires database to be registered with at least one listener.*
My Listener services is started.
All current updates have been applied to Win 7.
I have searched around and found similar issues that seem to center around adminstrator rights, but I have not been able to make any progress.
C:\Users\scott_hp>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 10:16
:11
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1522
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 09:47:07
Uptime 0 days 0 hr. 29 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\app\scott_hp\product\11.2.0\dbhome_1
etwork
\admin\listener.ora
Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.195)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "mmodb.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully <gphmh>
Edited by: svk1965 on Feb 20, 2012 7:17 AM
Edited by: svk1965 on Feb 20, 2012 7:22 AM

svk1965 wrote:
FIXED!! *Thank you very much.* I followed your instructions, renaming listener.ora, before the lsnrctl start. I then waited and ran dbca and walked through the configuration screens and this time it processed through to 100%. But I am not sure I understand what caused the issue??
C:\Windows\system32>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:34
:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1521
The command completed successfully
C:\Windows\system32>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:36
:51
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\al
ert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 11:36:56
Uptime 0 days 0 hr. 0 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Windows\system32>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:39
:30
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 11:36:56
Uptime 0 days 0 hr. 2 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
Services Summary...
Service "mmmodb.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status READY, has 1 handler(s) for this service...
Service "mmmodbXDB.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status READY, has 1 handler(s) for this service...
The command completed successfullyThe db instance will register itself with the listener every minute or so. When you first start the listener, it will have to wait until the next cycle of the instance self-registration before it (the listener) knows about the db instance.

Unable to Delete Folder, Could not find this item

Currently, I'm having problem deleting an old Folder. Previously, I used its parent as a shared folder, but one day when I tried to clear that folder there is one folder that has duplicate. The problem is one of them (the old one) can't be deleted even after
I deleted all files/folders in that folder, I can't remove/rename that folder (could not find this item) not even with cmd as Administrator. I've tried to defrag my Windows Sever 2012 but the problem still persists. How to fix this problem?
Thanks in advance.

I had this same problem using Server 2012 Std. I tried various options of taking ownership of the parent folder because the Security properties of the folder I was trying to delete were blank, using CMD and Dir /x etc. I even tried sharing
the parent folder and then using Server 2008 R2. None of them worked. When I tried Dir /x Server 2012 doesn't show the 8 character filename with the ~1. I tried typing it in myself, but that didn't work either. I then found that there was a space at the end
of the folder name. I then tried all the CMD options again using a space, still no luck. Then I finally stumbled upon this solution:
Open CMD and then type:
rd /s "\\?\D:\bad\folder\path "
example: rd /s "\\?\D:\Sharedata\folder1\folder2 " - note the space after folder2 as per the space in the folder name. Obviously D: is the drive that has the folder on it.
This worked for me
I've had a similar problem as detailed above; a power shell script that I wrote incorrectly tested for the existence of a directory and created multiple instances of the same directory.
I can confirm that the post from Rayza73 works like a charm!
@Rayza73: First up thanks for the information. Would it be possible for you to describe how the command is able to find and delete the directory?
Many thanks
Shaun

ITunes unable to install? - Could not access network location %APPDATA%/.

Okay, I received a never used iPod Nano
(Model MC034LL ,Version 1.0. 2 PC, it looks like this http://www.iphonemag.ch/wp-content/uploa…
for Christmas this year, however; I'm having some trouble installing iTunes.
I have already downloaded iTunes, but installing seems to be the problem.
The 'iTunesSetup' icon appears on my desktop and I double-clicked it to begin the installing process.
When I do so, it says
"Gathering required information... Status: Computing Space Requirements"
after a few seconds it says, "Could not access network location %APPDATA%/."
As soon as I click 'retry' it says the same thing.
If I press cancel, the same message pops up and then it says,
"iTunes Installer Completed
The installer encountered errors before iTunes could be configured.
Your system has not been modified To retry these operations at a later time, please run the installer again.
Click exit to finish the installer"
I tried the help page for iTunes, but noting seemed helpful.
Message was edited by: Seraph6886

Could not access network location %APPDATA%/
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
[You receive an "Error 1606" error message when you try to install or remove a Microsoft program|http://support.microsoft.com/kb/886549]

Install error "could not install some modules:"

After I finsihed install I got some errors one was saying somthing exception related to Zip and then after second run I get
Warning - could not install some modules:
Core Modeling Library - The module named com.tomsawyer.module/1 was needed and not found.
Core Modeling Library - The module named org.antlr.module/1 was needed and not found.
I try to reinstall with the option "repair install" and after that I still get the same error.
by the way I installed both jdk and the ide. I have an older jdk still on my computer.

Thanks for response!
To start the Application Server, open a terminal
window
or command prompt and execute the following:
asadmin start-domain --verbose domain1 The comand window starts with C:\documents and settings\administrator, should I firstly change it to C:\ ? and how to change to C:\ ?
Or, on Windows, you can choose
Programs -> Sun Microsystems -> J2EE 1.4 SDK -> Start
Default Server No, in my Programs menue, there's no Sun Microsystems.
Says Starting and Stopping the Application Server
chapter of The J2EE 1.4 Tutorial:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
I browsed the tutorial, it doesn't provide such a trouble shooting.
Are you sure that you have application server
installed?Ths install procedure was successfully finished without any error message. Also, I can see J2EE is in my Control Pannel\ Add Remove\Program list.
What should I do? Thanks!
Jenny

Skype 6.16 install error: Could not write value to...

hello, i have a windows 8 PC and ive been using skype since i got it and now all of a sudden when i try to open skype it says installing version 6.16 then it comes up with an error that says
"Could not write valur displayicon to key
\Software\Microsoft\Windows\CurrentVersion\Uninstall\{7a3c7e05-ee37-47d6-99e1-2eb05a3da3f7}.
Verify that you have sufficient access to that key. or contact your support perosnnel."
Please help me with this error, ive looked it up everywhere and i cant find anything for it
Solved!
Go to Solution.

Try this in order to update your Skype to the currently latest 6.18.0.105 version:
http://community.skype.com/t5/Windows-desktop-client/Impossible-to-install-v6-13-0-104-Error-1603/m-...
Be aware that if you want to install the currently latest 6.18.0.105 version, then you should use this msi-installer link in order to extract the Skype.exe and Login.cab files:
http://download.skype.com/msi/SkypeSetup_6.18.0.105.msi

Install Error: Could Not Write Value to key

Could not write value to key \IPodManager.IPodManagerUI.1\CLSID verify that you have sufficient access to that key, or contact your support personnel.
I am running as an administrator. Please help?

For "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Trying to install Panther, could not find DVD player

While trying to install panther 10.3 if would get to the end and give the message that there were errors installing the software. I was asked if it would play a dvd and found out it wouldn't. The dvd icon would come up but when i clicked on it there would be a couple of things video and audio. Nothing would work and then I tried to find the DVD player and it wasn't in applications or anywhere else I could think of.
I don't have the original 10.2 disks, just the 10.3 upgrade.
Any ideas?

I replaced the CD with another and it works fine -- I guess its the drive.

Unable to purchase " appname " could not be purchased at this time. Please try again later.

Hello Apple support community,
Since I upgraded my Ipad 3 (64GB + Cellular) to IOS 7 , i cant purchase or install free apps from the app store. My app store region is Turkish and i am subscribe to itunes match.
However after searching the web for a little bit i found the solution, i had to change my language to Turkish on my ipad to match store region language, now i can install free apps or purchase apps.
My problem is i don't want to use my ipad in Turkish language, how can i change my language on my Ipad back to English and still be able to purchase apps from the app store ?
I am also running IOS 7 on my iphone 4s with Turkish app store and English for my phone language, i can use the app store without any problem. The problem is only on my Ipad.
Note: All my idevices running 7.0.2
Thanks in advance for your feedback.

Solved :
Restore Ipad and set it up as new Ipad. Install all your apps and setting again.

U401 touch windows 8 audio driver unable to install error could not find divice for this driver

Similar Messages

Maybe you are looking for